Analog Devices

AD9631ARZ - High-Speed RF Receiver Amp | Analog Devices

部品番号: AD9631ARZ ✓ 生産中
8-lead SOIC Package
MOQ: 1 |

AD9631ARZ 概要

The Analog Devices AD9631ARZ is a single-circuit, high-speed voltage-feedback operational amplifier designed for wide-bandwidth signal processing and pin-diode receiver applications. It is unity-gain stable, uses an 8-lead SOIC package, and is identified by Analog Devices as a production device. These characteristics place it in the amplifier IC hierarchy as a voltage-feedback op amp, analog signal amplifier, and high-speed signal-conditioning component.

A high-speed voltage-feedback operational amplifier provides closed-loop gain and signal conditioning while maintaining predictable bandwidth and settling behavior. Unlike a current-feedback amplifier, the AD9631 family uses a classical voltage-feedback architecture. This makes the AD9631 suitable for applications that previously required current-feedback amplifiers while preserving familiar closed-loop design methods.

The AD9631ARZ's principal documented feature is unity-gain stability. This allows engineers to configure the amplifier at a closed-loop gain of one when signal-chain bandwidth, stability, or analog headroom is important. The manufacturer describes the AD9631 and AD9632 as very-high-speed, wide-bandwidth amplifiers with exceptional settling time, bandwidth, and low distortion. The AD9631 differs from the gain-of-two-or-greater AD9632 in its unity-gain stability.

The AD9631 uses a classical voltage-feedback topology and contains one amplifier circuit. The manufacturer product page identifies the AD9631 as an improved-performance alternative to the AD9621 and AD9622, emphasizing the combination of settling performance, bandwidth, and distortion. The ARZ ordering code is associated with the leaded 8-SOIC form used in distributor catalog records.

Typical uses include wideband signal conditioning, high-speed receiver front ends, pin-diode receiver paths, and analog processing stages that require stable operation close to unity gain. It can also serve as an interface or gain stage ahead of high-speed converters when its voltage, noise, distortion, and settling characteristics match the signal path.

For layout, treat this as a high-speed analog device rather than a general-purpose op amp. Keep the feedback loop compact, provide a low-impedance return path, place bypassing capacitors close to the supply pins, and observe the manufacturer's recommended operating conditions. Confirm gain-bandwidth, output swing, input common-mode range, noise, distortion, and temperature limits against the current Analog Devices data sheet before production release.

This product page combines manufacturer status, package information, ordering-code differences, replacement constraints, and application-oriented design guidance. It also highlights the key engineering distinction between the unity-gain-stable AD9631 and the gain-of-two-or-greater AD9632, helping designers choose the correct amplifier without relying on family-level assumptions.

ドロップイン代替品: AD9631ARZ — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: AD9631ARZ (同一形状・フットプリント) — 相違点: Package, Amplifier Type, Architecture, Number of Circuits, Signal Type.

Analog Devices
Package: 8-SOIC
Amplifier Type: Voltage Feedback Amplifier
Architecture: Voltage feedback
比較対象 AD9631ARZ →
Analog Devices
Package: 8-pin SOIC
Amplifier Type: Voltage-feedback operational amplifier
Number of Circuits: 1
比較対象 AD9631ARZ →

AD9632AR-REEL7

✅ ドロップイン
📦 8-SOIC
Both use an 8-SOIC package, but minimum stable gain is one for AD9631ARZ versus two or greater for AD9632AR-REEL7, a one-gain-stage functional difference.

📋 参考代替品(カタログ未掲載)

AD9631ARZ 最大定格&電気的特性

Product Type Voltage-feedback operational amplifier
Amplifier Circuit Count 1 circuit
Architecture Classical voltage-feedback architecture
Gain Stability Unity-gain stable
パッケージ 8-lead SOIC
実装タイプ Surface mount
Product Status Production
Data Sheet Revision Rev. D
RoHS ステータス Compliant
REACH Status Unaffected
Moisture Sensitivity Level MSL 1

AD9631ARZ 8-lead soic ピン配置ガイド

AD9631ARZ (8-lead soic パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。

AD9631ARZ の 8-lead soic パッケージピン配置図

詳細なピン配置データはありません: AD9631ARZ.

詳細は データシート をご参照ください。

主な用途

AD9631ARZ の用途: 6 件s: Pin-Diode Receiver Front End, High-Speed ADC Driver, Precision Analog Signal Conditioning, RF Buffering and Level Interface, High-Speed Instrumentation Signal Path, Low-Amplitude Waveform Conditioning.

