Microchip Technology

A3P125-VQ100 - 125K-Gate 231MHz ProASIC3 FPGA | Microchip

MPN: A3P125-VQ100 ✓ 啟用中
1.5 V Vdss 100-TQFP, 14 x 14 mm Package 231 MHz Speed
MOQ: 1 |

A3P125-VQ100 概覽

Microchip Technology A3P125-VQ100 is a ProASIC3 field-programmable gate array with 125,000 gates, 1.5K logic elements, 36,864 RAM bits, and a maximum operating frequency of 231 MHz. The device operates from a 1.5 V core supply and is packaged in a 100-lead TQFP measuring 14 x 14 mm. Its reprogrammable, nonvolatile architecture supports compact FPGA implementations without the mask set and long schedule associated with a custom ASIC.

A field-programmable gate array, or FPGA, is a semiconductor whose digital logic is configured after manufacture. A ProASIC3 FPGA belongs to the broader hierarchy of programmable logic devices, combining configurable logic, embedded RAM, programmable interconnect, and general-purpose I/O in one package. This makes the device suitable for consolidating separate glue logic, control logic, interface logic, and small embedded subsystems onto a single programmable board.

The A3P125-VQ100 provides 125,000 logic gates and 36,864 RAM bits in a compact 100-TQFP package. Its stated 231 MHz performance is useful for control systems, communications interfaces, instrumentation, embedded processors, and general-purpose logic consolidation where moderate clock performance and a small pin count are more important than the very high I/O counts available from larger FPGAs. The 14 x 14 mm package also supports dense surface-mount PCB layouts.

ProASIC3 devices use flash-based, nonvolatile configuration technology, allowing the programmed design to remain in the device without continuous configuration reload. This provides Instant On behavior and allows field upgrades without volatile RAM. The manufacturer describes the family as a reprogrammable, single-chip solution with a small footprint and low total cost of ownership, making it useful where production volumes are below the point where a custom ASIC is economical.

Typical applications include industrial automation and control, communications protocol handling, test and measurement equipment, embedded-system support logic, sensor conditioning, and general-purpose interface bridging. The 1.5 KLE device can also serve as a companion programmable controller when a system requires moderate logic density alongside a microcontroller or processor.

The principal design consideration is device utilization. Logic, RAM, dedicated pins, clock resources, and available I/O must be checked against the design before layout begins. Use the manufacturer pin-description table and package drawing to assign power, ground, configuration, clock, and user I/O connections, and verify the selected board-library footprint against the 100-TQFP mechanical drawing.

This product page combines the manufacturer family information with distributor technical summaries and practical comparison guidance. It organizes capacity, speed, package, temperature, replacement, and sourcing information so engineers can assess whether the A3P125-VQ100 fits a specific programmable-logic design before starting a board layout.

直接替換替代品,適用於 A3P125-VQ100 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此系列的變體

與下列產品可直接替換的同系列型號: A3P125-VQ100 (相同外形與佔位) — 差異在於 Configuration Technology, Device Type, Logic Elements, Operating Temperature, Package.

Microchip Technology
Configuration Technology: Flash-based
Device Type: ProASIC3 field-programmable gate array
Logic Elements: 1.5K logic elements
比較對象 A3P125-VQ100 →
Microchip Technology
Operating Temperature: -40°C to 125°C (TJ)
比較對象 A3P125-VQ100 →

A3P125-VQ100I

✅ 直接替換
Microchip Technology
📦 100-TQFP (14 x 14 mm)
ProASIC3 field-programmable gate array · 1.5K logic elements · 71 I/O · 36,864 bits · FPGA · ProASIC3 · Flash-based · 100-pin TQFP

聯絡詢價

查看資料表 →

A3P125-VQ100T

✅ 直接替換
Microchip Technology
📦 100-TQFP (14 x 14 mm)
125000 · 3072 · 36864 · 71 · 100-VQFP (14x14 mm) · 1.425V to 1.575V · -40°C to 125°C (TJ) · CMOS

聯絡詢價

查看資料表 →

A3P125-VQG100

✅ 直接替換
📦 100-TQFP (14 x 14 mm)
Alternative 100-TQFP ordering suffix with 100% aligned gate count and RAM capacity; suffix-specific grade must be confirmed

📋 參考替代品(不在目錄中)

