ATTINY1626-SU - 20MHz AVR MCU, 16KB Flash | Microchip
MPN: ATTINY1626-SU ✓ NakahandaATTINY1626-SU Ulas
An 8-bit microcontroller is a programmable semiconductor that integrates a CPU core, memory, and peripherals into one device. The ATTINY1626 belongs to the tinyAVR 2 family, where the AVR CPU and hardware multiplier execute compact control code while serial interfaces and event-driven peripherals reduce the need for additional discrete components. Its position within the broader hierarchy is microcontroller IC, embedded processor, and general-purpose semiconductor.
Key device resources include a 20 MHz maximum clock rate, 16 KB of program Flash, 2 KB of SRAM, and 256 bytes of nonvolatile EEPROM. The 20-pin SOIC package supports digital I/O, communication interfaces, and analog measurement functions. This combination makes the part appropriate for compact industrial controls, sensor nodes, embedded instruments, and connected peripheral designs where board area and peripheral integration are important.
The tinyAVR 2 architecture combines the AVR CPU with hardware multiplier support, Event System functionality, advanced digital peripherals, and configurable custom logic. The integrated peripherals allow software to coordinate peripheral events without excessive polling, while the hardware multiplier accelerates suitable arithmetic operations. Compared with a larger general-purpose MCU, the ATTINY1626 offers a focused resource set in a smaller 20-pin footprint.
Typical applications include building controls, compact motor controllers, battery-powered sensor interfaces, serial bridges, programmable logic controllers, and small laboratory instruments. I2C and SPI support allow connection to sensors, memories, and display or communication modules, while UART/USART provides a straightforward path to host controllers. Designers should match peripheral assignments, package pins, voltage limits, and clock requirements before finalizing a PCB layout.
Place decoupling capacitors close to the supply and ground pins, route high-current and sensitive analog paths deliberately, and confirm the selected external clock or internal oscillator configuration in the manufacturer datasheet. Adequate flash and SRAM headroom is essential when adding protocol libraries, bootloader functions, or event-heavy control logic.
This product record combines the manufacturer device information with component-level comparison, sourcing guidance, and practical design considerations. It also identifies verified drop-in candidates while distinguishing genuine same-package options from relatives that require a different footprint or package.
Mga alternatibo na pwedeng ilagay na ATTINY1626-SU — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok ATTINY1626-SU (parehas na form factor at footprint) — pagkakaiba sa EEPROM, Event System, Operating Temperature, Package.
ATTINY1626-XU
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →ATTINY1606-SF
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
ATTINY1626-SU Mga Pinakamataas na Rating at Electrical Characteristics
| Product Type | 8-bit AVR tinyAVR 2 microcontroller |
| Maximum CPU Frequency | 20 MHz |
| CPU Core | AVR with hardware multiplier |
| Flash Memory | 16 KB |
| SRAM | 2 KB |
| EEPROM | 256 bytes |
| Packhaging | 20-pin SOIC |
| I2C Support | Yes |
| SPI Support | Yes |
| UART/USART Support | Yes |
| ADC Resolution | 12-bit differential ADC |
| Configurable Custom Logic | Yes |
| Event System | Yes |
| Temperature na Operasyon | -40°C to +85°C |
| Uri ng Pagpapasok | Surface mount |
Gabay sa Pin Configuration ng ATTINY1626-SU 20-pin soic
Pin configuration para sa ATTINY1626-SU (20-pin soic package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa ATTINY1626-SU.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
ATTINY1626-SU ay nararapat para sa 6 aplikasyons: Industrial Sensor Node, Programmable Logic Controller, Serial Communication Bridge, Compact Motor Controller, Battery-Powered Monitoring Device, Embedded Test and Measurement.
Industrial Sensor Node
The ATTINY1626-SU fits compact industrial sensor nodes that must acquire analog measurements and communicate with a host or neighboring controller. Its 12-bit differential ADC supports differential analog measurement, while I2C and SPI provide options for connecting sensors, memory, and digital peripherals. The 20 MHz AVR core gives firmware room for calibration, filtering, diagnostics, and protocol handling within the 16 KB Flash limit. Its -40°C to +85°C rating is appropriate for controlled industrial equipment. The practical trade-off is limited SRAM: complex buffering, display libraries, or multiple concurrent protocol stacks may exhaust the available 2 KB, so application buffering should be reviewed before firmware expansion.
Inirekomenda
Programmable Logic Controller
The ATTINY1626-SU is useful in small programmable logic controllers because Configurable Custom Logic and the Event System can implement timed or event-driven behavior alongside ordinary AVR firmware. Multiple serial interfaces allow the controller to connect to sensor modules, operator interfaces, or supervisory equipment without requiring several separate interface ICs. With 16 KB Flash, 2 KB SRAM, and 256 bytes of EEPROM, it is best suited to compact control loops rather than large PLC workloads. Firmware should reserve memory for communications and diagnostics, while the board design should provide stable regulation and place decoupling close to the supply pins.
