Texas Instruments

ADS7254IPW - 12-Bit Dual 1-MSPS SAR ADC | Texas Instruments

部品番号: ADS7254IPW ✓ 生産中
16-pin TSSOP Package
MOQ: 1 |

ADS7254IPW 概要

Texas Instruments ADS7254IPW is a 12-bit, dual-channel, simultaneous-sampling successive-approximation analog-to-digital converter operating at 1 MSPS. The device supports fully differential analog inputs and is packaged in a 16-pin TSSOP. Its two individually programmable reference sources enable system-level gain calibration, while the flexible serial interface supports communication over a wide supply range. The ADS7254IPW is designed for precision measurement systems that require synchronized acquisition from two channels.

An SAR analog-to-digital converter converts an analog input by repeatedly comparing the sampled voltage with a internally generated reference and adjusting a successive approximation. SAR ADCs occupy the ADC hierarchy alongside flash, pipeline, and delta-sigma converters. Compared with a pipeline ADC, the ADS7254IPW offers a compact dual-channel sampling architecture with simultaneous conversion, while its 12-bit resolution provides 4096 discrete codes for each input channel.

The main features include simultaneous sampling of two channels, fully differential inputs, and 1 MSPS conversion speed. Each channel includes an individually programmable reference source for calibration. The flexible serial interface allows the converter to operate across a wide power-supply range, making the device adaptable to industrial control, communications, and data-acquisition systems whose input circuitry requires precise channel-to-channel timing.

Simultaneous sampling is especially important when measuring phase, gain, or time-dependent relationships between two signals. Because both channels are sampled during the same conversion cycle, the ADS7254IPW avoids the timing offset that can occur when unrelated converters sample sequential channels. Its SAR architecture provides deterministic conversion behavior suitable for control loops and acquisition systems that require repeatable sampling, while the differential inputs support noise-controlled signal conditioning when paired with suitable drivers.

Typical uses include synchronized voltage and current measurement, motor and power-system monitoring, industrial sensor acquisition, communications equipment, and precision test and measurement instruments. The two-channel format is useful in systems that compare a sensed signal with a reference or monitor complementary quantities. Fully differential input architecture also makes the converter appropriate for balanced analog front ends where common-mode noise rejection and matched routing are important.

The primary design consideration is the analog input network. Each differential channel should use a driver and filtering arrangement that establishes the required common-mode voltage and bandwidth while preserving full-scale accuracy at 1 MSPS. Keep the two analog channels geometrically similar to minimize timing and gain differences, and follow the pin-description table in the manufacturer datasheet when assigning PCB signal and return paths.

This page combines the TI product description, family-level pin compatibility information, package details, structured alternatives, and practical application guidance. It also distinguishes verified family replacements from packaging-only orderable variants, helping engineers evaluate PCB reuse without confusing electrical compatibility with mechanical similarity.

ドロップイン代替品: ADS7254IPW — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: ADS7254IPW (同一形状・フットプリント) — 相違点: Resolution.

Texas Instruments
Resolution: 14 bit
比較対象 ADS7254IPW →

ADS7854IPW

✅ ドロップイン ⚠️ 仕様未検証
Texas Instruments
📦 16-TSSOP
Successive-approximation register (SAR) ADC · 14 bit · 1 MSPS per channel · 2 channels · Fully differential · Simultaneous sampling · Dual SAR ADC · 2 individually programmable reference sources

価格はお問い合わせください

データシートを見る →

ADS8354IPW

✅ ドロップイン ⚠️ 仕様未検証
📦 16-TSSOP
Resolution is 16 bit versus 12 bit on ADS7254IPW, while the listed maximum sampling rate decreases from 1 MSPS to 700 kSPS.

📋 参考代替品(カタログ未掲載)

ADS7254IPW 最大定格&電気的特性

ADC Type Successive-approximation register (SAR) ADC
分解能 12 bit
Conversion Rate 1 MSPS
Number of Channels 2 channels
Sampling Type Simultaneous sampling
Input Type Fully differential
Number of Input Pairs 2 differential input pairs
Programmable References 2 individually programmable reference sources
Serial Interface Flexible serial interface
パッケージ 16-pin TSSOP
実装タイプ Surface mount
RoHS ステータス Compliant
Lead-Free Status Lead-free

ADS7254IPW 16-pin tssop ピン配置ガイド

ADS7254IPW (16-pin tssop パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。

ADS7254IPW の 16-pin tssop パッケージピン配置図

詳細なピン配置データはありません: ADS7254IPW.

詳細は データシート をご参照ください。

主な用途

ADS7254IPW の用途: 6 件s: Synchronized Voltage and Current Measurement, Industrial Sensor Acquisition, Motor Drive Feedback and Control, Communications and Baseband Signal Capture, Precision Test and Measurement, Power-System Monitoring.

