Texas Instruments

CD40192BE - 4-Bit BCD Up/Down Counter | Texas Instruments

部品番号: CD40192BE ✓ 生産中
3 V to 18 V Vdss PDIP (N), 16 pins Package 11 MHz Speed
MOQ: 1 |

CD40192BE 概要

The Texas Instruments CD40192BE is a CMOS presettable BCD up/down counter with a 4-bit decade counter, separate up and down clock inputs, and a master reset in a 16-pin PDIP package. It operates from 3V to 18V, supports clock frequencies up to 11 MHz, and provides four buffered Q outputs together with CARRY and BORROW outputs.

A CMOS counter is a synchronous digital-logic circuit that stores a multi-bit count in flip-flop stages and advances that count in response to clock edges. The CD40192 belongs to the CMOS logic IC hierarchy, where it is a specialized decade counter rather than a general-purpose binary counter. Its BCD organization means the four output bits represent the ten states from zero through nine, making it suitable for decimal displays, decade sequencing, and programmable event counting.

Each counter stage is a synchronously clocked, gated D-type flip-flop. Four individual jam inputs allow the count to be preset in parallel, while a PRESET ENABLE input controls whether those jam levels are transferred to the internal stages. Separate CLOCK UP and CLOCK DOWN inputs permit increment or decrement operation, and a master RESET input returns the counter to its zero state. Buffered Q outputs expose the four BCD count bits directly.

The CD40192BE uses complementary MOS technology and operates across a 3V to 18V supply range. The 11 MHz maximum operating frequency provides ample margin for digital control, instrumentation, and pulse-counting systems. Because it operates from a single supply, the device simplifies designs that do not require split-rail logic. Its counter output logic and separate directional clocks make it easy to build bidirectional step sequences, decade dividers, and programmable timing chains.

Typical uses include decimal counter and display modules, industrial sequencing controllers, frequency-divider chains, event counters, laboratory pulse-counting equipment, and embedded control systems that interface mechanical switches or sensors to digital logic. It is particularly useful when a project needs true BCD counting rather than binary counting, since binary-to-decimal conversion can be avoided in LED display applications.

When designing around the CD40192BE, keep clock traces short and isolate switching or inductive sources from the counter inputs. Decoupling capacitors should be placed close to the supply pins, and unused input pins must be tied to a defined logic level. Confirm that the required count direction and preset behavior match the intended jam and preset-enable logic before laying out the circuit.

This page combines manufacturer specifications, verified distributor listings, pin-level implementation guidance, and function-level comparisons with available 16-pin CMOS counter alternatives. It also identifies where the CD40192BE should not be selected, such as designs that require binary counting or a surface-mount footprint.

ドロップイン代替品: CD40192BE — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

CD40192BCN

✅ ドロップイン
📦 PDIP-16
Same 4-bit BCD dual-clock counter and PDIP-16 footprint; manufacturer and temperature grade differ, so operating limits require verification.

📋 参考代替品(カタログ未掲載)

HCF40192BE

✅ ドロップイン
📦 PDIP-16
Same DIP-16 BCD up/down counter function; operating-temperature and timing specifications differ from the TI part.

📋 参考代替品(カタログ未掲載)

HEF40192BP

✅ ドロップイン
📦 PDIP-16
Same 16-pin BCD up/down counter footprint; supply, timing, and temperature limits must be compared before substitution.

📋 参考代替品(カタログ未掲載)

MC140192BCP

✅ ドロップイン
📦 PDIP-16
Same DIP-16 4-bit BCD up/down counter function with different manufacturer temperature and speed options.

📋 参考代替品(カタログ未掲載)

TC40192BP

✅ ドロップイン
📦 PDIP-16
Same PDIP-16 BCD up/down counter configuration; check clock-rate, voltage, and temperature differences against the TI datasheet.

