ATSAMD20J17A-MU - 48MHz Cortex-M0+ MCU | Microchip
部品番号: ATSAMD20J17A-MU ✓ 生産中ATSAMD20J17A-MU 概要
A microcontroller is a programmable semiconductor that combines a processor core, nonvolatile program memory, volatile data memory, and peripherals on one integrated circuit. The ATSAMD20J17 belongs to the SAM D20 family of ARM Cortex-M0+ microcontrollers, a subset of 32-bit embedded processors within the broader semiconductor and embedded-control device hierarchy. Its balance of processing performance, memory, analog conversion resources, and compact packaging supports cost-sensitive designs requiring more capability than a simple 8-bit controller.
Key features include 48 MHz maximum operating frequency, 128 KB flash, 16 KB SRAM, 12-bit analog-to-digital conversion, 10-bit digital-to-analog conversion, and support for operating voltages of 1.8 V, 2.5 V, or 3.3 V. The integrated analog resources can reduce external component requirements in sensing and control systems. A 256-channel PTC peripheral is particularly useful for resistive touch detection, while the real-time clock supports timekeeping and periodic event scheduling.
The SAM D20 architecture provides a high-performance ARM Cortex-M0+ core with efficient embedded processing and extensive peripheral integration. The ATSAMD20J17 is identified by Microchip as a low-power, high-performance device intended for home automation, consumer, metering, and industrial applications. The factory-programmable ordering option shown for ATSAMD20J17A-MU can also support application-specific configuration requirements.
Typical uses include energy meters, industrial sensor nodes, home-automation controllers, consumer controls, touch interfaces, and compact embedded monitoring systems. The 64-QFN package saves board area, while the integrated ADC, DAC, touch peripheral, and RTC reduce the need for separate analog or timing components. Firmware development can be handled within the Microchip development ecosystem supported by the SAM D20 family documentation.
PCB design should account for the exposed pad and its thermal and electrical requirements, maintain short analog and digital return paths, and follow the manufacturer land-pattern and decoupling guidance. Because this exact suffix is factory programmable, engineers should confirm the programmed configuration, exposed-pad treatment, pin assignments, and programming requirements before releasing a production PCB.
ドロップイン代替品: ATSAMD20J17A-MU — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: ATSAMD20J17A-MU (同一形状・フットプリント) — 相違点: Package.
ATSAMD21J17A-MFT
✅ ドロップイン📋 参考代替品(カタログ未掲載)
ATSAMC21J17A-MUT
✅ ドロップイン📋 参考代替品(カタログ未掲載)
ATSAMD20J17A-MU 最大定格&電気的特性
| Product Type | 32-bit ARM Cortex-M0+ flash microcontroller |
| Maximum CPU Frequency | 48 MHz |
| Flash Memory | 128 KB |
| SRAM | 16 KB |
| ADC Resolution | 12-bit |
| DAC Resolution | 10-bit |
| PTC Touch Channels | 256 channels |
| RTC | Integrated real-time clock |
| Operating Supply Options | 1.8 V, 2.5 V, or 3.3 V |
| Processor Core | Arm Cortex-M0+ |
| Architecture | 32-bit RISC |
| Program Memory Organization | 128K × 8 bits |
| パッケージ | 64-QFN, 9 mm × 9 mm |
| 実装タイプ | Surface mount |
| Exposed Pad | Present in 64-QFN package |
| Programming | Factory programmable |
| ピン数 | 64 pins |
ATSAMD20J17A-MU 64-qfn, 9 mm × 9 mm ピン配置ガイド
ATSAMD20J17A-MU (64-qfn, 9 mm × 9 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: ATSAMD20J17A-MU.
詳細は データシート をご参照ください。
主な用途
ATSAMD20J17A-MU の用途: 6 件s: Smart Energy Metering, Industrial Sensor Node, Home Automation Controller, Consumer Touch Interface, Battery-Powered Monitor, Programmable Control Module.
Smart Energy Metering
The ATSAMD20J17A-MU fits metering designs that combine periodic measurement, local timekeeping, and low-power embedded control. Its 48 MHz Cortex-M0+ core can process acquisition and communication tasks, while 128 KB of flash supports firmware, calibration tables, and configuration data. The 16 KB SRAM provides working space for buffers, and the 12-bit ADC supports higher-resolution sensing than an 8-bit interface. The integrated RTC can timestamp samples and schedule metering intervals without an external clock. Firmware should still implement calibration, filtering, and tamper-detection logic appropriate to the metrology class.
