A3P125-1TQ144 - 125K Gate ProASIC3 FPGA | Microchip
MPN: A3P125-1TQ144 ✓ Hoạt độngA3P125-1TQ144 Tóm tắt
A ProASIC3 flash FPGA is a reprogrammable semiconductor that stores its configuration in nonvolatile flash memory rather than relying on an external configuration PROM. Within the product hierarchy, it belongs to the FPGA and CPLD class of programmable logic devices and uses flash-backed configuration to support a single-chip implementation. The architecture allows the same finished board to be programmed or updated without relying on volatile configuration memory.
Key device characteristics include 125,000 typical gates, 100 configurable input/output pins, and a core voltage range of 1.425 V to 1.575 V. The ProASIC3 family also provides system-level programming features, low-power operation, and a small-footprint option. These attributes are important when a design needs moderate logic density without the resource requirements of a much larger FPGA or the external configuration circuitry of a conventional SRAM FPGA.
The A3P125-1TQ144 belongs to the 125K gate class and is identified by the -1 ordering suffix and TQ144 package code. It uses a 144-terminal TQFP package with a 0.500 mm terminal pitch, and the package is designed for surface mounting. The device is programmable through the ProASIC3 development environment using a compatible programmer or JTAG programming interface. Configuration storage and JTAG access support repeatable manufacturing, field updates, and controlled design revisions.
Typical uses include industrial control and interface logic, embedded protocol bridges, sensor-conditioning systems, compact communications equipment, and low-power electronic modules. The 100 I/O count can support parallel digital interfaces, while the 125K gate capacity can accommodate control state machines, arithmetic logic, datapath control, and multiple peripheral interfaces. Designers should still partition the design against the device's actual logic and I/O limits before committing to a board layout.
A critical implementation consideration is that the TQFP footprint requires accurate escape routing and fine-pitch assembly. Keep programming access, configuration control, decoupling, and I/O signal integrity within the constraints of the manufacturer's board-design guidance. Confirm the exact pin assignments and voltage requirements against the device pin-description tables before fabrication, and validate both configuration integrity and I/O timing in hardware.
Bộ thay thế dễ dàng lắp đặt cho A3P125-1TQ144 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với A3P125-1TQ144 (cùng hình factor và footprint) — khác nhau ở Configuration Memory, Package, Process Technology, Programming Interface, Device Type.
A3P125-1TQG144
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
A3P125-TQ144
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →A3P125-TQ144I
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →A3P125-1TQ144I
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
A3P125-1TQ144YI
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
A3P125-1TQ144 Tỷ lệ tối đa & tính chất điện
| Device Type | ProASIC3 flash field-programmable gate array |
| Typical System Gates | 125,000 gates |
| Logic Array Blocks | 3072 LABs |
| Configurable I/O Pins | 100 pins |
| Core Supply Voltage Range | 1.425 V to 1.575 V |
| Configuration Memory | 36864 bits |
| Hộp | 144-pin TQFP, 20 mm x 20 mm |
| Terminal Pitch | 0.500 mm |
| Kiểu lắp đặt | Surface mount |
| Process Technology | CMOS |
| Configuration Technology | Nonvolatile flash |
| Reprogrammability | Supported |
| Startup Feature | Instant On |
| Programming Interface | JTAG |
Hướng dẫn cấu hình chân A3P125-1TQ144 144-pin tqfp, 20 mm x 20 mm
Cấu hình chân cho A3P125-1TQ144 (144-pin tqfp, 20 mm x 20 mm gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho A3P125-1TQ144.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
A3P125-1TQ144 phù hợp cho 6 Áp dụngs: Industrial Control Logic, Embedded Protocol Bridge, Sensor Conditioning and Acquisition, Communications Equipment, Programmable Security and Access Control, LED Sign and Display Control.
Industrial Control Logic
The A3P125-1TQ144 fits compact industrial controllers that require deterministic state-machine logic, multiple parallel interfaces, and nonvolatile configuration. Its 125,000 typical gates and 3072 LABs provide room for sequencing, interlocks, data conversion, and supervisory logic, while 100 configurable I/O pins can connect digital sensors, actuators, and field-bus interface components. The 1.425 V to 1.575 V core range must be paired with the I/O and configuration rails required by the chosen design. Because the configuration is held in flash, the controller can resume operation without loading a separate volatile configuration PROM, supporting controlled field updates and repeatable production testing.
Được đề xuất
Embedded Protocol Bridge
A3P125-1TQ144 is suitable for protocol-conversion modules that translate between parallel buses, serial links, and application-specific control signals. The 125K gate class can support parallel-to-serial engines, command parsers, FIFO-like control paths, and status registers without requiring a large processor-based implementation. With 100 configurable I/O pins, a compact module can expose several chip-select, interrupt, clock, and data signals while using the flash-backed configuration for field update capability. Design effort should focus on confirming the available I/O standards, clocking resources, supported I/O voltage combinations, and timing margins required by the selected external interface.
Được đề xuất
Sensor Conditioning and Acquisition
The A3P125-1TQ144 can implement digital signal conditioning around analog front ends, sensor switches, multiplexers, and data-acquisition modules. Its programmable logic resources are appropriate for calibration tables, digital filters, trigger control, status decoding, and communication formatting, while 100 I/O pins provide flexibility for parallel sensor buses and control signals. The flash configuration supports firmware-like logic updates without an external configuration device, which can simplify controlled maintenance. The design must account for the device's specified I/O voltage, drive-strength, slew-rate, and timing limits rather than assuming every peripheral pin supports the same voltage or edge rate.