🌐

Pin-Diode Receiver Front End

The AD9631ARZ fits a pin-diode receiver front end because Analog Devices specifically identifies the device for pin-diode receiver use and confirms that it is stable at a closed-loop gain of one. Placing the amplifier in a gain-one or low-gain block can provide the required signal conditioning without relying on the minimum gain of two associated with the AD9632 family. Its voltage-feedback architecture also gives the designer a conventional closed-loop compensation method. The final stage gain, signal amplitude, and distortion target must remain within the limits published in Data Sheet Rev. D.

📺

High-Speed ADC Driver

AD9631ARZ can be evaluated as a high-speed ADC driver when the converter requires a low-impedance analog input and the signal chain operates near unity gain. Its unity-gain stability avoids imposing the gain-two-or-higher requirement associated with the AD9632, while the voltage-feedback topology supports conventional resistor feedback calculations. Bandwidth, slew rate, settling time, output swing, and noise must match the ADC acquisition requirements before use. Keep routing short and control return-current paths because parasitic inductance can degrade settling even when the intrinsic amplifier performance is acceptable.

🔧

Precision Analog Signal Conditioning

The AD9631ARZ is suitable for fast analog signal-conditioning stages where a unity-gain-compatible voltage-feedback amplifier provides better bandwidth flexibility than a minimum-gain-two device. The manufacturer positions the AD9631 as a classical voltage-feedback replacement for designs that previously used current-feedback amplifiers. A designer can implement gain, filtering, level translation, or impedance conversion around the amplifier while retaining the stability margin associated with gain-one operation. Confirm input common-mode range, output swing, and distortion for the actual signal excursion and DC bias.

📡

RF Buffering and Level Interface

AD9631ARZ can be used in RF-adjacent buffering paths where a wide-band voltage-feedback amplifier must preserve low-amplitude signals without requiring high closed-loop gain. Unity-gain stability is particularly relevant when the intended gain is one or the system relies on a low-noise gain-one block. The 8-lead SOIC implementation supports conventional surface-mount routing, but the amplifier still requires disciplined high-speed layout and local supply decoupling. Validate gain, phase margin, output loading, and distortion with the complete source and load rather than relying on open-loop characteristic alone.

🏭

High-Speed Instrumentation Signal Path

The AD9631ARZ can support fast instrumentation front ends when signal bandwidth requires more speed than a conventional precision amplifier and the circuit must remain stable at low gain. Analog Devices describes the family as very high speed and wide bandwidth, with low distortion and exceptional settling behavior. It is appropriate for laboratory or industrial signal paths that need configurable closed-loop gain, provided the selected feedback network remains compatible with the gain-bandwidth and stability limits in Data Sheet Rev. D. Pay particular attention to input bias behavior, noise, and common-mode range.

📈

Low-Amplitude Waveform Conditioning

AD9631ARZ can condition low-amplitude waveforms where fast settling and wide bandwidth are more important than a conventional precision op amp's simplicity. The unity-gain-stable architecture allows a designer to preserve signal amplitude in a gain-one interface while retaining classical voltage-feedback behavior. This can help reduce distortion in measurement and conversion chains when followed by a suitably accurate ADC. The complete signal path must be characterized for noise density, harmonic distortion, input offset, and output compliance. PCB symmetry and short feedback traces remain essential for preserving the device's high-speed behavior.

