DSPIC33EP128MU206-E/PT - 16-bit DSC 128KB Flash USB TQFP-64 | Microchip
部品番号: DSPIC33EP128MU206-E/PT ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $6.95 | $6.95 |
| 10 | $6.31 | $63.10 |
| 100 | $5.62 | $562.00 |
| 500 | $5.05 | $2,525.00 |
| 1,000 | $4.58 | $4,580.00 |
DSPIC33EP128MU206-E/PT 概要
A digital signal controller combines the compute architecture of a microcontroller with the mathematical throughput of a DSP, sitting in the power/performance hierarchy between general-purpose MCUs and dedicated DSP ICs. The dsPIC33E family adds fast multiply-accumulate hardware, barrel shifters, and modulo/bit-reversed addressing for efficient filtering and control-loop mathematics.
Key features include 1 KB of data EEPROM in flash, rich connectivity (USB OTG, up to 4 UART, 3 SPI, 4 I2C modules), peripheral pin select (PPS) for flexible pin mapping, and the MU-series analog integration that pairs the 12-bit ADC with three op-amps for signal conditioning directly on-chip. Multiple power management modes (idle, doze, sleep) reduce consumption in battery-operated designs.
Typical applications include motor control and drives, digital power conversion, USB-connected industrial sensors, and general-purpose embedded control that benefits from DSP math. The extended temperature grade (-E) supports harsh industrial and automotive-adjacent environments.
Design consideration: the 64-pin TQFP uses peripheral pin select for digital functions, so pin assignment must be configured in software at startup; also provide a clean 3.3 V rail (3.0 V to 3.6 V) and follow Microchip's USB layout guidance for VBUS and differential pairs.
This page adds distributor stocking data, drop-in family alternatives, and practical design guidance not found in the manufacturer datasheet alone.
ドロップイン代替品: DSPIC33EP128MU206-E/PT — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: DSPIC33EP128MU206-E/PT （同一形状・フットプリント） — 相違点: Package, Core, Supply Voltage, Operating Temperature, Max CPU Speed.
クイック比較ツール — 並列比較する代替部品を選択:
DSPIC33EP256MU206-E/PT
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
DSPIC33EP64MU206-E/PT
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
DSPIC33EP128MU206-I/PT
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$3.91 / 個
データシートを見る →DSPIC33EP128MC206-I/PT
✅ ドロップイン✓ 在庫あり
$3.95 / 個
データシートを見る →DSPIC33EP128GM306-E/PT
✅ ドロップイン✓ 在庫あり
$6.15 / 個
データシートを見る →DSPIC33EP128MU206-E/PT 最大定格＆電気的特性
| Core | 16-bit dsPIC33E DSC core with DSP engine |
| Max CPU Speed | 70 MIPS |
| Flash Memory | 128 KB |
| RAM | 16 KB |
| Data EEPROM | 1 KB |
| ADC Resolution | 12-bit |
| On-Chip Op-Amps | 3 |
| USB Interface | USB 2.0 Full-Speed OTG |
| Communication Peripherals | UART, SPI, I2C |
| Motor Control PWM | Yes (MC PWM) |
| Quadrature Encoder Interface | Yes (QEI) |
| CTMU | Yes (charge time measurement unit) |
| 電源電圧 | 3.0 V to 3.6 V |
| 動作温度 | -40C to +125C (E grade) |
| パッケージ | TQFP-64 (10x10x1 mm) |
| 実装タイプ | Surface Mount |
| Packaging | Tray |
| Base Part Number | DSPIC33EP128MU206 |
DSPIC33EP128MU206-E/PT tqfp-64 (10x10x1 mm) ピン配置ガイド
DSPIC33EP128MU206-E/PT (tqfp-64 (10x10x1 mm) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: DSPIC33EP128MU206-E/PT.
