Analog Devices

ADM231LJN - 5V 120kbps RS-232 Transceiver | Analog Devices

部品番号: ADM231LJN ✗ 生産終了
5 V Vdss 16-pin PDIP Package
MOQ: 1 |

ADM231LJN 概要

Analog Devices ADM231LJN is a 5 V-powered CMOS RS-232 driver and receiver operating at up to 120 kB/s, with 9 V output swing from a single 5 V supply and external 1 F charge-pump capacitors. The device is packaged in a 16-pin PDIP format for through-hole PCB installation.

An RS-232 transceiver is an interface IC that converts logic-level digital signals into differential, bipolar RS-232 levels and converts received RS-232 signals back into CMOS-compatible logic. Positioned within the hierarchy of interface controllers, transceivers, and semiconductors, the ADM231LJN is designed for EIA-232-E and V.28 communications where a traditional ±12 V supply is unavailable. Its integrated DC-DC converter allows one-sided, single-supply operation.

The principal features include a single 5 V supply, operation at 120 kB/s, 9 V RS-232 output swing, onboard DC-DC conversion, and small external charge-pump capacitors. These characteristics allow a compact interface to operate from a regulated 5 V rail rather than requiring separate positive and negative RS-232 supply rails. The receiver also tolerates inputs extending to 30 V, providing additional protection margin when an external line or connected equipment presents an elevated voltage.

The device combines CMOS logic compatibility with analog line-driver and receiver functions in one package. Onboard charge-pump circuitry develops the positive and negative voltages needed for RS-232 signaling. Although the implementation is compact, correct capacitor selection and placement remain important because charge-pump voltage determines usable line swing and signal integrity. The 120 kB/s capability is suitable for instrumentation, industrial control, data acquisition, and embedded serial links that do not require the maximum rate of newer RS-232 transceivers.

Typical applications include laboratory instruments, industrial controllers, barcode and identification equipment, point-of-sale terminals, and embedded systems communicating with legacy RS-232 peripherals. A single 5 V rail simplifies system power design while preserving the voltage levels expected by conventional RS-232 ports. The 30 V receiver-input rating should still be paired with normal ESD protection and correctly routed grounding.

For reliable implementation, place the external charge-pump capacitors close to their designated pins, route the RS-232 driver outputs away from sensitive logic, and provide a stable ground reference between communicating systems. Confirm that the connected equipment uses EIA-232-E signal levels rather than TTL, RS-422, RS-485, or another interface. The 120 kB/s rate and 9 V output swing should also be checked against cable length and system timing.

This product overview combines the manufacturer's interface, speed, voltage, and package characteristics with practical guidance on charge-pump capacitors, grounding, signal routing, and drop-in substitution. It helps engineers evaluate the ADM231LJN faster when designing a 5 V-only RS-232 interface around a legacy peripheral or communication port.

ドロップイン代替品: ADM231LJN — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: ADM231LJN (同一形状・フットプリント) — 相違点: Product Type, RS-232 Output Swing, Package, ESD Protection, Operating Temperature.

Analog Devices
Product Type: RS-232 transceiver
RS-232 Output Swing: Approximately ±9 V from a 5 V supply
Operating Temperature: 0°C to 70°C
比較対象 ADM231LJN →
Analog Devices
Product Type: RS-232 driver/receiver transceiver IC
RS-232 Output Swing: Approximately 9 V with 5 V supply
Package: 24-pin DIP, 7.62 mm row spacing
比較対象 ADM231LJN →

ADM232LJN

✅ ドロップイン
Analog Devices
📦 16-pin PDIP
RS-232 transceiver · 2 transmitters and 2 receivers · 5 V · 120 kB/s · EIA-232-E and V.28 · Approximately ±9 V from a 5 V supply · Yes · 1 µF

価格はお問い合わせください

データシートを見る →

ADM231LJN 仕様

Product Type RS-232 driver/receiver transceiver
電源電圧 5 V
データレート 120 kB/s
RS-232 Output Swing 9 V
DC-DC Converter Onboard
External Charge-Pump Capacitor 1 F
Receiver Input Voltage 30 V
ESD Protection > 2 kV
Interface Compliance EIA-232-E and V.28
Logic Technology CMOS
Power-Supply Configuration Single 5 V supply
パッケージ 16-pin PDIP
実装タイプ Through-hole
RoHS ステータス unknown
REACH Status unknown

ADM231LJN 16-pin pdip ピン配置ガイド

ADM231LJN (16-pin pdip パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。

ADM231LJN の 16-pin pdip パッケージピン配置図

詳細なピン配置データはありません: ADM231LJN.

詳細は データシート をご参照ください。

主な用途

ADM231LJN の用途: 6 件s: Industrial Instrument Serial Port, Embedded Controller RS-232 Link, Point-of-Sale Terminal Interface, Data Acquisition Equipment, Barcode and Identification Equipment, Legacy PC Serial Adapter.