📋 参考代替品(カタログ未掲載)

CD40192BE 最大定格&電気的特性

Counter Type 4-bit presettable BCD up/down counter
Logic Family CMOS
Supply Voltage Range 3 V to 18 V
最大クロック周波数 11 MHz
Number of Count Elements 4
Counting Sequence BCD decade, 0 to 9
Clock Edge Positive edge
Clock Inputs Separate clock up and clock down inputs
Jam Inputs 4 individual jam inputs
Preset Control PRESET ENABLE control input
Reset Master RESET input
Counter Outputs 4 buffered Q outputs
Carry Output CARRY output
Borrow Output BORROW output
Internal Counter Stage 4 synchronously clocked gated D-type flip-flops
パッケージ PDIP (N), 16 pins
実装タイプ Through-hole

CD40192BE ピン構成

DIP-16 Package Pinout Diagram DIP-16 16-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 DIP-16
ピン 1 CLOCK UP — Positive-edge clock input for counting upward
ピン 2 CLOCK DOWN — Positive-edge clock input for counting downward
ピン 3 RESET — Master reset input
ピン 4 PRESET ENABLE — Control input for the jam or preset function
ピン 5 JAM 0 — Parallel jam input for counter bit 0
ピン 6 JAM 1 — Parallel jam input for counter bit 1
ピン 7 JAM 2 — Parallel jam input for counter bit 2
ピン 8 JAM 3 — Parallel jam input for counter bit 3
ピン 9 Q 0 — Buffered BCD count output, least significant bit
ピン 10 Q 1 — Buffered BCD count output
ピン 11 Q 2 — Buffered BCD count output
ピン 12 Q 3 — Buffered BCD count output, most significant bit
ピン 13 CARRY — Carry output for upward counting
ピン 14 BORROW — Borrow output for downward counting
ピン 15 VSS — Ground reference
ピン 16 VDD — Positive supply input

主な用途

CD40192BE の用途: 6 件s: Decimal Counter and LED Display, Industrial Pulse and Event Counting, Programmable Step Sequencer, Frequency Divider and Decade Chain, Laboratory and Test Instrumentation, Directional Control and Bidirectional Counters.

💡

Decimal Counter and LED Display

The CD40192BE is well suited to decimal display sequencing because its four outputs represent BCD values from 0 to 9 rather than binary states from 0 to 15. Each positive edge on CLOCK UP advances one decade, while CLOCK DOWN reverses the sequence. The buffered Q outputs can drive display-decoder inputs or a multiplexed LED display controller. The separate CARRY and BORROW outputs also permit additional CD40192 stages to form larger decimal counting chains. Designers should account for propagation delay when cascading stages and should confirm that the selected display decoder accepts the counter's BCD output format.

🏭

Industrial Pulse and Event Counting

The CD40192BE provides a compact decimal event-counting function for industrial control systems that must accumulate pulses from switches, sensors, or machine events. Its separate directional clock inputs allow the count to be incremented or decremented by the same interface, while the master RESET clears the total and the jam inputs support parallel loading. With operation specified across 3V to 18V, the counter can be used with legacy 5V industrial logic as well as newer control rails. In noisy installations, shield the clock path and use filtering or Schmitt-trigger conditioning before allowing external events to drive the counter inputs.

⚙️

Programmable Step Sequencer

The CD40192BE can implement a compact programmable decade sequencer by combining its BCD count outputs with preset and reset control. A preset value loaded through the four jam inputs establishes the starting state, and successive clock-up edges move through the remaining decimal positions. Logic decoding of the four Q outputs can then select which output device or process stage is active. The 11 MHz maximum operating rate leaves substantial timing headroom for ordinary control sequences, but actual delay includes counter propagation time and any decoding gates. The design should prevent simultaneous activity on the up and down clock inputs to maintain an unambiguous count direction.

📟

Frequency Divider and Decade Chain

The CD40192BE can divide an incoming event stream into predictable decimal intervals, making it useful in timing, test, and repetitive-sequence systems. CARRY indicates a forward count transition at the end of a decade, while BORROW provides the corresponding indication during downward counting. These outputs may be used to trigger a parallel counter stage or a divider of the same family. Since each stage introduces propagation delay, cascaded designs should be checked for cumulative timing offset at the operating frequency. The device's 11 MHz capability is substantially above the rates normally required for basic decade division.

