ADS7805UB - 16-Bit 100 kSPS SAR ADC | Texas Instruments
MPN: ADS7805UB ✓ Hoạt độngADS7805UB Tóm tắt
An ADC is a signal-conditioning and digitization component that converts a continuous analog voltage into a digital value suitable for processing, measurement, control, or storage. The ADS7805 belongs to the SAR ADC family, where an internal capacitor array and successive comparison cycle resolve the input voltage. Compared with flash and pipeline ADC architectures, this SAR approach is well suited to precision industrial measurement, instrumentation, and data-acquisition systems where accuracy, interface simplicity, and deterministic conversion timing matter.
The ADS7805UB combines a 16-bit resolution with a minimum sampling rate of 100 kSPS and 86 dB minimum SINAD with a 20 kHz input frequency, according to the manufacturer datasheet. Its ±10 V input range supports direct acquisition of bipolar sensor signals in industrial environments. The parallel interface provides separate digital output lines for direct connection to a microprocessor, FPGA, or other parallel bus controller. An internal reference and clock simplify system design by reducing the number of external timing and calibration components.
The device is designed around a complete CMOS sampling ADC structure containing a sample-and-hold circuit, reference, clock, microprocessor interface, and tri-state output drivers. The 28-pin SOIC package is intended for through-hole assembly and conventional PCB routing. Because the converter is not a switching regulator, its power and thermal design requirements are modest, although correct grounding, reference bypassing, analog input routing, and digital-bus timing remain essential for achieving the specified accuracy.
Typical applications include industrial process control, precision instrumentation, data-acquisition modules, sensor-interface boards, laboratory measurement equipment, and embedded industrial controllers. The ADS7805UB is particularly useful when a design needs bipolar measurement, 16-bit resolution, and a deterministic parallel conversion interface without the complexity of a high-speed pipeline ADC.
When laying out the PCB, keep the analog input trace short, provide a solid ground plane, and decouple the supply pins close to the device. Confirm the acquisition timing and output-bus loading against the host processor requirements before beginning system integration. This page combines the manufacturer specifications with practical selection guidance, package information, and verified source links for design review and sourcing.
Bộ thay thế dễ dàng lắp đặt cho ADS7805UB — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với ADS7805UB (cùng hình factor và footprint) — khác nhau ở Architecture, Mounting Type, Package, Reference, Resolution.
ADS7805UBE4
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
ADS7825U/1K
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
ADS7830IPWR
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
ADS7805UB Tỷ lệ tối đa & tính chất điện
| ADC Type | Successive Approximation Register (SAR) |
| Độ phân giải | 16 bit |
| Number of Input Channels | 1 channel |
| Tỷ lệ lấy mẫu | 100 kSPS minimum |
| Conversion Time | 10 us |
| Phạm vi điện áp đầu vào | ±10 V |
| SINAD | 86 dB minimum with 20 kHz input |
| Giao diện | Parallel microprocessor interface |
| Architecture | CMOS sampling ADC |
| Internal Functions | Sample-and-hold, reference, clock, interface, 3-state output drivers |
| Hộp | 28-pin SOIC (DW) |
| Kiểu lắp đặt | Through-hole |
| Input Type | Bipolar, ±10 V |
| Kiểu đầu ra | 3-state parallel digital output |
| Reference | Internal reference |
Hướng dẫn cấu hình chân ADS7805UB 28-pin soic (dw)
Cấu hình chân cho ADS7805UB (28-pin soic (dw) gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.
Không có dữ liệu chân cụ thể sẵn có cho ADS7805UB.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
ADS7805UB phù hợp cho 6 Áp dụngs: Industrial Process Measurement, Precision Data Acquisition, Laboratory Instrumentation, Sensor Interface Modules, Embedded Control Systems, Power and Energy Monitoring.
Industrial Process Measurement
The ADS7805UB fits industrial process-measurement channels that need higher resolution than a basic 8-bit or 12-bit converter while retaining a straightforward parallel data path. Its 16-bit resolution, ±10 V bipolar input range, and 10 us conversion time allow a controller to acquire pressure, temperature, position, or process-current signals without a complex high-speed interface. The 100 kSPS minimum sampling rate also supports rapid supervisory updates. Use a protected analog front end for field wiring, keep the input path short, and verify grounding and isolation requirements before connecting industrial sensors.
Được đề xuất
Precision Data Acquisition
For precision data-acquisition systems, the ADS7805UB combines 16-bit resolution with a 10 us conversion time and a parallel microprocessor interface. The architecture is appropriate when samples must be transferred directly into a digital bus without the latency and control overhead associated with a serial converter. Its documented 86 dB minimum SINAD with a 20 kHz input provides a useful basis for front-end and anti-alias design. Board planners should use a solid ground plane, short analog traces, controlled clocking, and output timing verified against the host processor.
