Microchip Technology

ATTINY1626-SU - 20MHz AVR MCU, 16KB Flash | Microchip

N.º da peça: ATTINY1626-SU ✓ Ativo
20-pin SOIC Package 20 MHz Speed 16 KB Memory
MOQ: 1 |

ATTINY1626-SU Visão geral

The Microchip Technology ATTINY1626-SU is an 8-bit AVR tinyAVR 2 microcontroller operating up to 20 MHz, with 16 KB Flash memory, 2 KB SRAM, and 256 bytes of EEPROM in a 20-pin SOIC package. The device integrates I2C, SPI, and UART/USART connectivity, together with analog and configurable custom logic peripherals for compact embedded-control designs.

An 8-bit microcontroller is a programmable semiconductor that integrates a CPU core, memory, and peripherals into one device. The ATTINY1626 belongs to the tinyAVR 2 family, where the AVR CPU and hardware multiplier execute compact control code while serial interfaces and event-driven peripherals reduce the need for additional discrete components. Its position within the broader hierarchy is microcontroller IC, embedded processor, and general-purpose semiconductor.

Key device resources include a 20 MHz maximum clock rate, 16 KB of program Flash, 2 KB of SRAM, and 256 bytes of nonvolatile EEPROM. The 20-pin SOIC package supports digital I/O, communication interfaces, and analog measurement functions. This combination makes the part appropriate for compact industrial controls, sensor nodes, embedded instruments, and connected peripheral designs where board area and peripheral integration are important.

The tinyAVR 2 architecture combines the AVR CPU with hardware multiplier support, Event System functionality, advanced digital peripherals, and configurable custom logic. The integrated peripherals allow software to coordinate peripheral events without excessive polling, while the hardware multiplier accelerates suitable arithmetic operations. Compared with a larger general-purpose MCU, the ATTINY1626 offers a focused resource set in a smaller 20-pin footprint.

Typical applications include building controls, compact motor controllers, battery-powered sensor interfaces, serial bridges, programmable logic controllers, and small laboratory instruments. I2C and SPI support allow connection to sensors, memories, and display or communication modules, while UART/USART provides a straightforward path to host controllers. Designers should match peripheral assignments, package pins, voltage limits, and clock requirements before finalizing a PCB layout.

Place decoupling capacitors close to the supply and ground pins, route high-current and sensitive analog paths deliberately, and confirm the selected external clock or internal oscillator configuration in the manufacturer datasheet. Adequate flash and SRAM headroom is essential when adding protocol libraries, bootloader functions, or event-heavy control logic.

This product record combines the manufacturer device information with component-level comparison, sourcing guidance, and practical design considerations. It also identifies verified drop-in candidates while distinguishing genuine same-package options from relatives that require a different footprint or package.

Alternativas drop-in para ATTINY1626-SU — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com ATTINY1626-SU (mesmo formato e footprint) — diferindo em EEPROM, Event System, Operating Temperature, Package.

Microchip Technology
EEPROM: 256 B
Event System: Yes (asynchronous peripheral interconnect)
Operating Temperature: -40 C to +85 C (industrial)
Comparar com ATTINY1626-SU →

ATTINY1626-XU

✅ Drop-In
Microchip Technology
📦 20-pin SOIC
AVR RISC (8-bit) · tinyAVR 2 · 20 MHz · 16 KB · 2 KB · 256 B · 20-pin SSOP · 1.8 V to 5.5 V

Consulte o preço

Ver ficha técnica →

ATTINY1606-SF

✅ Drop-In
📦 20-pin SOIC
Retains an 8-bit 20 MHz AVR core in a 20-pin package, while Flash, SRAM, EEPROM, and peripheral resources require device-specific comparison

📋 Alternativa de referência (fora do catálogo)

ATTINY1626-SU Classificações máximas e características elétricas

Product Type 8-bit AVR tinyAVR 2 microcontroller
Maximum CPU Frequency 20 MHz
CPU Core AVR with hardware multiplier
Flash Memory 16 KB
SRAM 2 KB
EEPROM 256 bytes
Encapsulamento 20-pin SOIC
I2C Support Yes
SPI Support Yes
UART/USART Support Yes
ADC Resolution 12-bit differential ADC
Configurable Custom Logic Yes
Event System Yes
Temperatura de operação -40°C to +85°C
Tipo de montagem Surface mount

Guia de Configuração de Pinos do ATTINY1626-SU 20-pin soic

Configuração de pinos para ATTINY1626-SU (pacote 20-pin soic). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.

