ADS8329IPW - 16-Bit 1-MSPS SAR ADC | Texas Instruments
部品番号: ADS8329IPW ✓ 生産中ADS8329IPW 概要
An ADC is an interface IC that converts an analog voltage into a digital code for processing by a microcontroller, DSP, FPGA, or other digital controller. The ADS8329 belongs to the successive-approximation, or SAR, ADC family. SAR ADCs use a capacitor-based internal sampling network and compare the sampled input against an internal reference, producing a deterministic conversion result without the complexity of a pipeline converter. This makes the ADS8329 suitable for industrial measurement, data acquisition, and precision control systems.
Key features include 16-bit resolution, a 1-MSPS conversion rate, a 2.7 V to 5.5 V analog supply range, and a single unipolar analog input. The capacitor-based SAR core includes an inherent sample-and-hold function. A high-speed, wide-voltage serial interface allows the converter to communicate efficiently with digital control logic while limiting PCB pin count and signal-routing complexity compared with a parallel ADC.
The ADS8329 is optimized for low-power operation and unipolar input measurement. Because the converter is based on a SAR architecture, it can complete successive comparison cycles at 1 MSPS while providing the accuracy and linearity expected from a 16-bit converter. The serial interface is especially useful when the ADC is located near an analog sensor and the resulting digital data must be transferred over a limited number of PCB traces.
Typical applications include industrial process monitoring, portable instrumentation, sensor-interface modules, test and measurement equipment, and embedded control systems. The unipolar input arrangement is well suited to sensors whose output remains between ground and the positive analog supply range. Systems requiring two analog channels may evaluate the ADS8330, which uses the same converter core and adds a two-to-one input multiplexer, although board compatibility should be confirmed from the device pinouts before substitution.
For reliable operation, the analog and digital sections should be laid out according to the manufacturer datasheet, with clean reference connections, short return paths, and adequate bypassing near the supply pins. The serial interface timing, conversion trigger sequence, input range, and reference configuration must also be implemented exactly as described in the datasheet. These measures are particularly important because reference and layout errors can consume more of the available measurement accuracy than the nominal ADC resolution.
This product page brings together the converter's principal operating parameters, package information, practical application guidance, selection criteria, and a qualified comparison framework. It also distinguishes the direct ADS8329 configuration from the multiplexed ADS8330 so engineers can assess channel requirements, interface behavior, and PCB compatibility before finalizing a design.
ドロップイン代替品: ADS8329IPW — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
この製品に利用可能なドロップイン代替品はありません。
代替品をリクエストADS8329IPW 最大定格&電気的特性
| Converter Type | Successive-approximation register (SAR) ADC |
| 分解能 | 16 bit |
| サンプリングレート | 1 MSPS |
| Analog Supply Voltage Range | 2.7 V to 5.5 V |
| Analog Input Type | Unipolar, 1 input |
| Internal Sampling Structure | Capacitor-based SAR with inherent sample-and-hold |
| Output Interface | High-speed, wide-voltage serial interface |
| パッケージ | 16-pin TSSOP |
| Terminal Count | 16 terminals |
| Temperature Grade | Industrial |
| AEC-Q100 Qualification | Not applicable |
ADS8329IPW 16-pin tssop ピン配置ガイド
ADS8329IPW (16-pin tssop パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。
詳細なピン配置データはありません: ADS8329IPW.
詳細は データシート をご参照ください。
主な用途
ADS8329IPW の用途: 6 件s: Industrial Process Monitoring, Portable Sensor Interfaces, Precision Data-Acquisition Systems, Test and Measurement Equipment, Embedded Control Systems, Battery-Powered Instrumentation.
Industrial Process Monitoring
The ADS8329IPW fits single-channel process instrumentation that must resolve a unipolar sensor signal while transferring results through a compact serial interface. Its 16-bit resolution and 1-MSPS sampling rate provide a useful combination for pressure, temperature, level, and flow transmitter front ends operating from a 2.7 V to 5.5 V analog supply. Place the converter close to the sensor-conditioning network, preserve a quiet reference connection, and route the serial output away from switching regulators. The SAR architecture provides deterministic conversion timing, while the serial interface avoids a wide parallel bus that would consume additional PCB area and digital I/O.
おすすめ
Portable Sensor Interfaces
The ADS8329IPW is suitable for portable measurement modules where converter area, supply range, and serial connectivity matter. A 2.7 V minimum analog supply supports low-voltage systems, while the 1-MSPS rate can capture changing sensor values more quickly than a slow-resolution acquisition stage. The 16-bit output preserves fine detail for resistive, capacitive, or transducer-based sensors whose signals remain unipolar. Use the serial interface for a compact microcontroller or digital controller connection, and carefully separate analog return paths from switching currents to preserve the benefit of the converter's 16-bit nominal resolution.
