Microchip Technology

ATXMEGA128A3-AU - 32MHz 128KB AVR MCU | Microchip

MPN: ATXMEGA128A3-AU ✓ Aktif
1.6 V to 3.6 V Vdss 64-TQFP (14 x 14 mm) Package 32 MHz Speed 128 KB Memory
MOQ: 1 |

ATXMEGA128A3-AU Ringkasan

The Microchip Technology ATXMEGA128A3-AU is a low-power, high-performance 8/16-bit AVR XMEGA A3 microcontroller operating at up to 32 MHz, with 128 KB of self-programming Flash memory, 8 KB of SRAM, and 2 KB of EEPROM in a 64-pin TQFP package measuring 14 x 14 mm. The device provides up to 32 MIPS throughput and combines a 4-channel DMA controller with an 8-channel event system for efficient peripheral transfers and deterministic event handling.

An 8/16-bit microcontroller is a semiconductor controller designed to execute embedded instructions with low power consumption and broad peripheral integration. The AVR enhanced RISC architecture supports single-cycle instruction execution, while the XMEGA A3 family integrates memory, communications, timing, analog, and event-management resources into one device. Within the product hierarchy, the ATXMEGA128A3-AU belongs to the XMEGA family of 8/16-bit MCUs and the broader embedded microcontroller and semiconductor categories.

Key features include 128 KB of in-system self-programmable Flash, an 8 KB boot-code section with independent lock bits, 8 KB of SRAM, and 2 KB of EEPROM. The four-channel DMA controller moves data without occupying the CPU for each transfer, while the eight-channel event system links timers, comparator outputs, and other peripherals. Operation from 1.6 V to 3.6 V supports low-voltage embedded systems, and the 32 MHz maximum clock provides a strong balance between compute throughput and flexible power management.

The architecture is designed to improve peripheral efficiency rather than relying only on interrupt-driven CPU servicing. DMA can transfer data among SRAM, Flash, EEPROM, and compatible peripherals, while the event system can route peripheral events directly to other peripherals. These features are particularly useful in designs that combine communication, control, data acquisition, and real-time timing without requiring a much larger processor. The manufacturer describes the family as supporting industrial, building automation, motor control, climate control, networking, metering, handheld, medical, and appliance applications.

Typical uses include industrial controllers, building and HVAC equipment, factory automation nodes, motor-control modules, power tools, metering equipment, optical instruments, and medical or handheld products. The ATXMEGA128A3-AU is most appropriate when firmware needs substantial local memory, flexible event routing, and deterministic DMA transfers in a compact surface-mount package. Its integrated resources can also reduce the number of external devices required around an embedded control board.

PCB design should preserve clean power and ground distribution around the 64-pin TQFP footprint, place decoupling capacitors close to the supply pins, and follow the manufacturer's pin and layout guidance for high-speed signals. Firmware developers should also account for boot-section protection, fuse settings, peripheral event routing, and DMA channel arbitration before finalizing the system architecture.

This page combines the manufacturer's device architecture and memory details with package-specific selection guidance, verified alternative references, application fit, and practical design considerations for engineers evaluating the ATXMEGA128A3-AU as an embedded-control platform.

Pilihan pengganti yang segera untuk ATXMEGA128A3-AU — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera ATXMEGA128A3-AU (sama faktor bentuk dan kaki) — berbeza dalam Event System Channels, Package, Boot Code Section, Architecture, DMA Channels.

Microchip Technology
Event System Channels: 8
Package: 64-TQFP (14x14 mm)
Boot Code Section: 4 KB
Bandingkan Dengan ATXMEGA128A3-AU →
Microchip Technology
Event System Channels: 4 channels
Package: 64-pin TQFP, 14 x 14 mm
Architecture: AVR enhanced RISC
Bandingkan Dengan ATXMEGA128A3-AU →

ATXMEGA128A3U-AU

✅ Masuk Drop-In
📦 64-TQFP (14 x 14 mm)
Same ATxmega128A3 128 KB Flash, 8 KB SRAM, and 32 MHz speed configuration; the U organization suffix requires verification against the target fuse and pin table.