Diagrama de pinagem do pacote 20-pin soic para ATTINY1626-SU

Nenhum dado detalhado de pinagem disponível para ATTINY1626-SU.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

ATTINY1626-SU é adequado para 6 aplicaçãos: Industrial Sensor Node, Programmable Logic Controller, Serial Communication Bridge, Compact Motor Controller, Battery-Powered Monitoring Device, Embedded Test and Measurement.

🏭

Industrial Sensor Node

The ATTINY1626-SU fits compact industrial sensor nodes that must acquire analog measurements and communicate with a host or neighboring controller. Its 12-bit differential ADC supports differential analog measurement, while I2C and SPI provide options for connecting sensors, memory, and digital peripherals. The 20 MHz AVR core gives firmware room for calibration, filtering, diagnostics, and protocol handling within the 16 KB Flash limit. Its -40°C to +85°C rating is appropriate for controlled industrial equipment. The practical trade-off is limited SRAM: complex buffering, display libraries, or multiple concurrent protocol stacks may exhaust the available 2 KB, so application buffering should be reviewed before firmware expansion.

⚡

Programmable Logic Controller

The ATTINY1626-SU is useful in small programmable logic controllers because Configurable Custom Logic and the Event System can implement timed or event-driven behavior alongside ordinary AVR firmware. Multiple serial interfaces allow the controller to connect to sensor modules, operator interfaces, or supervisory equipment without requiring several separate interface ICs. With 16 KB Flash, 2 KB SRAM, and 256 bytes of EEPROM, it is best suited to compact control loops rather than large PLC workloads. Firmware should reserve memory for communications and diagnostics, while the board design should provide stable regulation and place decoupling close to the supply pins.

🌐

Serial Communication Bridge

The ATTINY1626-SU can act as a compact serial bridge because it supports I2C, SPI, and UART/USART within a 20-pin SOIC package. Firmware can translate between a host UART and an I2C or SPI peripheral while the hardware multiplier accelerates appropriate arithmetic in protocol and data-processing routines. The 20 MHz operating speed provides ample margin for common embedded serial rates and moderate protocol overhead. For high-throughput transfers, interrupt-driven serial handling and careful buffer allocation are important because only 2 KB of SRAM is available. The exact peripheral multiplexing must be checked against the selected 20-pin assignments.

🔧

Compact Motor Controller

The ATTINY1626-SU is suitable for small motor-control and actuator modules where a 20-pin package, fast execution, and integrated analog and logic peripherals are valuable. The 12-bit differential ADC can monitor a current or position signal, while Configurable Custom Logic can help capture or coordinate signals outside the main CPU loop. I2C and SPI permit connection to position sensors, gate drivers, or supervisory controllers, and UART/USART supports configuration and telemetry. Firmware and PCB design must account for the device's limited 2 KB SRAM and ensure that switching-node noise is controlled before relying on differential ADC accuracy.

📱

Battery-Powered Monitoring Device

The ATTINY1626-SU can serve as the controller in a battery-powered monitoring device where periodic measurement, event handling, and low-power communication are more important than continuous high-throughput processing. The 20 MHz AVR core allows quick acquisition and filtering between low-power sleep intervals, while EEPROM retains 256 bytes of calibration or configuration information. Serial interfaces permit attachment to environmental, current, or wearable sensors. The designer should verify the exact active and sleep current from the operating conditions section of the family data sheet, because those figures determine whether the system meets its battery-life target.