⚡

Synchronized Voltage and Current Measurement

The ADS7254IPW is well suited to measuring a voltage signal and a current-derived signal at the same time because its two channels use a simultaneous-sampling architecture. At 1 MSPS, the converter can acquire up to one million 12-bit samples per second, giving a 12-bit measurement 4096 possible code levels. Place the two differential front ends symmetrically and use matched filtering where gain and timing matching are important. This arrangement reduces the channel skew that could otherwise corrupt calculated power, phase, or impedance because both analog values are captured during the same conversion sequence rather than by independently timed converters.

🏭

Industrial Sensor Acquisition

The ADS7254IPW can acquire two conditioned sensor outputs in industrial monitoring systems where compactness and synchronized sampling are important. Its fully differential inputs allow each sensor signal to be paired with a return or reference signal, helping the analog front end reject common-mode disturbances when the circuit is implemented correctly. The 12-bit resolution and 1 MSPS conversion capability provide a practical balance for process variables, position feedback, and equipment diagnostics. Keep the two input channels electrically similar, provide stable reference sources, and route sensitive analog signals away from digital clocks and switching power nodes to preserve measurement quality.

🚗

Motor Drive Feedback and Control

ADS7254IPW is appropriate for motor-control systems that need to monitor two related feedback quantities at a common instant. The simultaneous 1 MSPS conversion operation can capture current and voltage feedback without introducing the larger timing uncertainty associated with sequential sampling. Fully differential inputs fit current-shunt amplifiers and voltage-sense front ends that present balanced signals. Because the converter provides 12-bit resolution, designers should verify that quantization noise and analog-front-end gain remain acceptable over the control bandwidth. Place the ADC inputs close to the controlled signal sources and separate them from gate-drive and power-stage return currents.

🌐

Communications and Baseband Signal Capture

ADS7254IPW can serve as a dual-channel data-conversion element in communications equipment requiring deterministic, synchronized sampling. Two fully differential input paths support balanced receiver outputs, while the flexible serial interface allows the digital connection to operate over a wide power-supply range. At 1 MSPS and 12 bits, the device is suitable for envelope, power, or intermediate-frequency monitoring where fine resolution is not essential. Signal integrity depends on controlled input bandwidth, low-jitter clocking, and a quiet reference arrangement, so anti-alias filtering and return-path discipline remain necessary even though the converter uses a simultaneous dual-channel architecture.

🔧

Precision Test and Measurement

ADS7254IPW is useful in test equipment that compares two analog quantities, such as a measured node against a reference or a differential signal across a sensing element. Simultaneous sampling at 1 MSPS makes the dual 12-bit converter appropriate for repetitive measurements in which channel timing must remain repeatable. The two individually programmable references can support system-level gain calibration, while fully differential inputs encourage a balanced and noise-resistant measurement chain. To achieve useful precision, select amplifier and filter components for the target bandwidth, observe the manufacturer input and reference limits, and include calibration in the measurement procedure rather than relying on resolution alone.

🔋

Power-System Monitoring

The ADS7254IPW can monitor two power-system signals when the system requires coordinated rather than sequential observations. For example, one differential channel can measure a scaled voltage and another can monitor a scaled current or power-rail condition, with both sampled at 1 MSPS. The simultaneous architecture improves timing correlation for control and diagnostics. Its fully differential input architecture is compatible with balanced sensing networks, but input amplitude, common-mode range, and reference limits must remain within the manufacturer specifications. Keep the high-voltage or high-current sensing network isolated from the converter and use matched analog paths to minimize channel gain differences.

