AFS600-1FG256I - 600K-Gate Fusion Mixed-Signal FPGA | Microchip
部品番号: AFS600-1FG256I ✓ 生産中AFS600-1FG256I 概要
A mixed-signal FPGA is a programmable semiconductor that combines digital logic with configurable analog and memory resources in one device. It belongs to the hierarchy FPGA → programmable logic device → semiconductor, while adding analog-to-digital conversion, analog output, and embedded flash capabilities. This integration can reduce the number of separate components required in industrial control, communications, instrumentation, and embedded processing systems compared with a discrete FPGA-and-converter design.
The AFS600 family provides 600,000 system gates, 119 I/O, and integrated clock-management resources. Its configuration is stored in flash, allowing the programmed design to remain available after power-off and supporting live-at-power-up behavior. The device is manufactured using an advanced 130 nm, seven-layer-metal, flash-based CMOS process. A 1.5 V core supply supports low-voltage, high-density programmable logic implementations.
The AFS600-1FG256I is specifically identified as an extended-temperature variant, with a verified operating range of 0°C to 85°C. Its 256-LBGA package provides 256 terminals in a compact 1 mm-pitch land pattern. Unlike a conventional glue-logic FPGA, the Fusion architecture also incorporates configurable analog blocks and substantial embedded flash, enabling mixed-signal data acquisition and control functions within the same device.
Typical uses include industrial automation and factory-control systems, communications equipment, test and measurement instruments, embedded data-acquisition controllers, and automotive or aerospace control prototypes requiring a deterministic nonvolatile configuration. In these systems, the 600K logic capacity supports control logic, state machines, and interfaces, while the integrated analog and flash resources can simplify the architecture around them.
Design planning should verify the exact package pinout, supported I/O standards, analog performance, clock requirements, and power-supply sequencing against the manufacturer datasheet before layout release. The 256-ball BGA also requires careful escape routing, power distribution, and ground-plane design. Migration among speed, temperature, or military variants requires checking device identifiers and qualification requirements rather than assuming that every AFS600 ordering code is interchangeable.
This page combines the verified 600K-gate, 119-I/O, 1.5 V, 130 nm, temperature, and 256-LBGA characteristics with package-aware alternatives and practical sourcing information. It also distinguishes true same-footprint candidates from broader functional equivalents and identifies acquisition data that still requires confirmation from the manufacturer.
ドロップイン代替品: AFS600-1FG256I — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: AFS600-1FG256I （同一形状・フットプリント） — 相違点: Process Technology, System Gates, Operating Temperature, Package, Configuration Memory.
M7AFS600-FG256I
✅ ドロップイン価格はお問い合わせください
データシートを見る →M7AFS600-FGG256I
✅ ドロップイン価格はお問い合わせください
データシートを見る →M1AFS600-1FG256
✅ ドロップイン価格はお問い合わせください
データシートを見る →M1AFS600-1FG256I
✅ ドロップイン📋 参考代替品（カタログ未掲載）
M1AFS600-1FGG256
✅ ドロップイン価格はお問い合わせください
データシートを見る →M1AFS600-1FGG256I
✅ ドロップイン📋 参考代替品（カタログ未掲載）
AFS600-1FG256I 最大定格＆電気的特性
| Device Type | Fusion mixed-signal field-programmable gate array (FPGA) |
| System Gates | 600,000 gates |
| Logic Family | Flash-based CMOS |
| I/O Count | 119 I/O |
| 電源電圧 | 1.5 V |
| Process Technology | 130 nm CMOS |
| Metal Layers | 7 layers |
| パッケージ | 256-LBGA, 1 mm pitch |
| ピン数 | 256 pins |
| 動作温度 | 0°C to 85°C |
| Configuration Memory | Nonvolatile flash |
| Power-Up Behavior | Live at power-up (LAPU) |
| Integrated Resources | Configurable analog, large flash memory blocks, clock generation and management |
| Programmable Logic | High-performance flash-based programmable logic |
| Junction Test Temperature | 100°C |
AFS600-1FG256I 256-lbga, 1 mm pitch ピン配置ガイド
AFS600-1FG256I (256-lbga, 1 mm pitch パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: AFS600-1FG256I.
詳細は データシート をご参照ください。
主な用途
AFS600-1FG256I の用途: 6 件s: Industrial Automation and Factory Control, Communications and Network Interface Equipment, Test and Measurement Instrumentation, Embedded Data-Acquisition Systems, Aerospace and Defense Control Prototypes, Automotive and Vehicle Electronic Controls.
Industrial Automation and Factory Control
The AFS600-1FG256I fits factory-control systems that combine sequencing logic with analog monitoring in one mixed-signal FPGA. Its 600,000 system gates and 119 I/O provide capacity for control state machines, communications interfaces, and data handling, while the verified 0°C-to-85°C range supports industrial-temperature environments. The device is implemented as the central controller between sensors, actuators, and field-bus equipment, reducing external component count compared with separate logic and analog devices. Engineers must confirm the required I/O standards, supported clocking, analog channel count, and power sequencing in the manufacturer documentation.
おすすめ
Communications and Network Interface Equipment
The AFS600-1FG256I is suitable for communications equipment requiring programmable protocol handling, control logic, and a nonvolatile configuration in a compact 256-LBGA package. Its 600,000-system-gate capacity can support medium-complexity packet processing, interfaces, and state machines, while the 119 I/O provide connections for data buses and control signals. Because the supplied data does not state supported transceiver I/O standards, maximum interface rates, or clock frequencies, those limits must be checked before selecting a specific line-rate application. The flash-based architecture also retains configuration across power cycles, simplifying field startup.