📋 Alternatif rujukan (tidak dalam katalog)

ATXMEGA128A3U-AN

✅ Masuk Drop-In
📦 64-TQFP (14 x 14 mm)
Same 128 KB ATxmega128A3 memory and 32 MHz performance class in 64-pin TQFP; the N temperature suffix is the principal documented ordering difference.

📋 Alternatif rujukan (tidak dalam katalog)

ATXMEGA64A3-AU

✅ Masuk Drop-In
Microchip Technology
📦 64-TQFP (14 x 14 mm)
AVR XMEGA (8/16-bit RISC) · XMEGA A3 · 64 KB (32K x 16) · 4 KB · 4 KB · 2 KB · 32 MHz (32 MIPS) · 1.6 V to 3.6 V

Hubungi untuk harga

Lihat Datasheet →

ATXMEGA128A3-AU Penilaian maksimum & Ciri-ciri Elektrik

Architecture 8/16-bit AVR enhanced RISC
Frekuensi Klock Maksimum 32 MHz
Maximum Throughput 32 MIPS
Flash Memory 128 KB
Flash Organization 64K x 16 bits
Boot Code Section 8 KB
SRAM 8 KB
EEPROM 2 KB
DMA Channels 4 channels
Event System Channels 8 channels
Supply Voltage Range 1.6 V to 3.6 V
Kemasan 64-TQFP (14 x 14 mm)
Jenis Pemasangan Surface mount
Program Memory Type In-system self-programmable Flash

Panduan Konfigurasi Pin ATXMEGA128A3-AU 64-tqfp (14 x 14 mm)

Konfigurasi pin untuk ATXMEGA128A3-AU (64-tqfp (14 x 14 mm) pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.

Garis bentuk pengecah pakai 64-tqfp (14 x 14 mm) untuk ATXMEGA128A3-AU

Tiada data garisan pin yang diperoleh untuk ATXMEGA128A3-AU.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

ATXMEGA128A3-AU patut untuk 6 aplikasis: Industrial Automation Controller, Motor Control and Power Tools, Building Automation and HVAC, Smart Metering and Data Acquisition, Networking and Communication Gateway, Medical and Optical Instruments.

🏭

Industrial Automation Controller

The ATXMEGA128A3-AU fits compact industrial controllers because it combines a 32 MHz AVR core, 128 KB Flash, 8 KB SRAM, and a four-channel DMA controller. The DMA controller can move data among SRAM, memory, and compatible peripherals with less CPU intervention, while the eight-channel event system supports coordinated timing between sensors, timers, and communication interfaces. Its 1.6 V to 3.6 V operating range also permits integration into low-voltage industrial boards when the external power tree and signal levels match the MCU.

⚡

Motor Control and Power Tools

The ATXMEGA128A3-AU is suitable for motor-control modules and power tools that require fast control logic, local program storage, and deterministic peripheral handling. At up to 32 MHz and 32 MIPS throughput, it can coordinate timer-based control, input capture, communications, and protection tasks, while the four DMA channels reduce interrupt overhead during repeated data movement. Its 128 KB Flash supports larger control algorithms and diagnostics. The 64-pin TQFP package also leaves access to a broad peripheral set for encoders, switching devices, and safety monitoring.

🏠

Building Automation and HVAC

Building automation and HVAC equipment benefit from the ATXMEGA128A3-AU's combination of 8 KB SRAM, 128 KB Flash, and hardware event routing. Multiple timers, communication tasks, sensor acquisition, and actuator control can coexist without relying entirely on software polling. The four DMA channels support efficient movement of sampled or buffered data, while the 32 MHz core provides capacity for protocol processing and local supervisory logic. Its low 1.6 V minimum supply supports compact sensor and controller boards, provided regulators and external interfaces are designed for the operating environment.

