Silicon Labs

EFM32TG108F16-D-QFN24 - 32MHz Cortex-M3 MCU | Silicon Labs

Артикул: EFM32TG108F16-D-QFN24 ✓ Активен
1.98 V to 3.8 V Vdss 0.6 µA Id 24-QFN, 5 mm x 5 mm Package 32 MHz Speed 16 KB Memory
MOQ: 1 |

EFM32TG108F16-D-QFN24 Обзор

Silicon Labs EFM32TG108F16-D-QFN24 is an ARM Cortex-M3 microcontroller operating up to 32 MHz, with 16 KB of Flash memory, 4 KB of RAM, and 17 digital I/O pins in a 24-QFN package measuring 5 mm by 5 mm. It combines a low-power MCU architecture with autonomous peripherals and energy-saving modes for embedded control applications.

A microcontroller is a programmable semiconductor device that integrates a processor core, memory, digital I/O, timers, and communication peripherals into one compact component. The EFM32TG108 belongs to the Tiny Gecko family within the hierarchy of ARM Cortex microcontrollers, general-purpose embedded processors, and integrated semiconductor devices. Its compact package is intended to support space-constrained and battery-powered equipment.

Principal features include a 32-bit ARM Cortex-M3 core, 16 KB Flash, 4 KB RAM, 17 digital I/O pins, and two 16-bit timers. The device operates from a 1.98 V to 3.8 V supply. Silicon Labs reports consumption as low as 0.6 µA in Stop mode and 150 µA/MHz in Run mode, making low-power state management important for duty-cycled designs.

The Tiny Gecko platform emphasizes fast wake-up behavior, energy-saving operating modes, and autonomous peripheral operation. These characteristics allow timers and other peripherals to handle repetitive or time-critical tasks while the processor sleeps, reducing unnecessary software activity. The same 16 KB Flash configuration supports firmware storage, while the 4 KB RAM provides working memory for control routines, state handling, and short data buffers.

Typical uses include connected sensor nodes, industrial monitoring modules, compact instrumentation, low-energy IoT equipment, and embedded control boards. The 17 GPIO pins allow the MCU to connect digital sensors, switches, status indicators, and actuators, while the two 16-bit timers support periodic measurement, timing, and event-counting functions.

PCB design should preserve a clean return path around the exposed pad and place bypass capacitors close to the supply pins. Firmware should use the device's low-power modes deliberately, and every peripheral should be checked against its clock-gating behavior to ensure that current consumption matches the intended duty cycle.

This page combines the manufacturer specifications with practical power-management guidance, interface considerations, and a focused comparison of same-family devices. It is designed to help engineers evaluate the EFM32TG108F16-D-QFN24 for low-power embedded systems without overlooking package, memory, or firmware constraints.

Аналоги без доработки для EFM32TG108F16-D-QFN24 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с EFM32TG108F16-D-QFN24 (тот же форм-фактор и посадочное место) — отличается по Flash Memory, Supply Voltage Range, Digital I/O Pins, Package, Processor Core.

Silicon Labs
Flash Memory: 16 KB (16K x 8 bits)
Supply Voltage Range: 1.85 V to 3.8 V
Package: 24-QFN (5 x 5 mm)
Сравнить с EFM32TG108F16-D-QFN24 →
Silicon Labs
Flash Memory: 32 kB (32K x 8)
Digital I/O Pins: 17
Сравнить с EFM32TG108F16-D-QFN24 →

EFM32TG108F32-QFN24

✅ Прямая замена
Silicon Labs
📦 24-QFN (5x5)
ARM Cortex-M3 · 32 MHz · 32 kB (32K x 8) · 4 kB · 17 · 2 x 16-bit · 1.98 V to 3.8 V · 24-QFN (5x5 mm) Exposed Pad

Уточнить цену

Открыть даташит →

EFM32TG108F16-QFN24

✅ Прямая замена
Silicon Labs
📦 24-QFN (5x5)
ARM Cortex-M3, 32-bit · 32 MHz · Tiny Gecko · 16 KB (16K x 8 bits) · 1.85 V to 3.8 V · 2.5 V and 3.3 V · 24-QFN (5 x 5 mm)