A3P125-1VQ100

✅ 直接替換
📦 100-TQFP (14 x 14 mm)
Speed-grade ordering variant with 100% aligned A3P125 logic, RAM, and 100-TQFP footprint

📋 參考替代品(不在目錄中)

A3P125-VQ100C

✅ 直接替換
📦 100-TQFP (14 x 14 mm)
Commercial-temperature ordering suffix with 100% aligned A3P125 core resources and package footprint

📋 參考替代品(不在目錄中)

A3P125-VQ100 最大額定值與電氣特性

Device Type ProASIC3 Field Programmable Gate Array (FPGA)
Logic Elements 1.5K LEs
Number of Gates 125,000 gates
Maximum Frequency 231 MHz
Total RAM 36,864 bits
Core Supply Voltage 1.5 V
Process Technology 130 nm CMOS
Configuration Technology Flash-based nonvolatile configuration
封裝 100-TQFP, 14 x 14 mm
安裝方式 Surface Mount
工作溫度 0 °C to 85 °C
Programmability User-programmable flash configuration
Single-Chip Implementation Supported
Logic and RAM Capacity 125,000 gates and 36,864 RAM bits
Package Pin Count 100 pins

A3P125-VQ100 100 pins 腳位配置指南

A3P125-VQ100(100 pins 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。

A3P125-VQ100 的 100 pins 封裝腳位圖

無詳細腳位定義資料: A3P125-VQ100.

請參閱 資料表 以查看完整腳位配置。

典型應用

A3P125-VQ100 適用於 6 應用s: Industrial Automation and Control, Communications Protocol Interface, Test and Measurement Instrumentation, Embedded System Support Logic, Sensor Conditioning and Data Acquisition, LED Lighting Control.

🏭

Industrial Automation and Control

The A3P125-VQ100 is suitable for consolidating deterministic control logic, interlocks, state-machine sequencing, and peripheral interfacing in industrial equipment operating from 0 °C to 85 °C. Its 1.5K logic elements and 36,864 RAM bits provide enough configurable resources for small control subsystems, while the 231 MHz maximum frequency supports timing-sensitive logic. Flash-based configuration retains the programmed configuration without a continuous volatile reload. During implementation, place the device between the processor or sensor subsystem and its field-bus or I/O circuitry, then verify logic utilization, timing, and available 100-TQFP I/O before committing the PCB layout.

🌐

Communications Protocol Interface

The A3P125-VQ100 can implement protocol framing, filtering, packet checks, command parsing, and interface isolation where a compact programmable-logic block is preferable to a larger FPGA. Its 125,000 gates and 36,864 RAM bits accommodate parallel datapaths and small buffering requirements, while the 231 MHz maximum frequency supports clocked interface logic. The nonvolatile flash configuration also permits field upgrades without losing the stored design after power removal. Confirm signal timing against the selected speed grade and keep communication transceivers outside the FPGA when their analog or high-speed requirements exceed the A3P125-VQ100's I/O capabilities.

🖥️

Test and Measurement Instrumentation

The A3P125-VQ100 is useful for instrument control, acquisition sequencing, trigger logic, calibration tables, and programmable signal-path management. The device provides 1.5K logic elements and 36,864 RAM bits for control and data-handling functions, with a stated 231 MHz maximum operating frequency for clocked logic. Because ProASIC3 configuration is nonvolatile, instrument subsystems can start from a stored design after power restoration. Designers should reserve enough I/O for the instrument's external interfaces, review timing margins for the selected package and grade, and compare accuracy-critical analog functions against dedicated converter or amplifier components.

🔧

Embedded System Support Logic

The A3P125-VQ100 can serve as a programmable companion to a microcontroller or processor by implementing glue logic, boot coordination, peripheral bridges, timers, and status aggregation. Its compact 14 x 14 mm 100-TQFP package helps preserve board area, and the nonvolatile flash configuration supports a deterministic startup path. The 36,864 RAM bits can hold modest packet, trace, or scheduling structures, while the 231 MHz maximum frequency allows the support logic to operate concurrently with the host processor. Validate bus timing, interrupt polarity, and I/O standards because these requirements determine whether the available device resources are sufficient.