📺

Embedded Test and Measurement

The ATTINY1626-SU is appropriate for compact embedded test and measurement products that combine signal capture, control, and host communication in one package. Its 12-bit differential ADC supports analog measurement, Configurable Custom Logic can assist with deterministic input handling, and UART/USART provides a simple connection to a computer or embedded display. The 20 MHz AVR processor executes measurement setup and control routines from the available 16 KB Flash memory. The main constraints are analog front-end design, calibration storage, and the 2 KB SRAM limit. These factors must be addressed together because digital conversion accuracy alone does not determine the accuracy of the complete instrument.

Resumo dos produtos recomendados

ATTINY1626 Same-device family configuration Usado em: Industrial Sensor Node, Programmable Logic Controller, Serial Communication Bridge, Compact Motor Controller, Battery-Powered Monitoring Device, Embedded Test and Measurement ATTINY1606-SF 20-pin AVR controller alternative Usado em: Industrial Sensor Node, Programmable Logic Controller, Compact Motor Controller, Embedded Test and Measurement ATTINY1616-SN Related 20 MHz AVR controller candidate Usado em: Serial Communication Bridge, Battery-Powered Monitoring Device
What is the ATTINY1626-SU?
The ATTINY1626-SU is a Microchip Technology 8-bit AVR tinyAVR 2 microcontroller rated for operation up to 20 MHz. It provides 16 KB of Flash, 2 KB of SRAM, and 256 bytes of EEPROM in a 20-pin SOIC package. According to the Microchip ATtiny1624/1626/1627 data sheet, the device also supports I2C, SPI, and UART/USART and includes a hardware multiplier, Event System, and Configurable Custom Logic.
What are the key specifications of ATTINY1626-SU that engineers should know?
The ATTINY1626-SU combines a 20 MHz AVR 8-bit core with 16 KB of Flash, 2 KB of SRAM, and 256 bytes of EEPROM. The 20-pin SOIC version supports I2C, SPI, and UART/USART, while the device integrates a 12-bit differential ADC, Event System, and Configurable Custom Logic. These resources make it suitable for compact embedded controllers that need serial connectivity and deterministic peripheral interaction in a 20-pin surface-mount package.
Where can I download the ATTINY1626-SU datasheet PDF?
The official ATTINY1626-SU datasheet is available through Microchip Technology as part of the ATtiny1624/1626/1627 family data sheet. Download document DS40002234B from the Microchip document link on this page, then use the package-specific pin description, electrical characteristics, and memory sections for the ATTINY1626-SU ordering code. The manufacturer product page for ATTINY1626 provides the associated package and documentation links.
Where can I find the ATTINY1626-SU pinout?
The ATTINY1626-SU pinout is documented in the pin-description section of the Microchip ATtiny1624/1626/1627 data sheet DS40002234B. The part is a 20-pin SOIC device, so use the SOIC-20 pin diagram and verify every signal against the selected peripheral configuration. Request the Request a Quote form on this page if you need manufacturer documentation or current availability support for the exact ordering code.
How do I program the ATTINY1626-SU?
Program the ATTINY1626-SU through the AVR programming interface using an ISP-compatible programmer and the device settings supported by the Microchip programming toolchain. The MCU provides 16 KB of Flash for application code and 256 bytes of EEPROM for nonvolatile parameter storage. The exact clock, fuse, signature, and programming-voltage requirements must be confirmed in the Microchip data sheet before connecting a programmer.
Can ATTINY1626-SU be used with Arduino?
The ATTINY1626-SU can be used in Arduino-compatible embedded projects when the board definition, programmer, clock configuration, and peripheral pin assignments are prepared for the tinyAVR 2 device. Its AVR instruction architecture supports familiar embedded-control workflows, but software support must explicitly target ATTINY1626 rather than treating it as a generic ATmega328P. Confirm programmer connectivity and package-level pin assignments before applying power.
Is the ATTINY1626-SU suitable for sensor and IoT nodes?
The ATTINY1626-SU is suitable for compact sensor and IoT nodes because it combines a 20 MHz AVR core, I2C, SPI, UART/USART, and a 12-bit differential ADC in a 20-pin SOIC package. It can measure analog inputs and coordinate connected sensors while keeping firmware within the available 16 KB of Flash. Low-power operating conditions, standby behavior, and the analog input range should be checked against the node's duty cycle and measurement accuracy.