おすすめ
Industrial Sensor Node
The ATSAMD20J17A-MU is well suited to compact industrial sensor nodes that must acquire analog data and respond locally. Its 48 MHz processor supports filtering, diagnostics, and protocol handling, while the 12-bit ADC reduces demand for a separate high-resolution converter in suitable measurement chains. The 256-channel PTC peripheral can support resistive touch or panel functions where required. Use the 1.8 V, 2.5 V, or 3.3 V operating options to match the wider system, and verify the final temperature and industrial qualification requirements during component selection.
おすすめ
Home Automation Controller
The ATSAMD20J17A-MU can consolidate multiple functions in a home-automation controller, including touch controls, analog sensing, timing, and local actuator management. Its 128 KB flash accommodates embedded firmware and configuration, while the 16 KB SRAM supports message buffers and state management. The integrated 10-bit DAC can provide an analog reference or test signal, and the RTC can maintain schedule information. For connected products, pair the controller with a suitable communications interface and validate timing margins under worst-case radio activity and power-supply variation.
おすすめ
Consumer Touch Interface
The ATSAMD20J17A-MU enables a compact consumer touch interface by combining its 256-channel PTC peripheral with a 48 MHz control core. The CPU can scan touch inputs, apply debounce and calibration, update indicators, and communicate with the host product. The 12-bit ADC and 10-bit DAC can support analog controls or a test and bias path when the product design needs them. The 64-QFN 9 mm × 9 mm package helps preserve board area, although the exposed pad requires careful land-pattern implementation and adequate copper thermal support.
おすすめ
Battery-Powered Monitor
The ATSAMD20J17A-MU is appropriate for battery-powered monitoring equipment that needs periodic sensing, local decision-making, and low standby overhead. Its low-power Cortex-M0+ architecture and selectable 1.8 V, 2.5 V, or 3.3 V operation can simplify integration with low-voltage sensor networks. The 16 KB SRAM is adequate for short data frames and protocol state, while 128 KB of flash supports event logic and firmware updates. Power-budget calculations should include the MCU operating mode, ADC sampling strategy, external pull networks, and any communication subsystem.
おすすめ
Programmable Control Module
The ATSAMD20J17A-MU works well as the control core of a programmable module combining embedded logic, analog I/O, timing, and touch input. Factory programming permits application-specific configuration, and the ATSAMD20J17A-MU order code is listed by Microchip for this purpose. The 48 MHz core provides adequate responsiveness for control loops and peripheral coordination, while the 128 KB flash and 16 KB SRAM provide useful headroom. Before production release, confirm the programmed configuration, package pin assignments, boot behavior, and firmware update method.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: ATSAMD20J17A-MU — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | ATSAMD21J17A-MFT | ATSAMC21J17A-MUT |
|---|---|---|---|
| Package | 64-QFN (9x9) | 64-QFN (9x9) | 64-pin VQFN |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Processor Core | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ |
主な差別化要因
- Factory-programmable exact order code (vs ATSAMD21J17A-MFT)
- Documented analog and touch integration (vs ATSAMC21J17A-MUT)
- Automotive-grade alternative for harsh-temperature designs (vs ATSAMD20J17A-MU)
設計ノート
Implement the manufacturer land pattern for the 64-QFN 9 mm × 9 mm package and verify pin 1 orientation against the package drawing. The exposed pad must be connected according to the recommended PCB stack-up and schematic. Avoid routing high-speed or noisy switching nodes beneath the device, and place decoupling capacitors close to the associated supply and ground pins to minimize supply-loop area.
Treat analog inputs and references as sensitive nodes in precision measurement designs. Route the ATSAMD20J17A-MU analog signals away from digital clocks and switching-regulator nodes, use a continuous ground reference where practical, and obtain ADC settling and filtering requirements from the manufacturer datasheet. For resistive touch sensing, follow the recommended electrode, scan, filtering, and calibration approach instead of relying on unvalidated threshold settings.
Do not assume that equal package dimensions guarantee a drop-in replacement. Before substituting ATSAMD21J17A-MFT or ATSAMC21J17A-MUT, compare every pin name, alternate-function mapping, supply requirement, startup state, ADC and DAC behavior, clock limits, programming interface, and exposed-pad connection. ATSAMD20J17A-MU is factory programmable, so verify that the programmed configuration can be reproduced before approving a substitution.
Budget the MCU rail across active, sleep, and shutdown operating modes instead of using current consumption at the 48 MHz peak alone. The 1.8 V, 2.5 V, and 3.3 V options allow alignment with the system, but peripheral accuracy, clocking, flash programming, and brownout behavior must remain valid at the selected voltage. Use the manufacturer power-management guidance to configure clock dividers, peripherals, and sleep states for the required response time.
コンプライアンス情報
The ATSAMC21J17A-MUT alternative is identified as AEC-Q100 Grade 1 qualified from -40°C to 125°C. No compliance declaration for ATSAMD20J17A-MU is stated in the cited product results.