DSPIC33EP64GS502-E/MX - 16-bit 70MIPS DSC, 64KB Flash | Microchip
部品番号: DSPIC33EP64GS502-E/MX ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $0 | $0.00 |
| 10 | $0 | $0.00 |
| 100 | $0 | $0.00 |
| 500 | $0 | $0.00 |
| 1,000 | $0 | $0.00 |
DSPIC33EP64GS502-E/MX 概要
A digital signal controller combines the computational throughput of a DSP with the peripheral integration and ease of use of a microcontroller. Within the power-management hierarchy, the dsPIC33EP family of DSCs sits at the heart of digital power conversion systems, where it replaces analog control loops with firmware-based control (SMPS control, PFC, digital power supplies), sampling sensor data through high-speed ADCs and driving power stages through dedicated PWM hardware.
Key features of the GS50x family include a high-speed, interconnected 12-bit ADC with a programmable gain amplifier (PGA), an on-chip 12-bit DAC, comparators, and a high-resolution PWM module purpose-built for switching power supplies. The interconnection fabric allows ADC, PWM, DAC, and comparators to trigger each other with minimal CPU latency, a defining characteristic of the dsPIC33EPXXGS50X family.
Architecturally, the device uses a 16-bit modified Harvard core with DSP instructions, executing from zero-wait-state Flash at 70 MIPS. The dedicated digital power peripherals (high-speed PWM with dead-time control, 12-bit ADC with multiple sample-and-hold channels, integrated comparators) form a tight analog-to-PWM loop essential for peak-current-mode and voltage-mode control at high switching frequencies.
Typical applications include switched-mode power supplies (SMPS), power factor correction (PFC) converters, digital lighting ballasts, battery chargers, and uninterruptible power supplies. Microchip's Interleaved PFC reference design, producing up to 350 W from universal AC input, is based on this controller family.
Design consideration: the -E extended-temperature variant should be chosen when ambient conditions exceed the industrial -40C to +85C window; verify package thermal resistance for the SPDIP housing at full clock speed.
This page synthesizes distributor listings, family datasheet context, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
ドロップイン代替品: DSPIC33EP64GS502-E/MX — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: DSPIC33EP64GS502-E/MX （同一形状・フットプリント） — 相違点: Package, Core Architecture, Operating Temperature, Mounting Type, Functional Safety.
クイック比較ツール — 並列比較する代替部品を選択:
DSPIC33EP64GS502-I/MX
✅ ドロップイン✓ 在庫あり
価格はお問い合わせください
データシートを見る →DSPIC33EP32GS502-E/MX
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$3.95 / 個
データシートを見る →DSPIC33EP32GS502-I/MX
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
DSPIC33EP64GS502-E/MX 最大定格＆電気的特性
| Core | dsPIC33EP 16-bit DSC |
| Maximum Processing Speed | 70 MIPS |
| Program Memory (Flash) | 64 KB (64K x 8) |
| RAM | 8 KB |
| ADC Resolution | 12-bit |
| DAC Resolution | 12-bit |
| Target Applications | Digital power / SMPS |
| Peripherals | High-Speed PWM, ADC, PGA, Comparators |
| Connectivity | I2C (per family peripherals) |
| パッケージ | 28-pin SPDIP (MX) |
| 実装タイプ | Through Hole |
| 動作温度 | -40C to +125C (extended, -E) |
| Programmability | In-Circuit Serial Programming (ICSP) |
| Functional Safety | dsPIC33EP FuSa (Functional Safety) supported family |
| Core Voltage | 3.3 V (per dsPIC33EP family) |
DSPIC33EP64GS502-E/MX 28-pin spdip (mx) ピン配置ガイド
DSPIC33EP64GS502-E/MX (28-pin spdip (mx) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: DSPIC33EP64GS502-E/MX.
詳細は データシート をご参照ください。
主な用途
DSPIC33EP64GS502-E/MX の用途: 6 件s: Switched-Mode Power Supplies (SMPS), Power Factor Correction (PFC) Converters, Digital Lighting Ballasts and LED Drivers, Battery Chargers, Uninterruptible Power Supplies (UPS), Solar Micro-Inverters and DC-DC Power Optimizers.
Switched-Mode Power Supplies (SMPS)
The DSPIC33EP64GS502-E/MX is purpose-built for firmware-based SMPS control. Its interconnected high-speed PWM with dead-time and high-resolution control drives buck, boost, and flyaway power stages, while the 12-bit ADC with PGA samples output voltage and inductor current each switching cycle. Integrated comparators provide cycle-by-cycle overcurrent trip independent of CPU latency, protecting the converter during transients. Because the ADC-to-PWM path is hardwired, control-loop latency stays low even at several-hundred-kHz switching frequencies. Compared with analog controllers, firmware control enables soft-start profiles, adaptive compensation, and telemetry over I2C. Designers should budget CPU cycles for loop execution at 70 MIPS and verify junction temperature in the SPDIP package near hot power stages.
おすすめ
Power Factor Correction (PFC) Converters
Microchip's Interleaved PFC reference design, delivering up to 350 W from a universal AC input, demonstrates the dsPIC33EPXXGS50X family in PFC front ends. The DSPIC33EP64GS502-E/MX computes input current shaping with DSP multiply-accumulate instructions at 70 MIPS, samples the rectified input and inductor currents through the 12-bit ADC/PGA, and controls interleaved boost phases with multiple high-resolution PWM outputs. The 12-bit DAC can generate current-reference waveforms synchronized to the AC line. Firmware PFC achieves high power factor across wide load ranges and adapts compensation digitally, which fixed analog control cannot. Ensure the -E extended temperature rating and SPDIP thermal path match the enclosure ambient near the bridge rectifier.