🏭

Industrial Instrument Serial Port

The ADM231LJN is well suited to a legacy RS-232 instrument interface because it combines one driver and one receiver with operation from a single 5 V rail. Its 120 kB/s maximum data rate covers common command and measurement traffic, while approximately 9 V of output swing supports conventional EIA-232-E and V.28 endpoints. The onboard DC-DC converter eliminates separate ±12 V rails, simplifying the instrument power tree. Place the charge-pump capacitors close to the IC and provide a stable ground reference to the connected equipment to minimize logic noise and communication errors.

🔧

Embedded Controller RS-232 Link

Use the ADM231LJN when an embedded controller needs to communicate with a conventional RS-232 peripheral but only has a 5 V power rail available. The single-supply architecture removes the need for a bipolar supply, while the 120 kB/s data rate is suitable for command protocols, diagnostic logs, and configuration transfers. The approximately 9 V line swing targets standard RS-232 signaling, and the 30 V receiver-input capability provides useful margin. Firmware should include baud-rate parity and framing checks because the physical interface does not validate message integrity.

🖥️

Point-of-Sale Terminal Interface

The ADM231LJN can provide a compact 5 V RS-232 interface for point-of-sale equipment that communicates with a legacy printer, scanner, or customer-display terminal. Its 120 kB/s rate is more than adequate for short command packets and status exchanges, while onboard DC-DC conversion simplifies the terminal's supply design. The 16-pin PDIP format supports through-hole assembly and maintenance-friendly prototyping. Keep the driver trace away from display and audio circuitry, and verify the peripheral's ground reference because an RS-232 connection is not an isolated communication channel.

📡

Data Acquisition Equipment

For laboratory and industrial data-acquisition equipment, the ADM231LJN supplies a straightforward 5 V-only link to a legacy instrument. The 120 kB/s capability supports continuous measurement data, configuration commands, and periodic status reporting at rates commonly used by older serial instruments. Approximately 9 V of RS-232 output swing improves compatibility with standard V.28 equipment, while the receiver's 30 V input tolerance adds protection margin. Use short, properly referenced cabling and keep charge-pump switching paths away from sensitive sensor and reference circuits.

📷

Barcode and Identification Equipment

The ADM231LJN fits barcode scanners, identification readers, and local operator interfaces that use a legacy RS-232 host connection. The 120 kB/s rate readily handles scanner packets and short configuration messages, and the single 5 V supply reduces the required power-tree complexity. The approximately 9 V output swing addresses EIA-232-E and V.28 signaling needs without external charge-pump ICs. For cables routed near motors or switching supplies, retain the receiver-input margin and use appropriate surge and ESD protection at the connector.

💻

Legacy PC Serial Adapter

The ADM231LJN is suitable for a legacy serial adapter built around modern 5 V electronics. It replaces the need for a separate ±12 V supply while retaining the approximately 9 V RS-232 output swing expected by older desktop peripherals. Its 120 kB/s data rate accommodates configuration and control traffic rather than high-speed continuous transfers. The 16-pin PDIP package is convenient for through-hole designs, but firmware and cabling should use compatible framing, grounding, and flow control. A DB-9 implementation must also account for connector pinout differences among equipment families.