🧪

Laboratory and Test Instrumentation

In laboratory instrumentation, the CD40192BE can count test pulses and present a decimal total rather than requiring binary-to-decimal conversion. Its master reset provides a repeatable measurement start, while the jam inputs permit a known preset count for calibration or offset correction. The buffered Q outputs offer a convenient logic-level interface to external display or measurement equipment. Because the counter responds to positive clock edges, source conditioning should preserve clean edge transitions and avoid double counting. For low-noise analog measurement systems, keep the counter and its clock source physically separated from high-impedance analog nodes to minimize coupling.

🔄

Directional Control and Bidirectional Counters

The CD40192BE is useful when a system must count in either direction without changing the counter's counting base. A forward command pulses CLOCK UP, while a reverse command pulses CLOCK DOWN; the resulting BCD count appears on the four Q outputs. This arrangement simplifies mechanical joggers, position indicators, and reversible event counters compared with a design that needs a separate direction-control multiplexer. Firmware or external logic must ensure that both clocks are never asserted together. CARRY and BORROW provide boundary events that can be used to detect the ends of the decimal range or coordinate a multi-digit display.

おすすめ製品の概要

CD40192BCN Pin-compatible 4-bit BCD up/down counter 使用用途: Decimal Counter and LED Display, Programmable Step Sequencer, Laboratory and Test Instrumentation HCF40192BE Equivalent DIP-16 CMOS BCD counter 使用用途: Decimal Counter and LED Display, Frequency Divider and Decade Chain, Directional Control and Bidirectional Counters MC140192BCP DIP-16 BCD counter for industrial control designs 使用用途: Industrial Pulse and Event Counting, Laboratory and Test Instrumentation HEF40192BP Equivalent CMOS BCD up/down counter 使用用途: Industrial Pulse and Event Counting, Frequency Divider and Decade Chain TC40192BP Equivalent 16-pin BCD counter 使用用途: Programmable Step Sequencer, Directional Control and Bidirectional Counters
What is the CD40192BE and what does it do?
The CD40192BE is a 4-bit CMOS presettable BCD up/down counter that counts in decimal steps from 0 to 9. It has separate clock-up and clock-down inputs, four jam inputs for parallel loading, a preset-enable control, a master reset, four buffered Q outputs, and CARRY and BORROW outputs. According to the Texas Instruments CD40192B datasheet, its internal counter comprises four synchronously clocked, gated D-type flip-flops.
What is the operating voltage range of the CD40192BE?
The CD40192BE operates from 3V to 18V. According to the Texas Instruments CD40192B datasheet, this wide single-supply range allows the counter to interface with both modern low-voltage CMOS systems and legacy 5V logic. The device also operates from a single supply rather than requiring positive and negative rails, which simplifies bypassing and ground-reference design.
What is the maximum clock frequency of the CD40192BE?
The CD40192BE supports operation up to 11 MHz, as stated in the Texas Instruments CD40192B datasheet. That maximum clock rate makes the counter suitable for pulse counting, frequency division, sequencing, and control systems operating well beyond the rates of many mechanical inputs. Actual usable rate depends on supply voltage, clock pulse width, and system layout.
How do the clock up and clock down inputs work on the CD40192BE?
The CD40192BE counts upward when its CLOCK UP input receives a positive edge and downward when its CLOCK DOWN input receives a positive edge. The two clock inputs provide independent directional control rather than requiring a shared clock with a separate direction signal. Only the intended clock should be pulsed at a given time to avoid ambiguous counting behavior.
How do the jam and preset enable inputs preset the counter?
The four jam inputs provide the parallel count value, and the PRESET ENABLE input determines whether those jam levels are loaded into the counter stages. According to the Texas Instruments CD40192B datasheet, the CD40192B has four individual jam lines and a PRESET ENABLE control. Designers should hold preset logic in a defined inactive state during normal counting.
Where can I download the CD40192BE datasheet PDF?
The official CD40192B datasheet PDF is available from the Texas Instruments product page at https://www.ti.com/lit/ds/symlink/cd40192b.pdf. It covers the CD40192B and CD40193B families, including the counter architecture, terminal descriptions, operating characteristics, and application information. Use the pin-description table in that document when assigning PCB tracks.
Where can I find the CD40192BE pinout?
