ATTINY1626-SU - 20MHz AVR MCU, 16KB Flash | Microchip
部品番号: ATTINY1626-SU ✓ 生産中ATTINY1626-SU 概要
An 8-bit microcontroller is a programmable semiconductor that integrates a CPU core, memory, and peripherals into one device. The ATTINY1626 belongs to the tinyAVR 2 family, where the AVR CPU and hardware multiplier execute compact control code while serial interfaces and event-driven peripherals reduce the need for additional discrete components. Its position within the broader hierarchy is microcontroller IC, embedded processor, and general-purpose semiconductor.
Key device resources include a 20 MHz maximum clock rate, 16 KB of program Flash, 2 KB of SRAM, and 256 bytes of nonvolatile EEPROM. The 20-pin SOIC package supports digital I/O, communication interfaces, and analog measurement functions. This combination makes the part appropriate for compact industrial controls, sensor nodes, embedded instruments, and connected peripheral designs where board area and peripheral integration are important.
The tinyAVR 2 architecture combines the AVR CPU with hardware multiplier support, Event System functionality, advanced digital peripherals, and configurable custom logic. The integrated peripherals allow software to coordinate peripheral events without excessive polling, while the hardware multiplier accelerates suitable arithmetic operations. Compared with a larger general-purpose MCU, the ATTINY1626 offers a focused resource set in a smaller 20-pin footprint.
Typical applications include building controls, compact motor controllers, battery-powered sensor interfaces, serial bridges, programmable logic controllers, and small laboratory instruments. I2C and SPI support allow connection to sensors, memories, and display or communication modules, while UART/USART provides a straightforward path to host controllers. Designers should match peripheral assignments, package pins, voltage limits, and clock requirements before finalizing a PCB layout.
Place decoupling capacitors close to the supply and ground pins, route high-current and sensitive analog paths deliberately, and confirm the selected external clock or internal oscillator configuration in the manufacturer datasheet. Adequate flash and SRAM headroom is essential when adding protocol libraries, bootloader functions, or event-heavy control logic.
This product record combines the manufacturer device information with component-level comparison, sourcing guidance, and practical design considerations. It also identifies verified drop-in candidates while distinguishing genuine same-package options from relatives that require a different footprint or package.
ドロップイン代替品: ATTINY1626-SU — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: ATTINY1626-SU (同一形状・フットプリント) — 相違点: EEPROM, Event System, Operating Temperature, Package.
ATTINY1626-XU
✅ ドロップイン価格はお問い合わせください
データシートを見る →ATTINY1606-SF
✅ ドロップイン📋 参考代替品(カタログ未掲載)
ATTINY1626-SU 最大定格&電気的特性
| Product Type | 8-bit AVR tinyAVR 2 microcontroller |
| Maximum CPU Frequency | 20 MHz |
| CPU Core | AVR with hardware multiplier |
| Flash Memory | 16 KB |
| SRAM | 2 KB |
| EEPROM | 256 bytes |
| パッケージ | 20-pin SOIC |
| I2C Support | Yes |
| SPI Support | Yes |
| UART/USART Support | Yes |
| ADC Resolution | 12-bit differential ADC |
| Configurable Custom Logic | Yes |
| Event System | Yes |
| 動作温度 | -40°C to +85°C |
| 実装タイプ | Surface mount |
ATTINY1626-SU 20-pin soic ピン配置ガイド
ATTINY1626-SU (20-pin soic パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: ATTINY1626-SU.
詳細は データシート をご参照ください。
主な用途
ATTINY1626-SU の用途: 6 件s: Industrial Sensor Node, Programmable Logic Controller, Serial Communication Bridge, Compact Motor Controller, Battery-Powered Monitoring Device, Embedded Test and Measurement.
Industrial Sensor Node
The ATTINY1626-SU fits compact industrial sensor nodes that must acquire analog measurements and communicate with a host or neighboring controller. Its 12-bit differential ADC supports differential analog measurement, while I2C and SPI provide options for connecting sensors, memory, and digital peripherals. The 20 MHz AVR core gives firmware room for calibration, filtering, diagnostics, and protocol handling within the 16 KB Flash limit. Its -40°C to +85°C rating is appropriate for controlled industrial equipment. The practical trade-off is limited SRAM: complex buffering, display libraries, or multiple concurrent protocol stacks may exhaust the available 2 KB, so application buffering should be reviewed before firmware expansion.
