ATXMEGA128A3-AU - 32MHz 128KB AVR MCU | Microchip
部品番号: ATXMEGA128A3-AU ✓ 生産中ATXMEGA128A3-AU 概要
An 8/16-bit microcontroller is a semiconductor controller designed to execute embedded instructions with low power consumption and broad peripheral integration. The AVR enhanced RISC architecture supports single-cycle instruction execution, while the XMEGA A3 family integrates memory, communications, timing, analog, and event-management resources into one device. Within the product hierarchy, the ATXMEGA128A3-AU belongs to the XMEGA family of 8/16-bit MCUs and the broader embedded microcontroller and semiconductor categories.
Key features include 128 KB of in-system self-programmable Flash, an 8 KB boot-code section with independent lock bits, 8 KB of SRAM, and 2 KB of EEPROM. The four-channel DMA controller moves data without occupying the CPU for each transfer, while the eight-channel event system links timers, comparator outputs, and other peripherals. Operation from 1.6 V to 3.6 V supports low-voltage embedded systems, and the 32 MHz maximum clock provides a strong balance between compute throughput and flexible power management.
The architecture is designed to improve peripheral efficiency rather than relying only on interrupt-driven CPU servicing. DMA can transfer data among SRAM, Flash, EEPROM, and compatible peripherals, while the event system can route peripheral events directly to other peripherals. These features are particularly useful in designs that combine communication, control, data acquisition, and real-time timing without requiring a much larger processor. The manufacturer describes the family as supporting industrial, building automation, motor control, climate control, networking, metering, handheld, medical, and appliance applications.
Typical uses include industrial controllers, building and HVAC equipment, factory automation nodes, motor-control modules, power tools, metering equipment, optical instruments, and medical or handheld products. The ATXMEGA128A3-AU is most appropriate when firmware needs substantial local memory, flexible event routing, and deterministic DMA transfers in a compact surface-mount package. Its integrated resources can also reduce the number of external devices required around an embedded control board.
PCB design should preserve clean power and ground distribution around the 64-pin TQFP footprint, place decoupling capacitors close to the supply pins, and follow the manufacturer's pin and layout guidance for high-speed signals. Firmware developers should also account for boot-section protection, fuse settings, peripheral event routing, and DMA channel arbitration before finalizing the system architecture.
This page combines the manufacturer's device architecture and memory details with package-specific selection guidance, verified alternative references, application fit, and practical design considerations for engineers evaluating the ATXMEGA128A3-AU as an embedded-control platform.
ドロップイン代替品: ATXMEGA128A3-AU — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: ATXMEGA128A3-AU (同一形状・フットプリント) — 相違点: Event System Channels, Package, Boot Code Section, Architecture, DMA Channels.
ATXMEGA128A3U-AU
✅ ドロップイン📋 参考代替品(カタログ未掲載)
ATXMEGA128A3U-AN
✅ ドロップイン📋 参考代替品(カタログ未掲載)
ATXMEGA64A3-AU
✅ ドロップイン価格はお問い合わせください
データシートを見る →ATXMEGA128A3-AU 最大定格&電気的特性
| Architecture | 8/16-bit AVR enhanced RISC |
| 最大クロック周波数 | 32 MHz |
| Maximum Throughput | 32 MIPS |
| Flash Memory | 128 KB |
| Flash Organization | 64K x 16 bits |
| Boot Code Section | 8 KB |
| SRAM | 8 KB |
| EEPROM | 2 KB |
| DMA Channels | 4 channels |
| Event System Channels | 8 channels |
| Supply Voltage Range | 1.6 V to 3.6 V |
| パッケージ | 64-TQFP (14 x 14 mm) |
| 実装タイプ | Surface mount |
| Program Memory Type | In-system self-programmable Flash |
ATXMEGA128A3-AU 64-tqfp (14 x 14 mm) ピン配置ガイド
ATXMEGA128A3-AU (64-tqfp (14 x 14 mm) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: ATXMEGA128A3-AU.
詳細は データシート をご参照ください。
主な用途
ATXMEGA128A3-AU の用途: 6 件s: Industrial Automation Controller, Motor Control and Power Tools, Building Automation and HVAC, Smart Metering and Data Acquisition, Networking and Communication Gateway, Medical and Optical Instruments.
Industrial Automation Controller
The ATXMEGA128A3-AU fits compact industrial controllers because it combines a 32 MHz AVR core, 128 KB Flash, 8 KB SRAM, and a four-channel DMA controller. The DMA controller can move data among SRAM, memory, and compatible peripherals with less CPU intervention, while the eight-channel event system supports coordinated timing between sensors, timers, and communication interfaces. Its 1.6 V to 3.6 V operating range also permits integration into low-voltage industrial boards when the external power tree and signal levels match the MCU.
おすすめ
Motor Control and Power Tools
The ATXMEGA128A3-AU is suitable for motor-control modules and power tools that require fast control logic, local program storage, and deterministic peripheral handling. At up to 32 MHz and 32 MIPS throughput, it can coordinate timer-based control, input capture, communications, and protection tasks, while the four DMA channels reduce interrupt overhead during repeated data movement. Its 128 KB Flash supports larger control algorithms and diagnostics. The 64-pin TQFP package also leaves access to a broad peripheral set for encoders, switching devices, and safety monitoring.