Được đề xuất
Laboratory Instrumentation
The ADS7805UB can serve laboratory and test-instrument front ends that digitize moderate-bandwidth bipolar signals. Its 16-bit resolution preserves fine detail in slow or precision measurements, while the 100 kSPS sampling capability provides more than enough throughput for many control and monitoring functions. A ±10 V input range can simplify connection to conditioned laboratory probes and sensor outputs. For accurate measurements, account for source impedance, settling time, reference accuracy, noise, and the acquisition interval rather than treating nominal conversion time as the complete measurement accuracy budget.
Được đề xuất
Sensor Interface Modules
The ADS7805UB is suitable for sensor-interface modules handling bipolar outputs from pressure, current, position, and industrial transducer assemblies. A ±10 V input range reduces the need for additional range conversion when the sensor already produces a bipolar voltage. The 16-bit resolution improves the representation of small signal changes, while the parallel interface allows a local controller to sample and process several channels over time. Designers should add appropriate input protection, filtering, and buffering where sensor drive impedance or overvoltage conditions could affect acquisition accuracy.
Được đề xuất
Embedded Control Systems
Embedded industrial controllers can use the ADS7805UB as a deterministic parallel-interface ADC for supervisory control loops and supervisory data channels. Its 10 us conversion time supports timely acquisition, while the 16-bit word width suits calibration, monitoring, and setpoint feedback. The SOIC package is practical for a through-hole controller board, and the parallel bus allows direct connection to suitable microprocessor or FPGA I/O. Confirm bus direction, output enable behavior, settling requirements, and acquisition timing with the host device before releasing the schematic.
Được đề xuất
Power and Energy Monitoring
The ADS7805UB is applicable to power-monitoring and energy-control equipment that measures bipolar current or voltage signals at a supervisory sampling rate. The ±10 V range can accept appropriately scaled signals, and the 16-bit resolution improves visibility into small deviations around a nominal operating point. Because the converter itself is not a dedicated energy-monitoring front end, the system must include suitable sensing, isolation, scaling, and filtering. Validate signal bandwidth and acquisition cadence to ensure that conversion time and bus transfer do not distort the selected measurement method.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho ADS7805UB — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | ADS7805UBE4 | ADS7825U/1K | ADS7830IPWR |
|---|---|---|---|---|
| Package | 28-pin SOIC (DW) | 28-pin SOIC (DW) | 28-pin SOIC | 28-pin SOIC |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Resolution | 16 bit | 16 bit | 16 bit | 16 bit |
| ADC Architecture | SAR | SAR | SAR | SAR |
Bảo phân biệt quan trọng
- Directly documented bipolar 16-bit conversion (vsADS7825U/1K)
- Known 10 us conversion timing for deterministic acquisition (vsADS7830IPWR)
- Simplified parallel data acquisition (vsADS7825U/1K)
- Closest identified same-family sourcing path (vsADS7825U/1K)
Ghi chú thiết kế
Route the analog input as a short, controlled-impedance trace over a continuous ground plane and keep switching-node or digital-clock traces away from the input. Place input and reference bypass components close to their associated pins, and follow the exact pin table and layout recommendations in the manufacturer datasheet. Because the ADS7805UB uses a parallel output bus, separate analog input routing from the 16-bit digital output region to reduce coupling into the sampling capacitor.
Treat the 10 us conversion time as the converter's conversion interval, not as a guarantee that the sampled value is immediately usable without considering acquisition, settling, and bus timing. Confirm the source impedance, sample-and-hold acquisition window, conversion signal, output-valid behavior, and host read timing in the datasheet. The 16-bit parallel bus also increases switching activity, so keep the output traces short where practical and confirm the host input capacitance and signal-integrity margin.
Do not substitute a family member solely because it has the same resolution or a similar package name. ADS7805UBE4 is the closest identified same-family option, while ADS7825U/1K and ADS7830IPWR require verification of pin mapping and electrical behavior. Check the exact ordering suffix, package, operating-temperature grade, qualification, acquisition timing, input range, and interface timing before approving a replacement.
Build the supply network from the datasheet's recommended capacitor values and placement. Keep the regulator output path and ground return compact, and avoid sharing high-current return paths with sensitive analog measurement nodes. The verified product snippets do not provide a numeric operating-voltage range or power-consumption value, so those limits should be taken directly from the manufacturer datasheet before defining the power tree, thermal budget, or bypass-capacitor rating.
Thông tin tuân thủ
The verified product listings identify the manufacturer, device type, package, resolution, conversion time, input range, and sampling characteristics, but they do not provide explicit compliance statements for the exact ADS7805UB ordering suffix.