Texas Instruments

ADS7805UB - 16-Bit 100 kSPS SAR ADC | Texas Instruments

部品番号: ADS7805UB ✓ 生産中
±10 V Vdss 28-pin SOIC (DW) Package
MOQ: 1 |

ADS7805UB 概要

The Texas Instruments ADS7805UB is a 16-bit, single-channel, 100 kSPS sampling CMOS analog-to-digital converter with a successive approximation register (SAR) architecture, 10 us conversion time, and parallel microprocessor interface. It is packaged in a 28-pin SOIC (DW) package and accepts a ±10 V input range through an integrated sample-and-hold stage. The converter also includes an internal reference, clock, 3-state output drivers, and complete conversion and acquisition logic.

An ADC is a signal-conditioning and digitization component that converts a continuous analog voltage into a digital value suitable for processing, measurement, control, or storage. The ADS7805 belongs to the SAR ADC family, where an internal capacitor array and successive comparison cycle resolve the input voltage. Compared with flash and pipeline ADC architectures, this SAR approach is well suited to precision industrial measurement, instrumentation, and data-acquisition systems where accuracy, interface simplicity, and deterministic conversion timing matter.

The ADS7805UB combines a 16-bit resolution with a minimum sampling rate of 100 kSPS and 86 dB minimum SINAD with a 20 kHz input frequency, according to the manufacturer datasheet. Its ±10 V input range supports direct acquisition of bipolar sensor signals in industrial environments. The parallel interface provides separate digital output lines for direct connection to a microprocessor, FPGA, or other parallel bus controller. An internal reference and clock simplify system design by reducing the number of external timing and calibration components.

The device is designed around a complete CMOS sampling ADC structure containing a sample-and-hold circuit, reference, clock, microprocessor interface, and tri-state output drivers. The 28-pin SOIC package is intended for through-hole assembly and conventional PCB routing. Because the converter is not a switching regulator, its power and thermal design requirements are modest, although correct grounding, reference bypassing, analog input routing, and digital-bus timing remain essential for achieving the specified accuracy.

Typical applications include industrial process control, precision instrumentation, data-acquisition modules, sensor-interface boards, laboratory measurement equipment, and embedded industrial controllers. The ADS7805UB is particularly useful when a design needs bipolar measurement, 16-bit resolution, and a deterministic parallel conversion interface without the complexity of a high-speed pipeline ADC.

When laying out the PCB, keep the analog input trace short, provide a solid ground plane, and decouple the supply pins close to the device. Confirm the acquisition timing and output-bus loading against the host processor requirements before beginning system integration. This page combines the manufacturer specifications with practical selection guidance, package information, and verified source links for design review and sourcing.

ドロップイン代替品: ADS7805UB — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: ADS7805UB (同一形状・フットプリント) — 相違点: Architecture, Mounting Type, Package, Reference, Resolution.

Texas Instruments
Architecture: Successive Approximation Register (SAR), capacitor-based
Mounting Type: Through-hole (THT)
Package: 28-pin PDIP, through-hole
比較対象 ADS7805UB →
Texas Instruments
Architecture: SAR (Successive Approximation Register)
Mounting Type: Surface Mount
Package: 28-SOIC (DW) 0.295 inch, 7.50 mm width
比較対象 ADS7805UB →

ADS7805UBE4

✅ ドロップイン
📦 28-pin SOIC (DW)
Same ADS7805 family and 28-pin SOIC package; suffix-specific electrical or qualification details require confirmation

📋 参考代替品(カタログ未掲載)

ADS7825U/1K

✅ ドロップイン
📦 28-pin SOIC
Related 16-bit SAR ADC in a 28-pin SOIC package, but input, timing, and pin-mapping differences require verification

📋 参考代替品(カタログ未掲載)

ADS7830IPWR

✅ ドロップイン
📦 28-pin SOIC
Related 16-bit SAR ADC with a 28-pin SOIC package; resolution, throughput, input range, and pinout differences require verification