ATTINY1626-SU vs ATTINY1606-SF - which is better for a compact controller?
The ATTINY1626-SU is the better choice when a design requires the tinyAVR 2 feature set, including Event System, Configurable Custom Logic, and a 12-bit differential ADC. ATTINY1606-SF is listed as a 20-pin, 20 MHz, 8-bit AVR alternative, but its detailed memory and peripheral differences must be checked before substitution. Both use 20-pin-class packages, yet pin-level peripheral compatibility still requires datasheet verification.
What is the difference between ATTINY1626-SU and ATTINY1626?
ATTINY1626-SU identifies the 20-pin SOIC ordering configuration of the ATTINY1626 family, while ATTINY1626 is the broader family designation offered in several packages. The ATTINY1626 family uses the same 20 MHz AVR core with a hardware multiplier, 16 KB Flash, 2 KB SRAM, and 256 bytes of EEPROM. Package-specific pin availability and suffix interpretation must be confirmed before treating the base family name as a board-level drop-in part.
When should I choose ATTINY1626-SU over another tinyAVR device?
Choose ATTINY1626-SU when a 20-pin SOIC design needs the combination of a 20 MHz AVR core, 16 KB Flash, 2 KB SRAM, 256 bytes of EEPROM, serial connectivity, and configurable peripheral logic. Select another tinyAVR member only when its package pins, memory capacity, analog block, communication peripherals, or operating conditions provide a closer match. This part is especially appropriate when enough I/O is needed for multiple sensors or serial devices without moving to a larger package.
Is ATTINY1626-SU suitable for a 20-pin SOIC industrial control board?
The ATTINY1626-SU is suitable for many 20-pin SOIC industrial-control boards because it combines serial interfaces, a differential ADC, configurable logic, and an event system in a compact package. Its -40°C to +85°C industrial temperature range supports controlled indoor equipment. Before release, verify supply-voltage limits, pin multiplexing, ADC accuracy, ESD strategy, isolation requirements, and regulator headroom for the actual load.
What is the best drop-in replacement for ATTINY1626-SU?
The closest verified same-package replacement candidate is ATTINY1606-SF, which is described as a 20-pin, 20 MHz, 8-bit AVR microcontroller, but it is not an identical functional substitute. A replacement should be approved only after checking pin functions, Flash and SRAM requirements, EEPROM capacity, voltage, peripherals, and programming compatibility. Use the Request a Quote form on this page when confirming replacement availability rather than assuming a cross-family part is electrically interchangeable.
Can ATTINY1626-SU replace ATTINY1626-SFR?
ATTINY1626-SU and ATTINY1626-SFR are the same Microchip device family with different shipping formats, but that difference alone does not make one a universal substitute for the other. The ATTINY1626-SU ordering code uses the 20-pin SOIC configuration, while ATTINY1626-SFR is identified as tape-and-reel packaging. Check the complete ordering code, pin configuration, and assembly requirements before interchange.
Where to buy ATTINY1626-SU online?
Use the Request a Quote form on this page to request ATTINY1626-SU availability, current commercial terms, and quantity support. The exact MPN is a 20-pin SOIC, 20 MHz, 16 KB Flash AVR tinyAVR 2 microcontroller, so confirm that the requested suffix is ATTINY1626-SU rather than another package or reel configuration. A single MPN check helps prevent mismatched 20-pin variants from entering the purchasing process.
What is the price of ATTINY1626-SU?
Current commercial pricing for ATTINY1626-SU is presented through the Request a Quote form on this page. The form supports quantity-specific sourcing while keeping pricing aligned with the exact 20-pin SOIC ordering code. Buyers should include target quantity, delivery location, and production schedule when requesting terms so the quotation reflects the intended assembly and schedule.
What is the lead time and stock status for ATTINY1626-SU?
Current lead time and stock status should be requested through the Request a Quote form on this page because they can change with inventory and production conditions. Specify the required ATTINY1626-SU quantity, SOIC package requirement, and target delivery date. The ATTINY1626 family is listed as active, but a quotation is the appropriate mechanism for confirming lot availability and committed delivery.

