A54SX16P-TQG144I - 16K Gates SX FPGA 144-TQFP | Microsemi
部品番号: A54SX16P-TQG144I ✗ 生産終了| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $38.5 | $38.50 |
| 10 | $34.65 | $346.50 |
| 100 | $30.8 | $3,080.00 |
| 500 | $27.72 | $13,860.00 |
| 1,000 | $24.64 | $24,640.00 |
A54SX16P-TQG144I 概要
An FPGA (field programmable gate array) is a semiconductor device containing a fabric of configurable logic blocks (CLBs) and programmable interconnects that the designer configures after manufacturing, sitting within the broader hierarchy of programmable logic alongside CPLDs, structured ASICs, and ASSPs. The SX family uses a sea-of-modules architecture that simplifies design, reduces cost and power, and shortens time to market for performance-intensive applications.
Key features of the A54SX16P include dual-rail operation (core supply 3V to 3.6V and 4.75V to 5.25V per distributor data), industrial temperature range of -40C to +85C (the I suffix), and 113 user-programmable I/O. The 0.35 um antifuse-style process family delivers deterministic routing with low jitter, well suited to glue logic replacement, bus interfacing, and control-plane functions. The PQ (performance) speed variant targets the 240 MHz class of the SX family per Jotrin listing data.
The SX architecture organizes logic into logic array blocks (LABs/CLBs), with Microchip USA reporting 1452 logic modules for this density class and 113 user I/O in the 144-TQFP. Programming is one-time, giving design security advantages over SRAM FPGAs - the bitstream cannot be read back - which historically made SX devices popular in military, aerospace, and industrial designs where IP protection matters.
Typical applications include legacy industrial control systems, telecommunications line-card glue logic, embedded bus bridging, and aerospace/defense sub-systems where the design is already qualified and an exact-form-fit-function replacement is required. The industrial -40C to +85C rating supports harsh-environment deployments.
Design consideration: because SX devices are one-time programmable, reserve spare logic margin (target under 80% utilization) and validate timing at corner temperature before programming; the commercial (no-I) A54SX16P-TQG144 cannot substitute in an industrial -40C to +85C application.
This page synthesizes distributor listings, verified specifications, drop-in same-package alternatives, and practical design guidance not found in the manufacturer datasheet, helping engineers source and qualify this mature Microsemi/Microchip FPGA.
ドロップイン代替品: A54SX16P-TQG144I — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: A54SX16P-TQG144I （同一形状・フットプリント） — 相違点: Family, Operating Temperature, Package, Speed Grade, System Gates.
クイック比較ツール — 並列比較する代替部品を選択:
A54SX16P-1TQG144I
✅ ドロップイン✓ 在庫あり
$47.9 / 個
データシートを見る →A54SX16P-2TQG144I
✅ ドロップイン✓ 在庫あり
$26.1 / 個
データシートを見る →A54SX16P-TQG144
✅ ドロップイン✓ 在庫あり
$31 / 個
データシートを見る →A54SX16P-1TQG144
✅ ドロップイン✓ 在庫あり
価格はお問い合わせください
データシートを見る →A54SX16P-2TQG144
✅ ドロップイン✓ 在庫あり
$48.9 / 個
データシートを見る →A54SX16A-TQG144I
✅ ドロップイン📋 参考代替品（カタログ未掲載）
A54SX16P-TQG144I 最大定格＆電気的特性
| Manufacturer | Microsemi Corporation (Microchip Technology) |
| Family | SX (SX FPGA Family) |
| Number of Gates | 16000 gates |
| Number of Logic Cells | 924 cells |
| User I/O | 113 |
| Maximum System Frequency | 240 MHz |
| Process Technology | 0.35 um CMOS |
| Supply Voltage (Core) | 3 V to 3.6 V |
| Supply Voltage (I/O) | 4.75 V to 5.25 V |
| I/O Voltage Support | 3.3 V / 5 V |
| パッケージ | 144-TQFP (20x20 mm) |
| 実装タイプ | Surface Mount |
| 動作温度 | -40C to +85C |
| Temperature Grade | Industrial (I suffix) |
| Speed Grade | Standard (P performance variant) |
| Packaging | Tray |
| Programming Technology | One-time programmable (antifuse-family SX architecture) |
A54SX16P-TQG144I 144-tqfp (20x20 mm) ピン配置ガイド
A54SX16P-TQG144I (144-tqfp (20x20 mm) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: A54SX16P-TQG144I.