📋 参考代替品(カタログ未掲載)

ADS7805UB 最大定格&電気的特性

ADC Type Successive Approximation Register (SAR)
分解能 16 bit
Number of Input Channels 1 channel
サンプリングレート 100 kSPS minimum
Conversion Time 10 us
入力電圧範囲 ±10 V
SINAD 86 dB minimum with 20 kHz input
インターフェース Parallel microprocessor interface
Architecture CMOS sampling ADC
Internal Functions Sample-and-hold, reference, clock, interface, 3-state output drivers
パッケージ 28-pin SOIC (DW)
実装タイプ Through-hole
Input Type Bipolar, ±10 V
出力タイプ 3-state parallel digital output
Reference Internal reference

ADS7805UB 28-pin soic (dw) ピン配置ガイド

ADS7805UB (28-pin soic (dw) パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。

ADS7805UB の 28-pin soic (dw) パッケージピン配置図

詳細なピン配置データはありません: ADS7805UB.

詳細は データシート をご参照ください。

主な用途

ADS7805UB の用途: 6 件s: Industrial Process Measurement, Precision Data Acquisition, Laboratory Instrumentation, Sensor Interface Modules, Embedded Control Systems, Power and Energy Monitoring.

🏭

Industrial Process Measurement

The ADS7805UB fits industrial process-measurement channels that need higher resolution than a basic 8-bit or 12-bit converter while retaining a straightforward parallel data path. Its 16-bit resolution, ±10 V bipolar input range, and 10 us conversion time allow a controller to acquire pressure, temperature, position, or process-current signals without a complex high-speed interface. The 100 kSPS minimum sampling rate also supports rapid supervisory updates. Use a protected analog front end for field wiring, keep the input path short, and verify grounding and isolation requirements before connecting industrial sensors.

📊

Precision Data Acquisition

For precision data-acquisition systems, the ADS7805UB combines 16-bit resolution with a 10 us conversion time and a parallel microprocessor interface. The architecture is appropriate when samples must be transferred directly into a digital bus without the latency and control overhead associated with a serial converter. Its documented 86 dB minimum SINAD with a 20 kHz input provides a useful basis for front-end and anti-alias design. Board planners should use a solid ground plane, short analog traces, controlled clocking, and output timing verified against the host processor.

🔬

Laboratory Instrumentation

The ADS7805UB can serve laboratory and test-instrument front ends that digitize moderate-bandwidth bipolar signals. Its 16-bit resolution preserves fine detail in slow or precision measurements, while the 100 kSPS sampling capability provides more than enough throughput for many control and monitoring functions. A ±10 V input range can simplify connection to conditioned laboratory probes and sensor outputs. For accurate measurements, account for source impedance, settling time, reference accuracy, noise, and the acquisition interval rather than treating nominal conversion time as the complete measurement accuracy budget.

🧩

Sensor Interface Modules

The ADS7805UB is suitable for sensor-interface modules handling bipolar outputs from pressure, current, position, and industrial transducer assemblies. A ±10 V input range reduces the need for additional range conversion when the sensor already produces a bipolar voltage. The 16-bit resolution improves the representation of small signal changes, while the parallel interface allows a local controller to sample and process several channels over time. Designers should add appropriate input protection, filtering, and buffering where sensor drive impedance or overvoltage conditions could affect acquisition accuracy.

⚙️

Embedded Control Systems

Embedded industrial controllers can use the ADS7805UB as a deterministic parallel-interface ADC for supervisory control loops and supervisory data channels. Its 10 us conversion time supports timely acquisition, while the 16-bit word width suits calibration, monitoring, and setpoint feedback. The SOIC package is practical for a through-hole controller board, and the parallel bus allows direct connection to suitable microprocessor or FPGA I/O. Confirm bus direction, output enable behavior, settling requirements, and acquisition timing with the host device before releasing the schematic.