おすすめ
Building Automation and HVAC
Building automation and HVAC equipment benefit from the ATXMEGA128A3-AU's combination of 8 KB SRAM, 128 KB Flash, and hardware event routing. Multiple timers, communication tasks, sensor acquisition, and actuator control can coexist without relying entirely on software polling. The four DMA channels support efficient movement of sampled or buffered data, while the 32 MHz core provides capacity for protocol processing and local supervisory logic. Its low 1.6 V minimum supply supports compact sensor and controller boards, provided regulators and external interfaces are designed for the operating environment.
おすすめ
Smart Metering and Data Acquisition
The ATXMEGA128A3-AU is appropriate for metering equipment that must acquire, process, and retain local information without a high-power processor. Its four DMA channels can accelerate transfers between memory and compatible peripherals, while the eight-channel event system coordinates timing-sensitive events. The 128 KB Flash provides room for protocols, calibration data, and application firmware, and 2 KB of EEPROM supports nonvolatile parameter storage. At 32 MHz, the device can service communications and measurement tasks, although accuracy also depends on suitable front-end sensing and reference components.
おすすめ
Networking and Communication Gateway
The ATXMEGA128A3-AU can serve as a local communication gateway or protocol controller in compact networking equipment. Its 32 MHz throughput supports protocol processing alongside system supervision, and the event system can connect peripheral events without routing every interaction through the main CPU. The four DMA channels are valuable for sustained data movement, while 128 KB Flash permits substantial protocol stacks and field-upgrade support. An external Ethernet or radio interface is still required for network connectivity, and total throughput and latency must be evaluated with the selected communications transceiver.
おすすめ
Medical and Optical Instruments
The ATXMEGA128A3-AU is suitable for compact medical, optical, and laboratory instruments that require local control, communication, and deterministic peripheral coordination. The eight-channel event system can connect timer and comparator events, and DMA can reduce processor involvement in data acquisition. Its 128 KB Flash supports embedded control and diagnostic firmware, while 8 KB SRAM accommodates working buffers. For medical equipment, the exact device grade, external safety controls, isolation requirements, validation process, and applicable regulatory documentation must be assessed independently of the MCU's general-purpose processing capability.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: ATXMEGA128A3-AU — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | ATXMEGA128A3U-AU | ATXMEGA128A3U-AN | ATXMEGA64A3-AU |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 64-TQFP (14 x 14 mm) | 64-TQFP (14 x 14 mm) | 64-TQFP (14 x 14 mm) | 64-TQFP (14 x 14 mm) |
| Architecture | 8/16-bit AVR enhanced RISC | 8/16-bit AVR enhanced RISC | 8/16-bit AVR enhanced RISC | 8/16-bit AVR enhanced RISC |
| Maximum Clock Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Flash Memory | 128 KB | 128 KB | 128 KB | 64 KB, 50% lower than target |
| EEPROM | 2 KB | 2 KB | 2 KB | 2 KB |
| DMA Controller | 4 channels | 4 channels | 4 channels | 4 channels |
| Event System | 8 channels | 8 channels | 8 channels | 8 channels |
| Supply Voltage Range | 1.6 V to 3.6 V | 1.6 V to 3.6 V | 1.6 V to 3.6 V | 1.6 V to 3.6 V |
主な差別化要因
- Larger Flash budget within the same 64-pin A3 family (vs ATXMEGA64A3-AU)
- Direct family compatibility with the 32 MHz performance class (vs ATXMEGA128A3U-AU)
- Temperature-grade ordering flexibility (vs ATXMEGA128A3U-AU)
設計ノート
Route the ATXMEGA128A3-AU supply through a low-impedance 3.3 V or other approved rail and place the manufacturer-recommended decoupling capacitors adjacent to the appropriate power and ground pins. Keep analog, digital, and high-current return paths controlled to prevent switching-node current from flowing beneath the MCU. Verify brownout behavior, clock startup, and regulator sequencing against the selected operating voltage before validating the board.
Use the manufacturer's 64-pin TQFP land pattern and follow the package drawing for pin-1 orientation and exposed or lead geometry. Maintain a continuous ground reference beneath and around the device where the recommended footprint permits. Route programming, reset, and communication signals away from switching converters and motor-drive nodes, and use short paths for the oscillator and decoupling connections.
Plan DMA, event-system, and timer resources before allocating pins because signal multiplexing can constrain the final board layout. Create firmware and pin-assignment tables during schematic capture, identify every peripheral channel in use, and confirm that the selected TQFP variant exposes the required functions. This prevents late changes to communication, control, or programming nets and reduces the risk of an unsuitable package substitution.
Do not treat ATXMEGA128A3-AU, ATXMEGA128A3U-AU, and ATXMEGA128A3U-AN as automatically interchangeable solely because their names are similar. Check the exact ordering table, pin table, memory organization, application-section locks, boot-section configuration, temperature grade, and fuse settings. Also avoid substituting ATXMEGA64A3-AU when the original design depends on more than 64 KB of Flash.
コンプライアンス情報
The industrial green designation shown for ATXMEGA128A3U-AUR does not explicitly establish every material-compliance field for ATXMEGA128A3-AU. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation from Microchip's current material-compliance documentation for the exact ordering code.