詳細は データシート をご参照ください。
主な用途
A54SX16P-TQG144I の用途: 6 件s: Legacy Industrial Control Systems, Telecommunications Line-Card Glue Logic, Aerospace and Defense Subsystems, Embedded Bus Bridging and Interface Conversion, Test and Measurement Instrument Repair, Security and Surveillance Controller Boards.
Legacy Industrial Control Systems
The A54SX16P-TQG144I fits industrial control and factory automation platforms that standardized on SX FPGAs decades ago and require exact form-fit-function replacement. Its -40C to +85C industrial rating and 113 dual-standard 3.3V/5V I/O allow direct interfacing with legacy PLC backplanes and 5V TTL sensors without level shifters. The one-time-programmable configuration cannot be corrupted by brownouts or EMI events common on factory floors, improving field reliability versus SRAM FPGAs. Placed as the main sequencer or bus controller, it sustains the original 240 MHz-class timing with zero PCB changes, protecting the substantial requalification cost of replacing an embedded controller board.
おすすめ
Telecommunications Line-Card Glue Logic
Telecom line cards historically used SX FPGAs to bridge proprietary ASIC interfaces to backplane buses. The A54SX16P-TQG144I's 924 logic cells and 113 I/O provide exactly the glue capacity needed for address decoding, bus multiplexing, and interrupt aggregation at line-card speeds well within the 240 MHz family limit. Its 3.3V core and 5V-tolerant I/O ring match legacy -48V-powered card architectures that still run 5V TTL signaling. Because the device is one-time programmable, configuration is instantly available at power-up with no external configuration flash, reducing BOM count and boot latency on hot-swappable cards. Drop-in speed-grade variants preserve the original footprint during spares provisioning.
おすすめ
Aerospace and Defense Subsystems
Defense and avionics programs that qualified SX FPGAs during original design-in continue to specify the A54SX16P-TQG144I because its antifuse-style one-time-programmable configuration is inherently resistant to configuration upset and cannot be read back - a design-security requirement in military platforms. The industrial -40C to +85C range covers many avionics bay environments, and the 144-TQFP surface-mount package survives vibration-qualified assembly processes. The device serves as state machines, Mil-STD bus interface logic, and redundancy voting logic. Because redesign of qualified hardware requires costly re-certification, sourcing original SX silicon through excess inventory is preferred over migration to modern FPGA families.
おすすめ
Embedded Bus Bridging and Interface Conversion
The A54SX16P-TQG144I is well suited to bridging legacy buses such as VME, ISA-style local buses, or parallel peripheral interfaces to modern controllers. Its dual 3V-3.6V core and 4.75V-5.25V I/O supplies let one device span 5V TTL host sides and 3.3V peripheral sides without external translation. With 113 bidirectional I/O, a single TQFP-144 replaces dozens of 74-series buffers, latches, and PALs, cutting board area and assembly cost. Deterministic one-time-programmed routing gives fixed pin-to-pin propagation delays, simplifying setup/hold analysis on asynchronous bus transactions. Speed-grade variants (A54SX16P-1/2TQG144I) cover designs needing extra timing margin at the same footprint.
おすすめ
Test and Measurement Instrument Repair
Bench instruments, ATE fixtures, and custom test racks built in the 1990s and 2000s frequently embed SX FPGAs for timing generation and pattern sequencing. The A54SX16P-TQG144I enables board-level repair of these assets with original silicon, preserving the factory-programmed bitstream and calibration-correlated timing. The 240 MHz-class family performance and 113 I/O reproduce original stimulus/timing accuracy, while one-time programming guarantees the replacement behaves identically on power-up with zero configuration latency - important in sequencer roles where a missed cycle corrupts a test. Sourcing the industrial I-suffix extends reliable operation in non-conditioned lab environments with wide ambient swings.