⚡

Power and Energy Monitoring

The ADS7805UB is applicable to power-monitoring and energy-control equipment that measures bipolar current or voltage signals at a supervisory sampling rate. The ±10 V range can accept appropriately scaled signals, and the 16-bit resolution improves visibility into small deviations around a nominal operating point. Because the converter itself is not a dedicated energy-monitoring front end, the system must include suitable sensing, isolation, scaling, and filtering. Validate signal bandwidth and acquisition cadence to ensure that conversion time and bus transfer do not distort the selected measurement method.

おすすめ製品の概要

What is the operating voltage of ADS7805UB?
The ADS7805UB operating voltage must be confirmed from the manufacturer's datasheet for the specific supply configuration and operating conditions. The verified product information identifies the device as a 16-bit, 10 us sampling CMOS ADC in a 28-pin SOIC package, but it does not state a numeric supply range. Use the manufacturer datasheet at the official product link before designing the power tree or selecting bypass capacitors. Request the current technical details through the Request a Quote form on this page if a supply specification is needed for sourcing review.
What are the key specifications of ADS7805UB that engineers should know?
The ADS7805UB is a 16-bit, single-channel SAR ADC with a minimum sampling rate of 100 kSPS, 10 us conversion time, and a ±10 V bipolar input range. According to the Texas Instruments datasheet, the converter provides 86 dB minimum SINAD with a 20 kHz input and includes an integrated sample-and-hold stage, reference, clock, parallel microprocessor interface, and 3-state output drivers. It is offered in a 28-pin SOIC (DW) package.
Where can I download the ADS7805UB datasheet PDF?
The official manufacturer datasheet is available through the Texas Instruments ADS7805 product page at https://www.ti.com/lit/gpn/ads7805. The product page identifies the document as the ADS7805 datasheet, revision D, and describes the device as a 16-bit, 10 us sampling CMOS analog-to-digital converter. Use the manufacturer PDF for the electrical characteristics, pin descriptions, timing diagrams, application information, and package drawings.
Where can I find the ADS7805UB pinout?
The ADS7805UB pinout is defined in the pin-description and terminal-configuration sections of the manufacturer ADS7805 datasheet at https://www.ti.com/lit/gpn/ads7805. The device uses a 28-pin SOIC (DW) package. Assign PCB nets from the datasheet pin table rather than relying on a generic SOIC drawing, because the analog input, reference, supply, control, and parallel data signals have device-specific functions.
What is the difference between ADS7805UB and ADS7805P?
The ADS7805UB and ADS7805P belong to the same ADS7805 family, but the verified comparison information identifies different package mounting options: ADS7805UB is associated with the 28-pin SOIC package, while ADS7805P is associated with a through-hole PDIP-28 package. They therefore are not package-identical drop-in replacements for an existing PCB. Verify the exact package, pin arrangement, and electrical requirements before substituting one for the other.
Can ADS7805UBE4 replace ADS7805UB?
ADS7805UBE4 is the closest identified same-brand alternative because it is associated with the same ADS7805 device family and a 28-pin SOIC package. Before using it as a drop-in replacement, confirm that the suffix does not change the electrical grade, temperature range, qualification, marking, or ordering configuration. The verified material does not provide a complete manufacturer cross-reference table for this suffix, so compatibility should be checked against the ADS7805 datasheet and the approved-part requirements for the design.
What is the best drop-in replacement for ADS7805UB?
ADS7805UBE4 is the most defensible identified drop-in candidate for ADS7805UB because it is the same Texas Instruments ADS7805 family and is associated with the same 28-pin SOIC package. No equally verified cross-brand, pin-to-pin replacement was identified in the supplied replacement search. For production use, verify the suffix-specific electrical specifications and qualification requirements against the manufacturer datasheet rather than treating family-level similarity as sufficient evidence.
Is ADS7805UB suitable for industrial sensor acquisition?
