ATXMEGA128A3-AU - 32MHz 128KB AVR MCU | Microchip
MPN: ATXMEGA128A3-AU ✓ 啟用中ATXMEGA128A3-AU 概覽
An 8/16-bit microcontroller is a semiconductor controller designed to execute embedded instructions with low power consumption and broad peripheral integration. The AVR enhanced RISC architecture supports single-cycle instruction execution, while the XMEGA A3 family integrates memory, communications, timing, analog, and event-management resources into one device. Within the product hierarchy, the ATXMEGA128A3-AU belongs to the XMEGA family of 8/16-bit MCUs and the broader embedded microcontroller and semiconductor categories.
Key features include 128 KB of in-system self-programmable Flash, an 8 KB boot-code section with independent lock bits, 8 KB of SRAM, and 2 KB of EEPROM. The four-channel DMA controller moves data without occupying the CPU for each transfer, while the eight-channel event system links timers, comparator outputs, and other peripherals. Operation from 1.6 V to 3.6 V supports low-voltage embedded systems, and the 32 MHz maximum clock provides a strong balance between compute throughput and flexible power management.
The architecture is designed to improve peripheral efficiency rather than relying only on interrupt-driven CPU servicing. DMA can transfer data among SRAM, Flash, EEPROM, and compatible peripherals, while the event system can route peripheral events directly to other peripherals. These features are particularly useful in designs that combine communication, control, data acquisition, and real-time timing without requiring a much larger processor. The manufacturer describes the family as supporting industrial, building automation, motor control, climate control, networking, metering, handheld, medical, and appliance applications.
Typical uses include industrial controllers, building and HVAC equipment, factory automation nodes, motor-control modules, power tools, metering equipment, optical instruments, and medical or handheld products. The ATXMEGA128A3-AU is most appropriate when firmware needs substantial local memory, flexible event routing, and deterministic DMA transfers in a compact surface-mount package. Its integrated resources can also reduce the number of external devices required around an embedded control board.
PCB design should preserve clean power and ground distribution around the 64-pin TQFP footprint, place decoupling capacitors close to the supply pins, and follow the manufacturer's pin and layout guidance for high-speed signals. Firmware developers should also account for boot-section protection, fuse settings, peripheral event routing, and DMA channel arbitration before finalizing the system architecture.
This page combines the manufacturer's device architecture and memory details with package-specific selection guidance, verified alternative references, application fit, and practical design considerations for engineers evaluating the ATXMEGA128A3-AU as an embedded-control platform.
直接替換替代品,適用於 ATXMEGA128A3-AU — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: ATXMEGA128A3-AU (相同外形與佔位) — 差異在於 Event System Channels, Package, Boot Code Section, Architecture, DMA Channels.
ATXMEGA128A3U-AU
✅ 直接替換📋 參考替代品(不在目錄中)
ATXMEGA128A3U-AN
✅ 直接替換📋 參考替代品(不在目錄中)
ATXMEGA64A3-AU
✅ 直接替換聯絡詢價
查看資料表 →ATXMEGA128A3-AU 最大額定值與電氣特性
| Architecture | 8/16-bit AVR enhanced RISC |
| 最大時脈頻率 | 32 MHz |
| Maximum Throughput | 32 MIPS |
| Flash Memory | 128 KB |
| Flash Organization | 64K x 16 bits |
| Boot Code Section | 8 KB |
| SRAM | 8 KB |
| EEPROM | 2 KB |
| DMA Channels | 4 channels |
| Event System Channels | 8 channels |
| Supply Voltage Range | 1.6 V to 3.6 V |
| 封裝 | 64-TQFP (14 x 14 mm) |
| 安裝類型 | Surface mount |
| Program Memory Type | In-system self-programmable Flash |
ATXMEGA128A3-AU 64-tqfp (14 x 14 mm) 腳位配置指南
ATXMEGA128A3-AU(64-tqfp (14 x 14 mm) 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: ATXMEGA128A3-AU.
請參閱 資料表 以查看完整腳位配置。
典型應用
ATXMEGA128A3-AU 適用於 6 應用s: Industrial Automation Controller, Motor Control and Power Tools, Building Automation and HVAC, Smart Metering and Data Acquisition, Networking and Communication Gateway, Medical and Optical Instruments.
Industrial Automation Controller
The ATXMEGA128A3-AU fits compact industrial controllers because it combines a 32 MHz AVR core, 128 KB Flash, 8 KB SRAM, and a four-channel DMA controller. The DMA controller can move data among SRAM, memory, and compatible peripherals with less CPU intervention, while the eight-channel event system supports coordinated timing between sensors, timers, and communication interfaces. Its 1.6 V to 3.6 V operating range also permits integration into low-voltage industrial boards when the external power tree and signal levels match the MCU.
推薦
Motor Control and Power Tools
The ATXMEGA128A3-AU is suitable for motor-control modules and power tools that require fast control logic, local program storage, and deterministic peripheral handling. At up to 32 MHz and 32 MIPS throughput, it can coordinate timer-based control, input capture, communications, and protection tasks, while the four DMA channels reduce interrupt overhead during repeated data movement. Its 128 KB Flash supports larger control algorithms and diagnostics. The 64-pin TQFP package also leaves access to a broad peripheral set for encoders, switching devices, and safety monitoring.