おすすめ
Security and Surveillance Controller Boards
Older security and video surveillance controller designs used SX FPGAs for camera synchronization, parallel video framing, and alarm logic. The A54SX16P-TQG144I's 16K gates and 924 cells accommodate frame counters, sync generators, and alarm state machines, while the 5V-tolerant I/O ring directly drives legacy CCD camera timing buses and relay drive buffers. One-time programming ensures the security logic cannot be reconfigured by an attacker through any configuration interface - a meaningful hardening property versus SRAM FPGAs whose bitstreams can be intercepted at boot. The industrial temperature rating supports outdoor enclosures from -40C to +85C without convection heating, preserving original mechanical designs.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: A54SX16P-TQG144I — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | A54SX16P-1TQG144I | A54SX16P-TQG144 | A54SX16A-TQG144I |
|---|---|---|---|---|
| Package | 144-TQFP (20x20 mm) | 144-TQFP (20x20 mm) - same | 144-TQFP (20x20 mm) - same | 144-TQFP (20x20 mm) - same |
| Brand | Microsemi | Microsemi | Microsemi | Microchip Technology |
| Gate Density | 16000 gates | 16000 gates | 16000 gates | 16000 gates (SX-A) |
| User I/O | 113 | 113 | 113 | 113 |
| Speed Grade | Standard | -1 (faster) | Standard | Standard (SX-A, faster process) |
| Operating Temperature | -40C to +85C | -40C to +85C | 0C to +70C (commercial) | -40C to +85C |
| Process Technology | 0.35 um | 0.35 um | 0.35 um | SX-A finer process |
| Bitstream Compatibility | Reference | Yes (same family, re-run timing) | Yes (identical die) | No - requires re-compile |
主な差別化要因
- Faster speed grade available as pin-identical upgrade （vs A54SX16P-1TQG144I)
- Industrial temperature rating （vs A54SX16P-TQG144)
- Original-family design security and power-up immediacy （vs A54SX16A-TQG144I)
- Dual 3.3V/5V I/O capability in a single device （vs Modern low-voltage FPGAs (e.g., A3PE600-2FGG484))
設計ノート
The A54SX16P-TQG144I requires two independent rails: 3V to 3.6V core and 4.75V to 5.25V I/O. Power both rails from regulated LDOs or buck converters with at least 0.1 uF ceramic decoupling per power/ground pin pair plus bulk capacitance (10 uF to 22 uF) near the package. Observe power-up: bring rails up monotonically; SX devices tolerate either rail first, but slow, non-monotonic ramps on the 3.3V rail can cause excessive inrush through the I/O ESD structures. Verify total core current against the SX family datasheet current tables for your utilization level.
SX devices are one-time programmable: a programming error or a design at greater than roughly 80% routing utilization cannot be reworked on the same physical part. Before programming, complete static timing analysis at -40C and +85C corners in the Microchip/Libero toolchain, and reserve spare modules for ECO fixes. Do not substitute the commercial A54SX16P-TQG144 (0C to +70C) into an industrial -40C to +85C socket even though it is pin-identical - timing derates outside the commercial range are not guaranteed by the datasheet.
With a 5V I/O ring, output edge rates on heavily loaded buses can produce reflections on long traces; keep 5V I/O trace lengths short and consider series termination (22 to 33 ohm) on clock and strobe outputs. Group 5V-tolerant and 3.3V I/O assignments into their respective banks per the SX pinout tables, and return each bank's ground through adjacent GND pins. Avoid sharing the programming pins with switching signals, since fixture access to programming pads is needed during production programming of this OTP device.
Estimated: thermal performance of the 144-TQFP (20x20 mm) depends on airflow and board copper, per the SX-A family datasheet thermal section. As a design estimate, at moderate core utilization the junction rise above ambient is typically tens of degrees C on a 4-layer board with ground pour; confirm against the datasheet theta_JA tables for your airflow condition and keep Tj within the absolute maximum rating at +85C ambient. Avoid fully-populated, thermally-constrained sealed enclosures without airflow verification.
コンプライアンス情報
This is a mature Microsemi SX-family FPGA; RoHS/REACH status for the exact ordering code was not present in the verified web data and must be confirmed with the supplier. AEC-Q100 is not applicable as this is a commercial/industrial FPGA, not an automotive-qualified part.