Yes, ADS7805UB is suitable for many industrial sensor-acquisition applications because it combines a 16-bit resolution, 100 kSPS minimum sampling rate, 10 us conversion time, and a bipolar ±10 V input range. These characteristics fit process-control signals and instrumentation channels that require more dynamic range than an 8-bit or 12-bit converter. Confirm the selected front-end, isolation, reference stability, and electrical limits for the specific sensor and operating environment.
ADS7805UB vs ADS7825U/1K - which is better for bipolar measurement?
ADS7805UB is the more directly documented choice for a 16-bit, 10 us SAR ADC with a ±10 V bipolar input range and 100 kSPS minimum sampling rate. The supplied comparison identifies ADS7825U/1K as a related ADS7825-family part, but it does not provide enough verified information to claim identical pin compatibility or equivalent performance. Choose ADS7805UB when its documented range, timing, and 28-pin SOIC interface match the design; verify ADS7825U/1K against a detailed cross-reference before substitution.
What is the best Analog Devices equivalent for ADS7805UB?
The verified replacement search mentions that Analog Devices is among the manufacturers represented in ADS7805 cross-reference results, but it does not identify a specific Analog Devices MPN with enough evidence to confirm the same 28-pin SOIC footprint, pin mapping, and electrical performance. A candidate should therefore not be presented as a confirmed drop-in equivalent. Use the Request a Quote form to request a component review, or validate a specific candidate against the ADS7805UB pinout, input range, resolution, sampling rate, and interface requirements.
How much power does ADS7805UB consume?
The numerical ADS7805UB power-consumption value is not stated in the verified product material. According to the Texas Instruments product information, the converter is a CMOS 16-bit SAR ADC with a 10 us conversion time and integrated reference, clock, and parallel interface. Determine the appropriate supply and dissipation budget from the manufacturer datasheet for the selected operating voltage and sampling conditions, especially when designing compact industrial or embedded measurement equipment.
Where to buy ADS7805UB online?
The ADS7805UB is available from the Texas Instruments product page and is also listed by major component distributors. For a current quote, use the Request a Quote form on this page and provide the exact MPN, quantity, target package, and required delivery information. The current commercial terms should be confirmed directly through that form because availability, lot allocation, and lead time can change by region and order quantity.
What is the price of ADS7805UB?
The current ADS7805UB price is best obtained through the Request a Quote form on this page because commercial pricing depends on quantity, package configuration, order volume, and current supply. No static price should be used for budgeting because quoted prices change with market conditions and order parameters. Submit the exact MPN, required quantity, and delivery location through the form for a current response.
What is the lead time for ADS7805UB?
The current lead time for ADS7805UB should be requested through the Request a Quote form on this page. The verified listings confirm the exact part and its 28-pin SOIC configuration, but they do not provide a stable, order-specific manufacturing lead time. Include the required quantity, shipment destination, and whether multiple shipment dates are acceptable so the commercial response can reflect the actual supply position.
Is ADS7805UB in stock?
Stock status changes by distributor, quantity, package suffix, and region, so the current quantity should be confirmed through the Request a Quote form on this page. The exact manufacturer MPN ADS7805UB is listed in the verified product and distributor results, including the 28-pin SOIC configuration. Submit the required quantity and packaging details to obtain a current availability response rather than relying on a potentially outdated stock indication.
When should I choose ADS7805UB over another 16-bit SAR ADC?
Choose ADS7805UB when the design specifically benefits from a documented 16-bit SAR architecture, 100 kSPS minimum sampling rate, 10 us conversion time, ±10 V bipolar input range, and parallel microprocessor interface in a 28-pin SOIC package. It is particularly appropriate for industrial process measurement and instrumentation where direct bipolar acquisition and deterministic parallel timing are priorities. Select another candidate only after confirming its footprint, pinout, reference behavior, supply requirements, and acquisition timing against the system design.