Inirekomenda
Serial Communication Bridge
The ATTINY1626-SU can act as a compact serial bridge because it supports I2C, SPI, and UART/USART within a 20-pin SOIC package. Firmware can translate between a host UART and an I2C or SPI peripheral while the hardware multiplier accelerates appropriate arithmetic in protocol and data-processing routines. The 20 MHz operating speed provides ample margin for common embedded serial rates and moderate protocol overhead. For high-throughput transfers, interrupt-driven serial handling and careful buffer allocation are important because only 2 KB of SRAM is available. The exact peripheral multiplexing must be checked against the selected 20-pin assignments.
Inirekomenda
Compact Motor Controller
The ATTINY1626-SU is suitable for small motor-control and actuator modules where a 20-pin package, fast execution, and integrated analog and logic peripherals are valuable. The 12-bit differential ADC can monitor a current or position signal, while Configurable Custom Logic can help capture or coordinate signals outside the main CPU loop. I2C and SPI permit connection to position sensors, gate drivers, or supervisory controllers, and UART/USART supports configuration and telemetry. Firmware and PCB design must account for the device's limited 2 KB SRAM and ensure that switching-node noise is controlled before relying on differential ADC accuracy.
Inirekomenda
Battery-Powered Monitoring Device
The ATTINY1626-SU can serve as the controller in a battery-powered monitoring device where periodic measurement, event handling, and low-power communication are more important than continuous high-throughput processing. The 20 MHz AVR core allows quick acquisition and filtering between low-power sleep intervals, while EEPROM retains 256 bytes of calibration or configuration information. Serial interfaces permit attachment to environmental, current, or wearable sensors. The designer should verify the exact active and sleep current from the operating conditions section of the family data sheet, because those figures determine whether the system meets its battery-life target.
Inirekomenda
Embedded Test and Measurement
The ATTINY1626-SU is appropriate for compact embedded test and measurement products that combine signal capture, control, and host communication in one package. Its 12-bit differential ADC supports analog measurement, Configurable Custom Logic can assist with deterministic input handling, and UART/USART provides a simple connection to a computer or embedded display. The 20 MHz AVR processor executes measurement setup and control routines from the available 16 KB Flash memory. The main constraints are analog front-end design, calibration storage, and the 2 KB SRAM limit. These factors must be addressed together because digital conversion accuracy alone does not determine the accuracy of the complete instrument.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for ATTINY1626-SU — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | ATTINY1626 | ATTINY1606-SF |
|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 20-pin SOIC | 20-pin SOIC option | 20-pin PDSO |
| CPU Architecture | 8-bit AVR with hardware multiplier | 8-bit AVR with hardware multiplier | 8-bit AVR |
| Maximum Clock Frequency | 20 MHz | 20 MHz | 20 MHz |
Pangunahing mga Pagkakaiba
- Configurable peripheral integration in a 20-pin SOIC (kumpara saATTINY1606-SF)
- Differential analog conversion (kumpara saATTINY1606-SF)
- Serial connectivity without external interface controllers (kumpara saATTINY1606-SF)
- Balanced memory configuration for embedded control (kumpara saATTINY1606-SF)
Talaan ng Disenyo
Place the supply bypass capacitor directly between the appropriate power and ground pins, with a short return path that avoids switching-current loops. Treat the analog, digital, and communication sections as separate return regions where the board layout permits. The differential ADC and configurable logic can reduce software overhead, but their accuracy still depends on clean reference routing, controlled ground impedance, and separating noisy actuator drive paths from measurement inputs.
Confirm the regulator's output voltage, startup behavior, and load transient response against the operating requirements of the ATTINY1626-SU. The MCU supports communication and analog activity at up to 20 MHz, so supply integrity becomes more important when digital outputs switch quickly. Include local decoupling and avoid routing motor, relay, or power-converter return current beneath the analog input region. Validate brownout and power-sequencing behavior with the intended system load rather than only at idle.
Do not assume that every 20-pin AVR controller is pin-compatible with the ATTINY1626-SU. Verify the exact pin names, alternate-function assignments, power pins, ADC channels, communication pins, programming interface, and reset behavior in the manufacturer pin-description table. Pay particular attention to the limited 2 KB SRAM when adding libraries, and use the 256-byte EEPROM for settings that must persist without occupying RAM.
Impormasyon ng Pagsunod sa Kautusan
Compliance status was not explicitly established for the exact ATTINY1626-SU ordering code in the manufacturer or distributor information used for this record.