A54SX32-2BG329 - 32K-Gate SX FPGA, 320MHz, BGA-329 | Microchip
部品番号: A54SX32-2BG329 ✗ 生産終了| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $62.5 | $62.50 |
| 10 | $58.2 | $582.00 |
| 100 | $53.75 | $5,375.00 |
| 500 | $49.9 | $24,950.00 |
| 1,000 | $46.3 | $46,300.00 |
A54SX32-2BG329 概要
An FPGA (Field-Programmable Gate Array) is a semiconductor device containing a fabric of configurable logic blocks and programmable interconnects that the designer wires together after manufacturing, sitting within the broader hierarchy of programmable logic devices: SPLDs, CPLDs, and FPGAs, all under the umbrella of programmable system-on-chip and digital logic ICs. The SX family uses a sea-of-modules architecture, which simplifies design timing closure, reduces design cost and power consumption, and shortens time to market for performance-intensive applications.
Key features of the A54SX32-2BG329 include the speed-grade -2 rating (the fastest commercial grade of the SX32 family), the high-density 329-ball BGA package suited to fine-pitch surface-mount assembly, and 249 I/Os for wide data-path designs. The CMOS process yields low static power, and the sea-of-modules routing architecture provides predictable, register-to-register delays that support synchronous designs above 100 MHz in practical use.
Technically, the SX family achieves its performance through a module-based fabric rather than lookup-table (LUT) based architectures, with each module implementing combinational and sequential functions directly. This delivers higher gates-per-micron efficiency and faster inter-module routing than contemporaneous SRAM FPGAs, while the antifuse-style programming keeps configuration nonvolatile.
Typical applications include telecommunications line cards, industrial control and data-acquisition systems, test and measurement instrumentation glue logic, and military/aerospace subsystem logic replacement, where high gate utilization and deterministic timing matter.
Designers should verify the supply sequencing and 5V-tolerant I/O interfacing requirements early, and confirm the -2 speed grade is required; slower -1 grade parts in the same BG329 footprint can reduce cost.
This page synthesizes distributor pricing, drop-in same-footprint alternatives, and practical design notes not found in the manufacturer datasheet.
ドロップイン代替品: A54SX32-2BG329 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: A54SX32-2BG329 （同一形状・フットプリント） — 相違点: Package, Family, System Gates, Supply Voltage, Programming Technology.
クイック比較ツール — 並列比較する代替部品を選択:
A54SX32-2BGG329I
✅ ドロップイン✓ 在庫あり
$88.9 / 個
データシートを見る →A54SX32-2BGG329
✅ ドロップイン✓ 在庫あり
価格はお問い合わせください
データシートを見る →A54SX32-1BGG329I
✅ ドロップイン✓ 在庫あり
$47.8 / 個
データシートを見る →A54SX32-1BGG329
✅ ドロップイン✓ 在庫あり
$544.99 / 個
データシートを見る →A54SX32-BG329I
✅ ドロップイン✓ 在庫あり
$560 / 個
データシートを見る →A54SX32-BGG329I
✅ ドロップイン✓ 在庫あり
価格はお問い合わせください
データシートを見る →A54SX32A-2BG329
✅ ドロップイン📋 参考代替品（カタログ未掲載）
A54SX32-2BG329 最大定格＆電気的特性
| Family | SX (Actel/Microsemi) |
| System Gates | 32,000 gates |
| CLBs | 2880 |
| Logic Cells (Modules) | 1800 |
| Maximum Toggle Frequency | 320 MHz |
| Speed Grade | -2 |
| Process Technology | 0.35 um CMOS |
| 電源電圧 | 3.3 V nominal (3.0 V to 3.6 V) |
| I/O Voltage Compatibility | 3.3 V / 5 V tolerant |
| User I/Os | 249 |
| パッケージ | 329-ball BGA (BG329) |
| 実装タイプ | Surface Mount |
| Architecture | Sea-of-modules |
| Programming Technology | Nonvolatile (Actel SX programming) |
A54SX32-2BG329 329-ball bga (bg329) ピン配置ガイド
A54SX32-2BG329 (329-ball bga (bg329) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: A54SX32-2BG329.
詳細は データシート をご参照ください。
主な用途
A54SX32-2BG329 の用途: 6 件s: Telecommunications Line Cards, Industrial Control and Data Acquisition, Test and Measurement Instrumentation, Aerospace and Defense Logic Replacement, Legacy Board Sustainment and Obsolescence Management, Protocol Bridging and Interface Conversion.
Telecommunications Line Cards
The A54SX32-2BG329 fits telecommunications line-card logic because its 320 MHz toggle capability and sea-of-modules fabric handle framing, multiplexing, and backplane glue logic with deterministic delays. With 249 user I/Os in a 329-ball BGA, wide parallel buses to PHY and framer devices are supported without pin starvation. The device operates from a standard 3.3V card supply (3.0V to 3.6V) with 5V-tolerant I/O for legacy backplane signaling. Place 0.1 uF ceramic decoupling at each supply ball pair; the nonvolatile configuration removes the boot PROM required by SRAM FPGAs, simplifying card power-up sequencing and reducing BOM count in telecom racks.
おすすめ
Industrial Control and Data Acquisition
In industrial controllers and DAQ systems, the A54SX32-2BG329 implements state machines, address decoders, and parallel interface bridging for sensors and actuators. Its 32K gates and 2880 CLBs provide sufficient capacity for moderate control logic, while the 0.35 um CMOS process keeps static power low in sealed enclosures with limited airflow. The industrial-temperature sibling A54SX32-2BGG329I drops into the identical footprint when -40C to +85C operation is required. The nonvolatile SX configuration ensures the controller is instantly active at power-on without configuration hardware, improving fault-recovery behavior in factory automation lines subject to frequent power cycling.