📱

Sensor Conditioning and Data Acquisition

The A3P125-VQ100 is appropriate for digital sensor aggregation, sampling control, filtering, timestamp generation, and interface conversion in compact acquisition modules. Its 125,000 gates can implement parallel datapaths and control sequences, while 36,864 RAM bits support small buffers or calibration tables. The 231 MHz maximum frequency provides margin for synchronous acquisition logic without requiring a larger device. Keep precision analog conversion and sensor excitation outside the FPGA unless their specifications explicitly permit integration, and verify acquisition timing against the actual clock configuration and selected A3P125 ordering grade.

💡

LED Lighting Control

The A3P125-VQ100 can implement multi-channel LED sequencing, dimming state machines, fault logging, and communication-assisted lighting control. Its programmable logic supports adaptable timing and behavior without changing a fixed mask set, while nonvolatile flash configuration allows the controller to restart in the programmed state after a power interruption. The 1.5K logic elements and 36,864 RAM bits are appropriate for moderate channel counts and control tables. Confirm LED drive current, switching frequency, and thermal requirements in the external driver circuitry, and ensure the FPGA supplies only control signals rather than carrying the LED power directly.

What are the key specifications of A3P125-VQ100 that engineers should know?
The A3P125-VQ100 is a 1.5K-logic-element ProASIC3 FPGA with 125,000 gates, 36,864 RAM bits, and a maximum frequency of 231 MHz. It uses a 1.5 V core supply, 130 nm CMOS technology, and a 100-TQFP package measuring 14 x 14 mm. According to the Microchip Technology A3P125 product page, the ProASIC3 family provides a reprogrammable, single-chip solution with a small package footprint and low total cost of ownership.
What is the A3P125-VQ100 pinout and package footprint?
The A3P125-VQ100 uses a 100-lead TQFP package measuring 14 x 14 mm and is intended for surface-mount assembly. Use the pin-description table in the Microchip Technology A3P125 family datasheet to identify power, ground, configuration, clock, and user I/O pins, and cross-check the land pattern against the manufacturer package drawing. The commercial package designation shown for this ordering code is 100-TQFP, also described in listings as 100-VQFP.
Where can I download the A3P125-VQ100 datasheet PDF?
The official technical documents for the A3P125-VQ100 are reached from the Microchip Technology A3P125 product page at https://www.microchip.com/en-us/product/A3P125. Select the ProASIC3 Flash Family FPGAs data sheet from the product documentation. The document covers family architecture, configuration, electrical characteristics, package options, pin descriptions, and ordering information needed to evaluate a design.
What is a3p125 vqg100?
A3P125-VQG100 is an ordering variant of the Microchip A3P125 ProASIC3 FPGA and is listed as a 100-TQFP device with 125,000 gates and 36,864 RAM bits. Its exact temperature and speed suffix should be checked against the manufacturer's ordering information before substitution. For a new design, treat A3P125-VQG100 as a family alternative rather than assuming every electrical and qualification characteristic matches A3P125-VQ100.
What can replace A3P125-VQ100?
The closest documented replacements are A3P125 family ordering variants in the same 100-TQFP footprint, including A3P125-VQ100I, A3P125-VQ100T, A3P125-VQG100, and A3P125-1VQ100. Their suffix determines factors such as temperature grade, qualification, speed grade, or packaging. A valid replacement must match the PCB footprint and every electrical constraint, including supply voltage, timing, operating temperature, configuration method, and I/O assignment.
Is A3P125-VQ100 the same as A3P125-VQ100I?
The A3P125-VQ100I is the industrial-temperature ordering variant of the same A3P125 ProASIC3 device and uses the same 100-TQFP footprint. The principal distinction is the commercial versus industrial temperature grade, which changes the acceptable ambient-temperature range. Because the package and core architecture remain aligned, it can serve as a board-compatible alternative when its temperature grade, qualification status, and ordering details satisfy the system requirements.