🧩

Smart Metering and Data Acquisition

The ATXMEGA128A3-AU is appropriate for metering equipment that must acquire, process, and retain local information without a high-power processor. Its four DMA channels can accelerate transfers between memory and compatible peripherals, while the eight-channel event system coordinates timing-sensitive events. The 128 KB Flash provides room for protocols, calibration data, and application firmware, and 2 KB of EEPROM supports nonvolatile parameter storage. At 32 MHz, the device can service communications and measurement tasks, although accuracy also depends on suitable front-end sensing and reference components.

🌐

Networking and Communication Gateway

The ATXMEGA128A3-AU can serve as a local communication gateway or protocol controller in compact networking equipment. Its 32 MHz throughput supports protocol processing alongside system supervision, and the event system can connect peripheral events without routing every interaction through the main CPU. The four DMA channels are valuable for sustained data movement, while 128 KB Flash permits substantial protocol stacks and field-upgrade support. An external Ethernet or radio interface is still required for network connectivity, and total throughput and latency must be evaluated with the selected communications transceiver.

💊

Medical and Optical Instruments

The ATXMEGA128A3-AU is suitable for compact medical, optical, and laboratory instruments that require local control, communication, and deterministic peripheral coordination. The eight-channel event system can connect timer and comparator events, and DMA can reduce processor involvement in data acquisition. Its 128 KB Flash supports embedded control and diagnostic firmware, while 8 KB SRAM accommodates working buffers. For medical equipment, the exact device grade, external safety controls, isolation requirements, validation process, and applicable regulatory documentation must be assessed independently of the MCU's general-purpose processing capability.