Уточнить цену

Открыть даташит →

EFM32TG108F16-D-QFN24 Максимальные параметры и электрические характеристики

Product Type 32-bit ARM Cortex-M3 microcontroller
Manufacturer Silicon Labs
Series EFM32 Tiny Gecko
Maximum CPU Frequency 32 MHz
Flash Memory 16 KB
RAM 4 KB
Digital I/O Pins 17 pins
Timers 2 x 16-bit timers
Supply Voltage Range 1.98 V to 3.8 V
Stop Mode Current 0.6 µA
Run Mode Current 150 µA/MHz
Processor Core ARM Cortex-M3
GPIO Organization 16-bit ports identified by letters A through F
Корпус 24-QFN, 5 mm x 5 mm
Тип монтажа Surface mount
Статус RoHS Compliant
Bromine and Antimony Content Free of Br and Sb

Руководство по цоколевке EFM32TG108F16-D-QFN24 в корпусе 24-qfn, 5 mm x 5 mm

Цоколевка для EFM32TG108F16-D-QFN24 (корпус 24-qfn, 5 mm x 5 mm). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.

Схема цоколевки корпуса 24-qfn, 5 mm x 5 mm для EFM32TG108F16-D-QFN24

Нет подробных данных о распиновке для EFM32TG108F16-D-QFN24.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

EFM32TG108F16-D-QFN24 подходит для 6 применениеs: Battery-Powered Sensor Nodes, Industrial Monitoring Modules, Connected IoT Equipment, Compact Test and Measurement Products, Low-Energy Lighting Controllers, Portable Medical and Wellness Devices.

🧩

Battery-Powered Sensor Nodes

The EFM32TG108F16-D-QFN24 fits compact, duty-cycled sensor nodes because it combines a 32 MHz ARM Cortex-M3 core with Stop-mode current as low as 0.6 µA. Its 17 digital I/O pins can connect simple sensors, switches, and status indicators, while two 16-bit timers support periodic sampling and event counting. Place the MCU between the sensor interface and a 1.98 V to 3.8 V power rail, and size the input and output bypass capacitors close to the package. The principal trade-off is only 16 KB of Flash, so firmware must avoid unnecessary libraries and duplicated tables.

🏭

Industrial Monitoring Modules

The EFM32TG108F16-D-QFN24 is suitable for compact industrial monitoring modules that combine digital sensing with a low-power controller. Its 17 GPIO pins support discrete inputs, alarm outputs, and status signals, while the two 16-bit timers can implement sampling intervals or pulse-width measurements. The 32 MHz Cortex-M3 core provides enough performance for local control without a larger system-on-chip. Keep sensitive signal paths away from the MCU supply pins and maintain a low-impedance ground plane. For applications requiring larger embedded firmware, the same-package EFM32TG108F32-QFN24 provides 32 KB of Flash.

🌐

Connected IoT Equipment

The EFM32TG108F16-D-QFN24 can serve as the low-power control MCU in a compact connected device that leaves radio transmission to a separate communications component. The MCU manages sensor conditioning, local state, timers, and data framing within 16 KB of Flash and 4 KB of RAM. Its low-power platform and fast wake-up behavior support designs that remain inactive between transmissions. Firmware should disable unused peripherals and leverage Stop mode to control consumption. If the communication stack and application code together exceed 16 KB, select the 32 KB Flash EFM32TG108F32-QFN24 instead.

🖥️

Compact Test and Measurement Products

The EFM32TG108F16-D-QFN24 can control a portable measurement product when the instrument relies on digital stimulus, switching, status display, and timing functions rather than extensive analog processing. The 32 MHz ARM Cortex-M3 core supports responsive control logic, the two 16-bit timers support accurate interval and event functions, and the 17 GPIO pins connect relays, indicators, and digital interfaces. Use separate analog and digital ground partitioning where the board supports sensitive measurements. The 16 KB Flash limit makes this configuration most appropriate for focused instruments with compact firmware.

