MAX3221EEUE+T - 250kbps RS-232 Transceiver | Analog Devices
部品番号: MAX3221EEUE+T ✓ 生産中MAX3221EEUE+T 概要
An RS-232 transceiver is an interface IC that converts between single-ended logic-level signals and the bipolar voltage levels used by RS-232 equipment. It belongs to the interface IC hierarchy alongside UART transceivers, line drivers, and level shifters. The MAX3221EEUE+T is designed for equipment that requires one bidirectional RS-232 connection, such as configuration ports, service interfaces, point-of-sale terminals, and industrial control systems.
Key operating characteristics include a 3.0 V to 5.5 V supply range, full-duplex operation, and data rates up to 250 kbps. Its enhanced ESD protection helps the interface withstand electrostatic discharge on exposed RS-232 connections. AutoShutdown reduces the supply current to approximately 1 µA when no valid receiver signal is detected, while automatic wake-up returns the device to an active state when a valid signal appears.
The MAX3221E/MAX3223E/MAX3243E family supports EIA/TIA-232 and V.28/V.24 communication interfaces. The MAX3221EEUE+T combines one driver and one receiver in a compact 16-pin TSSOP, making it suitable for space-constrained designs that require a single RS-232 port. Its 250 kbps capability supports faster service and data links than conventional low-speed RS-232 implementations.
Typical applications include industrial controller service ports, point-of-sale and retail equipment, test systems, security consoles, and embedded control boards. The device is particularly useful when the system must operate from a 3.3 V supply while communicating with a legacy RS-232 peripheral or computer port.
PCB design should keep the RS-232 connector and protection network close to the transceiver while maintaining separation from sensitive analog or high-speed digital traces. Follow the manufacturer datasheet for external charge-pump capacitor values, receiver and transmitter connection details, and the complete 16-pin assignment before finalizing the layout.
This page combines the exact ordering information, RS-232 operating characteristics, package details, sourcing options, and application guidance needed to evaluate the MAX3221EEUE+T for a new interface design.
ドロップイン代替品: MAX3221EEUE+T — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: MAX3221EEUE+T (同一形状・フットプリント) — 相違点: Supply Voltage Range, Package, Maximum Data Rate, AutoShutdown Supply Current, ESD Protection.
MAX3221ECUE+T
✅ ドロップイン価格はお問い合わせください
データシートを見る →MAX3221EEUE+T 仕様
| Transceiver Type | 1/1 full-duplex RS-232 transceiver |
| Number of Drivers | 1 driver |
| Number of Receivers | 1 receiver |
| Supply Voltage Range | 3.0 V to 5.5 V |
| Maximum Data Rate | 250 kbps |
| ESD Protection | ±15 kV IEC ESD protection |
| AutoShutdown Supply Current | Approximately 1 µA |
| Power Management | Automatic shutdown and automatic wake-up |
| Communication Standard | EIA/TIA-232 and V.28/V.24 |
| パッケージ | 16-pin TSSOP |
| 実装タイプ | Surface mount |
MAX3221EEUE+T 16-pin tssop ピン配置ガイド
MAX3221EEUE+T (16-pin tssop パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。
詳細なピン配置データはありません: MAX3221EEUE+T.
詳細は データシート をご参照ください。
主な用途
MAX3221EEUE+T の用途: 6 件s: Industrial Controller Service Port, Point-of-Sale Terminal Interface, Embedded Security Console, Test and Measurement Equipment, Retail and Payment Peripheral, Legacy Computer Serial Adapter.
Industrial Controller Service Port
The MAX3221EEUE+T is appropriate for a single RS-232 configuration port on an industrial controller because it combines one transmitter, one receiver, and operation from 3.0 V to 5.5 V. A 3.3 V control system can use the interface without a separate 5 V supply. Its 250 kbps maximum data rate supports faster service commands than a basic low-speed serial implementation, while the 16-pin TSSOP keeps the interface compact. The automatic shutdown and wake-up functions reduce consumption when no valid receiver signal is present, making the device suitable for controllers that remain connected to legacy equipment during much of their operating cycle.
おすすめ
Point-of-Sale Terminal Interface
MAX3221EEUE+T can connect a point-of-sale terminal or peripheral that retains an RS-232 service interface. The single full-duplex channel supports simultaneous command transmission and response reception, while the 250 kbps rating accommodates rapid transaction and configuration exchanges. Because the device operates from 3.0 V to 5.5 V, it can sit directly beside modern 3.3 V logic. Automatic shutdown helps limit power use when the peripheral cable is disconnected, and the compact 16-pin TSSOP preserves board area. The ±15 kV IEC ESD rating adds useful protection for a connector exposed to user-accessible equipment.
