Texas Instruments

ADS8329IPW - 16-Bit 1-MSPS SAR ADC | Texas Instruments

N.º da peça: ADS8329IPW ✓ Ativo
2.7 V to 5.5 V Vdss 16-pin TSSOP Package
MOQ: 1 |

ADS8329IPW Visão geral

The Texas Instruments ADS8329IPW is a low-power, 16-bit, 1-MSPS successive-approximation analog-to-digital converter with a unipolar input, operating from a 2.7 V to 5.5 V supply. The device is packaged in a 16-pin TSSOP and is intended for precision signal-acquisition systems that require accurate conversion at a relatively high sampling rate. Its serial interface reduces the number of external signal connections and supports compact, high-density instrument designs.

An ADC is an interface IC that converts an analog voltage into a digital code for processing by a microcontroller, DSP, FPGA, or other digital controller. The ADS8329 belongs to the successive-approximation, or SAR, ADC family. SAR ADCs use a capacitor-based internal sampling network and compare the sampled input against an internal reference, producing a deterministic conversion result without the complexity of a pipeline converter. This makes the ADS8329 suitable for industrial measurement, data acquisition, and precision control systems.

Key features include 16-bit resolution, a 1-MSPS conversion rate, a 2.7 V to 5.5 V analog supply range, and a single unipolar analog input. The capacitor-based SAR core includes an inherent sample-and-hold function. A high-speed, wide-voltage serial interface allows the converter to communicate efficiently with digital control logic while limiting PCB pin count and signal-routing complexity compared with a parallel ADC.

The ADS8329 is optimized for low-power operation and unipolar input measurement. Because the converter is based on a SAR architecture, it can complete successive comparison cycles at 1 MSPS while providing the accuracy and linearity expected from a 16-bit converter. The serial interface is especially useful when the ADC is located near an analog sensor and the resulting digital data must be transferred over a limited number of PCB traces.

Typical applications include industrial process monitoring, portable instrumentation, sensor-interface modules, test and measurement equipment, and embedded control systems. The unipolar input arrangement is well suited to sensors whose output remains between ground and the positive analog supply range. Systems requiring two analog channels may evaluate the ADS8330, which uses the same converter core and adds a two-to-one input multiplexer, although board compatibility should be confirmed from the device pinouts before substitution.

For reliable operation, the analog and digital sections should be laid out according to the manufacturer datasheet, with clean reference connections, short return paths, and adequate bypassing near the supply pins. The serial interface timing, conversion trigger sequence, input range, and reference configuration must also be implemented exactly as described in the datasheet. These measures are particularly important because reference and layout errors can consume more of the available measurement accuracy than the nominal ADC resolution.

This product page brings together the converter's principal operating parameters, package information, practical application guidance, selection criteria, and a qualified comparison framework. It also distinguishes the direct ADS8329 configuration from the multiplexed ADS8330 so engineers can assess channel requirements, interface behavior, and PCB compatibility before finalizing a design.

Alternativas drop-in para ADS8329IPW — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Nenhuma alternativa drop-in disponível para este produto.

Solicitar alternativas

ADS8329IPW Classificações máximas e características elétricas

Converter Type Successive-approximation register (SAR) ADC
Resolução 16 bit
Taxa de amostragem 1 MSPS
Analog Supply Voltage Range 2.7 V to 5.5 V
Analog Input Type Unipolar, 1 input
Internal Sampling Structure Capacitor-based SAR with inherent sample-and-hold
Output Interface High-speed, wide-voltage serial interface
Encapsulamento 16-pin TSSOP
Terminal Count 16 terminals
Temperature Grade Industrial
AEC-Q100 Qualification Not applicable

Guia de Configuração de Pinos do ADS8329IPW 16-pin tssop

Configuração de pinos para ADS8329IPW (pacote 16-pin tssop). Este componente analógico possui pinos de entrada, saída e alimentação. Consulte o datasheet do fabricante para configurações de offset null, compensação e pino de enable. Ideal para circuitos de condicionamento de sinal e amplificadores.

Diagrama de pinagem do pacote 16-pin tssop para ADS8329IPW

Nenhum dado detalhado de pinagem disponível para ADS8329IPW.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

ADS8329IPW é adequado para 6 aplicaçãos: Industrial Process Monitoring, Portable Sensor Interfaces, Precision Data-Acquisition Systems, Test and Measurement Equipment, Embedded Control Systems, Battery-Powered Instrumentation.