おすすめ
Digital Lighting Ballasts and LED Drivers
In HID ballasts and high-power LED drivers, the DSPIC33EP64GS502-E/MX provides both constant-current regulation and lamp ignition sequencing in one device. The interconnected high-speed PWM generates the switching and ignition-frequency ramps, the 12-bit ADC monitors LED string current and thermals, and the comparators implement fast overcurrent protection for shorted-string events. The on-chip 12-bit DAC can produce dimming reference levels without external parts. At 70 MIPS the controller runs lamp model algorithms and the control loop concurrently. The -E temperature rating supports enclosed luminaires where ambient near the driver PCB exceeds +85C, and the through-hole SPDIP package suits lamp ballast boards assembled with mixed technology.
おすすめ
Battery Chargers
Smart battery chargers benefit from the DSPIC33EP64GS502-E/MX combination of DSP control and analog integration. The 12-bit ADC with PGA measures charge current and pack voltage precisely, enabling CC/CV, trickle, and taper profiles in firmware, while the high-speed PWM drives the buck or flyback charge stage with controlled dead time. Integrated comparators provide hardware overcurrent and reverse-polarity protection independent of software, and the 12-bit DAC can synthesize charge-current references. I2C connectivity supports battery gauges and host communication. The -E extended range covers chargers in hot environments such as engine bays, and 64 KB Flash stores multiple chemistry algorithms with room for logging.
おすすめ
Uninterruptible Power Supplies (UPS)
Line-interactive and double-conversion UPS designs use the DSPIC33EP64GS502-E/MX to control the inverter bridge, AC-DC front end, and transfer logic in a single 16-bit DSC. The high-resolution interconnected PWM generates sinusoidal inverter modulation, the 12-bit ADC samples output voltage, battery voltage, and current through the PGA, and comparators protect against overload transients faster than any interrupt-driven routine. At 70 MIPS with DSP instructions, the controller closes the inverter voltage loop and manages battery charge concurrently. The -E rating tolerates battery-compartment ambient temperatures above +85C, and the through-hole SPDIP option simplifies servicing in industrial UPS frames.
おすすめ
Solar Micro-Inverters and DC-DC Power Optimizers
Photovoltaic power electronics require MPPT (maximum power point tracking) algorithms running alongside a fast DC-DC control loop - exactly the workload the DSPIC33EP64GS502-E/MX was designed for. The 12-bit ADC and PGA sample panel voltage and current for the perturb-and-observe MPPT routine, while the interconnected high-speed PWM regulates the boost or flyback stage with cycle-level updates. Comparators add hardware overcurrent limits for panel fault conditions. The 70 MIPS DSP core leaves ample headroom for MPPT, safety checks, and communication. Outdoor-mounted optimizer electronics benefit from the -E grade (-40C to +125C), and the SPDIP through-hole package suits conformal-coated, serviceable converter boards.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: DSPIC33EP64GS502-E/MX — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | DSPIC33EP64GS502-I/MX | DSPIC33EP32GS502-E/MX | DSPIC33EP64GS502-E/MM |
|---|---|---|---|---|
| Package | 28-pin SPDIP (MX) | 28-pin SPDIP (MX) - same | 28-pin SPDIP (MX) - same | 28-QFN-S (6x6) - different footprint |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Flash Memory | 64 KB | 64 KB | 32 KB | 64 KB |
| RAM | 8 KB | 8 KB | 8 KB | 8 KB |
| Core Speed | 70 MIPS | 70 MIPS | 70 MIPS | 60-70 MIPS (per distributor listing) |
| Operating Temperature | -40C to +125C (E) | -40C to +85C (I) | -40C to +125C (E) | -40C to +125C (E) |
| Digital Power Peripherals (PWM/ADC/PGA/Comparators) | Yes | Yes | Yes | Yes |
| Target Application | Digital power / SMPS | Digital power / SMPS | Digital power / SMPS | Digital power / SMPS (SMT) |
主な差別化要因
- Extended temperature range up to +125C （vs DSPIC33EP64GS502-I/MX)
- Double the program memory （vs DSPIC33EP32GS502-E/MX)
- Through-hole serviceability （vs DSPIC33EP64GS502-E/MM)
設計ノート
Package compatibility is the dominant selection risk in this family: -MX is 28-pin SPDIP, -MM is 28-QFN-S (6x6), and -2N is 28-UQFN (6x6). These are NOT interchangeable on a PCB despite sharing the same die and pin functions. Confirm the footprint suffix before ordering replacements. Also note that -E parts are rated to +125C ambient, but the through-hole SPDIP package has higher thermal resistance than the QFN, so junction temperature at 70 MIPS must be verified against the datasheet thermal data for your airflow and board conditions.
Like all dsPIC33EP devices, this DSC runs from a 3.3 V supply (verify the exact operating range in the family datasheet 70005127d). In digital power converters, isolate the DSC analog supply from the power-stage switching noise: use ferrite beads or RC filters on AVDD, and follow Microchip's family datasheet decoupling recommendations. The ADC/PGA accuracy driving the control loop depends directly on analog supply quality, so a clean analog rail measurably improves converter output regulation and transient response.
Estimated: a 28-pin SPDIP in a sealed enclosure at +105C ambient running the core at 70 MIPS will have a junction-to-ambient rise determined by the SPDIP theta-JA from the datasheet; with only tens of mA of core current this rise is typically modest, but if the DSC is mounted on the same PCB as a hot power stage or heatsinked component, radiated and conducted heat can push junction temperature beyond the +125C rating. Place the controller away from hot components and verify with a thermal measurement in the final enclosure.
コンプライアンス情報
Compliance status not stated in the provided web data; verify on the Microchip product page or the distributor RoHS certificate for this exact MPN.
