A3P125-1TQ144 - 125K Gate ProASIC3 FPGA | Microchip
部品番号: A3P125-1TQ144 ✓ 生産中A3P125-1TQ144 概要
A ProASIC3 flash FPGA is a reprogrammable semiconductor that stores its configuration in nonvolatile flash memory rather than relying on an external configuration PROM. Within the product hierarchy, it belongs to the FPGA and CPLD class of programmable logic devices and uses flash-backed configuration to support a single-chip implementation. The architecture allows the same finished board to be programmed or updated without relying on volatile configuration memory.
Key device characteristics include 125,000 typical gates, 100 configurable input/output pins, and a core voltage range of 1.425 V to 1.575 V. The ProASIC3 family also provides system-level programming features, low-power operation, and a small-footprint option. These attributes are important when a design needs moderate logic density without the resource requirements of a much larger FPGA or the external configuration circuitry of a conventional SRAM FPGA.
The A3P125-1TQ144 belongs to the 125K gate class and is identified by the -1 ordering suffix and TQ144 package code. It uses a 144-terminal TQFP package with a 0.500 mm terminal pitch, and the package is designed for surface mounting. The device is programmable through the ProASIC3 development environment using a compatible programmer or JTAG programming interface. Configuration storage and JTAG access support repeatable manufacturing, field updates, and controlled design revisions.
Typical uses include industrial control and interface logic, embedded protocol bridges, sensor-conditioning systems, compact communications equipment, and low-power electronic modules. The 100 I/O count can support parallel digital interfaces, while the 125K gate capacity can accommodate control state machines, arithmetic logic, datapath control, and multiple peripheral interfaces. Designers should still partition the design against the device's actual logic and I/O limits before committing to a board layout.
A critical implementation consideration is that the TQFP footprint requires accurate escape routing and fine-pitch assembly. Keep programming access, configuration control, decoupling, and I/O signal integrity within the constraints of the manufacturer's board-design guidance. Confirm the exact pin assignments and voltage requirements against the device pin-description tables before fabrication, and validate both configuration integrity and I/O timing in hardware.
ドロップイン代替品: A3P125-1TQ144 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: A3P125-1TQ144 (同一形状・フットプリント) — 相違点: Configuration Memory, Package, Process Technology, Programming Interface, Device Type.
A3P125-1TQG144
✅ ドロップイン📋 参考代替品(カタログ未掲載)
A3P125-TQ144
✅ ドロップイン価格はお問い合わせください
データシートを見る →A3P125-TQ144I
✅ ドロップイン価格はお問い合わせください
データシートを見る →A3P125-1TQ144I
✅ ドロップイン📋 参考代替品(カタログ未掲載)
A3P125-1TQ144YI
✅ ドロップイン📋 参考代替品(カタログ未掲載)
A3P125-1TQ144 最大定格&電気的特性
| Device Type | ProASIC3 flash field-programmable gate array |
| Typical System Gates | 125,000 gates |
| Logic Array Blocks | 3072 LABs |
| Configurable I/O Pins | 100 pins |
| Core Supply Voltage Range | 1.425 V to 1.575 V |
| Configuration Memory | 36864 bits |
| パッケージ | 144-pin TQFP, 20 mm x 20 mm |
| Terminal Pitch | 0.500 mm |
| 実装タイプ | Surface mount |
| Process Technology | CMOS |
| Configuration Technology | Nonvolatile flash |
| Reprogrammability | Supported |
| Startup Feature | Instant On |
| Programming Interface | JTAG |
A3P125-1TQ144 144-pin tqfp, 20 mm x 20 mm ピン配置ガイド
A3P125-1TQ144 (144-pin tqfp, 20 mm x 20 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: A3P125-1TQ144.
詳細は データシート をご参照ください。
主な用途
A3P125-1TQ144 の用途: 6 件s: Industrial Control Logic, Embedded Protocol Bridge, Sensor Conditioning and Acquisition, Communications Equipment, Programmable Security and Access Control, LED Sign and Display Control.
Industrial Control Logic
The A3P125-1TQ144 fits compact industrial controllers that require deterministic state-machine logic, multiple parallel interfaces, and nonvolatile configuration. Its 125,000 typical gates and 3072 LABs provide room for sequencing, interlocks, data conversion, and supervisory logic, while 100 configurable I/O pins can connect digital sensors, actuators, and field-bus interface components. The 1.425 V to 1.575 V core range must be paired with the I/O and configuration rails required by the chosen design. Because the configuration is held in flash, the controller can resume operation without loading a separate volatile configuration PROM, supporting controlled field updates and repeatable production testing.
おすすめ
Embedded Protocol Bridge
A3P125-1TQ144 is suitable for protocol-conversion modules that translate between parallel buses, serial links, and application-specific control signals. The 125K gate class can support parallel-to-serial engines, command parsers, FIFO-like control paths, and status registers without requiring a large processor-based implementation. With 100 configurable I/O pins, a compact module can expose several chip-select, interrupt, clock, and data signals while using the flash-backed configuration for field update capability. Design effort should focus on confirming the available I/O standards, clocking resources, supported I/O voltage combinations, and timing margins required by the selected external interface.