おすすめ
Test and Measurement Instrumentation
Bench and automated test instruments use the A54SX32-2BG329 for timing generators, trigger logic, and bus interfaces (GPIB-class parallel timing, counter/timer functions). The -2 speed grade's 320 MHz toggle rate and predictable inter-module delays allow precise edge placement in stimulus generation, and the 249 I/Os support multi-channel test heads. Because SX fabric timing is deterministic, calibration routines can rely on stable propagation characteristics across units. The 3.3V supply with 5V-tolerant inputs eases integration with legacy instrument circuitry still running at 5V logic levels, avoiding level-shifters on mixed-voltage test fixtures.
おすすめ
Aerospace and Defense Logic Replacement
The SX family's heritage in military and aerospace programs makes the A54SX32-2BG329 a sustainment choice for avionics boards needing form-fit-function refresh. The nonvolatile programming technology avoids configuration-storage devices susceptible to SEU-induced loss of configuration at power transition, and the sea-of-modules fabric supports the deterministic timing analysis documentation common in aerospace qualification packages. Temperature-grade variants (A54SX32-2BGG329I) cover extended ranges in the same 329-ball BGA footprint. For new aerospace designs, Microchip's RTAX radiation-tolerant family supersedes SX, but for existing platforms the SX32 remains a documented, sourcing-supported logic device.
おすすめ
Legacy Board Sustainment and Obsolescence Management
OEMs supporting long-life equipment use the A54SX32-2BG329 as the anchor for last-time-buy planning and footprint-compatible sparing. Because the full BG329 variant set (A54SX32-1BGG329I, A54SX32-BG329I, A54SX32A-2BG329) shares the 329-ball BGA land pattern, a single PCB layout accepts multiple speed and temperature grades, maximizing second-source flexibility when any one grade allocates. Procurement teams can alternate among grades based on timing margin analysis: designs closing timing at 240 MHz-class performance can accept the standard grade when -2 stock is constrained. Maintain recompile-capable design source in Actel/Microchip Designer tools to re-target grades without PCB changes.
おすすめ
Protocol Bridging and Interface Conversion
The A54SX32-2BG329 serves as a protocol bridge between legacy parallel buses and embedded controllers, implementing FIFOs, bus arbitration, and level-conforming interfaces in one device. Its 5V-tolerant I/O connects directly to TTL-era peripherals while the 3.3V core interfaces to modern microcontrollers, removing external bus-transceiver banks. With 32K gates, dual independent bus masters with arbitrated shared memory can be implemented alongside the bridge core. Deterministic fabric timing simplifies meeting bus setup/hold budgets specified in microseconds-class legacy timing diagrams. The 329-ball BGA keeps signal lengths matched, important when bridging clocked parallel buses above 50 MHz.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: A54SX32-2BG329 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | A54SX32-2BGG329I | A54SX32-1BGG329I | A54SX32-BG329I | A54SX32A-2BG329 |
|---|---|---|---|---|---|
| Package | 329-ball BGA (BG329) | 329-ball BGA - same | 329-ball BGA - same | 329-ball BGA - same | 329-ball BGA - same |
| Brand | Microchip Technology (Microsemi/Actel) | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| System Gates | 32,000 | 32,000 | 32,000 | 32,000 | 32,000-class (SX32A die) |
| Speed Grade / Max Toggle | -2 / 320 MHz | -2 / 320 MHz | -1 / slower than -2 | standard / 240 MHz-class | -2 / 320 MHz-class |
| Temperature Range | Commercial (standard) | Industrial | Industrial | Industrial | Commercial |
| Package Finish | Standard (non-green) | Green | Green | Standard | Standard |
主な差別化要因
- Fastest SX32 speed grade in the family （vs A54SX32-BG329I)
- Standard temperature rating at lower cost （vs A54SX32-2BGG329I)
- Proven legacy SX32 die (vs SX32A) （vs A54SX32A-2BG329)
設計ノート
Supply the A54SX32-2BG329 from a regulated 3.3V rail with an allowed window of 3.0V to 3.6V. Estimated: with 32K gates of 0.35 um CMOS fabric, static current is modest, but dynamic current scales with toggle rate - a design toggling a significant fraction of the fabric near 100 MHz can draw hundreds of milliamps, so size the core rail regulator accordingly. Place 0.1 uF ceramic decoupling capacitors on every supply ball pair plus bulk 10 uF near the BGA. The SX family also supports 5V-tolerant I/O; consult the SX datasheet input-structure section before driving balls from 5V logic.
The 329-ball BGA requires a controlled-impedance breakout with via-in-pad or dog-bone fanout. Follow the Microchip SX datasheet BG329 ball map exactly and verify your CAD footprint against SnapEDA's verified A54SX32-2BG329 symbol/footprint. Use at least 4 layers with a solid ground plane under the BGA to return high-speed switching currents. Because the same footprint accepts -1, -2, standard, and industrial grades, design the land pattern to the most restrictive reflow profile of the green (BGG) variants to keep the layout multi-source ready.
Do not assume stock continuity: the SX family is mature, and Octopart shows only 6 distributors carrying the A54SX32-2BG329. Qualify at least one same-footprint substitute (A54SX32-2BGG329I preferred - same -2 speed grade) in your design database before the primary part allocates. Also, timing closure must be re-verified when switching from -2 to -1 or standard grades; the toggle-rate drop is real, not nominal. Finally, keep the design source recompilable in Actel/Microchip Designer software, since BGA variants require re-targeting rather than bitstream reuse.
コンプライアンス情報
Compliance status not stated in provided web data. The BGG (green) variants of the same family are typically the halogen-free options; verify RoHS/REACH status on the Microchip product page or certificate of conformance for the exact date code.