Ringkasan Produk Disebarkan

ATSAM4E16EA-ANR Microchip Technology Dipergunakan di: Industrial Automation Controller MC9S08SH16CTGR low-power industrial controller companion Dipergunakan di: Industrial Automation Controller STM32G031C8U6TR STMicroelectronics Dipergunakan di: Industrial Automation Controller STM32G031G6U6TR STMicroelectronics Dipergunakan di: Motor Control and Power Tools STM32G030K6T6TR STMicroelectronics Dipergunakan di: Motor Control and Power Tools ATMEGA32-16AU Microchip Technology Dipergunakan di: Motor Control and Power Tools STM32G030F6P6TR STMicroelectronics Dipergunakan di: Building Automation and HVAC STM8S103F3M6TR STMicroelectronics Dipergunakan di: Building Automation and HVAC EFM32ZG110F4-B-QFN24R Silicon Labs Dipergunakan di: Building Automation and HVAC EFM32TG110F4-B-QFN24R low-power metering companion Dipergunakan di: Smart Metering and Data Acquisition MSP430F133IPMR Texas Instruments Dipergunakan di: Smart Metering and Data Acquisition KSZ8041TLI-TR Microchip Technology Dipergunakan di: Smart Metering and Data Acquisition KSZ8081RNACA Microchip Technology Dipergunakan di: Networking and Communication Gateway KSZ8041RNL-TR Microchip Technology Dipergunakan di: Networking and Communication Gateway LAN7500I-ABZJ-TR Microchip Technology Dipergunakan di: Networking and Communication Gateway STM32G474VET6TR STMicroelectronics Dipergunakan di: Medical and Optical Instruments STM32G431C8T6TR STMicroelectronics Dipergunakan di: Medical and Optical Instruments ATSAM4LS4CA-CFU Microchip Technology Dipergunakan di: Medical and Optical Instruments
What is the ATXMEGA128A3-AU?
The ATXMEGA128A3-AU is a low-power 8/16-bit AVR XMEGA A3 microcontroller from Microchip Technology. According to the manufacturer product page, it operates at up to 32 MHz and provides up to 32 MIPS throughput, 128 KB of self-programming Flash, 8 KB of SRAM, 2 KB of EEPROM, a 4-channel DMA controller, and an 8-channel event system in a 64-pin package.
How much Flash and SRAM does the ATXMEGA128A3-AU have?
The ATXMEGA128A3-AU provides 128 KB of Flash memory, 8 KB of SRAM, and 2 KB of EEPROM. According to the Microchip Technology ATxmega128A3 product page, the Flash is organized as 64K x 16 bits and includes an 8 KB boot-code section with independent lock bits, making the device suitable for applications requiring separate firmware or bootloader protection.
What is the maximum clock speed of ATXMEGA128A3-AU?
The ATXMEGA128A3-AU operates at up to 32 MHz and can reach up to 32 MIPS throughput. The manufacturer describes the enhanced RISC architecture as capable of executing powerful instructions in a single clock cycle, allowing the MCU to handle control logic, communications, and peripheral coordination while providing clock-dependent power-management options.
What supply voltage does ATXMEGA128A3-AU require?
The ATXMEGA128A3-AU operates from 1.6 V to 3.6 V. The manufacturer product page identifies the device as a low-power CMOS XMEGA microcontroller, while Mouser lists the same 1.6 V to 3.6 V supply range. This operating range supports 1.8 V and 3.3 V embedded systems when the board-level components and clock configuration are designed accordingly.
What package does the ATXMEGA128A3-AU use?
The ATXMEGA128A3-AU is supplied in a 64-pin TQFP package measuring 14 x 14 mm. DigiKey identifies the package as 64-TQFP (14 x 14), and Microchip states that the ATxmega A3 series supports 64-pin packages. The same TQFP footprint is required when planning a direct board-level substitution.
Where can I download the ATXMEGA128A3-AU datasheet?
The official ATXMEGA128A3-AU documentation is available through the Microchip Technology ATxmega128A3 product page at https://www.microchip.com/en-us/product/ATxmega128A3. The page provides device documentation and application information. Use the manufacturer's pin table and electrical characteristics when assigning PCB pins, programming fuses, and validating power, clock, and peripheral connections.
Where is the ATXMEGA128A3-AU pinout located?
The ATXMEGA128A3-AU pinout is located in the pin-description table of the manufacturer datasheet linked from the official ATxmega128A3 product page. The component uses 64 pins in a 14 x 14 mm TQFP package. Follow the numbered pin table and package drawing when assigning power, ground, programming, reset, communication, and peripheral signals.
What are the DMA and event-system resources of ATXMEGA128A3-AU?