What is the AD9631ARZ?
The AD9631ARZ is a single, high-speed voltage-feedback operational amplifier in an 8-lead SOIC package. Analog Devices identifies the AD9631 as production and describes it as an ultralow-distortion, wide-bandwidth amplifier that is stable at a closed-loop gain of one. According to the manufacturer product page and Data Sheet Rev. D, it is intended for wide-bandwidth signal processing, including pin-diode receiver applications.
Is the AD9631ARZ unity-gain stable?
Yes, the AD9631ARZ is unity-gain stable. This is the defining distinction between the AD9631 and AD9632: the AD9631 can operate at a closed-loop gain of one, while the AD9632 is stable at gains of two or greater. Analog Devices describes both devices as very-high-speed, wide-bandwidth voltage-feedback amplifiers with exceptional settling time, bandwidth, and low distortion.
Where can I download the AD9631ARZ datasheet PDF?
The official AD9631 product page provides the manufacturer documentation and product-selection resources for the AD9631 family. It identifies the current data sheet as Rev. D and links the downloadable documentation. For design release, use the AD9631 Data Sheet Rev. D for the electrical characteristics, pin descriptions, package drawings, and recommended application circuits applicable to AD9631ARZ.
Where can I find the AD9631ARZ pinout?
The AD9631ARZ pinout is defined in the pin-description table and package drawing in the Analog Devices AD9631 Data Sheet Rev. D. The device is packaged as an 8-lead SOIC, but the exact signal, supply, and common-mode terminal names should be taken directly from that table before assigning PCB nets or making a drop-in substitution.
What is the difference between AD9631ARZ and AD9632AR?
The principal functional difference is minimum stable closed-loop gain. The AD9631ARZ is unity-gain stable, while the AD9632 is intended for gains of two or greater. Both belong to the AD9631/AD9632 high-speed voltage-feedback family. Because stability requirements differ, an AD9632 should not be treated as an automatic substitute for a unity-gain AD9631 circuit without reviewing the complete pinout and gain-dependent performance.
AD9631ARZ vs AD9632AR-REEL7: which is better for a unity-gain receiver?
Choose the AD9631ARZ for a receiver stage that must remain stable at a closed-loop gain of one. The AD9632 family is specified for gains of two or greater, so it can be less appropriate when the signal chain requires unity-gain operation. The comparison also includes package and ordering-code details, but stability and closed-loop gain behavior should determine the functional choice.
When should I choose AD9631ARZ over AD9632AR?
Choose AD9631ARZ when the amplifier must provide stable unity-gain operation, especially in a wideband receiver or signal-conditioning path where gain one is required. Choose an AD9632-family device when the signal chain operates at gain two or higher and its application-specific performance better fits the design. Confirm supply range, output swing, distortion, noise, and input common-mode limits before selecting either family.
Is AD9631ARZ suitable for pin-diode receiver applications?
Yes, AD9631ARZ is suitable for pin-diode receiver applications. The manufacturer describes the AD9631 as a wide-bandwidth single voltage-feedback operational amplifier for use with pin-diode receivers. Its unity-gain stability and voltage-feedback architecture are useful when the receiver path requires stable operation with low closed-loop gain and controlled analog amplification.
What can replace AD9631ARZ?
A valid replacement must use the same 8-lead SOIC footprint, preserve pin-to-pin connections, and meet the circuit’s gain, bandwidth, slew-rate, settling, noise, distortion, common-mode, and supply requirements. The available cross-reference results do not establish five distinct drop-in replacements. AD9631ARZ-REEL7 is an ordering variant rather than a distinct engineering alternative, while AD9631AR and AD9631AN use different leaded packages.
What is the best Analog Devices equivalent for AD9631ARZ?
The closest Analog Devices family comparison is the AD9632, but it is not automatically a drop-in replacement. Although AD9631 and AD9632 share the high-speed voltage-feedback family context and are often compared together, the AD9631 is unity-gain stable and the AD9632 is stable at gains of two or greater. Use AD9632 only after checking its pin assignments and the required closed-loop gain.
Where can I buy AD9631ARZ online?
Use the Request a Quote form on this page to request AD9631ARZ availability, lead time, and a formal quotation for the exact 8-lead SOIC ordering code. The manufacturer lists the AD9631 as production, while current channel inventory and lead time can vary by quantity and order configuration. Providing the target MPN AD9631ARZ in the request helps prevent substitution with a different package or ordering code.
What is the price of AD9631ARZ?
The current price for AD9631ARZ should be obtained through the Request a Quote form on this page because commercial pricing can change with quantity, inventory, and sourcing conditions. Submit the exact MPN AD9631ARZ and your required order quantity. Do not substitute AD9631ARZ-REEL7 unless the reel packing format and manufacturer ordering code are intentionally required by your assembly process.
Is AD9631ARZ in stock and what is its lead time?
Current stock and lead time for AD9631ARZ should be confirmed through the Request a Quote form on this page. Analog Devices identifies the AD9631 family as production, which indicates current product intent, but it does not establish a particular warehouse quantity or delivery date. State the required quantity, date code preference, and reel packaging requirement with the request.
What are the key specifications of AD9631ARZ that engineers should know?
The key confirmed characteristics of AD9631ARZ are its single-amplifier configuration, voltage-feedback architecture, unity-gain stability, production status, and 8-lead SOIC construction. Analog Devices also characterizes the family as very-high-speed, wide-bandwidth, low-distortion, and suitable for pin-diode receivers. Numerical bandwidth, slew rate, settling time, noise, swing, and supply limits must be taken from Data Sheet Rev. D.
How should AD9631ARZ be laid out in a high-speed PCB?
Place the AD9631ARZ in a layout optimized for a high-speed feedback loop, not as a general-purpose precision op amp. Keep the feedback components and signal traces short, provide a continuous return path, and place supply-bypass capacitors close to the device pins. Validate the final layout for ringing, oscillation, distortion, and settling because package, return-path, and decoupling details can affect high-speed analog performance.