What is the ADM231LJN?
The ADM231LJN is a single-supply CMOS RS-232 driver and receiver from Analog Devices. It operates from 5 V, supports data rates up to 120 kB/s, and provides approximately 9 V of RS-232 output swing using onboard DC-DC conversion. According to the Analog Devices ADM231L-family datasheet, the device is intended for EIA-232-E and V.28 interfaces where ±12 V is unavailable, making it useful for compact embedded and industrial serial-port designs.
What is the operating voltage of ADM231LJN?
The ADM231LJN operates from a single 5 V supply. Its onboard DC-DC converter produces the positive and negative voltages needed for RS-232 signaling, so external ±12 V rails are not required. According to the Analog Devices ADM231L-family datasheet, the resulting line-driver output reaches approximately 9 V in magnitude, providing compatibility with conventional EIA-232-E and V.28 equipment while simplifying system power architecture.
How fast can ADM231LJN transmit RS-232 data?
The ADM231LJN supports RS-232 data rates up to 120 kB/s. According to the Analog Devices ADM231L-family datasheet, the transceiver is intended for EIA-232-E and V.28 communications while operating from one 5 V rail. The 120 kB/s limit is ample for many legacy serial peripherals, diagnostic ports, industrial controllers, and data-acquisition equipment, but cable length and receiver loading must also be checked before assuming the maximum rate on every installation.
Does ADM231LJN need external positive and negative power supplies?
No. The ADM231LJN requires only a single 5 V supply because it includes onboard DC-DC conversion for the bipolar RS-232 line voltages. According to the Analog Devices ADM231L-family datasheet, the device can produce about 9 V of output swing from the 5 V rail. The external charge-pump capacitors still need to be connected as directed, with correct capacitance and placement, to support stable operation of the internal converter.
Where can I download the ADM231LJN datasheet PDF?
The ADM231LJN datasheet PDF is available from Analog Devices through the manufacturer's ADM231L, ADM232L, ADM233L, ADM234L, ADM236L, ADM237L, ADM238L, ADM239L, and ADM241L family data sheet. The document identifies the electrical characteristics, family differences, typical interfaces, and package information. Use the manufacturer PDF for final pin assignments, timing limits, power-supply limits, and application-specific values before completing a circuit design.
Where can I find the ADM231LJN pinout?
The ADM231LJN pinout is shown in the pin-configuration and package drawings of the Analog Devices ADM231L-family datasheet. Use that diagram when assigning the 16 PDIP leads, charge-pump capacitor connections, supply pins, driver outputs, and receiver inputs. For a new layout, follow the manufacturer's numbering in counter-clockwise order around the package and keep external charge-pump capacitors close to the relevant device pins.
What are the key specifications of ADM231LJN that engineers should know?
The ADM231LJN is a 5 V, 120 kB/s CMOS RS-232 transceiver with onboard DC-DC conversion, approximately 9 V output swing, and receiver input capability up to 30 V. It supports EIA-232-E and V.28 interfaces and is available in a 16-pin PDIP package. According to the Analog Devices ADM231L-family datasheet, ESD protection exceeds 2 kV, while the small external capacitor requirement supports compact single-supply interface designs.
What can replace the ADM231LJN?
The ADM232LJN is the closest documented same-manufacturer alternative for a design review, but it should not be treated as a guaranteed drop-in replacement without checking its enable and pin-function behavior. The available cross-reference results identify ADM232LJN as a related 16-pin RS-232 transceiver, yet they do not establish complete pin-to-pin equivalence for every ADM231LJN function. Verify the Analog Devices family data sheet, especially shutdown control, unused channels, and required external components, before substitution.
Is the ADM231LJN the same as the MAX232EIN?
The ADM231LJN and MAX232EIN are both RS-232 interface ICs offered in 16-pin through-hole packages, but their channel configurations and shutdown-related functions require direct comparison. The ADM231L family data sheet describes the ADM231L as a single-supply, low-power, one-driver/one-receiver device, whereas the MAX232EIN belongs to a different multi-channel RS-232 family. Consult both manufacturers' pinouts before treating either device as a drop-in substitute.
When should I choose ADM231LJN over another RS-232 transceiver?
Choose the ADM231LJN when the interface requires only one transmit and one receive channel, operates from a 5 V-only supply, and needs data rates up to 120 kB/s. Its onboard DC-DC conversion removes the need for external positive and negative RS-232 rails, while the 30 V receiver-input rating adds line-side tolerance. Select another family member when additional channels, different shutdown behavior, or a smaller surface-mount package is required.
Is ADM231LJN suitable for industrial RS-232 equipment?
The ADM231LJN is suitable for many industrial RS-232 interfaces that use a 5 V supply and operate at or below 120 kB/s. According to the Analog Devices ADM231L-family datasheet, the device meets EIA-232-E and V.28 specifications and includes onboard DC-DC conversion. Industrial suitability should still be confirmed against the required ambient temperature, isolation arrangement, surge environment, grounding method, and applicable equipment qualification requirements.
How should I handle the ADM231LJN charge-pump capacitors?
Connect the ADM231LJN external charge-pump capacitors using the values and polarity shown in the Analog Devices ADM231L-family datasheet. Place each capacitor close to the associated IC pins and minimize loop area so switching transients do not couple into adjacent signals. Correct capacitor selection also supports the approximately 9 V RS-232 output swing. If output levels or data errors appear unstable, inspect capacitor placement, supply bypassing, ground continuity, and line termination before changing the firmware.
How should I protect an ADM231LJN RS-232 interface?
Protect the ADM231LJN interface by using the specified charge-pump and supply capacitors, maintaining a low-impedance ground connection, and routing the RS-232 driver output away from sensitive analog and logic traces. The receiver accepts voltages up to 30 V, but that rating does not replace surge protection, isolation, or cable-level design. For exposed industrial ports, add the protection required by the installation's ESD and transient environment and verify it against the interface requirements.
Where can I buy ADM231LJN and what is its price?
Use the Request a Quote form on this page to request ADM231LJN pricing, current stock status, lead time, and order quantities. The page's structured pricing panel reflects current channel data when an explicit quantity-break listing is available. A complete commercial response should confirm the exact 16-pin PDIP ordering code, quantity, delivery schedule, and any assembly or handling requirements before an order is placed.
What is the lead time for ADM231LJN?
The current lead time for ADM231LJN should be obtained through the Request a Quote form on this page. The manufacturer family data sheet defines device characteristics but does not establish a current order lead time for an individual purchase. A useful quote should include the requested quantity, 16-pin PDIP packaging requirement, production or prototype use, and required delivery date so the current channel response reflects the actual schedule.
Is ADM231LJN currently in stock?
Current ADM231LJN inventory should be confirmed through the Request a Quote form on this page. Availability can vary by quantity and order code, and a product-page search result alone is not a reservation or confirmed stock commitment. Include the required quantity and delivery schedule in the request so the quotation can identify immediately available material and any production or back-order lead time.

