DSPIC33EP32MC502-E/MM - 16-bit 60MHz Motor Control DSC | Microchip
部品番号: DSPIC33EP32MC502-E/MM ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $4.62 | $4.62 |
| 10 | $4.16 | $41.60 |
| 100 | $3.7 | $370.00 |
| 500 | $3.33 | $1,665.00 |
| 1,000 | $2.98 | $2,980.00 |
DSPIC33EP32MC502-E/MM 概要
A digital signal controller combines the compute architecture of a microcontroller with the mathematical throughput of a DSP. In the power-management hierarchy of embedded systems, a DSC sits above general-purpose MCUs for control-loop-dominated tasks: it executes deterministic, high-frequency control algorithms such as field-oriented control (FOC) for electric motors, where cycle-accurate PWM generation and fast multiply-accumulate operations are mandatory.
Key features of the DSPIC33EP32MC502-E/MM include high-speed motor control PWM (MCPWM) peripherals with dead-time insertion, on-chip operational amplifiers and comparators for current-sense signal conditioning, a peripheral trigger generator (PTG) for autonomous sequencing, 4 DMA channels, and 5 timers. These peripherals offload the CPU, enabling tight single-shunt or three-shunt current loops without external analog circuitry.
The dsPIC33E core integrates DSP instructions (MAC, DSP multiply) with the enhanced mid-range peripheral ecosystem of Microchip's 16-bit platform. The -E/MM variant combines the extended automotive-style temperature rating with the thermally efficient QFN-S package, supporting high ambient-temperature industrial enclosures.
Typical applications include brushless DC (BLDC), permanent magnet synchronous (PMSM), and AC induction motor drives, digital power supplies such as LLC and PFC stages, and embedded motion control in HVAC, power tools, and e-mobility products.
A key design consideration: this part operates from a 2.5V to 3.6V single supply, so 5V current-sense signals require scaling or the on-chip op amps must be configured appropriately for the ADC input range.
This page synthesizes distributor pricing, same-footprint drop-in alternatives, and practical motor-control design notes not found in the manufacturer datasheet.
ドロップイン代替品: DSPIC33EP32MC502-E/MM — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: DSPIC33EP32MC502-E/MM （同一形状・フットプリント） — 相違点: Package, Operating Temperature, Qualification, Series, Supply Voltage.
クイック比較ツール — 並列比較する代替部品を選択:
DSPIC33EP64MC502-E/MM
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$3.05 / 個
データシートを見る →DSPIC33EP128MC502-E/MM
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$4.2 / 個
データシートを見る →DSPIC33EP32MC202-E/MM
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$2.3 / 個
データシートを見る →DSPIC33EP32GP502T-E/MM
✅ ドロップイン✓ 在庫あり
$2.98 / 個
データシートを見る →DSPIC33EP32MC502-I/MM
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
DSPIC33EP32MC502-E/MM 最大定格＆電気的特性
| Core Architecture | 16-bit dsPIC DSC |
| CPU Speed | 60 MHz |
| Core Performance | Up to 70 MIPS (dsPIC33E family) |
| Flash Program Memory | 32 KB |
| SRAM | 4 KB |
| DMA Channels | 4 |
| Timers | 5 |
| Motor Control PWM | Yes (MCPWM) |
| On-chip Op Amps | Yes |
| Comparators | Yes |
| Peripheral Trigger Generator | Yes (PTG) |
| 電源電圧 | 2.5 V to 3.6 V |
| 動作温度 | -40C to +125C |
| パッケージ | 28-QFN-S (6x6 mm), exposed pad |
| 実装タイプ | Surface Mount |
| ピン数 | 28 |
| Technology | CMOS |
DSPIC33EP32MC502-E/MM ピン構成
| ピン 1 | MCLR — Master clear reset input / programming voltage |
| ピン 2 | AN0/VREF+/CN2/RB0 — Analog input 0 / positive voltage reference |
| ピン 3 | AN1/VREF-/CN3/RB1 — Analog input 1 / negative voltage reference |
| ピン 4 | AN2/SS1/CN4/RB2 — Analog input 2 / SPI slave select |
| ピン 5 | AN3/CN5/RB3 — Analog input 3 |
| ピン 6 | AN4/CN6/RB4 — Analog input 4 |
| ピン 7 | VDD — Power supply (2.5V to 3.6V) |
| ピン 8 | VSS — Ground reference |
| ピン 9 | OSC1/CLKI/CN7/RA2 — Crystal oscillator input / external clock |
| ピン 10 | OSC2/CLKO/CN8/RA3 — Crystal oscillator output / clock output |
| ピン 11 | RP15/CN11/RB5 — Remappable peripheral pin / change notification |
| ピン 12 | RP14/CN12/RB6 — Remappable peripheral pin / change notification |
| ピン 13 | RP13/CN13/RB7 — Remappable peripheral pin / change notification |