A3P125-VQ100 vs A3P125-VQ100I — which is better for industrial use?
The A3P125-VQ100I is generally the better choice for industrial equipment requiring operation below the A3P125-VQ100's 0 °C lower temperature limit, because the I suffix denotes the industrial-temperature grade. Both devices use the same 100-TQFP package and 125,000-gate ProASIC3 architecture. Confirm the complete electrical ratings and qualification requirements in the family data sheet before placing the alternative into production.
When should I choose A3P125-VQ100 over A3P125-VQ100T?
Choose A3P125-VQ100 when its commercial temperature range and specified packaging meet the product requirements, and choose A3P125-VQ100T when that ordering suffix provides the required delivery format or grade. The two codes share the ProASIC3 A3P125 device family and 100-TQFP outline, so software and board compatibility are likely strong. Final substitution still requires comparison of the manufacturer ordering table and moisture-shipping requirements.
Is A3P125-VQ100 suitable for an industrial control system?
The A3P125-VQ100 can suit industrial control applications that remain within its specified 0 °C to 85 °C operating range and do not require an industrial qualification. Its 1.5K logic elements, 36,864 RAM bits, 231 MHz maximum frequency, and nonvolatile flash configuration support deterministic control logic and field reconfiguration. Equipment expected to operate below 0 °C should instead consider the industrial A3P125-VQ100I ordering variant.
What is the best Microchip equivalent for A3P125-VQ100?
A3P125-VQ100I is the most direct Microchip alternative because it retains the same A3P125 ProASIC3 architecture and 100-TQFP footprint while providing an industrial-temperature ordering option. A3P125-VQG100 and A3P125-1VQ100 are also documented family alternatives, but their suffix-specific characteristics must be checked against the required speed grade, temperature range, qualification, and assembly process. No cross-manufacturer equivalent is presented as a drop-in replacement.
How much power does the A3P125-VQ100 consume?
The A3P125-VQ100 operates from a 1.5 V core supply, but total power depends on configuration, switching activity, I/O loading, and the selected package variant. Use the core and I/O current tables in the Microchip Technology ProASIC3 Flash Family FPGAs data sheet for worst-case estimates. The critical board-design step is to size supply and decoupling for the actual clock rate, utilized I/O, and environmental operating condition rather than relying on a single nominal power value.
Where can I buy A3P125-VQ100 and check current lead time?
Use the Request a Quote form on this page to request A3P125-VQ100 availability, current lead time, and an order quotation for the exact 100-TQFP ordering code. Confirm the package suffix, quantity, and delivery requirements before submitting the request. Because availability and lead time can change, obtaining a current quotation is the appropriate way to plan production procurement.
What is the price of A3P125-VQ100?
A current quotation for A3P125-VQ100 is available through the Request a Quote form on this page. Include the required quantity, tray or production packing preference, destination, and target delivery date so the response reflects the exact ordering code and procurement terms. Pricing for programmable-logic devices can vary with volume, packaging, and market conditions, so a live quotation is more useful than a static price reference.
Is A3P125-VQ100 in stock?
Current A3P125-VQ100 stock should be confirmed through the Request a Quote form on this page before production planning. Provide your required quantity, packaging preference, and target delivery date. Because the request is handled as a live quotation, it can reflect current supply and the exact A3P125-VQ100 ordering code instead of a potentially outdated inventory indication.
What is the lead time for A3P125-VQ100?
The lead time for A3P125-VQ100 depends on current factory availability, order quantity, and requested production packaging. Submit the required quantity and delivery schedule through the Request a Quote form on this page to obtain a current commitment. Include any required trace documents or delivery milestones in the request so the quotation reflects the complete procurement requirement.

