ADM231LJN - 5V 120kbps RS-232 Transceiver | Analog Devices
MPN: ADM231LJN ✗ 停產ADM231LJN 概覽
An RS-232 transceiver is an interface IC that converts logic-level digital signals into differential, bipolar RS-232 levels and converts received RS-232 signals back into CMOS-compatible logic. Positioned within the hierarchy of interface controllers, transceivers, and semiconductors, the ADM231LJN is designed for EIA-232-E and V.28 communications where a traditional ±12 V supply is unavailable. Its integrated DC-DC converter allows one-sided, single-supply operation.
The principal features include a single 5 V supply, operation at 120 kB/s, 9 V RS-232 output swing, onboard DC-DC conversion, and small external charge-pump capacitors. These characteristics allow a compact interface to operate from a regulated 5 V rail rather than requiring separate positive and negative RS-232 supply rails. The receiver also tolerates inputs extending to 30 V, providing additional protection margin when an external line or connected equipment presents an elevated voltage.
The device combines CMOS logic compatibility with analog line-driver and receiver functions in one package. Onboard charge-pump circuitry develops the positive and negative voltages needed for RS-232 signaling. Although the implementation is compact, correct capacitor selection and placement remain important because charge-pump voltage determines usable line swing and signal integrity. The 120 kB/s capability is suitable for instrumentation, industrial control, data acquisition, and embedded serial links that do not require the maximum rate of newer RS-232 transceivers.
Typical applications include laboratory instruments, industrial controllers, barcode and identification equipment, point-of-sale terminals, and embedded systems communicating with legacy RS-232 peripherals. A single 5 V rail simplifies system power design while preserving the voltage levels expected by conventional RS-232 ports. The 30 V receiver-input rating should still be paired with normal ESD protection and correctly routed grounding.
For reliable implementation, place the external charge-pump capacitors close to their designated pins, route the RS-232 driver outputs away from sensitive logic, and provide a stable ground reference between communicating systems. Confirm that the connected equipment uses EIA-232-E signal levels rather than TTL, RS-422, RS-485, or another interface. The 120 kB/s rate and 9 V output swing should also be checked against cable length and system timing.
This product overview combines the manufacturer's interface, speed, voltage, and package characteristics with practical guidance on charge-pump capacitors, grounding, signal routing, and drop-in substitution. It helps engineers evaluate the ADM231LJN faster when designing a 5 V-only RS-232 interface around a legacy peripheral or communication port.
直接替換替代品,適用於 ADM231LJN — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: ADM231LJN (相同外形與佔位) — 差異在於 Product Type, RS-232 Output Swing, Package, ESD Protection, Operating Temperature.
ADM231LJN 規格
| Product Type | RS-232 driver/receiver transceiver |
| 供應電壓 | 5 V |
| 資料速率 | 120 kB/s |
| RS-232 Output Swing | 9 V |
| DC-DC Converter | Onboard |
| External Charge-Pump Capacitor | 1 F |
| Receiver Input Voltage | 30 V |
| ESD Protection | > 2 kV |
| Interface Compliance | EIA-232-E and V.28 |
| Logic Technology | CMOS |
| Power-Supply Configuration | Single 5 V supply |
| 封裝 | 16-pin PDIP |
| 安裝類型 | Through-hole |
| RoHS 狀態 | unknown |
| REACH Status | unknown |
ADM231LJN 16-pin pdip 腳位配置指南
ADM231LJN(16-pin pdip 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: ADM231LJN.
請參閱 資料表 以查看完整腳位配置。
典型應用
ADM231LJN 適用於 6 應用s: Industrial Instrument Serial Port, Embedded Controller RS-232 Link, Point-of-Sale Terminal Interface, Data Acquisition Equipment, Barcode and Identification Equipment, Legacy PC Serial Adapter.
Industrial Instrument Serial Port
The ADM231LJN is well suited to a legacy RS-232 instrument interface because it combines one driver and one receiver with operation from a single 5 V rail. Its 120 kB/s maximum data rate covers common command and measurement traffic, while approximately 9 V of output swing supports conventional EIA-232-E and V.28 endpoints. The onboard DC-DC converter eliminates separate ±12 V rails, simplifying the instrument power tree. Place the charge-pump capacitors close to the IC and provide a stable ground reference to the connected equipment to minimize logic noise and communication errors.
推薦
Embedded Controller RS-232 Link
Use the ADM231LJN when an embedded controller needs to communicate with a conventional RS-232 peripheral but only has a 5 V power rail available. The single-supply architecture removes the need for a bipolar supply, while the 120 kB/s data rate is suitable for command protocols, diagnostic logs, and configuration transfers. The approximately 9 V line swing targets standard RS-232 signaling, and the 30 V receiver-input capability provides useful margin. Firmware should include baud-rate parity and framing checks because the physical interface does not validate message integrity.