💡

Low-Energy Lighting Controllers

The EFM32TG108F16-D-QFN24 is appropriate for compact lighting controllers that schedule switching, monitor enable inputs, and coordinate multiple digital outputs. Its 17 GPIO pins provide sufficient I/O for LEDs, pushbuttons, and status functions, while the timer resources support repeatable timing sequences. The MCU's low-power operating modes are especially useful in continuously powered fixtures where standby consumption matters. Drive LED current through suitable external circuitry rather than the GPIO pins, and confirm the external transistor and resistor network independently. The same 24-QFN footprint permits evaluation with EFM32TG108F32-QFN24 if control code grows.

💊

Portable Medical and Wellness Devices

The EFM32TG108F16-D-QFN24 can serve as a low-power controller in a portable wellness device that uses digital buttons, simple sensors, and status feedback. The compact 5 mm by 5 mm QFN package preserves board area, while Stop-mode current as low as 0.6 µA supports designs that spend substantial time idle. The 17 GPIO pins and two 16-bit timers provide control and timing resources without requiring a larger MCU. Validate all measurement accuracy, safety isolation, and regulatory requirements independently, and do not treat low standby current as a substitute for medical-grade validation.

What is the EFM32TG108F16-D-QFN24?
The EFM32TG108F16-D-QFN24 is a Silicon Labs 32-bit ARM Cortex-M3 microcontroller optimized for low-power embedded applications. According to the manufacturer datasheet, it operates up to 32 MHz and provides 16 KB of Flash, 4 KB of RAM, 17 digital I/O pins, and two 16-bit timers in a 24-QFN package measuring 5 mm by 5 mm.
What are the key specifications of EFM32TG108F16-D-QFN24 that engineers should know?
The EFM32TG108F16-D-QFN24 combines a 32 MHz ARM Cortex-M3 core with 16 KB of Flash and 4 KB of RAM. According to the Silicon Labs EFM32 Tiny Gecko datasheet, the device also offers 17 digital I/O pins, two 16-bit timers, a 1.98 V to 3.8 V supply range, Stop-mode consumption down to 0.6 µA, and Run-mode consumption of 150 µA/MHz.
Where can I download the EFM32TG108F16-D-QFN24 datasheet PDF?
The EFM32TG108F16-D-QFN24 datasheet PDF can be obtained from the Silicon Labs EFM32 Tiny Gecko data sheet at silabs.com. The manufacturer document describes the 32 MHz ARM Cortex-M3 core, 16 KB Flash, 4 KB RAM, low-power modes, timers, GPIO organization, and the 24-QFN package. Use the manufacturer document for current electrical limits and final board-level constraints.
Where can I find the EFM32TG108F16-D-QFN24 pinout?
The EFM32TG108F16-D-QFN24 pinout is shown in the package-dimension and pin-description material within the Silicon Labs EFM32 Tiny Gecko datasheet. The device is supplied in a 24-QFN package, and its GPIO ports use 16-bit groups identified by letters A through F. Assign PCB tracks from the manufacturer's numbered package drawing and pin-description table rather than inferring locations from a generic QFN diagram.
Where can I buy EFM32TG108F16-D-QFN24 online?
The EFM32TG108F16-D-QFN24 can be requested through the Request a Quote form on this page. The form is the direct route for checking unit availability, quantity breaks, order confirmation, and shipment scheduling. The manufacturer product page and data sheet can be used to confirm the exact 32 MHz, 16 KB Flash, 4 KB RAM configuration before placing an order.
What is the price of EFM32TG108F16-D-QFN24?
Current commercial terms for the EFM32TG108F16-D-QFN24 are displayed through the Request a Quote form on this page. The request should identify the exact 24-QFN ordering code, desired quantity, and shipment destination. This avoids comparing a different package suffix, temperature grade, or memory configuration and establishes a quotation tied to the required EFM32TG108F16-D-QFN24.
What is the lead time for EFM32TG108F16-D-QFN24?
