ADM231LJN - 5V 120kbps RS-232 Transceiver | Analog Devices
MPN: ADM231LJN ✗ Son Kullanım ZamanıADM231LJN Genel Bakış
An RS-232 transceiver is an interface IC that converts logic-level digital signals into differential, bipolar RS-232 levels and converts received RS-232 signals back into CMOS-compatible logic. Positioned within the hierarchy of interface controllers, transceivers, and semiconductors, the ADM231LJN is designed for EIA-232-E and V.28 communications where a traditional ±12 V supply is unavailable. Its integrated DC-DC converter allows one-sided, single-supply operation.
The principal features include a single 5 V supply, operation at 120 kB/s, 9 V RS-232 output swing, onboard DC-DC conversion, and small external charge-pump capacitors. These characteristics allow a compact interface to operate from a regulated 5 V rail rather than requiring separate positive and negative RS-232 supply rails. The receiver also tolerates inputs extending to 30 V, providing additional protection margin when an external line or connected equipment presents an elevated voltage.
The device combines CMOS logic compatibility with analog line-driver and receiver functions in one package. Onboard charge-pump circuitry develops the positive and negative voltages needed for RS-232 signaling. Although the implementation is compact, correct capacitor selection and placement remain important because charge-pump voltage determines usable line swing and signal integrity. The 120 kB/s capability is suitable for instrumentation, industrial control, data acquisition, and embedded serial links that do not require the maximum rate of newer RS-232 transceivers.
Typical applications include laboratory instruments, industrial controllers, barcode and identification equipment, point-of-sale terminals, and embedded systems communicating with legacy RS-232 peripherals. A single 5 V rail simplifies system power design while preserving the voltage levels expected by conventional RS-232 ports. The 30 V receiver-input rating should still be paired with normal ESD protection and correctly routed grounding.
For reliable implementation, place the external charge-pump capacitors close to their designated pins, route the RS-232 driver outputs away from sensitive logic, and provide a stable ground reference between communicating systems. Confirm that the connected equipment uses EIA-232-E signal levels rather than TTL, RS-422, RS-485, or another interface. The 120 kB/s rate and 9 V output swing should also be checked against cable length and system timing.
This product overview combines the manufacturer's interface, speed, voltage, and package characteristics with practical guidance on charge-pump capacitors, grounding, signal routing, and drop-in substitution. It helps engineers evaluate the ADM231LJN faster when designing a 5 V-only RS-232 interface around a legacy peripheral or communication port.
Drop-in alternatifler için ADM231LJN — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller ADM231LJN (aynı form faktörü ve ayağa oturma) — farklı olan Product Type, RS-232 Output Swing, Package, ESD Protection, Operating Temperature.
ADM232LJN
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →ADM231LJN Özellikler
| Product Type | RS-232 driver/receiver transceiver |
| Besleme Gerilimi | 5 V |
| Veri Hızı | 120 kB/s |
| RS-232 Output Swing | 9 V |
| DC-DC Converter | Onboard |
| External Charge-Pump Capacitor | 1 F |
| Receiver Input Voltage | 30 V |
| ESD Protection | > 2 kV |
| Interface Compliance | EIA-232-E and V.28 |
| Logic Technology | CMOS |
| Power-Supply Configuration | Single 5 V supply |
| Paket | 16-pin PDIP |
| Montaj Türü | Through-hole |
| RoHS Durumu | unknown |
| REACH Status | unknown |
ADM231LJN 16-pin pdip Pin Yapısı Kılavuzu
ADM231LJN (16-pin pdip paket) için pin yapısı. Pin numaralandırma, işlevleri ve bağlantı şemaları üretici veri kitapçığında tanımlanmıştır. Doğru ayak ve soldurma kılavuzları için onu referans alın.
Ayrıntılı pin çıkış verisi mevcut değil: ADM231LJN.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
ADM231LJN için uygundur 6 uygulamas: Industrial Instrument Serial Port, Embedded Controller RS-232 Link, Point-of-Sale Terminal Interface, Data Acquisition Equipment, Barcode and Identification Equipment, Legacy PC Serial Adapter.
Industrial Instrument Serial Port
The ADM231LJN is well suited to a legacy RS-232 instrument interface because it combines one driver and one receiver with operation from a single 5 V rail. Its 120 kB/s maximum data rate covers common command and measurement traffic, while approximately 9 V of output swing supports conventional EIA-232-E and V.28 endpoints. The onboard DC-DC converter eliminates separate ±12 V rails, simplifying the instrument power tree. Place the charge-pump capacitors close to the IC and provide a stable ground reference to the connected equipment to minimize logic noise and communication errors.
