AFS600-1FG256I - 600K-Gate Fusion Mixed-Signal FPGA | Microchip
料号： AFS600-1FG256I ✓ 量产中AFS600-1FG256I 概述
A mixed-signal FPGA is a programmable semiconductor that combines digital logic with configurable analog and memory resources in one device. It belongs to the hierarchy FPGA → programmable logic device → semiconductor, while adding analog-to-digital conversion, analog output, and embedded flash capabilities. This integration can reduce the number of separate components required in industrial control, communications, instrumentation, and embedded processing systems compared with a discrete FPGA-and-converter design.
The AFS600 family provides 600,000 system gates, 119 I/O, and integrated clock-management resources. Its configuration is stored in flash, allowing the programmed design to remain available after power-off and supporting live-at-power-up behavior. The device is manufactured using an advanced 130 nm, seven-layer-metal, flash-based CMOS process. A 1.5 V core supply supports low-voltage, high-density programmable logic implementations.
The AFS600-1FG256I is specifically identified as an extended-temperature variant, with a verified operating range of 0°C to 85°C. Its 256-LBGA package provides 256 terminals in a compact 1 mm-pitch land pattern. Unlike a conventional glue-logic FPGA, the Fusion architecture also incorporates configurable analog blocks and substantial embedded flash, enabling mixed-signal data acquisition and control functions within the same device.
Typical uses include industrial automation and factory-control systems, communications equipment, test and measurement instruments, embedded data-acquisition controllers, and automotive or aerospace control prototypes requiring a deterministic nonvolatile configuration. In these systems, the 600K logic capacity supports control logic, state machines, and interfaces, while the integrated analog and flash resources can simplify the architecture around them.
Design planning should verify the exact package pinout, supported I/O standards, analog performance, clock requirements, and power-supply sequencing against the manufacturer datasheet before layout release. The 256-ball BGA also requires careful escape routing, power distribution, and ground-plane design. Migration among speed, temperature, or military variants requires checking device identifiers and qualification requirements rather than assuming that every AFS600 ordering code is interchangeable.
This page combines the verified 600K-gate, 119-I/O, 1.5 V, 130 nm, temperature, and 256-LBGA characteristics with package-aware alternatives and practical sourcing information. It also distinguishes true same-footprint candidates from broader functional equivalents and identifies acquisition data that still requires confirmation from the manufacturer.
直接替换替代料： AFS600-1FG256I ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： AFS600-1FG256I （相同外形与封装尺寸） ——差异在于 Process Technology, System Gates, Operating Temperature, Package, Configuration Memory.
M7AFS600-FG256I
✅ 直接替换联系询价
查看数据手册 →M7AFS600-FGG256I
✅ 直接替换联系询价
查看数据手册 →M1AFS600-1FG256
✅ 直接替换联系询价
查看数据手册 →M1AFS600-1FG256I
✅ 直接替换📋 参考替代料（不在目录中）
M1AFS600-1FGG256
✅ 直接替换联系询价
查看数据手册 →M1AFS600-1FGG256I
✅ 直接替换📋 参考替代料（不在目录中）
AFS600-1FG256I 最大额定值与电气特性
| Device Type | Fusion mixed-signal field-programmable gate array (FPGA) |
| System Gates | 600,000 gates |
| Logic Family | Flash-based CMOS |
| I/O Count | 119 I/O |
| 电源电压 | 1.5 V |
| Process Technology | 130 nm CMOS |
| Metal Layers | 7 layers |
| 封装 | 256-LBGA, 1 mm pitch |
| 引脚数量 | 256 pins |
| 工作温度 | 0°C to 85°C |
| Configuration Memory | Nonvolatile flash |
| Power-Up Behavior | Live at power-up (LAPU) |
| Integrated Resources | Configurable analog, large flash memory blocks, clock generation and management |
| Programmable Logic | High-performance flash-based programmable logic |
| Junction Test Temperature | 100°C |
AFS600-1FG256I 256-lbga, 1 mm pitch 引脚配置指南
AFS600-1FG256I（256-lbga, 1 mm pitch 封装）的引脚配置。 该数字 IC 包含 GPIO、通信接口（UART、SPI、I2C）和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据： AFS600-1FG256I.
请参阅 数据手册 以查看完整引脚配置。
典型应用
AFS600-1FG256I 适用于 6 应用s: Industrial Automation and Factory Control, Communications and Network Interface Equipment, Test and Measurement Instrumentation, Embedded Data-Acquisition Systems, Aerospace and Defense Control Prototypes, Automotive and Vehicle Electronic Controls.
Industrial Automation and Factory Control
The AFS600-1FG256I fits factory-control systems that combine sequencing logic with analog monitoring in one mixed-signal FPGA. Its 600,000 system gates and 119 I/O provide capacity for control state machines, communications interfaces, and data handling, while the verified 0°C-to-85°C range supports industrial-temperature environments. The device is implemented as the central controller between sensors, actuators, and field-bus equipment, reducing external component count compared with separate logic and analog devices. Engineers must confirm the required I/O standards, supported clocking, analog channel count, and power sequencing in the manufacturer documentation.
推荐
Communications and Network Interface Equipment
The AFS600-1FG256I is suitable for communications equipment requiring programmable protocol handling, control logic, and a nonvolatile configuration in a compact 256-LBGA package. Its 600,000-system-gate capacity can support medium-complexity packet processing, interfaces, and state machines, while the 119 I/O provide connections for data buses and control signals. Because the supplied data does not state supported transceiver I/O standards, maximum interface rates, or clock frequencies, those limits must be checked before selecting a specific line-rate application. The flash-based architecture also retains configuration across power cycles, simplifying field startup.