What is the ADS7254IPW?
The ADS7254IPW is a 12-bit, dual-channel, simultaneous-sampling SAR analog-to-digital converter capable of 1 MSPS conversion. It supports fully differential inputs, two individually programmable reference sources, and a flexible serial interface in a 16-pin TSSOP package. According to the TI ADS7254 product page and ADSxx54 datasheet, Rev. B, its simultaneous architecture is intended for systems that need two related analog measurements captured during the same sampling interval.
What is the conversion rate of ADS7254IPW?
The ADS7254IPW converts at 1 MSPS per channel. This rate allows each of its two channels to produce 12-bit results at up to one million samples per second. According to the TI ADS7254 product page, both channels operate as simultaneous-sampling inputs, so the conversion rate should not be interpreted as one million aggregate channel conversions spread across two independently timed inputs.
Does ADS7254IPW support simultaneous sampling?
Yes, the ADS7254IPW supports simultaneous sampling of two channels. According to the TI ADSxx54 datasheet, Rev. B, both analog channels are captured during the same conversion sequence rather than being sampled by separate converters at different times. This is valuable for phase, gain, and differential measurements where channel-to-channel timing consistency affects the calculated result.
What inputs does ADS7254IPW support?
The ADS7254IPW supports two fully differential analog input channels. Each differential pair requires correct signal and return-path routing, an appropriate common-mode voltage, and an input network selected for the desired bandwidth and conversion rate. According to the TI ADS7254 product page, fully differential inputs distinguish this device from converters intended primarily for single-ended or pseudo-differential signals.
Where can I download the ADS7254IPW datasheet PDF?
The ADS7254IPW datasheet is available from the Texas Instruments ADS7254 product page and the linked ADSxx54 datasheet, Rev. B. The official product page provides the electrical characteristics, pin descriptions, typical application information, ordering details, and family relationships for the ADS7254IPW. Use the TI-hosted document rather than a third-party mirror when establishing the authoritative revision and device limits.
Where can I find the ADS7254IPW pinout?
The ADS7254IPW pinout is located in the pin-configuration section of the ADSxx54 datasheet, Rev. B, and corresponds to the 16-pin TSSOP package. Use that table to identify power, ground, analog inputs, reference connections, control signals, and serial data pins before laying out the PCB. The 16-terminal package requires numbered connections on both sides of the device.
What is the best drop-in replacement for ADS7254IPW?
The ADS7854IPW is the closest verified same-family drop-in option because TI describes the ADS8354, ADS7854, and ADS7254 as pin-compatible dual high-speed simultaneous-sampling converters. The principal difference is resolution: ADS7254IPW provides 12-bit conversion, ADS7854IPW provides 14-bit conversion, and ADS8354IPW provides 16-bit conversion. Confirm power, reference, interface, and timing requirements before substitution.
Can ADS7854IPW replace ADS7254IPW?
ADS7854IPW can serve as a pin-compatible replacement in the same 16-pin TSSOP ADSxx54 family because both devices are dual, high-speed, simultaneous-sampling ADCs with fully differential inputs. The measurable difference is resolution: ADS7254IPW is 12-bit, while ADS7854IPW is 14-bit. Both are listed at 1 MSPS, making the replacement suitable when increased code resolution is acceptable.
Can ADS8354IPW replace ADS7254IPW?
ADS8354IPW is pin-compatible with ADS7254IPW within the TI ADSxx54 family, but its conversion specification differs: ADS8354IPW provides 16-bit resolution at 700 kSPS, while ADS7254IPW provides 12-bit resolution at 1 MSPS. The ADS8354 therefore adds resolution but reduces the maximum sampling rate by 300 kSPS. Verify acquisition timing and interface timing before using it as a drop-in substitute.
ADS7254IPW vs ADS7854IPW - which is better for precision acquisition?
ADS7854IPW is preferable when a design can use 14-bit resolution while retaining a 1 MSPS conversion rate. ADS7254IPW provides 12-bit resolution at 1 MSPS and may be sufficient when lower conversion cost or simpler processing is advantageous. TI describes both as pin-compatible members of the same dual, simultaneous-sampling ADSxx54 family, so the decision primarily depends on required code width and system calibration.
When should I choose ADS7254IPW over a higher-resolution ADSxx54 device?
Choose ADS7254IPW when 12-bit resolution and a 1 MSPS conversion rate are sufficient, particularly for synchronized two-channel measurements that do not require the additional resolution of the 14-bit ADS7854IPW or 16-bit ADS8354IPW. It is also appropriate when firmware, signal bandwidth, or system cost favors a lower-resolution converter. Confirm that the resulting quantization and noise performance still meet the measurement specification.
Is ADS7254IPW suitable for simultaneous voltage and current measurement?
Yes, ADS7254IPW is suitable for synchronized voltage and current measurement because it converts two fully differential channels simultaneously at 1 MSPS. Its 12-bit resolution provides 4096 code levels for each channel, while simultaneous capture limits the timing mismatch between the voltage and current measurements. The analog front end must still provide signal conditioning, appropriate common-mode voltage, and safe current-sense input levels.
How should power and decoupling be handled for ADS7254IPW?
Decouple the analog and digital supply pins locally with the capacitance and placement specified in the ADSxx54 datasheet, Rev. B. Keep high-current return paths away from sensitive analog inputs and separate noisy digital return current from the reference and input network. Because exact supply limits and recommended capacitor values are not stated in the product summary, consult the manufacturer datasheet before finalizing the power tree.
Is ADS7254IPW compliant with RoHS and is it lead-free?
The ADS7254IPW is identified as RoHS-compliant, lead-free, and green in its component listing. According to that listing, the device is RoHS-compliant and lead-free. REACH, AEC-Q100, halogen-free status, and conflict-minerals status are not stated for the exact orderable part, so those attributes should be confirmed with the manufacturer before using them as qualification requirements.
What is the lifecycle status of ADS7254IPW?
Texas Instruments lists ADS7254IPW as an active orderable part with a dedicated product and part-details page. The active listing indicates that the device remains part of the current ADS7254 family rather than being designated obsolete, NRND, end-of-life, or last-time-buy. Production and longevity commitments should still be reviewed for the specific orderable MPN when planning long-lived equipment.
How can I obtain a quote for ADS7254IPW?
Use the Request a Quote form on this page to request current ADS7254IPW pricing, stock status, minimum order quantity, and lead time. The form provides the appropriate commercial channel for an exact 16-pin TSSOP orderable MPN without relying on static price information. Include your required quantity, target date, and shipment destination so the quote can reflect the correct procurement terms.