おすすめ
Embedded Security Console
The MAX3221EEUE+T fits a security console or access-control unit that needs one wired RS-232 link for diagnostics or legacy peripheral integration. Its 1/1 full-duplex arrangement avoids allocating unused drivers and receivers, while the 16-pin TSSOP simplifies routing in compact control hardware. Operation from 3.0 V to 5.5 V supports both 3.3 V and 5 V system rails, and the 250 kbps capability is useful for transferring configuration blocks efficiently. When the attached device stops communicating, automatic shutdown reduces the transceiver's supply current to approximately 1 µA until a valid signal returns.
おすすめ
Test and Measurement Equipment
MAX3221EEUE+T is suitable for a compact test instrument that communicates with older RS-232-controlled equipment through one full-duplex port. The 250 kbps data-rate capability supports faster command and measurement-data transfers than low-speed serial links. The interface can operate directly from a 3.3 V instrument rail, reducing the need for an additional level-shifting supply domain. Automatic wake-up permits operation after the external equipment reconnects, while automatic shutdown controls consumption during idle periods. Its 16-pin TSSOP package is useful when the RS-232 function shares a crowded front-panel or motherboard layout.
おすすめ
Retail and Payment Peripheral
MAX3221EEUE+T supports a compact legacy link between a retail payment peripheral and a host controller. The one-transmitter, one-receiver arrangement is aligned with a point-to-point RS-232 connection and avoids unnecessary channel overhead. Operation from 3.0 V to 5.5 V accommodates embedded systems using either 3.3 V or 5 V logic, while the enhanced ±15 kV IEC ESD protection is valuable when the cable or connector can be touched during installation. The 250 kbps limit comfortably supports typical command traffic, and the 16-pin TSSOP leaves more PCB area for the peripheral's main digital functions.
おすすめ
Legacy Computer Serial Adapter
MAX3221EEUE+T can provide the physical RS-232 layer for a compact adapter that connects modern electronics to a legacy computer or service port. Its single bidirectional channel matches the one-port use case, and the 250 kbps capability allows substantially faster transfers than the older low-speed RS-232 implementations commonly found on legacy equipment. The broad 3.0 V to 5.5 V operating range supports modern USB-bridge and embedded-controller designs powered from either 3.3 V or 5 V. Automatic shutdown reduces idle consumption, while the small 16-pin TSSOP makes the interface practical for add-on boards with limited routing space.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MAX3221EEUE+T — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MAX3221ECUE+T |
|---|---|---|
| Package | 16-pin TSSOP | 16-pin TSSOP |
| Brand | Analog Devices | Analog Devices |
| Transceiver Configuration | 1 transmitter and 1 receiver | 1 transmitter and 1 receiver |
| Supply Voltage Range | 3.0 V to 5.5 V | 3.0 V to 5.5 V |
| Maximum Data Rate | 250 kbps | 250 kbps |
| ESD Protection | ±15 kV IEC ESD protection | ±15 kV IEC ESD protection |
| Shutdown Supply Current | Approximately 1 µA | Approximately 1 µA |
| Power Management | Automatic shutdown and automatic wake-up | Automatic shutdown and automatic wake-up |
| Communication Interface | EIA/TIA-232 and V.28/V.24 | EIA/TIA-232 and V.28/V.24 |
| Ordering Suffix | MAX3221EEUE+T | MAX3221ECUE+T |
主な差別化要因
- Compact single-channel RS-232 interface (vs MAX3221ECUE+T)
- Automatic power management (vs MAX3221ECUE+T)
- High-speed single-port operation (vs MAX3221ECUE+T)
設計ノート
Place the MAX3221EEUE+T and its charge-pump capacitors close to the RS-232 connector and device pins. Keep connector-side traces short, provide the external capacitors specified by the manufacturer datasheet, and route the protected RS-232 node away from clocks, ADC inputs, and sensitive analog signals. Maintain clearances appropriate to the connector's voltage and environmental requirements.
Design the 3.0 V to 5.5 V supply path to remain within the operating range during startup, fault conditions, and cable transitions. Account for the interface's active-state current and charge-pump demand when sizing the local supply and bypass capacitors. Automatic shutdown reduces consumption to approximately 1 µA when no valid receiver signal is detected, but the normal operating supply must still support active transmission.
Follow the manufacturer layout for the on-board charge-pump network and avoid placing unrelated traces between the IC and its capacitors. Use a solid ground reference and minimize loop area around the transmitter and receiver paths. Do not rely solely on the IC's ±15 kV IEC ESD rating as a substitute for a properly engineered connector-side protection and chassis-grounding strategy.
Confirm that the complete ordering suffix, temperature grade, package body, and lead dimensions match the PCB before releasing a design. MAX3221EEUE+T is a 16-pin TSSOP, while related MAX3221E ordering codes can use different package bodies. A nominal 16-pin count alone does not establish land-pattern compatibility, so compare the manufacturer package drawing and pin-description table.
コンプライアンス情報
The interface is not presented as an automotive-qualified device. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the manufacturer or current compliance documentation.