おすすめ
Sensor Conditioning and Acquisition
The A3P125-1TQ144 can implement digital signal conditioning around analog front ends, sensor switches, multiplexers, and data-acquisition modules. Its programmable logic resources are appropriate for calibration tables, digital filters, trigger control, status decoding, and communication formatting, while 100 I/O pins provide flexibility for parallel sensor buses and control signals. The flash configuration supports firmware-like logic updates without an external configuration device, which can simplify controlled maintenance. The design must account for the device's specified I/O voltage, drive-strength, slew-rate, and timing limits rather than assuming every peripheral pin supports the same voltage or edge rate.
おすすめ
Communications Equipment
A3P125-1TQ144 can be used in compact communications modules for framing, channel control, clock-domain management, and lower-rate signal processing. Its 125,000 typical gates are suitable for implementing multiple protocol engines or supervisory datapaths when a dedicated processor is unnecessary. The 100 available I/O pins support high-speed parallel interfaces, memory or peripheral control, and status signaling. Nonvolatile flash configuration allows the logical function to be updated during production or maintenance, but timing closure remains essential: verify internal clock limits, I/O performance, package-related skew, and board-level signal integrity before selecting the operating frequency.
おすすめ
Programmable Security and Access Control
The A3P125-1TQ144 can implement credential checks, keypad scanners, access-event logic, alarm sequencing, and communication formatting in embedded security modules. Its nonvolatile flash configuration allows the programmed logic to be stored directly on the FPGA, while 100 I/O pins support keypads, displays, door sensors, relays, and network interfaces. The 125K gate class is sufficient for multiple control paths and finite-state machines without requiring a large programmable-logic device. Designers should separately validate timing behavior for the chosen I/O standards, define secure programming and update procedures, and confirm that the operating-temperature requirements match the enclosure and deployment environment.
おすすめ
LED Sign and Display Control
The A3P125-1TQ144 is well matched to LED sign controllers, multiplexed display drivers, brightness-management engines, and diagnostic sequencers. Its 100 configurable I/O pins can organize row and column multiplexing, serial display data, brightness control, and status indicators, while the 125K gate class supports refresh timing, pattern storage, and communication protocols. Flash-backed configuration simplifies standalone operation because the display controller can start from its own nonvolatile configuration. The implementation must observe output drive, voltage, and timing restrictions, especially for multiplexed displays, and should include transition, overcurrent, and open-load protection outside the FPGA where required.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: A3P125-1TQ144 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | A3P125-1TQG144 | A3P125-TQ144 | A3P125-TQ144I | A3P125-1TQ144I | A3P125-1TQ144YI |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 144-TQFP (20x20 mm) | 144-TQFP (20x20 mm) | 144-TQFP (20x20 mm) | 144-TQFP (20x20 mm) | 144-TQFP (20x20 mm) | 144-TQFP (20x20 mm) |
| FPGA Family | ProASIC3 | ProASIC3 | ProASIC3 | ProASIC3 | ProASIC3 | ProASIC3 |
| Typical System Gates | 125,000 gates | 125,000 gates | 125,000 gates | 125,000 gates | 125,000 gates | 125,000 gates |
| Terminal Pitch | 0.500 mm | 0.500 mm | 0.500 mm | 0.500 mm | 0.500 mm | 0.500 mm |
| Special Ordering Feature | -1 ordering suffix | -1 and G ordering suffixes | Standard ordering suffix | I temperature-grade suffix | -1 and I temperature-grade suffixes | -1 and YI ordering suffixes |
主な差別化要因
- Compact 125K logic density in a 144-pin TQFP (vs A3P125-1TQG144)
- Nonvolatile flash configuration supports standalone operation (vs A3P125-TQ144)
- Fine-pitch surface-mount integration (vs A3P125-FG144)
- 100 configurable I/O for compact mixed-signal control (vs A3P125-FGG144)
設計ノート
Use the manufacturer TQ144 board-design file as the geometric authority for pad locations, pin numbering, and escape routing. The A3P125-1TQ144 uses 144 pins at 0.500 mm pitch in a 20 mm by 20 mm package, so routing errors can create shorts between adjacent nets or damage fine-pitch lands during rework. Preserve the manufacturer's pad geometry, maintain assembly clearance, and validate the PCB stackup and drill-to-copper dimensions with the board fabricator.
Design the 1.425 V to 1.575 V core rail with the decoupling and sequencing specified in the ProASIC3 hardware guidance. Place bulk and local decoupling capacitors close to their associated supply pins, keep high-current return paths compact, and verify regulator startup behavior against the device's power-up requirements. The core range alone does not describe every I/O or configuration voltage, so each rail must be reconciled with the complete electrical tables.
Do not treat the -1, I, YI, G, or Q suffixes as cosmetic reel or packaging codes. They can indicate different ordering, speed, or temperature characteristics, and a package-compatible part may still be unsuitable if its timing or environmental grade differs. Before substitution, compare the complete ordering information, operating-temperature limits, timing tables, pin map, and qualification status. Also confirm that the programmed bitstream and configuration security requirements remain unchanged.
Reserve clean JTAG access for programming, debugging, and production test even if the final product normally operates from flash. Keep programming signals away from noisy or high-current switching paths, provide adequate ground references, and follow the manufacturer's recommendations for termination and configuration pins. A stable programming interface and power sequence reduce the risk of intermittent configuration failures during assembly and field service.
コンプライアンス情報
Compliance status was not stated for the exact A3P125-1TQ144 ordering code. Obtain the current manufacturer declarations and product-specific material reports before release.