🏭

Industrial Process Monitoring

The ADS8329IPW fits single-channel process instrumentation that must resolve a unipolar sensor signal while transferring results through a compact serial interface. Its 16-bit resolution and 1-MSPS sampling rate provide a useful combination for pressure, temperature, level, and flow transmitter front ends operating from a 2.7 V to 5.5 V analog supply. Place the converter close to the sensor-conditioning network, preserve a quiet reference connection, and route the serial output away from switching regulators. The SAR architecture provides deterministic conversion timing, while the serial interface avoids a wide parallel bus that would consume additional PCB area and digital I/O.

📱

Portable Sensor Interfaces

The ADS8329IPW is suitable for portable measurement modules where converter area, supply range, and serial connectivity matter. A 2.7 V minimum analog supply supports low-voltage systems, while the 1-MSPS rate can capture changing sensor values more quickly than a slow-resolution acquisition stage. The 16-bit output preserves fine detail for resistive, capacitive, or transducer-based sensors whose signals remain unipolar. Use the serial interface for a compact microcontroller or digital controller connection, and carefully separate analog return paths from switching currents to preserve the benefit of the converter's 16-bit nominal resolution.

🖥️

Precision Data-Acquisition Systems

The ADS8329IPW can serve as the central converter in a compact, high-resolution data-acquisition module. At 16 bits and 1 MSPS, it combines detailed numerical representation with a sampling interval suitable for many laboratory and industrial waveforms. The single unipolar channel simplifies analog conditioning when one input is sufficient, and the serial interface reduces the number of traces between the converter and a controller. For best performance, follow the Texas Instruments reference and layout guidance, use short analog paths, and verify the selected input range and reference voltage against the manufacturer electrical-characteristics table.

🔧

Test and Measurement Equipment

The ADS8329IPW is appropriate for compact measurement instruments that acquire one unipolar analog value at a moderate speed and require a high-resolution digital result. Its 1-MSPS conversion rate supports rapid updates, while the 16-bit code width provides the numerical granularity expected from precision bench equipment. A serial readout also simplifies integration into a controller-based instrument without requiring a parallel data bus. Designers should treat the ADC reference, source impedance, input-settling network, and trigger timing as part of the signal chain, because these factors directly affect whether the 16-bit conversion result remains useful in a calibrated instrument.

🧩

Embedded Control Systems

The ADS8329IPW supports embedded controllers that need periodic readings from a single unipolar feedback or sensing channel. Its 1-MSPS capability permits a much faster acquisition loop than the 16-bit resolution alone would suggest, while the serial interface conserves microcontroller I/O compared with a parallel ADC. The 2.7 V to 5.5 V supply range provides flexibility across compact control boards, but the complete system voltage arrangement must follow the datasheet. Firmware should account for conversion latency, command timing, and the serial word format before using sampled values in a safety-sensitive or high-dynamic-range control loop.

⚡

Battery-Powered Instrumentation

The ADS8329IPW can be evaluated for battery-powered instrumentation that measures one unipolar sensor output and benefits from a compact, low-voltage SAR converter. Its 2.7 V minimum supply supports low-energy system architectures, and the serial interface allows the converter to remain physically close to the sensor and analog-conditioning stages. Sampling at 1 MSPS provides timing flexibility, but the effective system energy should be evaluated using the datasheet power characteristics and the selected acquisition duty cycle. Analog signal conditioning, reference stability, and leakage paths may dominate battery life, so converter selection should be integrated with the complete power budget.