Được đề xuất
Communications Equipment
A3P125-1TQ144 can be used in compact communications modules for framing, channel control, clock-domain management, and lower-rate signal processing. Its 125,000 typical gates are suitable for implementing multiple protocol engines or supervisory datapaths when a dedicated processor is unnecessary. The 100 available I/O pins support high-speed parallel interfaces, memory or peripheral control, and status signaling. Nonvolatile flash configuration allows the logical function to be updated during production or maintenance, but timing closure remains essential: verify internal clock limits, I/O performance, package-related skew, and board-level signal integrity before selecting the operating frequency.
Được đề xuất
Programmable Security and Access Control
The A3P125-1TQ144 can implement credential checks, keypad scanners, access-event logic, alarm sequencing, and communication formatting in embedded security modules. Its nonvolatile flash configuration allows the programmed logic to be stored directly on the FPGA, while 100 I/O pins support keypads, displays, door sensors, relays, and network interfaces. The 125K gate class is sufficient for multiple control paths and finite-state machines without requiring a large programmable-logic device. Designers should separately validate timing behavior for the chosen I/O standards, define secure programming and update procedures, and confirm that the operating-temperature requirements match the enclosure and deployment environment.
Được đề xuất
LED Sign and Display Control
The A3P125-1TQ144 is well matched to LED sign controllers, multiplexed display drivers, brightness-management engines, and diagnostic sequencers. Its 100 configurable I/O pins can organize row and column multiplexing, serial display data, brightness control, and status indicators, while the 125K gate class supports refresh timing, pattern storage, and communication protocols. Flash-backed configuration simplifies standalone operation because the display controller can start from its own nonvolatile configuration. The implementation must observe output drive, voltage, and timing restrictions, especially for multiplexed displays, and should include transition, overcurrent, and open-load protection outside the FPGA where required.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho A3P125-1TQ144 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | A3P125-1TQG144 | A3P125-TQ144 | A3P125-TQ144I | A3P125-1TQ144I | A3P125-1TQ144YI |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 144-TQFP (20x20 mm) | 144-TQFP (20x20 mm) | 144-TQFP (20x20 mm) | 144-TQFP (20x20 mm) | 144-TQFP (20x20 mm) | 144-TQFP (20x20 mm) |
| FPGA Family | ProASIC3 | ProASIC3 | ProASIC3 | ProASIC3 | ProASIC3 | ProASIC3 |
| Typical System Gates | 125,000 gates | 125,000 gates | 125,000 gates | 125,000 gates | 125,000 gates | 125,000 gates |
| Terminal Pitch | 0.500 mm | 0.500 mm | 0.500 mm | 0.500 mm | 0.500 mm | 0.500 mm |
| Special Ordering Feature | -1 ordering suffix | -1 and G ordering suffixes | Standard ordering suffix | I temperature-grade suffix | -1 and I temperature-grade suffixes | -1 and YI ordering suffixes |
Bảo phân biệt quan trọng
- Compact 125K logic density in a 144-pin TQFP (vsA3P125-1TQG144)
- Nonvolatile flash configuration supports standalone operation (vsA3P125-TQ144)
- Fine-pitch surface-mount integration (vsA3P125-FG144)
- 100 configurable I/O for compact mixed-signal control (vsA3P125-FGG144)
Ghi chú thiết kế
Use the manufacturer TQ144 board-design file as the geometric authority for pad locations, pin numbering, and escape routing. The A3P125-1TQ144 uses 144 pins at 0.500 mm pitch in a 20 mm by 20 mm package, so routing errors can create shorts between adjacent nets or damage fine-pitch lands during rework. Preserve the manufacturer's pad geometry, maintain assembly clearance, and validate the PCB stackup and drill-to-copper dimensions with the board fabricator.
Design the 1.425 V to 1.575 V core rail with the decoupling and sequencing specified in the ProASIC3 hardware guidance. Place bulk and local decoupling capacitors close to their associated supply pins, keep high-current return paths compact, and verify regulator startup behavior against the device's power-up requirements. The core range alone does not describe every I/O or configuration voltage, so each rail must be reconciled with the complete electrical tables.
Do not treat the -1, I, YI, G, or Q suffixes as cosmetic reel or packaging codes. They can indicate different ordering, speed, or temperature characteristics, and a package-compatible part may still be unsuitable if its timing or environmental grade differs. Before substitution, compare the complete ordering information, operating-temperature limits, timing tables, pin map, and qualification status. Also confirm that the programmed bitstream and configuration security requirements remain unchanged.
Reserve clean JTAG access for programming, debugging, and production test even if the final product normally operates from flash. Keep programming signals away from noisy or high-current switching paths, provide adequate ground references, and follow the manufacturer's recommendations for termination and configuration pins. A stable programming interface and power sequence reduce the risk of intermittent configuration failures during assembly and field service.
Thông tin tuân thủ
Compliance status was not stated for the exact A3P125-1TQ144 ordering code. Obtain the current manufacturer declarations and product-specific material reports before release.