EFM32TG108F16-D-QFN24 - 32MHz Cortex-M3 MCU | Silicon Labs
部品番号: EFM32TG108F16-D-QFN24 ✓ 生産中EFM32TG108F16-D-QFN24 概要
A microcontroller is a programmable semiconductor device that integrates a processor core, memory, digital I/O, timers, and communication peripherals into one compact component. The EFM32TG108 belongs to the Tiny Gecko family within the hierarchy of ARM Cortex microcontrollers, general-purpose embedded processors, and integrated semiconductor devices. Its compact package is intended to support space-constrained and battery-powered equipment.
Principal features include a 32-bit ARM Cortex-M3 core, 16 KB Flash, 4 KB RAM, 17 digital I/O pins, and two 16-bit timers. The device operates from a 1.98 V to 3.8 V supply. Silicon Labs reports consumption as low as 0.6 µA in Stop mode and 150 µA/MHz in Run mode, making low-power state management important for duty-cycled designs.
The Tiny Gecko platform emphasizes fast wake-up behavior, energy-saving operating modes, and autonomous peripheral operation. These characteristics allow timers and other peripherals to handle repetitive or time-critical tasks while the processor sleeps, reducing unnecessary software activity. The same 16 KB Flash configuration supports firmware storage, while the 4 KB RAM provides working memory for control routines, state handling, and short data buffers.
Typical uses include connected sensor nodes, industrial monitoring modules, compact instrumentation, low-energy IoT equipment, and embedded control boards. The 17 GPIO pins allow the MCU to connect digital sensors, switches, status indicators, and actuators, while the two 16-bit timers support periodic measurement, timing, and event-counting functions.
PCB design should preserve a clean return path around the exposed pad and place bypass capacitors close to the supply pins. Firmware should use the device's low-power modes deliberately, and every peripheral should be checked against its clock-gating behavior to ensure that current consumption matches the intended duty cycle.
This page combines the manufacturer specifications with practical power-management guidance, interface considerations, and a focused comparison of same-family devices. It is designed to help engineers evaluate the EFM32TG108F16-D-QFN24 for low-power embedded systems without overlooking package, memory, or firmware constraints.
ドロップイン代替品: EFM32TG108F16-D-QFN24 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: EFM32TG108F16-D-QFN24 (同一形状・フットプリント) — 相違点: Flash Memory, Supply Voltage Range, Digital I/O Pins, Package, Processor Core.
EFM32TG108F32-QFN24
✅ ドロップイン価格はお問い合わせください
データシートを見る →EFM32TG108F16-QFN24
✅ ドロップイン価格はお問い合わせください
データシートを見る →EFM32TG108F16-D-QFN24 最大定格&電気的特性
| Product Type | 32-bit ARM Cortex-M3 microcontroller |
| Manufacturer | Silicon Labs |
| Series | EFM32 Tiny Gecko |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 16 KB |
| RAM | 4 KB |
| Digital I/O Pins | 17 pins |
| Timers | 2 x 16-bit timers |
| Supply Voltage Range | 1.98 V to 3.8 V |
| Stop Mode Current | 0.6 µA |
| Run Mode Current | 150 µA/MHz |
| Processor Core | ARM Cortex-M3 |
| GPIO Organization | 16-bit ports identified by letters A through F |
| パッケージ | 24-QFN, 5 mm x 5 mm |
| 実装タイプ | Surface mount |
| RoHS ステータス | Compliant |
| Bromine and Antimony Content | Free of Br and Sb |
EFM32TG108F16-D-QFN24 24-qfn, 5 mm x 5 mm ピン配置ガイド
EFM32TG108F16-D-QFN24 (24-qfn, 5 mm x 5 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: EFM32TG108F16-D-QFN24.
詳細は データシート をご参照ください。
主な用途
EFM32TG108F16-D-QFN24 の用途: 6 件s: Battery-Powered Sensor Nodes, Industrial Monitoring Modules, Connected IoT Equipment, Compact Test and Measurement Products, Low-Energy Lighting Controllers, Portable Medical and Wellness Devices.
Battery-Powered Sensor Nodes
The EFM32TG108F16-D-QFN24 fits compact, duty-cycled sensor nodes because it combines a 32 MHz ARM Cortex-M3 core with Stop-mode current as low as 0.6 µA. Its 17 digital I/O pins can connect simple sensors, switches, and status indicators, while two 16-bit timers support periodic sampling and event counting. Place the MCU between the sensor interface and a 1.98 V to 3.8 V power rail, and size the input and output bypass capacitors close to the package. The principal trade-off is only 16 KB of Flash, so firmware must avoid unnecessary libraries and duplicated tables.
おすすめ
Industrial Monitoring Modules
The EFM32TG108F16-D-QFN24 is suitable for compact industrial monitoring modules that combine digital sensing with a low-power controller. Its 17 GPIO pins support discrete inputs, alarm outputs, and status signals, while the two 16-bit timers can implement sampling intervals or pulse-width measurements. The 32 MHz Cortex-M3 core provides enough performance for local control without a larger system-on-chip. Keep sensitive signal paths away from the MCU supply pins and maintain a low-impedance ground plane. For applications requiring larger embedded firmware, the same-package EFM32TG108F32-QFN24 provides 32 KB of Flash.
