A3P125-TQ144I - 125K-Gate Industrial ProASIC3 FPGA | Microchip
MPN: A3P125-TQ144I ✓ ActiveA3P125-TQ144I Overview
A ProASIC3 FPGA belongs to the programmable-logic hierarchy: FPGA, programmable logic device, digital semiconductor, and integrated circuit. Unlike fixed application-specific integrated circuits, an FPGA combines programmable logic, configurable interconnect, and embedded memory in a device that can be reprogrammed for multiple board and product variations. The A3P125 series combines these features in a relatively compact 144-lead package.
Key resources include 125,000 system gates, 3,072 logic cells, 100 user I/Os, and support for embedded SRAM resources described by the family documentation. Its 144-LQFP package provides 144 physical leads, including power, ground, configuration, clock, and user-I/O functions. Flash-based configuration allows the programmed logic design to be retained in the device.
The A3P125 implements a nonvolatile FPGA architecture on a 130 nm CMOS process with seven metal layers, including six copper layers. Family documentation identifies in-system programming support and JTAG programming through IEEE 1532-compliant configuration. A single-chip implementation can consolidate control logic, interface adaptation, glue logic, and fixed-function logic into a compact 28 mm by 28 mm plastic LQFP package.
Typical uses include industrial control, data acquisition, instrumentation, embedded communications, sensor conditioning, and general-purpose logic consolidation. The 100 user I/Os make the device suitable for designs requiring substantial parallel digital connectivity, while the ProASIC3 family provides a practical path to customized control logic without developing a full custom ASIC.
PCB design should preserve the package pin assignments and power-supply structure defined in the manufacturer pin-assignment and board-design files. Confirm the target board's programmed bitstream, supported I/O standards, clock requirements, decoupling, and programming interface before replacing another FPGA or launching production.
This page consolidates the verified device identity, package and logic resources, same-package alternatives, comparison parameters, programming guidance, and industrial-temperature considerations into a design-focused reference for engineers evaluating the A3P125-TQ144I.
Drop-in alternatives for A3P125-TQ144I — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with A3P125-TQ144I (same form factor and footprint) — differing in Configuration Memory, Package, Process Technology, Programming Interface, Device Type.
A3P125-TQ144
✅ Drop-InContact for price
View Datasheet →A3P125-TQG144I
✅ Drop-In📋 Reference alternative (not in catalog)
A3P125-TQ144IY
✅ Drop-In📋 Reference alternative (not in catalog)
A3P125-TQG144YI
✅ Drop-In📋 Reference alternative (not in catalog)
A3P125-1TQ144
✅ Drop-In ⚠️ Specs UnverifiedContact for price
View Datasheet →A3P125-1TQ144I
✅ Drop-In ⚠️ Specs Unverified📋 Reference alternative (not in catalog)
A3P125-TQ144I Maximum Ratings & Electrical Characteristics
| Device Type | Flash-based FPGA |
| FPGA Family | ProASIC3 |
| System Gates | 125,000 gates |
| Logic Cells | 3,072 logic cells |
| User I/O Count | 100 I/Os |
| Package | 144-lead LQFP, 28 mm x 28 mm |
| Lead Pitch | 0.50 mm |
| Package Height | 3.40 mm maximum |
| Process Technology | 130 nm CMOS |
| Metal Layers | 7 layers, including 6 copper layers |
| Configuration Memory | Flash-based, nonvolatile |
| Embedded SRAM Capacity | Up to 144 kbits |
| Programming Interface | In-system programming and JTAG |
| JTAG Compliance | IEEE 1532 compliant |
| Operating Temperature Range | -40°C to +85°C |
| Packing Media | Tray |
| Logic Family | CMOS |
| Mounting Type | Surface mount |
A3P125-TQ144I 3.40 mm maximum Pin Configuration Guide
Pin configuration for A3P125-TQ144I (3.40 mm maximum package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.
No detailed pinout data available for A3P125-TQ144I.
Refer to the datasheet for full pin configuration.
Typical Applications
A3P125-TQ144I is suitable for 6 applications: Industrial PLC Control Logic, Industrial Data Acquisition, Data Communication Interface, Instrumentation and Test Equipment, Motor and Power Control, Embedded System Control Hub.
Industrial PLC Control Logic
The A3P125-TQ144I fits programmable logic controller and machine-control designs that require deterministic digital sequencing without a full custom ASIC. Its 3,072 logic cells and 100 user I/Os provide resources for interlock logic, state machines, counter inputs, actuator outputs, and communication-interface glue. The -40°C to +85°C industrial range supports equipment operating outside a typical office environment. Place the FPGA beside the power conversion and sensing stages, route I/O according to the manufacturer's pin-assignment file, and provide local decoupling for every supply pin. The 144-lead LQFP package also leaves a larger pin-count option than smaller ProASIC3 packages while retaining a 0.50 mm lead pitch.