Önerilen
Embedded Controller RS-232 Link
Use the ADM231LJN when an embedded controller needs to communicate with a conventional RS-232 peripheral but only has a 5 V power rail available. The single-supply architecture removes the need for a bipolar supply, while the 120 kB/s data rate is suitable for command protocols, diagnostic logs, and configuration transfers. The approximately 9 V line swing targets standard RS-232 signaling, and the 30 V receiver-input capability provides useful margin. Firmware should include baud-rate parity and framing checks because the physical interface does not validate message integrity.
Önerilen
Point-of-Sale Terminal Interface
The ADM231LJN can provide a compact 5 V RS-232 interface for point-of-sale equipment that communicates with a legacy printer, scanner, or customer-display terminal. Its 120 kB/s rate is more than adequate for short command packets and status exchanges, while onboard DC-DC conversion simplifies the terminal's supply design. The 16-pin PDIP format supports through-hole assembly and maintenance-friendly prototyping. Keep the driver trace away from display and audio circuitry, and verify the peripheral's ground reference because an RS-232 connection is not an isolated communication channel.
Önerilen
Data Acquisition Equipment
For laboratory and industrial data-acquisition equipment, the ADM231LJN supplies a straightforward 5 V-only link to a legacy instrument. The 120 kB/s capability supports continuous measurement data, configuration commands, and periodic status reporting at rates commonly used by older serial instruments. Approximately 9 V of RS-232 output swing improves compatibility with standard V.28 equipment, while the receiver's 30 V input tolerance adds protection margin. Use short, properly referenced cabling and keep charge-pump switching paths away from sensitive sensor and reference circuits.
Önerilen
Barcode and Identification Equipment
The ADM231LJN fits barcode scanners, identification readers, and local operator interfaces that use a legacy RS-232 host connection. The 120 kB/s rate readily handles scanner packets and short configuration messages, and the single 5 V supply reduces the required power-tree complexity. The approximately 9 V output swing addresses EIA-232-E and V.28 signaling needs without external charge-pump ICs. For cables routed near motors or switching supplies, retain the receiver-input margin and use appropriate surge and ESD protection at the connector.
Önerilen
Legacy PC Serial Adapter
The ADM231LJN is suitable for a legacy serial adapter built around modern 5 V electronics. It replaces the need for a separate ±12 V supply while retaining the approximately 9 V RS-232 output swing expected by older desktop peripherals. Its 120 kB/s data rate accommodates configuration and control traffic rather than high-speed continuous transfers. The 16-pin PDIP package is convenient for through-hole designs, but firmware and cabling should use compatible framing, grounding, and flow control. A DB-9 implementation must also account for connector pinout differences among equipment families.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: ADM231LJN — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | ADM232LJN |
|---|---|---|
| Brand | Analog Devices | Analog Devices |
| Package | 16-pin PDIP | 16-pin PDIP - same package |
| Product Type | RS-232 driver/receiver transceiver | RS-232 driver/receiver transceiver |
| Supply Voltage | 5 V | 5 V |
| Data Rate | 120 kB/s | 120 kB/s |
| RS-232 Output Swing | 9 V | 9 V |
| Receiver Input Voltage | 30 V | 30 V |
| DC-DC Converter | Onboard | Onboard |
| Interface Compliance | EIA-232-E and V.28 | EIA-232-E and V.28 |
| ESD Protection | > 2 kV | > 2 kV |
Ana Farklılayıcılar
- Single-supply RS-232 operation (karşılaştırma:ADM232LJN)
- Single-driver and single-receiver architecture (karşılaştırma:ADM232LJN)
- RS-232 line-side tolerance (karşılaştırma:ADM232LJN)
Tasarım Notları
Place the external charge-pump capacitors directly beside the ADM231LJN pins designated for them in the Analog Devices family data sheet. Keep each capacitor's connection loop short and provide local supply bypassing at the device. Correct placement limits charge-pump switching transients, supports stable RS-232 output swing, and reduces coupling into nearby clock, measurement, or control traces. Confirm capacitance value and polarity against the manufacturer diagram before layout release.
Do not treat the 30 V receiver-input rating as a substitute for surge protection. RS-232 cables can expose ports to external transients, particularly when equipment is connected to long outdoor or industrial wiring. Assess the installation's ESD and surge environment, add the required connector-side protection, and maintain a common ground reference between communicating systems. Also verify that the remote equipment uses RS-232 rather than TTL, RS-422, RS-485, or another incompatible interface.
Route the RS-232 driver outputs away from sensitive analog inputs and low-level digital signals, and keep the charge-pump section away from reference and sensor circuitry. The ADM231LJN can operate at up to 120 kB/s, so edge rates can be faster than the nominal data rate. Maintain practical return paths and avoid unnecessary stubs. A single, stable ground reference is required because the RS-232 voltage levels are referenced to the interface ground rather than being isolated.
Uyumluluk Bilgisi
The EIA-232-E and V.28 interface specifications and greater-than-2-kV ESD characteristic are documented in the Analog Devices ADM231L-family data sheet. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation from current manufacturer product documentation.