Request the current EFM32TG108F16-D-QFN24 lead time through the Request a Quote form on this page. Lead time can depend on order quantity, production allocation, and shipment destination, so it should be confirmed for the exact ordering code rather than inferred from general market listings. Include the requested quantity and delivery schedule so the commercial response can reflect the actual build plan.
Is EFM32TG108F16-D-QFN24 in stock?
Current stock for the EFM32TG108F16-D-QFN24 should be confirmed through the Request a Quote form on this page. Provide the required quantity, target shipment location, and whether partial quantities are acceptable. The exact ordering code identifies a 32 MHz Cortex-M3 MCU with 16 KB Flash and 4 KB RAM in a 24-QFN package, helping prevent a quote from being based on a different suffix.
What is the difference between EFM32TG108F16-D-QFN24 and EFM32TG108F32-QFN24?
The principal difference is embedded Flash capacity: EFM32TG108F16-D-QFN24 has 16 KB, while EFM32TG108F32-QFN24 has 32 KB. According to the manufacturer product information, both devices use an ARM Cortex-M3 core up to 32 MHz, provide 4 KB of RAM, expose 17 digital I/O pins, and use two 16-bit timers. The larger-memory device is preferable when firmware or nonvolatile data will not fit into 16 KB.
EFM32TG108F16-D-QFN24 vs EFM32ZG110F16-QFN24: which is better?
EFM32TG108F16-D-QFN24 is the stronger default for a compact Tiny Gecko design requiring an ARM Cortex-M3 core, 16 KB Flash, 4 KB RAM, and 17 digital I/O pins. The comparison record shows that EFM32ZG110F16-QFN24 also has 16 KB Flash and 4 KB RAM, but it belongs to a different MCU family. Choose only after verifying the alternate device's pin mapping, peripherals, clocking, and software support.
When should I choose EFM32TG108F16-D-QFN24 over EFM32TG108F32-QFN24?
Choose EFM32TG108F16-D-QFN24 when the application comfortably fits within 16 KB of Flash and benefits from a smaller memory configuration. Choose EFM32TG108F32-QFN24 when firmware, boot code, lookup tables, or nonvolatile parameters require more than 16 KB. Both operate at up to 32 MHz and provide 4 KB of RAM, so memory demand is the principal selection criterion.
Is EFM32TG108F16-D-QFN24 suitable for battery-powered IoT equipment?
Yes, EFM32TG108F16-D-QFN24 is suitable for many battery-powered IoT and monitoring products. According to the Silicon Labs data sheet, the Tiny Gecko platform can consume as little as 0.6 µA in Stop mode and 150 µA/MHz in Run mode. Its 17 GPIO pins and two 16-bit timers support compact sensor nodes, although the final battery life depends on wake frequency, radio activity, and sensor duty cycle.
What can replace EFM32TG108F16-D-QFN24?
EFM32TG108F32-QFN24 is a same-package, same-family replacement candidate when the PCB can accept a device with 32 KB instead of 16 KB of Flash. It retains a 32 MHz ARM Cortex-M3 core, 4 KB RAM, 17 GPIO pins, and two 16-bit timers. EFM32TG108F16-QFN24 is another closely related ordering configuration. Verify the exact suffix, pin mapping, firmware target, and qualification requirements before substitution.
Is EFM32TG108F16-D-QFN24 the same as EFM32TG108F16-QFN24?
EFM32TG108F16-D-QFN24 and EFM32TG108F16-QFN24 identify closely related orderable configurations in the same EFM32TG108 family. Both are associated with a 32 MHz ARM Cortex-M3 MCU, 16 KB Flash, 4 KB RAM, 17 digital I/O pins, and a 24-QFN package. The exact ordering suffix should still be checked against temperature grade, packing, and qualification requirements before treating one as a procurement substitution.
What is the best cross-brand equivalent for EFM32TG108F16-D-QFN24?
No cross-brand equivalent can be confirmed as a true drop-in replacement without comparing the complete package pinout, memory map, peripheral set, clocking, and software requirements. The EFM32TG108F16-D-QFN24 uses a 24-QFN footprint, but a matching package alone does not establish functional compatibility. Use the Request a Quote form for the exact device, and validate any cross-brand proposal against the Silicon Labs datasheet and reference design.