推荐
Test and Measurement Instrumentation
The AFS600-1FG256I can serve as the programmable control and data-processing core in test and measurement instruments because it combines 600K system gates with configurable analog resources and large flash blocks. Engineers can implement acquisition sequencing, calibration tables, stimulus control, and data processing in one monolithic device while retaining configuration when power is removed. The 1.5 V core supply supports compact high-density logic, and the 256-LBGA package requires careful BGA escape routing. Exact analog accuracy, bandwidth, converter topology, and timing performance are not included in the supplied data and must be confirmed from the manufacturer datasheet before instrumentation design begins.
推荐
Embedded Data-Acquisition Systems
The AFS600-1FG256I is well matched to embedded data-acquisition controllers that need programmable digital logic alongside configurable analog circuitry. The 119 I/O support external sensors, converters, digital interfaces, and control signals, while the 600,000-system-gate capacity can process collected data, implement filters, and coordinate storage. Its nonvolatile flash configuration allows the acquisition controller to restart with a known design after power interruption. The mixed-signal integration can reduce board partitioning, although engineers must validate analog input ranges, sampling behavior, external component requirements, and deterministic timing against the complete device documentation.
推荐
Aerospace and Defense Control Prototypes
The AFS600-1FG256I can serve as a starting point for aerospace, defense, and rugged embedded-control prototypes that require 600K gates of programmable logic, nonvolatile configuration, and integrated mixed-signal functions. The verified 0°C-to-85°C operating range addresses industrial-temperature applications, while the cross-reference data identifies M1AFS600 variants for qualification-oriented alternatives. A standard device is not automatically qualified for flight, so developers must review the exact M1 ordering code, screening records, radiation requirements, and customer-specific certification evidence. Pin compatibility and package reuse should be validated against the selected replacement before schematic or layout changes.
推荐
Automotive and Vehicle Electronic Controls
The AFS600-1FG256I can be evaluated for vehicle electronic-control prototypes requiring deterministic programmable logic, mixed-signal integration, and nonvolatile configuration. Its 600,000 system gates and 119 I/O are potentially useful for coordinating sensors, actuators, diagnostics, and communication logic within a central controller. The verified 0°C-to-85°C industrial range alone does not establish AEC-Q100 qualification, so automotive production use requires a specifically qualified ordering code and supporting compliance documentation. Verify transient protection, I/O electrical limits, functional-safety evidence, lifetime expectations, and package reliability before selecting it for a safety-relevant automotive design.
推荐
推荐产品汇总
工程参考数据： AFS600-1FG256I ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | AFS600-FG256I | AFS600-FGG256I | M1AFS600-1FG256 | M1AFS600-1FG256I | M1AFS600-1FGG256 |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 256-LBGA (FBGA-256, 1 mm pitch) | 256-LBGA (FBGA-256, 1 mm pitch) | 256-LBGA (FBGA-256, 1 mm pitch) | 256-LBGA (FBGA-256, 1 mm pitch) | 256-LBGA (FBGA-256, 1 mm pitch) | 256-LBGA (FBGA-256, 1 mm pitch) |
| System Gates | 600,000 gates | 600,000 gates | 600,000 gates | 600,000 gates | 600,000 gates | 600,000 gates |
关键差异点
- Higher verified operating-temperature ceiling （对比 AFS600-FG256I)
- Extended-temperature identity while retaining the 600K AFS600 architecture （对比 AFS600-FGG256I)
- Nonvolatile configuration without a separate configuration loader （对比 M1AFS600-1FG256)
- Mixed-signal integration in a compact 256-ball package （对比 M1AFS600-1FGG256I)
设计说明
Treat the 1 mm-pitch 256-LBGA as a high-density routing constraint. Follow the manufacturer's recommended land pattern, escape-routing layers, via rules, solder-mask definition, and paste stencil geometry rather than deriving them from the generic BGA package name. Keep the 1.5 V supply and ground distribution planes continuous under the device, place local decoupling at the corresponding power balls, and route sensitive clock or analog nets away from switching and high-current return paths.
The verified data confirms a 1.5 V supply but does not provide core current, quiescent current, I/O current, or power-up sequencing limits. Do not size the supply from an assumed FPGA utilization. Estimate worst-case consumption from the manufacturer power tables for the actual clock rate, I/O activity, logic utilization, and selected temperature grade, then add regulator headroom and verify startup behavior across all power rails. The tier prices remain quote-required because no verified unit pricing was supplied.
Do not treat every AFS600 ordering code as automatically interchangeable. The verified data distinguishes the target's 0°C-to-85°C range from AFS600-FG256I's 0°C-to-70°C range, and the cross-reference results contain multiple M1 and FGG ordering attributes. Before substitution, compare the complete manufacturer ordering table, speed grade, temperature grade, package revision, qualification status, timing constraints, and pin definitions. Also note that a functional-equivalent listing is not itself proof of programming-file, bitstream, or system-level compatibility.
Calculate thermal performance from actual board construction and device utilization rather than from the package name alone. The supplied data identifies a 100°C junction test condition but provides no junction-temperature limit, thermal resistance, or power-loss table. Use the manufacturer thermal model with the selected package, ambient temperature, airflow, PCB copper, and neighboring heat sources. Validate that adjacent components also remain within their ratings during sustained maximum-activity operation.
合规信息
The supplied data does not explicitly state RoHS, REACH, lead-free, halogen-free, conflict-minerals, or AEC-Q100 status. The standard AFS600-1FG256I is therefore not presented as AEC-Q100 qualified; M1 ordering variants require their own qualification records.