エンジニアリング参考データ: AD9631ARZ — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose AD9631ARZ when the receiver or signal-conditioning path must remain stable at a closed-loop gain of one. Its classical voltage-feedback architecture, production status, and 8-lead SOIC package make it the appropriate member of the high-speed AD9631 family for low-gain wideband designs. Consider AD9632AR-REEL7 only when the circuit operates at gain two or greater and its other electrical characteristics provide a better match; the identical package does not eliminate the minimum-gain difference. AD9631AR and AD9631AN are not drop-in options for an AD9631ARZ board because their leaded packages do not match the SOIC footprint. For every substitution, verify the complete pinout, supply range, common-mode range, output swing, noise, distortion, slew rate, and settling behavior against Data Sheet Rev. D.

代替品との比較

パラメータ この製品 AD9632AR-REEL7
Package 8-SOIC 8-SOIC
Brand Analog Devices Analog Devices
Amplifier Circuit Count 1 circuit 1 circuit
Architecture Classical voltage feedback Voltage feedback
Minimum Stable Gain 1 2 or greater

主な差別化要因

  • Supports stable operation at closed-loop gain one (vs AD9632AR-REEL7)
  • Uses a classical voltage-feedback architecture (vs AD9632AR-REEL7)
  • Matches an 8-lead SOIC receiver-amplifier footprint (vs AD9632AR-REEL7)

設計ノート

Treat the AD9631ARZ as a high-speed voltage-feedback amplifier and minimize the feedback-loop area. Place the feedback resistors close to the device, keep input and output traces short, and avoid routing sensitive signals adjacent to digital or switching-current paths. Maintain a continuous ground reference beneath and around the signal route so that return current does not share a path with unrelated circuitry. Verify the final board for ringing and settling degradation with the actual source impedance and load.

Place the supply-bypass capacitor directly between the supply pin and the appropriate ground reference, with the shortest possible traces. Do not assume that a long connection to a bulk capacitor can replace local high-frequency bypassing; parasitic inductance in that route can create an impedance peak within the amplifier's operating bandwidth. Check the capacitor's effective high-frequency characteristics, DC-bias derating, and placement in the final assembly before release.

Evaluate gain, phase margin, and settling using the complete source and load rather than only the nominal gain-one condition. Input capacitance, cable length, ADC acquisition circuitry, and output loading can change the effective response. Use the manufacturer's recommended feedback values and preserve a symmetric layout. For ADC interfaces, verify settling against the converter's acquisition window and keep the amplifier output connection short.

Do not substitute AD9632AR-REEL7 solely because it uses the same 8-SOIC package. The AD9631 is specified for unity-gain stability, while the AD9632 is stable at gains of two or greater; replacing the part can change stability and phase margin even if the land pattern matches. Also distinguish AD9631ARZ from AD9631ARZ-REEL7 by its manufacturer ordering code, and confirm the required tape-and-reel format before releasing a purchase order.

コンプライアンス情報

RoHS
Compliant
REACH
Compliant
AEC-Q100
Not Applicable
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

RoHS compliance, REACH unaffected status, and MSL 1 are identified in the AD9631ARZ product records. Lead-free, halogen-free, and conflict-minerals status are not established by the cited manufacturer material.

データ検証日: 2026-11-19 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

ad9631arz digikey AD9631ARZ datasheet AD9631ARZ datasheet pdf AD9631ARZ pinout AD9631ARZ specifications AD9631ARZ equivalent AD9631ARZ replacement AD9631ARZ vs AD9632AR Analog Devices AD9631ARZ AD9631ARZ 8-SOIC amplifier AD9631ARZ pin-diode receiver AD9631ARZ price AD9631ARZ stock AD9631 unity-gain op amp

関連部品&用語

Analog Devices AD9631ARZ AD9631 AD9632AR-REEL7 voltage-feedback operational amplifier high-speed operational amplifier voltage-feedback architecture unity-gain stable classical op amp wide-bandwidth amplifier pin-diode receiver signal conditioning ADC driver 8-SOIC package surface-mount package SMD settling time low distortion gain-bandwidth product slew rate RoHS REACH MSL 1 Analog Devices Data Sheet Rev. D
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示