詳細は データシート をご参照ください。
主な用途
DSPIC33EP128MU206-E/PT の用途: 6 件s: USB-Connected Industrial Sensors and Instruments, Motor Control and Drives, Digital Power Conversion, Embedded Audio and DSP Signal Processing, Touch Sensing and Human Interface, Data Loggers and Portable Test Equipment.
USB-Connected Industrial Sensors and Instruments
The DSPIC33EP128MU206-E/PT fits USB-connected instrumentation because it is one of the few dsPIC33EP devices integrating a full-speed USB 2.0 OTG module with a 70 MIPS DSP core and a 12-bit ADC. The three on-chip op-amps condition sensor outputs (strain gauges, thermocouple front ends, current shunts) before digitization, reducing external component count and board area. In a typical design, the DSC runs the USB device stack alongside a DSP filtering loop, sampling through the ADC and streaming processed data to a host PC. Because the -E grade covers -40C to +125C, the same PCB can serve both office-grade instruments and harsh factory-floor environments. Peripheral Pin Select lets engineers place UART/SPI pins optimally for auxiliary circuitry without hardware muxes.
おすすめ
Motor Control and Drives
The DSPIC33EP128MU206-E/PT supports motor control via its motor-control PWM module and quadrature encoder interface (QEI), executing field-oriented control (FOC) mathematics on the 70 MIPS DSP engine with single-cycle MAC instructions. Sensor feedback from encoders enters through the QEI while phase currents are sampled by the 12-bit ADC, optionally amplified by the three on-chip op-amps before conversion - removing external amplifier ICs from the current-sense path. Although the MC206 is the dedicated motor-control variant without USB, the MU206 is chosen when the drive must also expose a USB commissioning or diagnostics port. Careful PWM dead-time configuration and ADC-trigger synchronization with the PWM module are essential for accurate current sampling in each switching cycle.
おすすめ
Digital Power Conversion
In digital power supplies, PFC stages, and DC-DC converters, the DSPIC33EP128MU206-E/PT closes high-speed control loops using its 70 MIPS core, high-resolution PWM capability, and fast 12-bit ADC triggered directly from the PWM module. The CTMU (Charge Time Measurement Unit) supports precise time-interval and capacitance measurements useful in resonant converter diagnostics and protection schemes. The -E extended temperature rating of -40C to +125C suits power electronics enclosures where ambient heat is significant. Firmware typically implements voltage/current control loops at tens to hundreds of kHz update rates, with the DSP engine handling proportional-integral and compensator calculations deterministically. Peripheral Pin Select allows flexible assignment of PWM outputs and feedback inputs, simplifying power-stage layout trade-offs.
おすすめ
Embedded Audio and DSP Signal Processing
The 16-bit DSP engine with X and Y data memory buses, modulo and bit-reversed addressing makes the DSPIC33EP128MU206-E/PT effective for real-time filtering, spectral analysis, and light audio processing at 70 MIPS. FIR/IIR filters, Goertzel tone detection, and FFT-based analysis execute efficiently using hardware multiply-accumulate. The 128 KB flash holds lookup tables, coefficient sets, and communication stacks simultaneously, while 16 KB RAM supports double-buffered sample streams. USB OTG enables direct digital-audio transport to a host or feeding processed data to downstream devices via UART, SPI, or I2C through Peripheral Pin Select. For products needing fingerprint-level analog integration, the on-chip op-amps can implement anti-aliasing filters ahead of the 12-bit ADC.
おすすめ
Touch Sensing and Human Interface
The CTMU (Charge Time Measurement Unit) in the DSPIC33EP128MU206-E/PT enables capacitive touch sensing by measuring charge time on user-attached pads, supporting self- and mutual-capacitance methods under Microchip's touch-sensing libraries. The 70 MIPS core runs touch acquisition and decoding alongside application logic and a USB interface for configuration or HID-class device communication - useful for touch panels with USB connectivity in industrial HMI and appliance controls. The -E temperature grade permits deployment in appliances and outdoor equipment subject to wide thermal swings. The 12-bit ADC handles non-touch analog inputs such as slider potentiometers or temperature compensation sensors, and the three op-amps can buffer wet-electrode or long-trace signals before conversion.
