ADS7805UB - 16-Bit 100 kSPS SAR ADC | Texas Instruments
MPN: ADS7805UB ✓ 啟用中ADS7805UB 概覽
An ADC is a signal-conditioning and digitization component that converts a continuous analog voltage into a digital value suitable for processing, measurement, control, or storage. The ADS7805 belongs to the SAR ADC family, where an internal capacitor array and successive comparison cycle resolve the input voltage. Compared with flash and pipeline ADC architectures, this SAR approach is well suited to precision industrial measurement, instrumentation, and data-acquisition systems where accuracy, interface simplicity, and deterministic conversion timing matter.
The ADS7805UB combines a 16-bit resolution with a minimum sampling rate of 100 kSPS and 86 dB minimum SINAD with a 20 kHz input frequency, according to the manufacturer datasheet. Its ±10 V input range supports direct acquisition of bipolar sensor signals in industrial environments. The parallel interface provides separate digital output lines for direct connection to a microprocessor, FPGA, or other parallel bus controller. An internal reference and clock simplify system design by reducing the number of external timing and calibration components.
The device is designed around a complete CMOS sampling ADC structure containing a sample-and-hold circuit, reference, clock, microprocessor interface, and tri-state output drivers. The 28-pin SOIC package is intended for through-hole assembly and conventional PCB routing. Because the converter is not a switching regulator, its power and thermal design requirements are modest, although correct grounding, reference bypassing, analog input routing, and digital-bus timing remain essential for achieving the specified accuracy.
Typical applications include industrial process control, precision instrumentation, data-acquisition modules, sensor-interface boards, laboratory measurement equipment, and embedded industrial controllers. The ADS7805UB is particularly useful when a design needs bipolar measurement, 16-bit resolution, and a deterministic parallel conversion interface without the complexity of a high-speed pipeline ADC.
When laying out the PCB, keep the analog input trace short, provide a solid ground plane, and decouple the supply pins close to the device. Confirm the acquisition timing and output-bus loading against the host processor requirements before beginning system integration. This page combines the manufacturer specifications with practical selection guidance, package information, and verified source links for design review and sourcing.
直接替換替代品,適用於 ADS7805UB — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: ADS7805UB (相同外形與佔位) — 差異在於 Architecture, Mounting Type, Package, Reference, Resolution.
ADS7805UBE4
✅ 直接替換📋 參考替代品(不在目錄中)
ADS7825U/1K
✅ 直接替換📋 參考替代品(不在目錄中)
ADS7830IPWR
✅ 直接替換📋 參考替代品(不在目錄中)
ADS7805UB 最大額定值與電氣特性
| ADC Type | Successive Approximation Register (SAR) |
| 解析度 | 16 bit |
| Number of Input Channels | 1 channel |
| 取樣率 | 100 kSPS minimum |
| Conversion Time | 10 us |
| 輸入電壓範圍 | ±10 V |
| SINAD | 86 dB minimum with 20 kHz input |
| 介面 | Parallel microprocessor interface |
| Architecture | CMOS sampling ADC |
| Internal Functions | Sample-and-hold, reference, clock, interface, 3-state output drivers |
| 封裝 | 28-pin SOIC (DW) |
| 安裝類型 | Through-hole |
| Input Type | Bipolar, ±10 V |
| 輸出類型 | 3-state parallel digital output |
| Reference | Internal reference |
ADS7805UB 28-pin soic (dw) 腳位配置指南
ADS7805UB(28-pin soic (dw) 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: ADS7805UB.
請參閱 資料表 以查看完整腳位配置。
典型應用
ADS7805UB 適用於 6 應用s: Industrial Process Measurement, Precision Data Acquisition, Laboratory Instrumentation, Sensor Interface Modules, Embedded Control Systems, Power and Energy Monitoring.
Industrial Process Measurement
The ADS7805UB fits industrial process-measurement channels that need higher resolution than a basic 8-bit or 12-bit converter while retaining a straightforward parallel data path. Its 16-bit resolution, ±10 V bipolar input range, and 10 us conversion time allow a controller to acquire pressure, temperature, position, or process-current signals without a complex high-speed interface. The 100 kSPS minimum sampling rate also supports rapid supervisory updates. Use a protected analog front end for field wiring, keep the input path short, and verify grounding and isolation requirements before connecting industrial sensors.
推薦
Precision Data Acquisition
For precision data-acquisition systems, the ADS7805UB combines 16-bit resolution with a 10 us conversion time and a parallel microprocessor interface. The architecture is appropriate when samples must be transferred directly into a digital bus without the latency and control overhead associated with a serial converter. Its documented 86 dB minimum SINAD with a 20 kHz input provides a useful basis for front-end and anti-alias design. Board planners should use a solid ground plane, short analog traces, controlled clocking, and output timing verified against the host processor.