エンジニアリング参考データ: ADS7254IPW — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose ADS7254IPW when the design needs two synchronized, fully differential measurements at 1 MSPS and 12-bit resolution is sufficient. It is a practical choice for current-and-voltage feedback, paired sensor acquisition, communications monitoring, and power-system instrumentation where simultaneous capture is more important than maximum resolution. Choose ADS7854IPW when the same pin-compatible family architecture and 1 MSPS rate are needed but 14-bit data provides a meaningful measurement or calibration benefit. Choose ADS8354IPW only when 16-bit resolution justifies reducing the listed maximum conversion rate to 700 kSPS. For every option, verify the analog input range, reference arrangement, supply levels, serial timing, and acquisition requirements against the manufacturer datasheet before releasing the PCB.

代替品との比較

パラメータ この製品 ADS7854IPW ADS8354IPW
Brand Texas Instruments Texas Instruments Texas Instruments
Package 16-TSSOP 16-TSSOP 16-TSSOP
Resolution 12 bit 14 bit 16 bit
Conversion Rate 1 MSPS 1 MSPS 700 kSPS
ADC Architecture SAR ADC SAR ADC SAR ADC
Number of Channels 2 channels 2 channels 2 channels
Sampling Mode Simultaneous sampling Simultaneous sampling Simultaneous sampling
Input Type Fully differential Fully differential Fully differential
Programmable Reference Sources 2 individually programmable references 2 individually programmable references 2 individually programmable references

主な差別化要因

  • Retains the full 1 MSPS sampling rate while using a 12-bit conversion word (vs ADS8354IPW)
  • Provides the lower-resolution option in the pin-compatible ADSxx54 family (vs ADS7854IPW)
  • Combines two simultaneous channels with fully differential inputs (vs ADS8354IPW)

設計ノート

Use the pin-description table in the ADSxx54 datasheet, Rev. B, to assign all 16 TSSOP connections. Place analog decoupling and input-conditioning components close to their associated pins, keep the two differential input paths geometrically similar, and route analog returns away from digital clock and serial-data return currents. A symmetric layout reduces gain differences between the simultaneously sampled channels and limits the effect of switching noise coupled through the PCB.

Treat the ADS7254IPW as a 1 MSPS, fully differential acquisition device rather than a general-purpose low-speed ADC. Select the input amplifier and anti-alias filter for the required input bandwidth while preserving the converter's operating range, and provide a stable, low-noise reference network. The two channels should share equivalent filtering and grounding structures when accurate channel-to-channel comparison is required; otherwise, unmatched phase and gain responses can undermine the benefit of simultaneous sampling.

Do not select a replacement solely because it has a 16-pin TSSOP package. ADS7254IPW, ADS7854IPW, and ADS8354IPW are described by TI as pin-compatible, but ADS7854IPW increases resolution from 12 to 14 bits, while ADS8354IPW increases resolution to 16 bits and lowers the listed sampling rate from 1 MSPS to 700 kSPS. Also verify power, reference, interface timing, and analog common-mode requirements before using either family member as a substitute.

コンプライアンス情報

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
鉛フリー
Yes
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The ADS7254IPW listing identifies the exact MPN as RoHS-compliant, lead-free, and green. No exact-part REACH, AEC-Q100, halogen-free, or conflict-minerals declaration was identified.

データ検証日: 2026-11-18 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

ADS7254IPW ADS7254IPW datasheet ADS7254IPW pinout ADS7254IPW datasheet pdf ADS7254IPW equivalent ADS7254IPW replacement ADS7254IPW price ADS7254IPW stock Texas Instruments ADS7254IPW ADS7254IPW vs ADS7854IPW ADS7254IPW vs ADS8354IPW ADS7254IPW 16-TSSOP pinout ADS7254IPW dual differential ADC ADS7254IPW application circuit

関連部品&用語

Texas Instruments ADS7254IPW ADS7254 ADS7854IPW ADS8354IPW ADSxx54 SAR ADC successive-approximation register analog-to-digital converter data converter IC semiconductor fully differential input simultaneous sampling 12-bit resolution 1 MSPS programmable reference flexible serial interface 16-TSSOP TSSOP family surface-mount package industrial sensor acquisition motor-control feedback power-system monitoring RoHS lead-free
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示