Industrial Data Acquisition
The A3P125-TQ144I is suitable for coordinating parallel sensors, counters, data latches, and external memory interfaces in industrial measurement equipment. The 100 user I/Os allow multiple digital channels to be consolidated in one programmable device, while the 3,072 logic cells can implement acquisition sequencing, filtering, calibration tables, and command decoding. Its flash-based configuration retains the measurement configuration across power cycles. For a complete design, assign voltage-tolerant signals according to the manufacturer I/O rules, use the board-design file for physical pin mapping, and keep high-speed or precision analog conversion circuitry separate from the FPGA's switching activity.
Data Communication Interface
A3P125-TQ144I implementations can consolidate protocol conversion, frame generation, buffering, and supervisory logic around existing industrial communication hardware. The combination of 125,000 equivalent gates, up to 144 kbits of family SRAM, and 100 user I/Os gives designers enough parallel connectivity for byte-wide data paths and status control. The industrial temperature range of -40°C to +85°C supports factory equipment with variable ambient conditions. Engineers should define clock domains and I/O standards in the design constraints, check timing against the selected performance grade, and verify the configuration bitstream against the exact ordering code before production programming.
Instrumentation and Test Equipment
The A3P125-TQ144I can serve as the central programmable controller in instrumentation, automated test equipment, and laboratory fixtures where multiple stimulus paths and response signals must be coordinated. Its 100 user I/Os support parallel test channels, while the 3,072 logic cells accommodate timing sequences, counters, status encoding, and command interpreters. The flash-based ProASIC3 architecture permits configuration updates without changing the PCB when product variants require different control behavior. Designers should isolate sensitive analog front ends, use the manufacturer's recommended power and ground layout, and validate signal integrity at each supported I/O voltage with the intended external loading.
Motor and Power Control
The A3P125-TQ144I is appropriate for supervisory and digital control functions in industrial motor-drive and power-conversion systems. Its 3,072 logic cells can implement commutation sequencing, fault-latching, timing, and protection coordination, while 100 user I/Os support encoder inputs, gate-control interfaces, and status reporting. The -40°C to +85°C specification supports demanding industrial environments. The FPGA should not be treated as the power-stage device; instead, use it to supervise isolated gate drivers and sensors. Keep high-dv/dt switching nodes away from FPGA inputs, use appropriate isolation and level translation, and verify every external interface against the selected I/O-standard constraints.
Embedded System Control Hub
The A3P125-TQ144I works well as a compact logic hub around microcontrollers, memory, and peripheral devices in industrial embedded systems. It can translate legacy bus signals, arbitrate access, implement watchdog and power-state logic, and consolidate discrete glue components into one reprogrammable device. The 144-lead LQFP provides 100 user I/Os for moderate peripheral density, and flash configuration supports field updates after programming. Board designers should partition clock domains carefully, apply the manufacturer's recommended input slew and output-load limits, and retain the exact device pin map in schematic and PCB libraries to avoid package-variant mismatches.
Engineering reference data for A3P125-TQ144I — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | A3P125-TQ144 | A3P125-TQG144I | A3P125-TQ144IY | A3P125-TQG144YI | A3P125-1TQ144 |
|---|---|---|---|---|---|---|
| Package | 144-lead LQFP | 144-lead LQFP | 144-lead LQFP | 144-lead LQFP | 144-lead LQFP | 144-lead LQFP |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| FPGA Family | ProASIC3 | ProASIC3 | ProASIC3 | A3P125 ProASIC3 | A3P125 ProASIC3 | ProASIC3 |
Key Differentiators
- Specified for industrial temperature operation (vs A3P125-TQ144)
- Substantial logic and I/O capacity in one package (vs A3P125-TQG144I)
- Industrial-qualified ordering option with the same footprint (vs A3P125-TQ144)
- Flash-based configuration supports persistent designs (vs A3P125-1TQ144)
Design Notes
Create the PCB footprint from the manufacturer package drawing rather than copying a generic 144-lead QFP footprint. The A3P125 TQ144 board-design file identifies a 28 mm by 28 mm package with 0.50 mm lead pitch and a maximum height of 3.40 mm. Check pad length, paste geometry, courtyard, lead coplanarity, and exposed thermal considerations against the production PCB rules before release.
Assign every supply pin according to the manufacturer pin-description table and connect decoupling close to the corresponding package leads. Separate core and I/O supply routing where the family architecture supports distinct rails, and size bulk capacitance from the datasheet's recommended application circuit. Avoid sharing return-current paths with switching power stages so that the FPGA's 130 nm CMOS circuitry is not exposed to excessive supply transients.
Do not treat every A3P125 ordering code as interchangeable merely because it uses the TQ144 package. Check temperature class, performance grade, configuration options, user-I/O availability, and device identification. After changing A3P125-TQ144I to another family member, regenerate the design constraints, recompile the bitstream, and run boundary-scan or in-system programming tests on the assembled PCB.
Preserve the manufacturer's JTAG and configuration-pin routing, including signal conditioning for external programming access. Keep clock inputs away from high-current switching nodes and use short, symmetrical routes for clock distribution. For mixed-signal boards, partition sensitive analog and communication regions from the FPGA, provide a deliberate ground return for each interface, and validate crosstalk and overshoot at each configured I/O standard.
Compliance Information
The exact ordering code and a current manufacturer declaration are required for material-compliance confirmation. No separate automotive qualification is established by the available product information.