| ピン 14 | RP12/CN14/RB8 — Remappable peripheral pin / change notification |
| ピン 15 | RP11/CN15/RB9 — Remappable peripheral pin / change notification |
| ピン 16 | RP10/PGD3/CN16/RB10 — Remappable pin / debug data channel 3 |
| ピン 17 | RP9/PGC3/CN17/RB11 — Remappable pin / debug clock channel 3 |
| ピン 18 | RP8/PGD2/CN18/RB12 — Remappable pin / debug data channel 2 |
| ピン 19 | RP7/PGC2/CN19/RB13 — Remappable pin / debug clock channel 2 |
| ピン 20 | VSS — Ground reference |
| ピン 21 | VDD — Power supply (2.5V to 3.6V) |
| ピン 22 | RP6/PGD1/CN24/RB14 — Remappable pin / primary debug data |
| ピン 23 | RP5/PGC1/CN25/RB15 — Remappable pin / primary debug clock |
| ピン 24 | RP4/CN1/RA0 — Remappable peripheral pin |
| ピン 25 | RP3/CN0/RA1 — Remappable peripheral pin |
| ピン 26 | RP2/AN6/CN9/RB1x — Remappable pin / analog input |
| ピン 27 | RP1/AN7/CN10 — Remappable pin / analog input |
| ピン 28 | AVDD/AVSS (EP) — Analog supply/ground; exposed pad connects to VSS |
主な用途
DSPIC33EP32MC502-E/MM の用途: 6 件s: Brushless DC (BLDC) Motor Drives, Digital Power Supplies (LLC / PFC), HVAC and Appliance Motion Control, Power Tools and E-Mobility, Solar Pump Inverters and Renewable Energy, Industrial Automation and Robotics.
Brushless DC (BLDC) Motor Drives
The DSPIC33EP32MC502-E/MM is purpose-built for BLDC and PMSM control: its MCPWM module produces complementary PWM pairs with hardware dead-time insertion, and the on-chip comparators implement cycle-by-cycle overcurrent limiting without CPU intervention. The 60 MHz (up to 70 MIPS) DSP core executes field-oriented control math comfortably at 20-50 kHz PWM frequencies, while the integrated op amps condition shunt-resistor current feedback directly into the ADC, eliminating external amplifier stages. Board designers typically pair it with a three-phase gate driver placed between the PWM outputs and the power MOSFET bridge; the exposed-pad QFN dissipates controller heat reliably in sealed motor housings up to +125C ambient.
おすすめ
Digital Power Supplies (LLC / PFC)
In digitally controlled AC-DC and DC-DC converters, this DSC handles PFC and LLC control loops with its high-resolution MCPWM and fast ADC triggered via the PTG for deterministic sampling instants aligned to switching events. The 70 MIPS core sustains voltage-mode or current-mode compensation at 100-500 kHz switching frequencies, and hardware comparators provide instant cycle-skipping or burst-mode protection. The 32 KB Flash accommodates full compensator firmware plus PMBus-style communication. Because the QFN exposed pad bonds to VSS, the power-ground reference stays clean; place the controller away from the LLC resonant tank and keep the ADC sense traces Kelvin-connected to the shunt resistors.
おすすめ
HVAC and Appliance Motion Control
Fan, compressor, and pump motors in HVAC systems and white goods benefit from sensorless FOC running on this DSC: the extended -40C to +125C rating covers outdoor condenser units and oven-adjacency environments, and sensorless algorithms (sliding-mode or back-EMF observers) fit comfortably in 32 KB Flash with headroom for communication. On-chip op amps enable single-shunt current sensing, cutting BOM cost versus three-shunt designs. The PTG offloads repetitive ADC/PWM sequencing so the CPU concentrates on the speed loop. Energy-efficiency regulations make quiet, efficient variable-speed operation mandatory; Microchip explicitly targets this family at quieter, longer-life motor systems.
おすすめ
Power Tools and E-Mobility
Cordless drill, e-bike, and scooter controllers demand compact, thermally robust control electronics. The 6x6 mm QFN-S fits dense controller boards constrained by handle geometry, and the -E temperature grade tolerates motor-compartment heat plus -40C cold starts for outdoor equipment. The 60 MHz core closes current loops fast enough for torque-ripple-free FOC on hub motors, and hardware comparators protect MOSFETs within microseconds of an overcurrent event, critical when a stalled rotor spikes phase current. Designers typically combine it with a step-down regulator for the 3.3V rail and gate drivers rated for the pack voltage; watchdog and brown-out modules safeguard firmware integrity under battery sag.