おすすめ
Programmable Logic Controller
The ATTINY1626-SU is useful in small programmable logic controllers because Configurable Custom Logic and the Event System can implement timed or event-driven behavior alongside ordinary AVR firmware. Multiple serial interfaces allow the controller to connect to sensor modules, operator interfaces, or supervisory equipment without requiring several separate interface ICs. With 16 KB Flash, 2 KB SRAM, and 256 bytes of EEPROM, it is best suited to compact control loops rather than large PLC workloads. Firmware should reserve memory for communications and diagnostics, while the board design should provide stable regulation and place decoupling close to the supply pins.
おすすめ
Serial Communication Bridge
The ATTINY1626-SU can act as a compact serial bridge because it supports I2C, SPI, and UART/USART within a 20-pin SOIC package. Firmware can translate between a host UART and an I2C or SPI peripheral while the hardware multiplier accelerates appropriate arithmetic in protocol and data-processing routines. The 20 MHz operating speed provides ample margin for common embedded serial rates and moderate protocol overhead. For high-throughput transfers, interrupt-driven serial handling and careful buffer allocation are important because only 2 KB of SRAM is available. The exact peripheral multiplexing must be checked against the selected 20-pin assignments.
おすすめ
Compact Motor Controller
The ATTINY1626-SU is suitable for small motor-control and actuator modules where a 20-pin package, fast execution, and integrated analog and logic peripherals are valuable. The 12-bit differential ADC can monitor a current or position signal, while Configurable Custom Logic can help capture or coordinate signals outside the main CPU loop. I2C and SPI permit connection to position sensors, gate drivers, or supervisory controllers, and UART/USART supports configuration and telemetry. Firmware and PCB design must account for the device's limited 2 KB SRAM and ensure that switching-node noise is controlled before relying on differential ADC accuracy.
おすすめ
Battery-Powered Monitoring Device
The ATTINY1626-SU can serve as the controller in a battery-powered monitoring device where periodic measurement, event handling, and low-power communication are more important than continuous high-throughput processing. The 20 MHz AVR core allows quick acquisition and filtering between low-power sleep intervals, while EEPROM retains 256 bytes of calibration or configuration information. Serial interfaces permit attachment to environmental, current, or wearable sensors. The designer should verify the exact active and sleep current from the operating conditions section of the family data sheet, because those figures determine whether the system meets its battery-life target.
おすすめ
Embedded Test and Measurement
The ATTINY1626-SU is appropriate for compact embedded test and measurement products that combine signal capture, control, and host communication in one package. Its 12-bit differential ADC supports analog measurement, Configurable Custom Logic can assist with deterministic input handling, and UART/USART provides a simple connection to a computer or embedded display. The 20 MHz AVR processor executes measurement setup and control routines from the available 16 KB Flash memory. The main constraints are analog front-end design, calibration storage, and the 2 KB SRAM limit. These factors must be addressed together because digital conversion accuracy alone does not determine the accuracy of the complete instrument.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: ATTINY1626-SU — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | ATTINY1626 | ATTINY1606-SF |
|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 20-pin SOIC | 20-pin SOIC option | 20-pin PDSO |
| CPU Architecture | 8-bit AVR with hardware multiplier | 8-bit AVR with hardware multiplier | 8-bit AVR |
| Maximum Clock Frequency | 20 MHz | 20 MHz | 20 MHz |
主な差別化要因
- Configurable peripheral integration in a 20-pin SOIC (vs ATTINY1606-SF)
- Differential analog conversion (vs ATTINY1606-SF)
- Serial connectivity without external interface controllers (vs ATTINY1606-SF)
- Balanced memory configuration for embedded control (vs ATTINY1606-SF)
設計ノート
Place the supply bypass capacitor directly between the appropriate power and ground pins, with a short return path that avoids switching-current loops. Treat the analog, digital, and communication sections as separate return regions where the board layout permits. The differential ADC and configurable logic can reduce software overhead, but their accuracy still depends on clean reference routing, controlled ground impedance, and separating noisy actuator drive paths from measurement inputs.
Confirm the regulator's output voltage, startup behavior, and load transient response against the operating requirements of the ATTINY1626-SU. The MCU supports communication and analog activity at up to 20 MHz, so supply integrity becomes more important when digital outputs switch quickly. Include local decoupling and avoid routing motor, relay, or power-converter return current beneath the analog input region. Validate brownout and power-sequencing behavior with the intended system load rather than only at idle.
Do not assume that every 20-pin AVR controller is pin-compatible with the ATTINY1626-SU. Verify the exact pin names, alternate-function assignments, power pins, ADC channels, communication pins, programming interface, and reset behavior in the manufacturer pin-description table. Pay particular attention to the limited 2 KB SRAM when adding libraries, and use the 256-byte EEPROM for settings that must persist without occupying RAM.
コンプライアンス情報
Compliance status was not explicitly established for the exact ATTINY1626-SU ordering code in the manufacturer or distributor information used for this record.