推薦
Point-of-Sale Terminal Interface
The ADM231LJN can provide a compact 5 V RS-232 interface for point-of-sale equipment that communicates with a legacy printer, scanner, or customer-display terminal. Its 120 kB/s rate is more than adequate for short command packets and status exchanges, while onboard DC-DC conversion simplifies the terminal's supply design. The 16-pin PDIP format supports through-hole assembly and maintenance-friendly prototyping. Keep the driver trace away from display and audio circuitry, and verify the peripheral's ground reference because an RS-232 connection is not an isolated communication channel.
推薦
Data Acquisition Equipment
For laboratory and industrial data-acquisition equipment, the ADM231LJN supplies a straightforward 5 V-only link to a legacy instrument. The 120 kB/s capability supports continuous measurement data, configuration commands, and periodic status reporting at rates commonly used by older serial instruments. Approximately 9 V of RS-232 output swing improves compatibility with standard V.28 equipment, while the receiver's 30 V input tolerance adds protection margin. Use short, properly referenced cabling and keep charge-pump switching paths away from sensitive sensor and reference circuits.
推薦
Barcode and Identification Equipment
The ADM231LJN fits barcode scanners, identification readers, and local operator interfaces that use a legacy RS-232 host connection. The 120 kB/s rate readily handles scanner packets and short configuration messages, and the single 5 V supply reduces the required power-tree complexity. The approximately 9 V output swing addresses EIA-232-E and V.28 signaling needs without external charge-pump ICs. For cables routed near motors or switching supplies, retain the receiver-input margin and use appropriate surge and ESD protection at the connector.
推薦
Legacy PC Serial Adapter
The ADM231LJN is suitable for a legacy serial adapter built around modern 5 V electronics. It replaces the need for a separate ±12 V supply while retaining the approximately 9 V RS-232 output swing expected by older desktop peripherals. Its 120 kB/s data rate accommodates configuration and control traffic rather than high-speed continuous transfers. The 16-pin PDIP package is convenient for through-hole designs, but firmware and cabling should use compatible framing, grounding, and flow control. A DB-9 implementation must also account for connector pinout differences among equipment families.
推薦
推薦產品摘要
工程參考資料,適用於 ADM231LJN — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | ADM232LJN |
|---|---|---|
| Brand | Analog Devices | Analog Devices |
| Package | 16-pin PDIP | 16-pin PDIP - same package |
| Product Type | RS-232 driver/receiver transceiver | RS-232 driver/receiver transceiver |
| Supply Voltage | 5 V | 5 V |
| Data Rate | 120 kB/s | 120 kB/s |
| RS-232 Output Swing | 9 V | 9 V |
| Receiver Input Voltage | 30 V | 30 V |
| DC-DC Converter | Onboard | Onboard |
| Interface Compliance | EIA-232-E and V.28 | EIA-232-E and V.28 |
| ESD Protection | > 2 kV | > 2 kV |
主要差異化特點
- Single-supply RS-232 operation (對比ADM232LJN)
- Single-driver and single-receiver architecture (對比ADM232LJN)
- RS-232 line-side tolerance (對比ADM232LJN)
設計說明
Place the external charge-pump capacitors directly beside the ADM231LJN pins designated for them in the Analog Devices family data sheet. Keep each capacitor's connection loop short and provide local supply bypassing at the device. Correct placement limits charge-pump switching transients, supports stable RS-232 output swing, and reduces coupling into nearby clock, measurement, or control traces. Confirm capacitance value and polarity against the manufacturer diagram before layout release.
Do not treat the 30 V receiver-input rating as a substitute for surge protection. RS-232 cables can expose ports to external transients, particularly when equipment is connected to long outdoor or industrial wiring. Assess the installation's ESD and surge environment, add the required connector-side protection, and maintain a common ground reference between communicating systems. Also verify that the remote equipment uses RS-232 rather than TTL, RS-422, RS-485, or another incompatible interface.
Route the RS-232 driver outputs away from sensitive analog inputs and low-level digital signals, and keep the charge-pump section away from reference and sensor circuitry. The ADM231LJN can operate at up to 120 kB/s, so edge rates can be faster than the nominal data rate. Maintain practical return paths and avoid unnecessary stubs. A single, stable ground reference is required because the RS-232 voltage levels are referenced to the interface ground rather than being isolated.
合規資訊
The EIA-232-E and V.28 interface specifications and greater-than-2-kV ESD characteristic are documented in the Analog Devices ADM231L-family data sheet. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation from current manufacturer product documentation.