エンジニアリング参考データ: ADM231LJN — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the ADM231LJN for a compact RS-232 interface that needs one transmit and one receive channel, operates from a single 5 V rail, and remains below 120 kB/s. Its onboard DC-DC converter, approximately 9 V output swing, and 16-pin PDIP package are particularly useful in legacy instrument and controller designs. The ADM232LJN is the closest related candidate for schematic review, but shutdown behavior and lead assignments must be checked before it is treated as a drop-in replacement. A multi-channel RS-232 device may be preferable when one port must support several drivers and receivers. For systems requiring galvanic isolation, differential signaling, or longer-distance multidrop communication, choose an isolated RS-232 interface or RS-485 transceiver instead. Confirm the exact pinout, temperature range, external capacitor values, and line-protection requirements against the manufacturer data sheet before releasing the PCB.

代替品との比較

パラメータ この製品 ADM232LJN
Brand Analog Devices Analog Devices
Package 16-pin PDIP 16-pin PDIP - same package
Product Type RS-232 driver/receiver transceiver RS-232 driver/receiver transceiver
Supply Voltage 5 V 5 V
Data Rate 120 kB/s 120 kB/s
RS-232 Output Swing 9 V 9 V
Receiver Input Voltage 30 V 30 V
DC-DC Converter Onboard Onboard
Interface Compliance EIA-232-E and V.28 EIA-232-E and V.28
ESD Protection > 2 kV > 2 kV

主な差別化要因

  • Single-supply RS-232 operation (vs ADM232LJN)
  • Single-driver and single-receiver architecture (vs ADM232LJN)
  • RS-232 line-side tolerance (vs ADM232LJN)

設計ノート

Place the external charge-pump capacitors directly beside the ADM231LJN pins designated for them in the Analog Devices family data sheet. Keep each capacitor's connection loop short and provide local supply bypassing at the device. Correct placement limits charge-pump switching transients, supports stable RS-232 output swing, and reduces coupling into nearby clock, measurement, or control traces. Confirm capacitance value and polarity against the manufacturer diagram before layout release.

Do not treat the 30 V receiver-input rating as a substitute for surge protection. RS-232 cables can expose ports to external transients, particularly when equipment is connected to long outdoor or industrial wiring. Assess the installation's ESD and surge environment, add the required connector-side protection, and maintain a common ground reference between communicating systems. Also verify that the remote equipment uses RS-232 rather than TTL, RS-422, RS-485, or another incompatible interface.

Route the RS-232 driver outputs away from sensitive analog inputs and low-level digital signals, and keep the charge-pump section away from reference and sensor circuitry. The ADM231LJN can operate at up to 120 kB/s, so edge rates can be faster than the nominal data rate. Maintain practical return paths and avoid unnecessary stubs. A single, stable ground reference is required because the RS-232 voltage levels are referenced to the interface ground rather than being isolated.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The EIA-232-E and V.28 interface specifications and greater-than-2-kV ESD characteristic are documented in the Analog Devices ADM231L-family data sheet. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation from current manufacturer product documentation.

データ検証日: 2026-11-09 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

ADM231LJN datasheet ADM231LJN pinout ADM231LJN datasheet pdf ADM231LJN equivalent ADM231LJN replacement ADM231LJN cross reference ADM231LJN vs ADM232LJN ADM231LJN price ADM231LJN stock Analog Devices ADM231LJN ADM231LJN 120kbps RS-232 ADM231LJN 5V transceiver ADM231LJN PDIP-16 ADM231LJN industrial interface ADM231LJN schematic

関連部品&用語

Analog Devices ADM231LJN ADM232LJN MAX232EIN RS-232 transceiver RS-232 driver RS-232 receiver interface IC line driver/receiver CMOS EIA-232-E V.28 DC-DC converter charge-pump capacitor 120 kB/s 9 V output swing 30 V receiver input single 5 V supply 16-pin PDIP PDIP package through-hole mount RS-232 instrumentation industrial serial communication legacy PC serial interface barcode scanner interface
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示