推薦
Building Automation and HVAC
Building automation and HVAC equipment benefit from the ATXMEGA128A3-AU's combination of 8 KB SRAM, 128 KB Flash, and hardware event routing. Multiple timers, communication tasks, sensor acquisition, and actuator control can coexist without relying entirely on software polling. The four DMA channels support efficient movement of sampled or buffered data, while the 32 MHz core provides capacity for protocol processing and local supervisory logic. Its low 1.6 V minimum supply supports compact sensor and controller boards, provided regulators and external interfaces are designed for the operating environment.
推薦
Smart Metering and Data Acquisition
The ATXMEGA128A3-AU is appropriate for metering equipment that must acquire, process, and retain local information without a high-power processor. Its four DMA channels can accelerate transfers between memory and compatible peripherals, while the eight-channel event system coordinates timing-sensitive events. The 128 KB Flash provides room for protocols, calibration data, and application firmware, and 2 KB of EEPROM supports nonvolatile parameter storage. At 32 MHz, the device can service communications and measurement tasks, although accuracy also depends on suitable front-end sensing and reference components.
推薦
Networking and Communication Gateway
The ATXMEGA128A3-AU can serve as a local communication gateway or protocol controller in compact networking equipment. Its 32 MHz throughput supports protocol processing alongside system supervision, and the event system can connect peripheral events without routing every interaction through the main CPU. The four DMA channels are valuable for sustained data movement, while 128 KB Flash permits substantial protocol stacks and field-upgrade support. An external Ethernet or radio interface is still required for network connectivity, and total throughput and latency must be evaluated with the selected communications transceiver.
推薦
Medical and Optical Instruments
The ATXMEGA128A3-AU is suitable for compact medical, optical, and laboratory instruments that require local control, communication, and deterministic peripheral coordination. The eight-channel event system can connect timer and comparator events, and DMA can reduce processor involvement in data acquisition. Its 128 KB Flash supports embedded control and diagnostic firmware, while 8 KB SRAM accommodates working buffers. For medical equipment, the exact device grade, external safety controls, isolation requirements, validation process, and applicable regulatory documentation must be assessed independently of the MCU's general-purpose processing capability.
推薦
推薦產品摘要
工程參考資料,適用於 ATXMEGA128A3-AU — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | ATXMEGA128A3U-AU | ATXMEGA128A3U-AN | ATXMEGA64A3-AU |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 64-TQFP (14 x 14 mm) | 64-TQFP (14 x 14 mm) | 64-TQFP (14 x 14 mm) | 64-TQFP (14 x 14 mm) |
| Architecture | 8/16-bit AVR enhanced RISC | 8/16-bit AVR enhanced RISC | 8/16-bit AVR enhanced RISC | 8/16-bit AVR enhanced RISC |
| Maximum Clock Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Flash Memory | 128 KB | 128 KB | 128 KB | 64 KB, 50% lower than target |
| EEPROM | 2 KB | 2 KB | 2 KB | 2 KB |
| DMA Controller | 4 channels | 4 channels | 4 channels | 4 channels |
| Event System | 8 channels | 8 channels | 8 channels | 8 channels |
| Supply Voltage Range | 1.6 V to 3.6 V | 1.6 V to 3.6 V | 1.6 V to 3.6 V | 1.6 V to 3.6 V |
主要差異化特點
- Larger Flash budget within the same 64-pin A3 family (對比ATXMEGA64A3-AU)
- Direct family compatibility with the 32 MHz performance class (對比ATXMEGA128A3U-AU)
- Temperature-grade ordering flexibility (對比ATXMEGA128A3U-AU)
設計說明
Route the ATXMEGA128A3-AU supply through a low-impedance 3.3 V or other approved rail and place the manufacturer-recommended decoupling capacitors adjacent to the appropriate power and ground pins. Keep analog, digital, and high-current return paths controlled to prevent switching-node current from flowing beneath the MCU. Verify brownout behavior, clock startup, and regulator sequencing against the selected operating voltage before validating the board.
Use the manufacturer's 64-pin TQFP land pattern and follow the package drawing for pin-1 orientation and exposed or lead geometry. Maintain a continuous ground reference beneath and around the device where the recommended footprint permits. Route programming, reset, and communication signals away from switching converters and motor-drive nodes, and use short paths for the oscillator and decoupling connections.
Plan DMA, event-system, and timer resources before allocating pins because signal multiplexing can constrain the final board layout. Create firmware and pin-assignment tables during schematic capture, identify every peripheral channel in use, and confirm that the selected TQFP variant exposes the required functions. This prevents late changes to communication, control, or programming nets and reduces the risk of an unsuitable package substitution.
Do not treat ATXMEGA128A3-AU, ATXMEGA128A3U-AU, and ATXMEGA128A3U-AN as automatically interchangeable solely because their names are similar. Check the exact ordering table, pin table, memory organization, application-section locks, boot-section configuration, temperature grade, and fuse settings. Also avoid substituting ATXMEGA64A3-AU when the original design depends on more than 64 KB of Flash.
合規資訊
The industrial green designation shown for ATXMEGA128A3U-AUR does not explicitly establish every material-compliance field for ATXMEGA128A3-AU. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation from Microchip's current material-compliance documentation for the exact ordering code.