A3P125-VQ100 - 125K-Gate 231MHz ProASIC3 FPGA | Microchip
部品番号: A3P125-VQ100 ✓ 生産中A3P125-VQ100 概要
A field-programmable gate array, or FPGA, is a semiconductor whose digital logic is configured after manufacture. A ProASIC3 FPGA belongs to the broader hierarchy of programmable logic devices, combining configurable logic, embedded RAM, programmable interconnect, and general-purpose I/O in one package. This makes the device suitable for consolidating separate glue logic, control logic, interface logic, and small embedded subsystems onto a single programmable board.
The A3P125-VQ100 provides 125,000 logic gates and 36,864 RAM bits in a compact 100-TQFP package. Its stated 231 MHz performance is useful for control systems, communications interfaces, instrumentation, embedded processors, and general-purpose logic consolidation where moderate clock performance and a small pin count are more important than the very high I/O counts available from larger FPGAs. The 14 x 14 mm package also supports dense surface-mount PCB layouts.
ProASIC3 devices use flash-based, nonvolatile configuration technology, allowing the programmed design to remain in the device without continuous configuration reload. This provides Instant On behavior and allows field upgrades without volatile RAM. The manufacturer describes the family as a reprogrammable, single-chip solution with a small footprint and low total cost of ownership, making it useful where production volumes are below the point where a custom ASIC is economical.
Typical applications include industrial automation and control, communications protocol handling, test and measurement equipment, embedded-system support logic, sensor conditioning, and general-purpose interface bridging. The 1.5 KLE device can also serve as a companion programmable controller when a system requires moderate logic density alongside a microcontroller or processor.
The principal design consideration is device utilization. Logic, RAM, dedicated pins, clock resources, and available I/O must be checked against the design before layout begins. Use the manufacturer pin-description table and package drawing to assign power, ground, configuration, clock, and user I/O connections, and verify the selected board-library footprint against the 100-TQFP mechanical drawing.
This product page combines the manufacturer family information with distributor technical summaries and practical comparison guidance. It organizes capacity, speed, package, temperature, replacement, and sourcing information so engineers can assess whether the A3P125-VQ100 fits a specific programmable-logic design before starting a board layout.
ドロップイン代替品: A3P125-VQ100 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: A3P125-VQ100 (同一形状・フットプリント) — 相違点: Configuration Technology, Device Type, Logic Elements, Operating Temperature, Package.
A3P125-VQ100I
✅ ドロップイン価格はお問い合わせください
データシートを見る →A3P125-VQ100T
✅ ドロップイン価格はお問い合わせください
データシートを見る →A3P125-VQG100
✅ ドロップイン📋 参考代替品(カタログ未掲載)
A3P125-1VQ100
✅ ドロップイン📋 参考代替品(カタログ未掲載)
A3P125-VQ100C
✅ ドロップイン📋 参考代替品(カタログ未掲載)
A3P125-VQ100 最大定格&電気的特性
| Device Type | ProASIC3 Field Programmable Gate Array (FPGA) |
| Logic Elements | 1.5K LEs |
| Number of Gates | 125,000 gates |
| Maximum Frequency | 231 MHz |
| Total RAM | 36,864 bits |
| Core Supply Voltage | 1.5 V |
| Process Technology | 130 nm CMOS |
| Configuration Technology | Flash-based nonvolatile configuration |
| パッケージ | 100-TQFP, 14 x 14 mm |
| 実装スタイル | Surface Mount |
| 動作温度 | 0 °C to 85 °C |
| Programmability | User-programmable flash configuration |
| Single-Chip Implementation | Supported |
| Logic and RAM Capacity | 125,000 gates and 36,864 RAM bits |
| Package Pin Count | 100 pins |
A3P125-VQ100 100 pins ピン配置ガイド
A3P125-VQ100 (100 pins パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: A3P125-VQ100.
詳細は データシート をご参照ください。
主な用途
A3P125-VQ100 の用途: 6 件s: Industrial Automation and Control, Communications Protocol Interface, Test and Measurement Instrumentation, Embedded System Support Logic, Sensor Conditioning and Data Acquisition, LED Lighting Control.
Industrial Automation and Control
The A3P125-VQ100 is suitable for consolidating deterministic control logic, interlocks, state-machine sequencing, and peripheral interfacing in industrial equipment operating from 0 °C to 85 °C. Its 1.5K logic elements and 36,864 RAM bits provide enough configurable resources for small control subsystems, while the 231 MHz maximum frequency supports timing-sensitive logic. Flash-based configuration retains the programmed configuration without a continuous volatile reload. During implementation, place the device between the processor or sensor subsystem and its field-bus or I/O circuitry, then verify logic utilization, timing, and available 100-TQFP I/O before committing the PCB layout.
おすすめ
Communications Protocol Interface
The A3P125-VQ100 can implement protocol framing, filtering, packet checks, command parsing, and interface isolation where a compact programmable-logic block is preferable to a larger FPGA. Its 125,000 gates and 36,864 RAM bits accommodate parallel datapaths and small buffering requirements, while the 231 MHz maximum frequency supports clocked interface logic. The nonvolatile flash configuration also permits field upgrades without losing the stored design after power removal. Confirm signal timing against the selected speed grade and keep communication transceivers outside the FPGA when their analog or high-speed requirements exceed the A3P125-VQ100's I/O capabilities.