The ATXMEGA128A3-AU includes a 4-channel DMA controller and an 8-channel event system. According to the Microchip Technology product page, these resources improve peripheral-transfer efficiency and event routing. DMA can reduce CPU involvement during data movement, while the event system can connect compatible peripheral events without routing every action through software interrupt handling.
When should I choose ATXMEGA128A3-AU over a smaller AVR?
Choose the ATXMEGA128A3-AU when a design needs more local memory and event-driven peripherals than a smaller AVR can provide. Its 128 KB Flash, 8 KB SRAM, 2 KB EEPROM, four DMA channels, and eight event channels suit industrial controllers, meters, motor-control modules, HVAC equipment, and networked embedded products, although a smaller AVR may be preferable for simple low-cost I/O tasks.
Is ATXMEGA128A3-AU suitable for industrial and motor-control applications?
The ATXMEGA128A3-AU is suitable for industrial, motor-control, building automation, factory automation, and climate-control designs. Microchip identifies these areas as ATxmega A3 applications, and the 32 MHz speed, 8 KB SRAM, four DMA channels, and eight-channel event system support simultaneous control, communication, and data-transfer tasks.
What is the best drop-in replacement for ATXMEGA128A3-AU?
The closest supported replacements are Microchip ATXMEGA128A3U-AU and ATXMEGA128A3U-AN because they retain the ATxmega128A3 device identity and 64-pin TQFP format. Before replacing ATXMEGA128A3-AU, verify the exact package, temperature grade, fuse configuration, pin functions, and device revision in the manufacturer documentation. The 128 KB memory configuration should not be reduced unless firmware is also reviewed.
Can ATXMEGA128A3U-AU replace ATXMEGA128A3-AU?
ATXMEGA128A3U-AU can be considered a candidate replacement because it retains the ATxmega128A3 family, 128 KB Flash configuration, 32 MHz speed, and 64-pin TQFP package. A drop-in board substitution still requires checking the exact pin table, operating-temperature grade, boot and application-section locks, clock configuration, and any organization-specific suffix requirements before production release.
ATXMEGA128A3-AU vs ATXMEGA64A3-AU: which should be selected?
Select ATXMEGA128A3-AU when the application requires the larger memory budget; select ATXMEGA64A3-AU only after confirming that 64 KB Flash and its associated memory resources are sufficient. Both belong to the 64-pin XMEGA A3 family, but the 128 KB versus 64 KB Flash distinction changes firmware capacity, boot space, and suitability for application code or asset-heavy control systems.
Where can I buy ATXMEGA128A3-AU and check its lead time?
Use the Request a Quote form on this page to request the current ATXMEGA128A3-AU price, stock status, minimum order quantity, and production lead time. The manufacturer lists the ATxmega128A3 family as a low-power XMEGA A3 microcontroller product, while current channel availability can vary by package suffix, quantity, and manufacturing schedule.
Is ATXMEGA128A3-AU in stock?
Current stock for ATXMEGA128A3-AU is confirmed through the Request a Quote form on this page. The component is shown as an active Microchip Technology product with 128 KB Flash, 8 KB SRAM, and a 64-pin TQFP package. When requesting a quotation, include your required quantity, date code requirement, target price, and shipment destination.
How should the ATXMEGA128A3-AU be decoupled on a PCB?
Place the required supply capacitors close to the corresponding ATXMEGA128A3-AU power and ground pins, and follow the manufacturer's recommended values and layout drawings. Keep high-current return paths compact, maintain continuous ground planes, and route sensitive clock and communication signals away from noisy switching nodes. Accurate decoupling and return-current geometry reduce supply disturbance and improve signal integrity.
Is ATXMEGA128A3-AU RoHS compliant and AEC-Q100 qualified?
The RoHS, REACH, lead-free, halogen-free, and conflict-minerals status of ATXMEGA128A3-AU should be confirmed from the current Microchip product declaration or material-compliance documentation. Its industrial temperature marking is indicated in the distributor listing, but that marking alone does not establish AEC-Q100 qualification. Automotive designs should request the specific qualification record for the exact suffix.