The CD40192BE uses a 16-pin PDIP package, and its pin-description table appears in the Texas Instruments CD40192B datasheet. The device provides separate up and down clocks, master reset, preset enable, four jam inputs, four Q outputs, CARRY, BORROW, and the two supply pins. Confirm every connection against the package drawing rather than relying on a generic CD4000-series diagram.
What is the difference between CD40192BE and CD40193BE?
The CD40192BE counts in BCD decade mode, while the CD40193BE uses binary counting. Both belong to the same 4-bit dual-clock up/down counter family and are available in 16-pin PDIP packages, but their count sequences are not interchangeable: CD40192BE produces 0 through 9, whereas CD40193BE represents 0 through 15 in binary. Verify the counting convention required by the display or control system.
Is the onsemi CD40192BCN a drop-in replacement for CD40192BE?
The onsemi CD40192BCN is a 4-bit BCD up/down counter in a 16-pin PDIP package and is the closest listed alternative for a DIP-16 design. Its counter function and package format match the CD40192BE, while the manufacturer and operating-temperature grade differ. Review the onsemi datasheet for timing, supply-voltage limits, and absolute maximum ratings before substituting it into production hardware.
Can the HCF40192BE replace the Texas Instruments CD40192BE?
The STMicroelectronics HCF40192BE is a 16-pin PDIP implementation of the same CMOS BCD up/down counter function, making it a candidate drop-in replacement. Before replacing the CD40192BE, compare maximum operating frequency, supply range, propagation delays, and temperature limits in the two manufacturers' datasheets. The footprint is compatible, but operating-limit differences can still affect timing margin.
What can replace the CD40192BE in a DIP-16 design?
The closest drop-in choices for a DIP-16 design are CD40192-series counters that retain the 4-bit BCD up/down function and 16-pin PDIP footprint, including the onsemi CD40192BCN and STMicroelectronics HCF40192BE. Do not substitute the CD40193 family when BCD counting is required, because it counts in binary. Verify pin-level functions, timing, voltage limits, and temperature ratings before final sourcing.
When should I choose the CD40192BE instead of a binary up/down counter?
Choose the CD40192BE when the counter output must represent decimal values directly, especially for 0-to-9 displays, decade sequencing, or decimal event counting. Its four Q outputs form a BCD word, while the CARRY and BORROW outputs support chained counting stages. A binary counter such as the CD40193BE is preferable only when the system specifically requires hexadecimal or binary count states.
Is the CD40192BE suitable for industrial control and instrumentation?
The CD40192BE is suitable for many industrial counting, sequencing, and pulse-processing tasks because it provides separate directional clocks, parallel preset control, and dedicated carry and borrow outputs. The 3V to 18V operating range supports both legacy and modern control rails. For production equipment, also verify the exact temperature grade, noise immunity, and timing margins required by the installation environment.
Where can I buy CD40192BE online and what is the current lead time?
Use the Request a Quote form on this page to request current CD40192BE pricing, stock confirmation, and lead time. The Texas Instruments CD40192BE is listed in a 16-pin PDIP package, and multiple distributor channels list the part. The purchasing response should confirm the exact suffix, manufacturer, quantity breaks, and current schedule before an order is released.
What are the key specifications of CD40192BE that engineers should know?
The key CD40192BE specifications are a 4-bit BCD decade counter, a 3V to 18V supply range, operation up to 11 MHz, separate clock-up and clock-down inputs, four jam inputs, master reset, four buffered Q outputs, and CARRY and BORROW outputs. It is packaged as a 16-pin PDIP and is built from four synchronously clocked, gated D-type flip-flops according to the Texas Instruments datasheet.

エンジニアリング参考データ: CD40192BE — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the CD40192BE when the system requires a through-hole, 4-bit BCD counter with separate up and down clocks, parallel jam loading, and both carry and borrow outputs. Its 3V to 18V supply range and 11 MHz capability suit legacy 5V designs as well as newer industrial and instrumentation circuits. Choose CD40192BCN, HCF40192BE, HEF40192BP, MC140192BCP, or TC40192BP when the same PDIP-16 counter function is needed from another manufacturer, but verify voltage, timing, temperature grade, and lifecycle requirements. Do not choose the CD40193 family when direct decimal counting is required, because its 0-to-15 binary sequence differs from the CD40192BE's 0-to-9 BCD sequence. For surface-mount production, this DIP-16 part is not the appropriate package choice.