おすすめ
Connected IoT Equipment
The EFM32TG108F16-D-QFN24 can serve as the low-power control MCU in a compact connected device that leaves radio transmission to a separate communications component. The MCU manages sensor conditioning, local state, timers, and data framing within 16 KB of Flash and 4 KB of RAM. Its low-power platform and fast wake-up behavior support designs that remain inactive between transmissions. Firmware should disable unused peripherals and leverage Stop mode to control consumption. If the communication stack and application code together exceed 16 KB, select the 32 KB Flash EFM32TG108F32-QFN24 instead.
おすすめ
Compact Test and Measurement Products
The EFM32TG108F16-D-QFN24 can control a portable measurement product when the instrument relies on digital stimulus, switching, status display, and timing functions rather than extensive analog processing. The 32 MHz ARM Cortex-M3 core supports responsive control logic, the two 16-bit timers support accurate interval and event functions, and the 17 GPIO pins connect relays, indicators, and digital interfaces. Use separate analog and digital ground partitioning where the board supports sensitive measurements. The 16 KB Flash limit makes this configuration most appropriate for focused instruments with compact firmware.
おすすめ
Low-Energy Lighting Controllers
The EFM32TG108F16-D-QFN24 is appropriate for compact lighting controllers that schedule switching, monitor enable inputs, and coordinate multiple digital outputs. Its 17 GPIO pins provide sufficient I/O for LEDs, pushbuttons, and status functions, while the timer resources support repeatable timing sequences. The MCU's low-power operating modes are especially useful in continuously powered fixtures where standby consumption matters. Drive LED current through suitable external circuitry rather than the GPIO pins, and confirm the external transistor and resistor network independently. The same 24-QFN footprint permits evaluation with EFM32TG108F32-QFN24 if control code grows.
おすすめ
Portable Medical and Wellness Devices
The EFM32TG108F16-D-QFN24 can serve as a low-power controller in a portable wellness device that uses digital buttons, simple sensors, and status feedback. The compact 5 mm by 5 mm QFN package preserves board area, while Stop-mode current as low as 0.6 µA supports designs that spend substantial time idle. The 17 GPIO pins and two 16-bit timers provide control and timing resources without requiring a larger MCU. Validate all measurement accuracy, safety isolation, and regulatory requirements independently, and do not treat low standby current as a substitute for medical-grade validation.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: EFM32TG108F16-D-QFN24 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | EFM32TG108F32-QFN24 | EFM32TG108F16-QFN24 |
|---|---|---|---|
| Brand | Silicon Labs | Silicon Labs | Silicon Labs |
| Package | 24-QFN (5x5) | 24-QFN (5x5) | 24-QFN (5x5) |
| Processor Core | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 |
| Maximum CPU Frequency | 32 MHz | 32 MHz | 32 MHz |
| Flash Memory | 16 KB | 32 KB | 16 KB |
| RAM | 4 KB | 4 KB | 4 KB |
| Digital I/O Pins | 17 pins | 17 pins | 17 pins |
| Timers | 2 x 16-bit timers | 2 x 16-bit timers | 2 x 16-bit timers |
| Low-Power Platform | Tiny Gecko | Tiny Gecko | Tiny Gecko |
主な差別化要因
- Lower Flash capacity keeps the device focused on compact embedded control (vs EFM32TG108F32-QFN24)
- Base same-family ordering option supports footprint reuse (vs EFM32TG108F32-QFN24)
- Low-power operation supports compact embedded equipment (vs EFM32TG108F16-QFN24)
設計ノート
Place the input bypass capacitor directly between the supply and ground pins, and follow the manufacturer's recommended output-capacitor network. These components should be positioned on the same PCB side as the QFN whenever possible to minimize loop area. In a duty-cycled battery design, also verify the behavior of every peripheral during transitions into and out of Stop mode. The reported 0.6 µA Stop-mode figure represents a low-power operating condition rather than total application consumption.
Use the manufacturer's numbered package drawing to assign the 24-QFN lands and connect the exposed pad to the intended thermal and ground copper. The 5 mm by 5 mm footprint leaves little room for error, so PCB libraries should use the manufacturer dimensions rather than a generic QFN-24 symbol. Keep high-current or switching-converter paths away from sensitive MCU traces and provide a continuous ground reference beneath the device where the board stack-up permits.
Confirm that the complete firmware image, bootloader, application code, and nonvolatile configuration fit within the 16 KB Flash partition before layout release. The same-package EFM32TG108F32-QFN24 offers 32 KB, but changing the ordering code alone does not update the firmware target or device configuration. Review the exact suffix, temperature grade, packing option, and startup behavior so the programmed image matches the physical device.
コンプライアンス情報
The manufacturer datasheet states that EFM32 packages are RoHS compliant and free of bromine and antimony. Other compliance attributes are not established by the available manufacturer information.