Dados de referência de engenharia para ATTINY1626-SU — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose ATTINY1626-SU when the design needs a 20-pin SOIC microcontroller with a 20 MHz AVR core, 16 KB Flash, 2 KB SRAM, 256 bytes of EEPROM, I2C, SPI, UART/USART, a 12-bit differential ADC, Event System, and Configurable Custom Logic. It is particularly effective for compact industrial controllers, serial bridges, sensor nodes, and embedded instruments where the 2 KB SRAM limit remains manageable. ATTINY1626 may represent the same family when the base ordering designation is sufficient, but the package suffix must be confirmed. ATTINY1606-SF can fit a 20-pin, 20 MHz AVR control design, but it should be selected only after checking memory, peripheral, ADC, voltage, and pin compatibility. Do not choose a replacement based only on package and clock rate; the functional difference can alter firmware and board wiring.

Comparação com alternativas

Parâmetro Este produto ATTINY1626 ATTINY1606-SF
Brand Microchip Technology Microchip Technology Microchip Technology
Package 20-pin SOIC 20-pin SOIC option 20-pin PDSO
CPU Architecture 8-bit AVR with hardware multiplier 8-bit AVR with hardware multiplier 8-bit AVR
Maximum Clock Frequency 20 MHz 20 MHz 20 MHz

Principais diferenciais

  • Configurable peripheral integration in a 20-pin SOIC (vs ATTINY1606-SF)
  • Differential analog conversion (vs ATTINY1606-SF)
  • Serial connectivity without external interface controllers (vs ATTINY1606-SF)
  • Balanced memory configuration for embedded control (vs ATTINY1606-SF)

Notas de projeto

Place the supply bypass capacitor directly between the appropriate power and ground pins, with a short return path that avoids switching-current loops. Treat the analog, digital, and communication sections as separate return regions where the board layout permits. The differential ADC and configurable logic can reduce software overhead, but their accuracy still depends on clean reference routing, controlled ground impedance, and separating noisy actuator drive paths from measurement inputs.

Confirm the regulator's output voltage, startup behavior, and load transient response against the operating requirements of the ATTINY1626-SU. The MCU supports communication and analog activity at up to 20 MHz, so supply integrity becomes more important when digital outputs switch quickly. Include local decoupling and avoid routing motor, relay, or power-converter return current beneath the analog input region. Validate brownout and power-sequencing behavior with the intended system load rather than only at idle.

Do not assume that every 20-pin AVR controller is pin-compatible with the ATTINY1626-SU. Verify the exact pin names, alternate-function assignments, power pins, ADC channels, communication pins, programming interface, and reset behavior in the manufacturer pin-description table. Pay particular attention to the limited 2 KB SRAM when adding libraries, and use the 256-byte EEPROM for settings that must persist without occupying RAM.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

Compliance status was not explicitly established for the exact ATTINY1626-SU ordering code in the manufacturer or distributor information used for this record.

Buscas relacionadas

attiny1626 datasheet attiny1626 microcontroller attiny1626 development board attiny1626 arduino attiny1626 programming ATTINY1626-SU datasheet pdf ATTINY1626-SU pinout ATTINY1626-SU equivalent ATTINY1626-SU replacement ATTINY1626-SU vs ATTINY1606-SF ATTINY1626-SU price ATTINY1626-SU stock Microchip ATTINY1626-SU

Componentes & termos relacionados

Microchip Technology ATTINY1626-SU ATTINY1626 ATTINY1606-SF ATTINY1616-SN AVR CPU tinyAVR 2 8-bit microcontroller microcontroller IC embedded processor semiconductor hardware multiplier I2C SPI UART/USART 12-bit differential ADC Configurable Custom Logic Event System 16 KB Flash 2 KB SRAM 256-byte EEPROM SOIC-20 QFN family surface mount SMD
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