おすすめ
Precision Data-Acquisition Systems
The ADS8329IPW can serve as the central converter in a compact, high-resolution data-acquisition module. At 16 bits and 1 MSPS, it combines detailed numerical representation with a sampling interval suitable for many laboratory and industrial waveforms. The single unipolar channel simplifies analog conditioning when one input is sufficient, and the serial interface reduces the number of traces between the converter and a controller. For best performance, follow the Texas Instruments reference and layout guidance, use short analog paths, and verify the selected input range and reference voltage against the manufacturer electrical-characteristics table.
おすすめ
Test and Measurement Equipment
The ADS8329IPW is appropriate for compact measurement instruments that acquire one unipolar analog value at a moderate speed and require a high-resolution digital result. Its 1-MSPS conversion rate supports rapid updates, while the 16-bit code width provides the numerical granularity expected from precision bench equipment. A serial readout also simplifies integration into a controller-based instrument without requiring a parallel data bus. Designers should treat the ADC reference, source impedance, input-settling network, and trigger timing as part of the signal chain, because these factors directly affect whether the 16-bit conversion result remains useful in a calibrated instrument.
おすすめ
Embedded Control Systems
The ADS8329IPW supports embedded controllers that need periodic readings from a single unipolar feedback or sensing channel. Its 1-MSPS capability permits a much faster acquisition loop than the 16-bit resolution alone would suggest, while the serial interface conserves microcontroller I/O compared with a parallel ADC. The 2.7 V to 5.5 V supply range provides flexibility across compact control boards, but the complete system voltage arrangement must follow the datasheet. Firmware should account for conversion latency, command timing, and the serial word format before using sampled values in a safety-sensitive or high-dynamic-range control loop.
おすすめ
Battery-Powered Instrumentation
The ADS8329IPW can be evaluated for battery-powered instrumentation that measures one unipolar sensor output and benefits from a compact, low-voltage SAR converter. Its 2.7 V minimum supply supports low-energy system architectures, and the serial interface allows the converter to remain physically close to the sensor and analog-conditioning stages. Sampling at 1 MSPS provides timing flexibility, but the effective system energy should be evaluated using the datasheet power characteristics and the selected acquisition duty cycle. Analog signal conditioning, reference stability, and leakage paths may dominate battery life, so converter selection should be integrated with the complete power budget.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: ADS8329IPW — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 |
|---|---|
| Package | 16-pin TSSOP |
| Brand | Texas Instruments |
| Converter Architecture | Successive-approximation register (SAR) |
| Resolution | 16 bit |
| Sampling Rate | 1 MSPS |
| Analog Supply Voltage | 2.7 V to 5.5 V |
| Analog Input Configuration | Single unipolar input |
| Output Interface | High-speed, wide-voltage serial interface |
| Sampling Network | Capacitor-based SAR with inherent sample-and-hold |
| Temperature Grade | Industrial |
主な差別化要因
- Simpler single-channel conversion configuration (vs ADS8330)
- High-resolution sampling capability in a compact package (vs ADS8330)
- Direct single-input architecture for instrumentation (vs ADS8330)
設計ノート
Follow the Texas Instruments ADS8329 recommended layout for analog, digital, and reference connections. Place required bypass capacitors close to the associated pins, keep the analog input route short, and provide a direct return path for analog currents. If the converter is placed near a switching regulator or digital processor, route serial signals away from those high-current paths and use a quiet ground strategy that prevents converter return current from flowing through sensitive input-reference nodes.
Treat the serial clock as a controlled digital signal even though the converter uses a serial interface. Route it over a continuous return path, avoid crossing noisy power-stage nodes, and terminate the interface according to the system topology specified in the manufacturer datasheet. Pay particular attention to clock timing and data setup or hold requirements; timing violations can corrupt a conversion result even when the analog input and reference are otherwise correct.
Do not assume that the ADS8330 is automatically interchangeable with the ADS8329IPW. The ADS8330 adds a two-to-one input multiplexer and programmable tag-bit behavior, so its functional and pin requirements differ even though it shares the ADS8329 converter core. Before choosing it for a replacement, compare the package drawing, terminal assignments, input selection logic, conversion timing, and serial output protocol against the specific ADS8329IPW design.
コンプライアンス情報
The exact ADS8329IPW orderable device is described as an industrial-grade, 16-pin TSSOP ADC. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not established by the retrieved manufacturer descriptions and require confirmation from the current Texas Instruments compliance documentation.