EFM32G200F64-QFN32T - 32MHz Cortex-M3 MCU | Silicon Labs
部品番号: EFM32G200F64-QFN32T ✓ 生産中EFM32G200F64-QFN32T 概要
A microcontroller is a programmable system-on-chip that combines a processor core, nonvolatile program memory, volatile data memory, peripherals, and communication interfaces on one device. The EFM32G200 belongs to the Gecko family of 32-bit microcontrollers, within the broader hierarchy of embedded processors and semiconductor devices. Its Cortex-M3 core provides a 32-bit architecture suited to event-driven control, monitoring, communications, and general embedded product functions.
The device includes 64 kB of flash for firmware and 16 kB of RAM for working data. It operates at speeds up to 32 MHz and provides two 16-bit timers along with 24 digital I/O pins. The manufacturer product page specifically identifies low-energy operation, fast wake-up behavior, and energy-saving modes as core platform characteristics. These functions are important in systems that spend substantial time between intermittent activity events.
The EFM32G200F64 architecture combines a Cortex-M3 processor with the Silicon Labs Gecko low-power platform. The 64 kB flash configuration provides more program storage than lower-density family members while retaining the same 32 MHz processing class. Its 16 kB RAM supports working buffers, stack space, protocol state, and application data without requiring external memory in designs whose working set remains within that limit.
Typical applications include battery-powered sensors, compact industrial controllers, connected equipment, environmental monitors, and low-power IoT nodes. In these systems, the fast wake-up behavior can reduce the time required to react to sensor, user, or communications events. The 24 I/O pins also provide practical connectivity for digital inputs, outputs, status indicators, and common peripheral interfaces in space-constrained assemblies.
PCB design should preserve the QFN-32 land pattern, exposed-pad thermal requirements, and manufacturer-specified decoupling recommendations. Keep supply and ground connections compact, route sensitive signals away from noisy switching nodes, and connect the exposed pad to the intended thermal and ground copper structure. Validate the final decoupling values and pin assignments against the current Silicon Labs documentation for the exact ordering code.
ドロップイン代替品: EFM32G200F64-QFN32T — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: EFM32G200F64-QFN32T (同一形状・フットプリント) — 相違点: Flash Memory, Package, Digital I/O Pins, RAM, Series.
EFM32G200F64-QFN32
✅ ドロップイン価格はお問い合わせください
データシートを見る →EFM32G200F64G-E-QFN32
✅ ドロップイン価格はお問い合わせください
データシートを見る →EFM32G200F32G-E-QFN32
✅ ドロップイン📋 参考代替品(カタログ未掲載)
EFM32G200F16G-E-QFN32
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
EFM32G200F64G-QFN32
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
EFM32G200F64-QFN32T 最大定格&電気的特性
| Product Type | 32-bit ARM Cortex-M3 microcontroller |
| Processor Core | ARM Cortex-M3 |
| Maximum Clock Speed | 32 MHz |
| Flash Memory | 64 kB |
| RAM | 16 kB |
| Digital I/O Pins | 24 pins |
| Timer Count | 2 timers |
| Timer Resolution | 16-bit |
| Supply Voltage Range | 1.85 V to 3.8 V |
| パッケージ | 32-QFN (6 x 6 mm) |
| 実装タイプ | Surface mount |
| Architecture | ARM 32-bit |
| Series | EFM32 Gecko |
| AES Hardware Support | No AES |
EFM32G200F64-QFN32T 32-qfn (6 x 6 mm) ピン配置ガイド
EFM32G200F64-QFN32T (32-qfn (6 x 6 mm) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: EFM32G200F64-QFN32T.
詳細は データシート をご参照ください。
主な用途
EFM32G200F64-QFN32T の用途: 6 件s: Battery-Powered Environmental Sensors, Industrial Condition Monitoring, Low-Power IoT Sensor Nodes, Compact Control and Automation Panels, Smart Home and Building Nodes, Battery Management and Portable Instruments.
Battery-Powered Environmental Sensors
The EFM32G200F64-QFN32T fits compact environmental sensors because it combines a 32 MHz ARM Cortex-M3 core with 64 kB of flash, 16 kB of RAM, and a low-power Gecko platform. Its fast wake-up behavior and energy-saving modes are useful when the device samples temperature, humidity, or gas sensors only at scheduled intervals. The 24 digital I/O pins can support sensor enables, alarms, status indicators, and external measurement triggers. A 1.85 V to 3.8 V operating range also supports low-voltage battery and regulated-sensor rails. Firmware should keep active processing short and place the MCU into the appropriate low-energy mode between measurement events.
おすすめ
Industrial Condition Monitoring
The EFM32G200F64-QFN32T is appropriate for industrial monitoring modules that must evaluate sensor inputs without a high-power processor. Its Cortex-M3 architecture supports 32-bit processing, while two 16-bit timers provide timing resources for periodic sampling, debounce timing, motor or relay timing, and watchdog-related monitoring. The 64 kB flash allows local firmware, thresholds, and diagnostic logic to be stored on the MCU. Its 32-QFN 6 x 6 mm package helps reduce board area in distributed equipment. For electrically noisy industrial environments, the PCB should include appropriate filtering, grounding, and supply-decoupling measures around the MCU and sensor inputs.