代替品との比較

パラメータ この製品 CD40192BCN HCF40192BE HEF40192BP MC140192BCP TC40192BP
Brand Texas Instruments onsemi STMicroelectronics NXP Semiconductors onsemi Toshiba
Package PDIP-16 PDIP-16 PDIP-16 PDIP-16 PDIP-16 PDIP-16
Counter Function Presettable BCD up/down counter Presettable BCD up/down counter BCD up/down counter BCD up/down counter BCD up/down counter BCD up/down counter
Number of Count Elements 4 bits 4 bits 4 bits 4 bits 4 bits 4 bits
Counting Sequence BCD, 0 to 9 BCD, 0 to 9 BCD, 0 to 9 BCD, 0 to 9 BCD, 0 to 9 BCD, 0 to 9
Clock Direction Inputs Separate clock up and clock down inputs Separate clock up and clock down inputs Separate clock up and clock down inputs Separate clock up and clock down inputs Separate clock up and clock down inputs Separate clock up and clock down inputs
Preset and Jam Control 4 jam inputs with PRESET ENABLE control 4 jam inputs with PRESET ENABLE control 4 jam inputs with PRESET ENABLE control 4 jam inputs with PRESET ENABLE control 4 jam inputs with PRESET ENABLE control 4 jam inputs with PRESET ENABLE control
Output Functions 4 buffered Q outputs plus CARRY and BORROW 4 Q outputs plus CARRY and BORROW 4 Q outputs plus CARRY and BORROW 4 Q outputs plus CARRY and BORROW 4 Q outputs plus CARRY and BORROW 4 Q outputs plus CARRY and BORROW
Logic Technology CMOS CMOS CMOS CMOS CMOS CMOS

主な差別化要因

  • Direct BCD decade output for decimal display and sequencing (vs CD40193BE)
  • Independent directional counting in one counter (vs CD40193BE)
  • Broad single-supply operating range (vs HCF40192BE)

設計ノート

Place the supply bypass capacitor directly between pins 16 and 15, with the ground end connected to a low-impedance return plane. CMOS counters can switch their internal clock nodes quickly, so adequate local decoupling reduces supply transients that might appear on clock or preset pins. Use separate routing for the supply and jam inputs, and avoid sharing a narrow trace between sensitive analog nodes and counter output signals.

Keep the CLOCK UP and CLOCK DOWN traces short and provide a defined state for each input when it is not being driven. Because the counter reacts to positive edges, slow or noisy source transitions can produce multiple counts. For switches, sensors, or long wires, use a conditioning stage with hysteresis before connecting the signal to a clock input. Do not allow both directional clocks to pulse simultaneously.

Confirm that the required count base is BCD rather than binary before selecting CD40192BE over the CD40193 family. During normal counting, PRESET ENABLE must remain inactive, and the jam inputs should not inadvertently disturb the loaded count. For cascaded decimal stages, include the propagation delay of each stage in the timing budget and use CARRY or BORROW for the intended chaining direction.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

Compliance declarations are not stated in the cited manufacturer or distributor results and must be confirmed for the exact manufacturer and package suffix before procurement.

関連検索

CD40192BE datasheet CD40192BE datasheet pdf CD40192BE pinout CD40192BE equivalent CD40192BE replacement CD40192BE price CD40192BE stock Texas Instruments CD40192BE CD40192BE PDIP-16 counter CD40192BE vs CD40193BE CD40192BE BCD up down counter CD40192BE application circuit

関連部品&用語

Texas Instruments CD40192BE CD40192B CD40192BCN HCF40192BE HEF40192BP MC140192BCP TC40192BP CD40193BE CMOS BCD up/down counter decade counter logic IC digital counter counter IC PDIP-16 DIP-16 through-hole package surface mount clock up clock down jam input CARRY output BORROW output complementary MOS
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示