おすすめ
Test and Measurement Instrumentation
The A3P125-VQ100 is useful for instrument control, acquisition sequencing, trigger logic, calibration tables, and programmable signal-path management. The device provides 1.5K logic elements and 36,864 RAM bits for control and data-handling functions, with a stated 231 MHz maximum operating frequency for clocked logic. Because ProASIC3 configuration is nonvolatile, instrument subsystems can start from a stored design after power restoration. Designers should reserve enough I/O for the instrument's external interfaces, review timing margins for the selected package and grade, and compare accuracy-critical analog functions against dedicated converter or amplifier components.
おすすめ
Embedded System Support Logic
The A3P125-VQ100 can serve as a programmable companion to a microcontroller or processor by implementing glue logic, boot coordination, peripheral bridges, timers, and status aggregation. Its compact 14 x 14 mm 100-TQFP package helps preserve board area, and the nonvolatile flash configuration supports a deterministic startup path. The 36,864 RAM bits can hold modest packet, trace, or scheduling structures, while the 231 MHz maximum frequency allows the support logic to operate concurrently with the host processor. Validate bus timing, interrupt polarity, and I/O standards because these requirements determine whether the available device resources are sufficient.
おすすめ
Sensor Conditioning and Data Acquisition
The A3P125-VQ100 is appropriate for digital sensor aggregation, sampling control, filtering, timestamp generation, and interface conversion in compact acquisition modules. Its 125,000 gates can implement parallel datapaths and control sequences, while 36,864 RAM bits support small buffers or calibration tables. The 231 MHz maximum frequency provides margin for synchronous acquisition logic without requiring a larger device. Keep precision analog conversion and sensor excitation outside the FPGA unless their specifications explicitly permit integration, and verify acquisition timing against the actual clock configuration and selected A3P125 ordering grade.
おすすめ
LED Lighting Control
The A3P125-VQ100 can implement multi-channel LED sequencing, dimming state machines, fault logging, and communication-assisted lighting control. Its programmable logic supports adaptable timing and behavior without changing a fixed mask set, while nonvolatile flash configuration allows the controller to restart in the programmed state after a power interruption. The 1.5K logic elements and 36,864 RAM bits are appropriate for moderate channel counts and control tables. Confirm LED drive current, switching frequency, and thermal requirements in the external driver circuitry, and ensure the FPGA supplies only control signals rather than carrying the LED power directly.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: A3P125-VQ100 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | A3P125-VQ100I | A3P125-VQ100T | A3P125-VQG100 | A3P125-1VQ100 | A3P125-VQ100C |
|---|---|---|---|---|---|---|
| Package | 100-TQFP (14 x 14 mm) | 100-TQFP (14 x 14 mm) | 100-TQFP (14 x 14 mm) | 100-TQFP (14 x 14 mm) | 100-TQFP (14 x 14 mm) | 100-TQFP (14 x 14 mm) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Device Type | ProASIC3 Field Programmable Gate Array | ProASIC3 Field Programmable Gate Array | ProASIC3 Field Programmable Gate Array | ProASIC3 Field Programmable Gate Array | ProASIC3 Field Programmable Gate Array | ProASIC3 Field Programmable Gate Array |
| Number of Gates | 125,000 gates | 125,000 gates | 125,000 gates | 125,000 gates | 125,000 gates | 125,000 gates |
| Total RAM | 36,864 bits | 36,864 bits | 36,864 bits | 36,864 bits | 36,864 bits | 36,864 bits |
| Core Supply Voltage | 1.5 V | 1.5 V | 1.5 V | 1.5 V | 1.5 V | 1.5 V |
| Process Technology | 130 nm CMOS | 130 nm CMOS | 130 nm CMOS | 130 nm CMOS | 130 nm CMOS | 130 nm CMOS |
| Configuration Technology | Flash-based nonvolatile configuration | Flash-based nonvolatile configuration | Flash-based nonvolatile configuration | Flash-based nonvolatile configuration | Flash-based nonvolatile configuration | Flash-based nonvolatile configuration |
主な差別化要因
- Compact nonvolatile programmable logic (vs A3P125-VQ100I)
- Single-chip reprogrammable implementation (vs A3P125-VQ100T)
- Moderate logic density with 231 MHz maximum frequency (vs A3P125-VQG100)
- Field-reprogrammable design retention (vs A3P125-1VQ100)
設計ノート
Assign power, ground, configuration, clock, and user I/O directly from the Microchip Technology ProASIC3 pin-description table. Cross-check every connection against the 100-TQFP 14 x 14 mm package drawing and your board library before routing. A pin assignment error in a dense programmable device can change the footprint's electrical role even when the physical lead location remains correct.
Use the core and I/O current tables in the family data sheet to size the 1.5 V supply under worst-case clocking and I/O activity. Place local bypass capacitors close to the package power pins and keep high-current return paths short. Estimated: total dissipation equals the sum of core power and I/O power, where core power is approximately 1.5 V multiplied by worst-case core current; validate the final result against the manufacturer's maximum ratings.
Do not treat an A3P125 suffix change as automatically production-equivalent. Confirm temperature grade, speed grade, qualification, and ordering format in the manufacturer's ordering information. A3P125-VQ100I is the industrial-temperature option, while the 1 and Q suffixes can indicate different ordering characteristics. Preserve the exact programmed device configuration and verify that the replacement supports the intended startup behavior.
Reserve configuration pins and clock inputs according to the family data sheet's reference design guidance, and account for every package lead even when it is unused in the current design. Route sensitive or high-fanout signals away from adjacent switching nodes, maintain a continuous ground reference, and place decoupling before branching into the FPGA supply network. This reduces return-path discontinuity and helps preserve predictable configuration and signal behavior.
コンプライアンス情報
Compliance status is not stated on the cited A3P125 product page and distributor summaries. Use the manufacturer's product documentation or declarations for the selected ordering code.