What are the key specifications of ADS8329IPW that engineers should know?
The ADS8329IPW is a 16-bit, 1-MSPS, single-input unipolar SAR ADC that operates from a 2.7 V to 5.5 V analog supply and uses a high-speed serial interface. According to the Texas Instruments product page and part-details page, its capacitor-based SAR core provides inherent sample-and-hold, while the 16-pin TSSOP package supports compact, low-pin-count PCB designs. These specifications make the device appropriate for precision data-acquisition, industrial monitoring, and embedded measurement systems.
Where can I download the ADS8329IPW datasheet PDF?
The official ADS8329IPW datasheet is available through the Texas Instruments ADS8329 product page at https://www.ti.com/product/ADS8329. The manufacturer describes the device there as a 2.7 V to 5.5 V, 16-bit, 1-MSPS serial ADC. The part-details page for ADS8329IPW links to the low-power, 16-bit, 1-MHz single/dual-unipolar-input ADC datasheet, which contains the authoritative pin descriptions, electrical characteristics, timing diagrams, and application information.
What is the operating voltage of ADS8329IPW?
The ADS8329IPW operates from a 2.7 V minimum to 5.5 V maximum analog supply. According to the Texas Instruments product page, the device is a 2.7 V-to-5.5 V, 16-bit, 1-MSPS serial analog-to-digital converter. Designers should use the complete datasheet electrical-characteristics table when confirming the permitted digital-supply range, reference configuration, input limits, and operating-temperature boundaries for the intended system.
What is the resolution and sampling rate of ADS8329IPW?
The ADS8329IPW provides 16-bit resolution and a maximum sampling rate of 1 MSPS. Texas Instruments describes the ADS8329 as a low-power, 16-bit, 1-MSPS ADC with a unipolar input. A 1-MSPS rate allows one conversion to be completed every 1 microsecond in ideal timing terms, making the converter suitable for sensors and control signals that require faster updates than a general-purpose low-speed acquisition converter.
What type of ADC is the ADS8329IPW?
The ADS8329IPW is a successive-approximation register, or SAR, analog-to-digital converter. According to the Texas Instruments part-details page, it uses a 16-bit capacitor-based SAR core with inherent sample-and-hold. SAR ADCs are commonly used for precision acquisition because they offer deterministic conversion behavior, straightforward digital control, and a practical balance between resolution, speed, power, and implementation complexity.
What is the difference between ADS8329IPW and ADS8330?
The ADS8329IPW has one unipolar analog input, while the ADS8330 uses the same converter core and adds a two-to-one input multiplexer with a programmable tag-bit output option. Texas Instruments identifies the ADS8330 as an extension of the ADS8329 core. Both support a 16-bit, 1-MSPS serial conversion architecture, but a design requiring two selected input channels should evaluate the ADS8330 rather than treating it as an automatic one-for-one replacement.
When should I choose ADS8329IPW over ADS8330?
Choose the ADS8329IPW when the design needs only one unipolar analog channel and benefits from the simpler single-channel configuration. Choose the ADS8330 when two analog signals must be selected through a two-to-one multiplexer or when channel identification through the tag-bit function is useful. The Texas Instruments product page confirms that the ADS8330 shares the ADS8329 core, but channel multiplexing and pin compatibility still require review against the respective datasheets.
Can ADS8330 replace ADS8329IPW on the same PCB?
The ADS8330 cannot be treated as a confirmed drop-in replacement for the ADS8329IPW solely because both use the same SAR core. The ADS8330 adds a two-to-one input multiplexer and tag-bit option, changing the functional requirements of the analog and digital interface. Texas Instruments identifies both as related family members, but a PCB substitution requires verification of package, pin assignments, input configuration, serial timing, and control logic in the manufacturer datasheets.
What can replace ADS8329IPW?
No directly pin-compatible replacement is established by the available manufacturer information. The closest family option is the ADS8330, which uses the same 16-bit SAR core and supports the same 1-MSPS class of conversion, but it adds a two-to-one multiplexer and tag-bit function. Treat it as a design alternative rather than a guaranteed drop-in replacement, and verify every pin and signal before revising an ADS8329IPW PCB.
What is the best drop-in replacement for ADS8329IPW?
The ADS8329IPW should remain the baseline choice unless the manufacturer confirms an exact compatible orderable variant for the required package and temperature grade. Packaging suffixes and tape-and-reel order codes are not distinct electrical replacements. The ADS8330 is functionally related through the shared converter core, but its multiplexer and tag-bit behavior prevent it from being classified automatically as a pin-for-pin drop-in replacement.
Is ADS8329IPW suitable for industrial sensor measurement?
The ADS8329IPW is suitable for many industrial sensor-measurement systems that use a single unipolar input and require 16-bit resolution at a 1-MSPS sampling rate. Its 2.7 V to 5.5 V supply range and serial interface can simplify connection to sensors, microcontrollers, and embedded controllers. The analog front end must still ensure that the sensor signal remains within the converter's input range and that the reference and grounding design meet the accuracy required.
Where can I find the ADS8329IPW pinout?
The ADS8329IPW pinout is found in the pin-configuration section of the Texas Instruments ADS8329 manufacturer datasheet and on the official part-details page at https://www.ti.com/product/ADS8329/part-details/ADS8329IPW. The device uses a 16-pin TSSOP package. Use the datasheet's terminal table and package drawing when assigning PCB nets because serial-interface timing, reference connections, control signals, and supply pins must follow the exact manufacturer configuration.
How should ADS8329IPW be bypassed and laid out?
Place the required bypass capacitors directly beside their associated supply and reference pins, and route analog inputs with short traces to minimize pickup of switching noise. The Texas Instruments datasheet's application and layout guidance should be followed for reference grounding and digital-return routing. A clean serial clock path is also important because timing jitter can affect conversion accuracy even when the ADC's nominal resolution and sampling rate are unchanged.
Is ADS8329IPW compliant with RoHS and REACH?
The RoHS and REACH status must be confirmed for the exact orderable ADS8329IPW using the Texas Instruments product page and its compliance documentation. The industrial temperature-grade description identifies the device as a 16-pin TSSOP ADS8329 variant, but it does not by itself establish every material-compliance declaration. Request the current manufacturer compliance record before treating the device as suitable for a regulated production program.
Where can I buy ADS8329IPW and check price and lead time?
Use the Request a Quote form on this page to request current ADS8329IPW price, stock, lead time, and order quantity. The form allows an engineer to obtain a transaction response for the exact Texas Instruments orderable MPN and industrial-grade 16-pin TSSOP configuration. Because component availability and commercial terms can change, request the quote at the time of the planned build rather than relying on a historical catalog figure.