おすすめ
Data Loggers and Portable Test Equipment
Handheld and portable test instruments benefit from the DSPIC33EP128MU206-E/PT combination of USB OTG (device or host roles for flash drives and PC links), 1 KB EEPROM for calibration constants, and a 12-bit ADC with on-chip op-amp front end. The low-power idle, doze, and sleep modes stretch battery life between acquisitions, while 70 MIPS throughput supports real-time DSP analysis such as RMS computation, peak detection, and frequency estimation. The 128 KB flash accommodates logging file systems and USB mass-storage stacks simultaneously. Extended -40C to +125C operation allows loggers mounted on machinery, vehicles, or outdoor assets without local heating. Peripheral Pin Select simplifies multi-revision hardware by remapping communication pins in software.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: DSPIC33EP128MU206-E/PT — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | DSPIC33EP256MU206-E/PT | DSPIC33EP64MU206-E/PT | DSPIC33EP128MC206-I/PT | DSPIC33EP128GM306-E/PT |
|---|---|---|---|---|---|
| Package | TQFP-64 (10x10 mm) | TQFP-64 (10x10 mm) - same | TQFP-64 (10x10 mm) - same | TQFP-64 (10x10 mm) - same | TQFP-64 (10x10 mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Flash Memory | 128 KB | 256 KB | 64 KB | 128 KB | 128 KB (dual partition) |
| RAM | 16 KB | 16 KB | 16 KB | 16 KB | 16 KB |
| USB OTG | Yes (full-speed) | Yes (full-speed) | Yes (full-speed) | No | No |
| Operating Temperature | -40C to +125C | -40C to +125C | -40C to +125C | -40C to +85C | -40C to +125C |
| Core Speed | 70 MIPS | 70 MIPS | 70 MIPS | 70 MIPS | 70 MIPS |
主な差別化要因
- Integrated USB 2.0 full-speed OTG （vs DSPIC33EP128MC206-I/PT)
- Extended temperature operation （vs DSPIC33EP128MC206-I/PT)
- Three on-chip operational amplifiers （vs DSPIC33EP64MU206-E/PT)
設計ノート
Provide one 100 nF ceramic decoupling capacitor at every VDD/VSS pin pair, placed within 2-3 mm of the pins, plus bulk 4.7-10 uF capacitance. Filter AVDD through an RC (e.g., 10 ohm + 1 uF) or ferrite bead from the digital 3.3 V rail to protect ADC accuracy from core switching noise. Route USB D+/D- as a 90-ohm differential pair of matched length with a solid ground reference under it. Keep MCLR, PGD, and PGC routed to a programming header for in-circuit debugging and ICSP production programming.
Peripheral Pin Select (PPS) must be explicitly configured in software before UART, SPI, I2C, or PWM outputs appear on routed pins - a locked (PPS-protected) write sequence is required to prevent accidental remapping. Analog pins default to analog mode at reset; forget to set TRIS/ANSEL registers and digital reads return 0. When using USB, VBUS must be sensed and the module configured per Microchip USB library requirements; an unpowered VBUS leaves the device enumerated but non-functional. Always check the latest device errata sheet before committing tape-out.
Estimated: at 70 MIPS with USB active, typical current draw is on the order of tens of milliamps (e.g., ~40-60 mA at 3.3 V), giving roughly 0.15-0.2 W of dissipation. With the TQFP-64 theta_JA on a standard 4-layer board (approximately 40-50 C/W depending on copper area), junction rise above ambient is typically under 10 C - well within the -40C to +125C rating. These figures are estimates; consult the family datasheet electrical characteristics tables for exact IDD values under your operating frequency and voltage.
コンプライアンス情報
Compliance status not stated in the provided web data. Verify RoHS/REACH status on the official Microchip product page or distributor compliance documents before production use.