Data referensi kejuruteraan untuk ATXMEGA128A3-AU — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose ATXMEGA128A3-AU when an embedded design needs the full 128 KB Flash configuration, 8 KB SRAM, four DMA channels, eight event-system channels, and up to 32 MIPS throughput in a 64-pin 14 x 14 mm TQFP package. It is well suited to industrial control, motor control, building automation, metering, and local communications gateways. ATXMEGA128A3U-AU is the closest family candidate when its ordering code and device organization match the target, while ATXMEGA128A3U-AN may fit a required N temperature-grade configuration. ATXMEGA64A3-AU is suitable only when 64 KB Flash is sufficient; otherwise it requires a firmware and boot-space review. For every substitution, confirm the exact pin table, temperature range, fuses, boot and application lock bits, clock configuration, and package drawing. A mechanically similar footprint alone does not guarantee that programming, peripheral multiplexing, or production requirements are identical.

Perbandingan dengan Gantian

Parametr Produk Ini ATXMEGA128A3U-AU ATXMEGA128A3U-AN ATXMEGA64A3-AU
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 64-TQFP (14 x 14 mm) 64-TQFP (14 x 14 mm) 64-TQFP (14 x 14 mm) 64-TQFP (14 x 14 mm)
Architecture 8/16-bit AVR enhanced RISC 8/16-bit AVR enhanced RISC 8/16-bit AVR enhanced RISC 8/16-bit AVR enhanced RISC
Maximum Clock Frequency 32 MHz 32 MHz 32 MHz 32 MHz
Flash Memory 128 KB 128 KB 128 KB 64 KB, 50% lower than target
EEPROM 2 KB 2 KB 2 KB 2 KB
DMA Controller 4 channels 4 channels 4 channels 4 channels
Event System 8 channels 8 channels 8 channels 8 channels
Supply Voltage Range 1.6 V to 3.6 V 1.6 V to 3.6 V 1.6 V to 3.6 V 1.6 V to 3.6 V

Penyeberangsung Jelas

  • Larger Flash budget within the same 64-pin A3 family (vsATXMEGA64A3-AU)
  • Direct family compatibility with the 32 MHz performance class (vsATXMEGA128A3U-AU)
  • Temperature-grade ordering flexibility (vsATXMEGA128A3U-AU)

Catatan Desain

Route the ATXMEGA128A3-AU supply through a low-impedance 3.3 V or other approved rail and place the manufacturer-recommended decoupling capacitors adjacent to the appropriate power and ground pins. Keep analog, digital, and high-current return paths controlled to prevent switching-node current from flowing beneath the MCU. Verify brownout behavior, clock startup, and regulator sequencing against the selected operating voltage before validating the board.

Use the manufacturer's 64-pin TQFP land pattern and follow the package drawing for pin-1 orientation and exposed or lead geometry. Maintain a continuous ground reference beneath and around the device where the recommended footprint permits. Route programming, reset, and communication signals away from switching converters and motor-drive nodes, and use short paths for the oscillator and decoupling connections.

Plan DMA, event-system, and timer resources before allocating pins because signal multiplexing can constrain the final board layout. Create firmware and pin-assignment tables during schematic capture, identify every peripheral channel in use, and confirm that the selected TQFP variant exposes the required functions. This prevents late changes to communication, control, or programming nets and reduces the risk of an unsuitable package substitution.

Do not treat ATXMEGA128A3-AU, ATXMEGA128A3U-AU, and ATXMEGA128A3U-AN as automatically interchangeable solely because their names are similar. Check the exact ordering table, pin table, memory organization, application-section locks, boot-section configuration, temperature grade, and fuse settings. Also avoid substituting ATXMEGA64A3-AU when the original design depends on more than 64 KB of Flash.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The industrial green designation shown for ATXMEGA128A3U-AUR does not explicitly establish every material-compliance field for ATXMEGA128A3-AU. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation from Microchip's current material-compliance documentation for the exact ordering code.

Pencarian Berhubungan

ATXMEGA128A3-AU datasheet ATXMEGA128A3-AU pinout ATXMEGA128A3-AU specifications ATXMEGA128A3-AU price ATXMEGA128A3-AU stock ATXMEGA128A3-AU equivalent ATXMEGA128A3-AU replacement ATXMEGA128A3U-AU cross reference ATXMEGA128A3-AU 64-TQFP ATXMEGA128A3-AU 32MHz 128KB Microchip ATXMEGA128A3-AU ATXMEGA128A3-AU industrial controller ATXMEGA128A3-AU motor control ATXMEGA128A3-AU supply voltage

Komponen dan Tanda berkaitan

Microchip Technology ATXMEGA128A3-AU ATXMEGA128A3U-AU ATXMEGA128A3U-AN ATXMEGA64A3-AU ATxmega128A3 AVR enhanced RISC architecture 8/16-bit microcontroller embedded microcontroller semiconductor self-programmable Flash SRAM EEPROM DMA controller event system 32 MIPS throughput 32 MHz clock 64-TQFP TQFP family surface-mount package industrial automation motor control building automation HVAC control smart metering industrial networking
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