Справочные инженерные данные для EFM32TG108F16-D-QFN24 — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose EFM32TG108F16-D-QFN24 for compact, low-power embedded products whose complete firmware fits within 16 KB and whose design requires 17 GPIO pins, 4 KB RAM, and two 16-bit timers. Its 32 MHz ARM Cortex-M3 core and Tiny Gecko power-management architecture are well suited to sensor nodes, monitoring modules, connected accessories, and portable products. Choose EFM32TG108F32-QFN24 when the same 24-QFN footprint, CPU speed, RAM, and I/O are desired but firmware requires 32 KB of Flash. EFM32TG108F16-QFN24 is the base suffix option for procurement or configuration reviews, although the exact ordering requirements should be checked before substitution. Do not select a cross-brand device from package dimensions alone: a true replacement must also preserve the pin mapping, clock architecture, peripheral functions, memory organization, startup behavior, and software toolchain compatibility.

Сравнение с аналогами

Параметр Этот товар EFM32TG108F32-QFN24 EFM32TG108F16-QFN24
Brand Silicon Labs Silicon Labs Silicon Labs
Package 24-QFN (5x5) 24-QFN (5x5) 24-QFN (5x5)
Processor Core ARM Cortex-M3 ARM Cortex-M3 ARM Cortex-M3
Maximum CPU Frequency 32 MHz 32 MHz 32 MHz
Flash Memory 16 KB 32 KB 16 KB
RAM 4 KB 4 KB 4 KB
Digital I/O Pins 17 pins 17 pins 17 pins
Timers 2 x 16-bit timers 2 x 16-bit timers 2 x 16-bit timers
Low-Power Platform Tiny Gecko Tiny Gecko Tiny Gecko

Ключевые отличия

  • Lower Flash capacity keeps the device focused on compact embedded control (против EFM32TG108F32-QFN24)
  • Base same-family ordering option supports footprint reuse (против EFM32TG108F32-QFN24)
  • Low-power operation supports compact embedded equipment (против EFM32TG108F16-QFN24)

Заметки по проектированию

Place the input bypass capacitor directly between the supply and ground pins, and follow the manufacturer's recommended output-capacitor network. These components should be positioned on the same PCB side as the QFN whenever possible to minimize loop area. In a duty-cycled battery design, also verify the behavior of every peripheral during transitions into and out of Stop mode. The reported 0.6 µA Stop-mode figure represents a low-power operating condition rather than total application consumption.

Use the manufacturer's numbered package drawing to assign the 24-QFN lands and connect the exposed pad to the intended thermal and ground copper. The 5 mm by 5 mm footprint leaves little room for error, so PCB libraries should use the manufacturer dimensions rather than a generic QFN-24 symbol. Keep high-current or switching-converter paths away from sensitive MCU traces and provide a continuous ground reference beneath the device where the board stack-up permits.

Confirm that the complete firmware image, bootloader, application code, and nonvolatile configuration fit within the 16 KB Flash partition before layout release. The same-package EFM32TG108F32-QFN24 offers 32 KB, but changing the ordering code alone does not update the firmware target or device configuration. Review the exact suffix, temperature grade, packing option, and startup behavior so the programmed image matches the physical device.

Информация о соответствии

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

The manufacturer datasheet states that EFM32 packages are RoHS compliant and free of bromine and antimony. Other compliance attributes are not established by the available manufacturer information.

Данные проверены: 2026-11-15 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

EFM32TG108F16-D-QFN24 datasheet EFM32TG108F16-D-QFN24 pinout EFM32TG108F16-D-QFN24 specifications EFM32TG108F16-D-QFN24 equivalent EFM32TG108F16-D-QFN24 replacement EFM32TG108F16-D-QFN24 cross reference EFM32TG108F16-D-QFN24 footprint EFM32TG108F16-D-QFN24 price EFM32TG108F16-D-QFN24 stock Silicon Labs EFM32TG108F16-D-QFN24 EFM32TG108F16-D-QFN24 vs EFM32TG108F32-QFN24 EFM32TG108 24-QFN Cortex-M3 microcontroller

Связанные компоненты & термины

Silicon Labs EFM32TG108F16-D-QFN24 EFM32TG108F32-QFN24 EFM32TG108F16-QFN24 EFM32TG108 EFM32 Tiny Gecko ARM Cortex-M3 microcontroller MCU embedded processor semiconductor 24-QFN QFN package family surface-mount package Flash memory RAM general-purpose I/O GPIO 16-bit timer low-power mode Stop mode fast wake-up autonomous peripheral operation battery-powered embedded system RoHS
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