工程參考資料,適用於 A3P125-VQ100 — 比較、設計指引及合規資訊。

選型指南

Choose the A3P125-VQ100 when a design needs a compact, nonvolatile ProASIC3 device with 125,000 gates, 36,864 RAM bits, a stated 231 MHz maximum frequency, and a 100-TQFP footprint suitable for 0 °C to 85 °C operation. Select A3P125-VQ100I when the same electrical resource profile and footprint must support industrial-temperature requirements. Consider A3P125-VQ100T when its ordering and packaging details match the production plan, and evaluate A3P125-VQG100 or A3P125-1VQ100 only after confirming the suffix-specific temperature, speed, qualification, and configuration details. A3P125-VQ100C is appropriate when the commercial-temperature ordering suffix matches the deployment. For designs exceeding the A3P125's logic, RAM, I/O, or timing requirements, move to a larger ProASIC3 device rather than forcing a marginal fit. Verify every proposed substitute against the manufacturer ordering table and pin-description document before releasing PCB artwork.

與替代品比較

參數 本產品 A3P125-VQ100I A3P125-VQ100T A3P125-VQG100 A3P125-1VQ100 A3P125-VQ100C
Package 100-TQFP (14 x 14 mm) 100-TQFP (14 x 14 mm) 100-TQFP (14 x 14 mm) 100-TQFP (14 x 14 mm) 100-TQFP (14 x 14 mm) 100-TQFP (14 x 14 mm)
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Device Type ProASIC3 Field Programmable Gate Array ProASIC3 Field Programmable Gate Array ProASIC3 Field Programmable Gate Array ProASIC3 Field Programmable Gate Array ProASIC3 Field Programmable Gate Array ProASIC3 Field Programmable Gate Array
Number of Gates 125,000 gates 125,000 gates 125,000 gates 125,000 gates 125,000 gates 125,000 gates
Total RAM 36,864 bits 36,864 bits 36,864 bits 36,864 bits 36,864 bits 36,864 bits
Core Supply Voltage 1.5 V 1.5 V 1.5 V 1.5 V 1.5 V 1.5 V
Process Technology 130 nm CMOS 130 nm CMOS 130 nm CMOS 130 nm CMOS 130 nm CMOS 130 nm CMOS
Configuration Technology Flash-based nonvolatile configuration Flash-based nonvolatile configuration Flash-based nonvolatile configuration Flash-based nonvolatile configuration Flash-based nonvolatile configuration Flash-based nonvolatile configuration

主要差異化特點

  • Compact nonvolatile programmable logic (對比A3P125-VQ100I)
  • Single-chip reprogrammable implementation (對比A3P125-VQ100T)
  • Moderate logic density with 231 MHz maximum frequency (對比A3P125-VQG100)
  • Field-reprogrammable design retention (對比A3P125-1VQ100)

設計說明

Assign power, ground, configuration, clock, and user I/O directly from the Microchip Technology ProASIC3 pin-description table. Cross-check every connection against the 100-TQFP 14 x 14 mm package drawing and your board library before routing. A pin assignment error in a dense programmable device can change the footprint's electrical role even when the physical lead location remains correct.

Use the core and I/O current tables in the family data sheet to size the 1.5 V supply under worst-case clocking and I/O activity. Place local bypass capacitors close to the package power pins and keep high-current return paths short. Estimated: total dissipation equals the sum of core power and I/O power, where core power is approximately 1.5 V multiplied by worst-case core current; validate the final result against the manufacturer's maximum ratings.

Do not treat an A3P125 suffix change as automatically production-equivalent. Confirm temperature grade, speed grade, qualification, and ordering format in the manufacturer's ordering information. A3P125-VQ100I is the industrial-temperature option, while the 1 and Q suffixes can indicate different ordering characteristics. Preserve the exact programmed device configuration and verify that the replacement supports the intended startup behavior.

Reserve configuration pins and clock inputs according to the family data sheet's reference design guidance, and account for every package lead even when it is unused in the current design. Route sensitive or high-fanout signals away from adjacent switching nodes, maintain a continuous ground reference, and place decoupling before branching into the FPGA supply network. This reduces return-path discontinuity and helps preserve predictable configuration and signal behavior.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

Compliance status is not stated on the cited A3P125 product page and distributor summaries. Use the manufacturer's product documentation or declarations for the selected ordering code.

資料驗證日期: 2026-11-10 — 資料由 XAIPART 元件工程團隊驗證及整理

相關搜尋

a3p125 vqg100i a3p125 pqg208i a3p125 tqg144 a3p125 vqg100 a3p125 fgg144 actel a3p125 A3P125-VQ100 datasheet A3P125-VQ100 pinout A3P125-VQ100 equivalent A3P125-VQ100 replacement A3P125-VQ100 vs A3P125-VQ100I A3P125-VQ100 100-TQFP footprint A3P125-VQ100 price A3P125-VQ100 stock Microchip Technology A3P125-VQ100

相關元件與詞彙

Microchip Technology A3P125-VQ100 A3P125-VQ100I A3P125-VQ100T A3P125-VQG100 A3P125-1VQ100 A3P125-VQ100C ProASIC3 FPGA field-programmable gate array programmable logic device nonvolatile flash configuration 130 nm CMOS 125,000 gates 1.5K logic elements 36,864 RAM bits 231 MHz 1.5 V core supply 100-TQFP 14 x 14 mm package surface mount industrial automation communications interface test and measurement embedded system support logic
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情