おすすめ
Solar Pump Inverters and Renewable Energy
Solar-powered water pumping requires a variable-frequency drive that maximizes energy harvest across irradiance conditions; this DSC runs maximum-power-point tracking plus sensorless motor control concurrently on its 70 MIPS core. The extended temperature range suits rooftop and desert installations, while 32 KB Flash holds MPPT, motor FOC, and fault-logging firmware with room for dry-run and tank-full logic. Hardware comparators implement instantaneous overcurrent shutdown for dry-run and locked-rotor events. The QFN-S exposed pad simplifies thermal design in sealed IP65 enclosures. Pair with an isolated gate driver and an I2C or UART link to a panel-level telemetry module for remote monitoring.
おすすめ
Industrial Automation and Robotics
In factory automation, this DSC drives servo-style axes, conveyor motors, and robotic joint actuators with deterministic FOC loops, while its DMA channels stream ADC samples without CPU loading and 5 timers coordinate multi-axis synchronization. UART, SPI, and I2C interfaces connect to encoders, and the PTG sequences peripheral operations autonomously for consistent loop timing. The 60 MHz clock supports position-loop rates beyond typical 10 kHz servo update frequencies, and the on-chip op amps condition resolver or hall-sensor signals. The -E temperature grade covers hot control cabinets. Microchip's MCHV-2 development board supports this family for rapid motor-control prototyping before PCB commit.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: DSPIC33EP32MC502-E/MM — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | DSPIC33EP64MC502-E/MM | DSPIC33EP128MC502-E/MM | DSPIC33EP32GP502T-E/MM | DSPIC33EP32MC202-E/MM |
|---|---|---|---|---|---|
| Package | 28-QFN-S (6x6 mm) | 28-QFN-S (6x6 mm) - same | 28-QFN-S (6x6 mm) - same | 28-QFN-S (6x6 mm) - same | 28-QFN-S (6x6 mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Flash Memory | 32 KB | 64 KB | 128 KB | 32 KB | 32 KB |
| SRAM | 4 KB | 8 KB | 16 KB | 4 KB | 4 KB |
| CPU Clock | 60 MHz | 60 MHz | 60 MHz | 60 MHz | 60 MHz |
| Operating Temperature | -40C to +125C | -40C to +125C | -40C to +125C | -40C to +125C | -40C to +125C |
| Motor Control Peripherals (MCPWM/Op Amps) | Yes | Yes | Yes | No (GP peripheral set) | Yes (reduced set) |
主な差別化要因
- Extended temperature grade （vs DSPIC33EP32MC502-I/MM)
- Dedicated motor-control peripheral set （vs DSPIC33EP32GP502T-E/MM)
- Flash headroom upgrade path on same footprint （vs DSPIC33EP128MC502-E/MM)
設計ノート
The 28-QFN-S exposed pad is thermally and electrically tied to VSS. Solder it to a ground pour with an array of at least 9 vias to inner/outer ground planes; this is the primary heat removal path and omitting it can raise junction temperature by tens of degrees at full 60 MHz operation. Keep AVDD/AVSS on a separate filtered supply node via an LC or ferrite filter from VDD so ADC accuracy is not degraded by digital switching noise.
This DSC operates from 2.5V to 3.6V. In motor-drive systems powered from 12V, 24V, or 48V buses, use a dedicated LDO or buck for the 3.3V rail and add a bulk capacitor near the part plus 100 nF ceramics at each VDD pin. Enable brown-out reset at an appropriate trip point: during battery sag (common in power tools), an undervoltage core can corrupt Flash or mis-fire PWM gates into a short circuit.
Peripheral pin select (PPS) means UART/SPI/PWM functions must be explicitly mapped to RP pins in firmware before use; copying register configurations from the SOIC/S PDIP variant schematics without verifying the MM package pin map will mis-route signals. Also note the MM QFN-28 pinout differs from the SOIC-28 - the two are not footprint-compatible. Configure dead-time in the MCPWM module before enabling outputs to prevent shoot-through in the gate-driver stage.
コンプライアンス情報
Compliance data was not explicitly provided in the retrieved web data. Current-production Microchip parts are typically RoHS/lead-free compliant; verify against Microchip's official product page or the distributor compliance certificate.