おすすめ
Low-Power IoT Sensor Nodes
The EFM32G200F64-QFN32T supports compact IoT sensor nodes that periodically collect and process local information. The Gecko platform's energy-saving modes and fast wake-up times are central to reducing power when a node is inactive, while the Cortex-M3 core provides enough performance for protocol framing, data filtering, and state management. Its 64 kB flash can retain application firmware and configuration logic, and the 16 kB RAM supports packet buffers and working variables. The 24 digital I/O pins permit connections to sensors, radios, indicators, and user controls. Firmware and radio activity should be coordinated so that peripherals do not prevent the MCU from entering its intended low-power state.
おすすめ
Compact Control and Automation Panels
The EFM32G200F64-QFN32T can serve as the controller in a compact keypad, configuration panel, or local automation module. Its 32 MHz Cortex-M3 core manages control logic, while the 24 digital I/O pins accommodate button inputs, relay or indicator outputs, and digital status signals. Two 16-bit timers support periodic control tasks, debounce intervals, and timing sequences without relying on software delays. The 32-QFN 6 x 6 mm footprint preserves board area in space-constrained enclosures, and the 64 kB flash accommodates interface and control firmware. Layout should isolate sensitive control inputs from switching outputs and provide stable decoupling at the supply pins.
おすすめ
Smart Home and Building Nodes
The EFM32G200F64-QFN32T is useful for smart-home endpoints that coordinate local inputs, indicators, and low-rate communications. Its low-power platform supports duty-cycled operation, which is important for battery-powered door sensors, room controls, and occupancy nodes. The 64 kB flash and 16 kB RAM provide enough capacity for local configuration, protocol state, and event processing without requiring a separate processor. Twenty-four digital I/O pins support push buttons, alarm outputs, and peripheral control signals. Because the device has no AES hardware, applications requiring hardware-assisted encryption require a different device or an external security component. The 3.8 V maximum supply also requires a regulator or source that stays within that limit.
おすすめ
Battery Management and Portable Instruments
The EFM32G200F64-QFN32T fits portable instruments where low standby consumption, compact size, and deterministic embedded control are important. Its 1.85 V to 3.8 V supply range accommodates low-energy rails, while fast wake-up allows the system to respond to user activity or measurement events without continuous high-power processing. The 64 kB flash supports instrument firmware and calibration logic, and the 16 kB RAM can hold display, measurement, and interface state. The QFN-32 package reduces occupied board area compared with larger leaded packages. Designers should account for the exposed thermal pad, maintain the specified decoupling network, and verify battery-regulation behavior over the complete discharge range.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: EFM32G200F64-QFN32T — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | EFM32G200F64-QFN32 | EFM32G200F64G-E-QFN32 | EFM32G200F32G-E-QFN32 | EFM32G200F16G-E-QFN32 | EFM32G200F64G-QFN32 |
|---|---|---|---|---|---|---|
| Package | 32-QFN (6 x 6 mm) | 32-QFN (6 x 6 mm) - same | 32-QFN (6 x 6 mm) - same | 32-QFN (6 x 6 mm) - same | 32-QFN (6 x 6 mm) - same | 32-QFN (6 x 6 mm) - same |
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Flash Memory | 64 kB | 64 kB | 64 kB | 32 kB | 16 kB | 64 kB |
主な差別化要因
- Full 64 kB program memory in the Gecko QFN-32 footprint (vs EFM32G200F32G-E-QFN32)
- Lower minimum supply threshold than the G-E ordering option (vs EFM32G200F64G-E-QFN32)
- More firmware space for update-capable embedded products (vs EFM32G200F16G-E-QFN32)
設計ノート
Follow the manufacturer QFN-32 land pattern and thermal-pad layout exactly, including the exposed pad, paste geometry, and copper treatment. Place the input and output decoupling capacitors close to their associated supply pins, with the shortest practical return path to the ground structure. Do not route high-current or fast-switching signals beneath the MCU, where coupling could disturb sensitive timing, reset, or communication signals.
The EFM32G200F64-QFN32T operates from 1.85 V to 3.8 V, so the source and regulator must remain within that interval under load, startup, and transient conditions. Account for voltage drop across source resistance and verify brownout behavior near the lower operating limit. For battery-powered designs, check whether the MCU's wake-up and operating currents support the intended duty cycle before finalizing the energy budget.
Separate analog or sensor inputs from digital outputs and switching-power nodes, especially on compact boards containing the QFN-32 MCU. Keep the reset path short and free of aggressive capacitive loading. Use a continuous ground reference beneath and around the device, and place thermal-pad vias according to the manufacturer's package guidance so heat can leave the exposed pad without introducing unintended copper connections.
Do not select a lower-flash family member solely because it shares the QFN-32 outline. EFM32G200F32G-E-QFN32 has 32 kB of flash and EFM32G200F16G-E-QFN32 has 16 kB, compared with 64 kB for the target device. Confirm compiled firmware size, bootloader requirements, future update space, and the exact supply-voltage range before treating either lower-density part as a production substitute.
コンプライアンス情報
No explicit compliance declaration for the exact EFM32G200F64-QFN32T ordering code was identified in the cited product information.