Dados de referência de engenharia para ADS8329IPW — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the ADS8329IPW when the design requires one unipolar analog channel, 16-bit resolution, and conversion capability up to 1 MSPS in a 16-pin TSSOP package. It is particularly suitable for compact industrial instruments, portable sensor modules, and embedded acquisition systems where a serial interface is preferred to a parallel ADC bus. Evaluate the ADS8330 instead when two analog channels or channel-identification information are needed; its two-to-one multiplexer and tag-bit function add useful capability but prevent treating it as an automatic ADS8329IPW drop-in replacement. For either device, confirm the exact input range, reference arrangement, digital interface timing, and PCB pin compatibility from the manufacturer datasheet. If the design requires more channels, a different sampling rate, or a package already supported by another product family, broaden the search beyond this family rather than forcing a mechanical substitution.

Comparação com alternativas

Parâmetro Este produto
Package 16-pin TSSOP
Brand Texas Instruments
Converter Architecture Successive-approximation register (SAR)
Resolution 16 bit
Sampling Rate 1 MSPS
Analog Supply Voltage 2.7 V to 5.5 V
Analog Input Configuration Single unipolar input
Output Interface High-speed, wide-voltage serial interface
Sampling Network Capacitor-based SAR with inherent sample-and-hold
Temperature Grade Industrial

Principais diferenciais

  • Simpler single-channel conversion configuration (vs ADS8330)
  • High-resolution sampling capability in a compact package (vs ADS8330)
  • Direct single-input architecture for instrumentation (vs ADS8330)

Notas de projeto

Follow the Texas Instruments ADS8329 recommended layout for analog, digital, and reference connections. Place required bypass capacitors close to the associated pins, keep the analog input route short, and provide a direct return path for analog currents. If the converter is placed near a switching regulator or digital processor, route serial signals away from those high-current paths and use a quiet ground strategy that prevents converter return current from flowing through sensitive input-reference nodes.

Treat the serial clock as a controlled digital signal even though the converter uses a serial interface. Route it over a continuous return path, avoid crossing noisy power-stage nodes, and terminate the interface according to the system topology specified in the manufacturer datasheet. Pay particular attention to clock timing and data setup or hold requirements; timing violations can corrupt a conversion result even when the analog input and reference are otherwise correct.

Do not assume that the ADS8330 is automatically interchangeable with the ADS8329IPW. The ADS8330 adds a two-to-one input multiplexer and programmable tag-bit behavior, so its functional and pin requirements differ even though it shares the ADS8329 converter core. Before choosing it for a replacement, compare the package drawing, terminal assignments, input selection logic, conversion timing, and serial output protocol against the specific ADS8329IPW design.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

The exact ADS8329IPW orderable device is described as an industrial-grade, 16-pin TSSOP ADC. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not established by the retrieved manufacturer descriptions and require confirmation from the current Texas Instruments compliance documentation.

Buscas relacionadas

ADS8329IPW ADS8329IPW datasheet ADS8329IPW datasheet pdf ADS8329IPW pinout ADS8329IPW specifications ADS8329IPW TSSOP ADS8329IPW equivalent ADS8329IPW replacement ADS8329IPW price ADS8329IPW stock Texas Instruments ADS8329IPW ADS8329IPW vs ADS8330 16 bit 1 MSPS serial ADC ADS8329IPW application circuit ADS8329IPW lead time

Componentes & termos relacionados

Texas Instruments ADS8329IPW ADS8329 ADS8330 ADS1262IPW ADS1131IDR analog-to-digital converter ADC successive-approximation register SAR ADC capacitor-based SAR core sample-and-hold unipolar input serial interface 16-bit resolution 1-MSPS sampling rate 2.7 V to 5.5 V supply 16-pin TSSOP TSSOP package family surface-mount package industrial instrumentation sensor measurement data acquisition embedded control reference voltage
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