推薦
Laboratory Instrumentation
The ADS7805UB can serve laboratory and test-instrument front ends that digitize moderate-bandwidth bipolar signals. Its 16-bit resolution preserves fine detail in slow or precision measurements, while the 100 kSPS sampling capability provides more than enough throughput for many control and monitoring functions. A ±10 V input range can simplify connection to conditioned laboratory probes and sensor outputs. For accurate measurements, account for source impedance, settling time, reference accuracy, noise, and the acquisition interval rather than treating nominal conversion time as the complete measurement accuracy budget.
推薦
Sensor Interface Modules
The ADS7805UB is suitable for sensor-interface modules handling bipolar outputs from pressure, current, position, and industrial transducer assemblies. A ±10 V input range reduces the need for additional range conversion when the sensor already produces a bipolar voltage. The 16-bit resolution improves the representation of small signal changes, while the parallel interface allows a local controller to sample and process several channels over time. Designers should add appropriate input protection, filtering, and buffering where sensor drive impedance or overvoltage conditions could affect acquisition accuracy.
推薦
Embedded Control Systems
Embedded industrial controllers can use the ADS7805UB as a deterministic parallel-interface ADC for supervisory control loops and supervisory data channels. Its 10 us conversion time supports timely acquisition, while the 16-bit word width suits calibration, monitoring, and setpoint feedback. The SOIC package is practical for a through-hole controller board, and the parallel bus allows direct connection to suitable microprocessor or FPGA I/O. Confirm bus direction, output enable behavior, settling requirements, and acquisition timing with the host device before releasing the schematic.
推薦
Power and Energy Monitoring
The ADS7805UB is applicable to power-monitoring and energy-control equipment that measures bipolar current or voltage signals at a supervisory sampling rate. The ±10 V range can accept appropriately scaled signals, and the 16-bit resolution improves visibility into small deviations around a nominal operating point. Because the converter itself is not a dedicated energy-monitoring front end, the system must include suitable sensing, isolation, scaling, and filtering. Validate signal bandwidth and acquisition cadence to ensure that conversion time and bus transfer do not distort the selected measurement method.
推薦
推薦產品摘要
工程參考資料,適用於 ADS7805UB — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | ADS7805UBE4 | ADS7825U/1K | ADS7830IPWR |
|---|---|---|---|---|
| Package | 28-pin SOIC (DW) | 28-pin SOIC (DW) | 28-pin SOIC | 28-pin SOIC |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Resolution | 16 bit | 16 bit | 16 bit | 16 bit |
| ADC Architecture | SAR | SAR | SAR | SAR |
主要差異化特點
- Directly documented bipolar 16-bit conversion (對比ADS7825U/1K)
- Known 10 us conversion timing for deterministic acquisition (對比ADS7830IPWR)
- Simplified parallel data acquisition (對比ADS7825U/1K)
- Closest identified same-family sourcing path (對比ADS7825U/1K)
設計說明
Route the analog input as a short, controlled-impedance trace over a continuous ground plane and keep switching-node or digital-clock traces away from the input. Place input and reference bypass components close to their associated pins, and follow the exact pin table and layout recommendations in the manufacturer datasheet. Because the ADS7805UB uses a parallel output bus, separate analog input routing from the 16-bit digital output region to reduce coupling into the sampling capacitor.
Treat the 10 us conversion time as the converter's conversion interval, not as a guarantee that the sampled value is immediately usable without considering acquisition, settling, and bus timing. Confirm the source impedance, sample-and-hold acquisition window, conversion signal, output-valid behavior, and host read timing in the datasheet. The 16-bit parallel bus also increases switching activity, so keep the output traces short where practical and confirm the host input capacitance and signal-integrity margin.
Do not substitute a family member solely because it has the same resolution or a similar package name. ADS7805UBE4 is the closest identified same-family option, while ADS7825U/1K and ADS7830IPWR require verification of pin mapping and electrical behavior. Check the exact ordering suffix, package, operating-temperature grade, qualification, acquisition timing, input range, and interface timing before approving a replacement.
Build the supply network from the datasheet's recommended capacitor values and placement. Keep the regulator output path and ground return compact, and avoid sharing high-current return paths with sensitive analog measurement nodes. The verified product snippets do not provide a numeric operating-voltage range or power-consumption value, so those limits should be taken directly from the manufacturer datasheet before defining the power tree, thermal budget, or bypass-capacitor rating.
合規資訊
The verified product listings identify the manufacturer, device type, package, resolution, conversion time, input range, and sampling characteristics, but they do not provide explicit compliance statements for the exact ADS7805UB ordering suffix.