エンジニアリング参考データ: ADS7805UB — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose ADS7805UB when the design requires a documented 16-bit SAR ADC, a ±10 V bipolar input range, 100 kSPS minimum sampling, 10 us conversion timing, and a parallel microprocessor interface in a 28-pin SOIC package. It is well aligned with industrial process measurement, laboratory instrumentation, sensor interfaces, and embedded supervisory control. Consider ADS7805UBE4 first when alternate sourcing within the same family and package is needed, but verify its suffix-specific electrical and qualification requirements. Evaluate ADS7825U/1K or ADS7830IPWR only after reviewing their complete pinouts and electrical tables; family-level similarity does not prove drop-in compatibility. For designs using a serial interface, a lower-cost converter, a different input range, or a smaller package, a different device may be more appropriate. Confirm supply, acquisition timing, reference behavior, output timing, and environmental requirements against the manufacturer datasheet before releasing the PCB.

代替品との比較

パラメータ この製品 ADS7805UBE4 ADS7825U/1K ADS7830IPWR
Package 28-pin SOIC (DW) 28-pin SOIC (DW) 28-pin SOIC 28-pin SOIC
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Resolution 16 bit 16 bit 16 bit 16 bit
ADC Architecture SAR SAR SAR SAR

主な差別化要因

  • Directly documented bipolar 16-bit conversion (vs ADS7825U/1K)
  • Known 10 us conversion timing for deterministic acquisition (vs ADS7830IPWR)
  • Simplified parallel data acquisition (vs ADS7825U/1K)
  • Closest identified same-family sourcing path (vs ADS7825U/1K)

設計ノート

Route the analog input as a short, controlled-impedance trace over a continuous ground plane and keep switching-node or digital-clock traces away from the input. Place input and reference bypass components close to their associated pins, and follow the exact pin table and layout recommendations in the manufacturer datasheet. Because the ADS7805UB uses a parallel output bus, separate analog input routing from the 16-bit digital output region to reduce coupling into the sampling capacitor.

Treat the 10 us conversion time as the converter's conversion interval, not as a guarantee that the sampled value is immediately usable without considering acquisition, settling, and bus timing. Confirm the source impedance, sample-and-hold acquisition window, conversion signal, output-valid behavior, and host read timing in the datasheet. The 16-bit parallel bus also increases switching activity, so keep the output traces short where practical and confirm the host input capacitance and signal-integrity margin.

Do not substitute a family member solely because it has the same resolution or a similar package name. ADS7805UBE4 is the closest identified same-family option, while ADS7825U/1K and ADS7830IPWR require verification of pin mapping and electrical behavior. Check the exact ordering suffix, package, operating-temperature grade, qualification, acquisition timing, input range, and interface timing before approving a replacement.

Build the supply network from the datasheet's recommended capacitor values and placement. Keep the regulator output path and ground return compact, and avoid sharing high-current return paths with sensitive analog measurement nodes. The verified product snippets do not provide a numeric operating-voltage range or power-consumption value, so those limits should be taken directly from the manufacturer datasheet before defining the power tree, thermal budget, or bypass-capacitor rating.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The verified product listings identify the manufacturer, device type, package, resolution, conversion time, input range, and sampling characteristics, but they do not provide explicit compliance statements for the exact ADS7805UB ordering suffix.

関連検索

ADS7805UB datasheet ADS7805UB datasheet pdf ADS7805UB pinout ADS7805UB specifications ADS7805UB 28-SOIC Texas Instruments ADS7805UB ADS7805UB price ADS7805UB stock ADS7805UB equivalent ADS7805UB replacement ADS7805UB vs ADS7825U/1K ADS7805UB application circuit ADS7805UB 16-bit ADC ADS7805UB ±10V input ADS7805UB 100 kSPS

関連部品&用語

Texas Instruments ADS7805UB ADS7805UBE4 ADS7825U/1K ADS7830IPWR analog-to-digital converter ADC successive approximation register SAR ADC sampling ADC CMOS ADC 16-bit resolution 100 kSPS 10 us conversion time ±10 V input range 86 dB SINAD parallel microprocessor interface sample-and-hold internal reference internal clock 3-state output drivers 28-pin SOIC DW package industrial process measurement precision instrumentation
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示