おすすめ
Test and Measurement Instrumentation
The AFS600-1FG256I can serve as the programmable control and data-processing core in test and measurement instruments because it combines 600K system gates with configurable analog resources and large flash blocks. Engineers can implement acquisition sequencing, calibration tables, stimulus control, and data processing in one monolithic device while retaining configuration when power is removed. The 1.5 V core supply supports compact high-density logic, and the 256-LBGA package requires careful BGA escape routing. Exact analog accuracy, bandwidth, converter topology, and timing performance are not included in the supplied data and must be confirmed from the manufacturer datasheet before instrumentation design begins.
おすすめ
Embedded Data-Acquisition Systems
The AFS600-1FG256I is well matched to embedded data-acquisition controllers that need programmable digital logic alongside configurable analog circuitry. The 119 I/O support external sensors, converters, digital interfaces, and control signals, while the 600,000-system-gate capacity can process collected data, implement filters, and coordinate storage. Its nonvolatile flash configuration allows the acquisition controller to restart with a known design after power interruption. The mixed-signal integration can reduce board partitioning, although engineers must validate analog input ranges, sampling behavior, external component requirements, and deterministic timing against the complete device documentation.
おすすめ
Aerospace and Defense Control Prototypes
The AFS600-1FG256I can serve as a starting point for aerospace, defense, and rugged embedded-control prototypes that require 600K gates of programmable logic, nonvolatile configuration, and integrated mixed-signal functions. The verified 0°C-to-85°C operating range addresses industrial-temperature applications, while the cross-reference data identifies M1AFS600 variants for qualification-oriented alternatives. A standard device is not automatically qualified for flight, so developers must review the exact M1 ordering code, screening records, radiation requirements, and customer-specific certification evidence. Pin compatibility and package reuse should be validated against the selected replacement before schematic or layout changes.
おすすめ
Automotive and Vehicle Electronic Controls
The AFS600-1FG256I can be evaluated for vehicle electronic-control prototypes requiring deterministic programmable logic, mixed-signal integration, and nonvolatile configuration. Its 600,000 system gates and 119 I/O are potentially useful for coordinating sensors, actuators, diagnostics, and communication logic within a central controller. The verified 0°C-to-85°C industrial range alone does not establish AEC-Q100 qualification, so automotive production use requires a specifically qualified ordering code and supporting compliance documentation. Verify transient protection, I/O electrical limits, functional-safety evidence, lifetime expectations, and package reliability before selecting it for a safety-relevant automotive design.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: AFS600-1FG256I — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | AFS600-FG256I | AFS600-FGG256I | M1AFS600-1FG256 | M1AFS600-1FG256I | M1AFS600-1FGG256 |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 256-LBGA (FBGA-256, 1 mm pitch) | 256-LBGA (FBGA-256, 1 mm pitch) | 256-LBGA (FBGA-256, 1 mm pitch) | 256-LBGA (FBGA-256, 1 mm pitch) | 256-LBGA (FBGA-256, 1 mm pitch) | 256-LBGA (FBGA-256, 1 mm pitch) |
| System Gates | 600,000 gates | 600,000 gates | 600,000 gates | 600,000 gates | 600,000 gates | 600,000 gates |
主な差別化要因
- Higher verified operating-temperature ceiling （vs AFS600-FG256I)
- Extended-temperature identity while retaining the 600K AFS600 architecture （vs AFS600-FGG256I)
- Nonvolatile configuration without a separate configuration loader （vs M1AFS600-1FG256)
- Mixed-signal integration in a compact 256-ball package （vs M1AFS600-1FGG256I)
設計ノート
Treat the 1 mm-pitch 256-LBGA as a high-density routing constraint. Follow the manufacturer's recommended land pattern, escape-routing layers, via rules, solder-mask definition, and paste stencil geometry rather than deriving them from the generic BGA package name. Keep the 1.5 V supply and ground distribution planes continuous under the device, place local decoupling at the corresponding power balls, and route sensitive clock or analog nets away from switching and high-current return paths.
The verified data confirms a 1.5 V supply but does not provide core current, quiescent current, I/O current, or power-up sequencing limits. Do not size the supply from an assumed FPGA utilization. Estimate worst-case consumption from the manufacturer power tables for the actual clock rate, I/O activity, logic utilization, and selected temperature grade, then add regulator headroom and verify startup behavior across all power rails. The tier prices remain quote-required because no verified unit pricing was supplied.
Do not treat every AFS600 ordering code as automatically interchangeable. The verified data distinguishes the target's 0°C-to-85°C range from AFS600-FG256I's 0°C-to-70°C range, and the cross-reference results contain multiple M1 and FGG ordering attributes. Before substitution, compare the complete manufacturer ordering table, speed grade, temperature grade, package revision, qualification status, timing constraints, and pin definitions. Also note that a functional-equivalent listing is not itself proof of programming-file, bitstream, or system-level compatibility.
Calculate thermal performance from actual board construction and device utilization rather than from the package name alone. The supplied data identifies a 100°C junction test condition but provides no junction-temperature limit, thermal resistance, or power-loss table. Use the manufacturer thermal model with the selected package, ambient temperature, airflow, PCB copper, and neighboring heat sources. Validate that adjacent components also remain within their ratings during sustained maximum-activity operation.
コンプライアンス情報
The supplied data does not explicitly state RoHS, REACH, lead-free, halogen-free, conflict-minerals, or AEC-Q100 status. The standard AFS600-1FG256I is therefore not presented as AEC-Q100 qualified; M1 ordering variants require their own qualification records.
