EFM32TG108F16-D-QFN24 - 32MHz Cortex-M3 MCU | Silicon Labs
N.º de pieza: EFM32TG108F16-D-QFN24 ✓ ActivoEFM32TG108F16-D-QFN24 Descripción general
A microcontroller is a programmable semiconductor device that integrates a processor core, memory, digital I/O, timers, and communication peripherals into one compact component. The EFM32TG108 belongs to the Tiny Gecko family within the hierarchy of ARM Cortex microcontrollers, general-purpose embedded processors, and integrated semiconductor devices. Its compact package is intended to support space-constrained and battery-powered equipment.
Principal features include a 32-bit ARM Cortex-M3 core, 16 KB Flash, 4 KB RAM, 17 digital I/O pins, and two 16-bit timers. The device operates from a 1.98 V to 3.8 V supply. Silicon Labs reports consumption as low as 0.6 µA in Stop mode and 150 µA/MHz in Run mode, making low-power state management important for duty-cycled designs.
The Tiny Gecko platform emphasizes fast wake-up behavior, energy-saving operating modes, and autonomous peripheral operation. These characteristics allow timers and other peripherals to handle repetitive or time-critical tasks while the processor sleeps, reducing unnecessary software activity. The same 16 KB Flash configuration supports firmware storage, while the 4 KB RAM provides working memory for control routines, state handling, and short data buffers.
Typical uses include connected sensor nodes, industrial monitoring modules, compact instrumentation, low-energy IoT equipment, and embedded control boards. The 17 GPIO pins allow the MCU to connect digital sensors, switches, status indicators, and actuators, while the two 16-bit timers support periodic measurement, timing, and event-counting functions.
PCB design should preserve a clean return path around the exposed pad and place bypass capacitors close to the supply pins. Firmware should use the device's low-power modes deliberately, and every peripheral should be checked against its clock-gating behavior to ensure that current consumption matches the intended duty cycle.
This page combines the manufacturer specifications with practical power-management guidance, interface considerations, and a focused comparison of same-family devices. It is designed to help engineers evaluate the EFM32TG108F16-D-QFN24 for low-power embedded systems without overlooking package, memory, or firmware constraints.
Alternativas directas para EFM32TG108F16-D-QFN24 — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con EFM32TG108F16-D-QFN24 (mismo factor de forma y huella) — difiere en Flash Memory, Supply Voltage Range, Digital I/O Pins, Package, Processor Core.
EFM32TG108F32-QFN24
✅ Sustitución directaConsulte el precio
Ver hoja de datos →EFM32TG108F16-QFN24
✅ Sustitución directaConsulte el precio
Ver hoja de datos →EFM32TG108F16-D-QFN24 Valores máximos y características eléctricas
| Product Type | 32-bit ARM Cortex-M3 microcontroller |
| Manufacturer | Silicon Labs |
| Series | EFM32 Tiny Gecko |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 16 KB |
| RAM | 4 KB |
| Digital I/O Pins | 17 pins |
| Timers | 2 x 16-bit timers |
| Supply Voltage Range | 1.98 V to 3.8 V |
| Stop Mode Current | 0.6 µA |
| Run Mode Current | 150 µA/MHz |
| Processor Core | ARM Cortex-M3 |
| GPIO Organization | 16-bit ports identified by letters A through F |
| Encapsulado | 24-QFN, 5 mm x 5 mm |
| Tipo de montaje | Surface mount |
| Estado RoHS | Compliant |
| Bromine and Antimony Content | Free of Br and Sb |
Guía de configuración de pines de EFM32TG108F16-D-QFN24 24-qfn, 5 mm x 5 mm
Configuración de pines para EFM32TG108F16-D-QFN24 (encapsulado 24-qfn, 5 mm x 5 mm). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para EFM32TG108F16-D-QFN24.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
EFM32TG108F16-D-QFN24 es adecuado para 6 aplicacións: Battery-Powered Sensor Nodes, Industrial Monitoring Modules, Connected IoT Equipment, Compact Test and Measurement Products, Low-Energy Lighting Controllers, Portable Medical and Wellness Devices.
Battery-Powered Sensor Nodes
The EFM32TG108F16-D-QFN24 fits compact, duty-cycled sensor nodes because it combines a 32 MHz ARM Cortex-M3 core with Stop-mode current as low as 0.6 µA. Its 17 digital I/O pins can connect simple sensors, switches, and status indicators, while two 16-bit timers support periodic sampling and event counting. Place the MCU between the sensor interface and a 1.98 V to 3.8 V power rail, and size the input and output bypass capacitors close to the package. The principal trade-off is only 16 KB of Flash, so firmware must avoid unnecessary libraries and duplicated tables.
Recomendado
Industrial Monitoring Modules
The EFM32TG108F16-D-QFN24 is suitable for compact industrial monitoring modules that combine digital sensing with a low-power controller. Its 17 GPIO pins support discrete inputs, alarm outputs, and status signals, while the two 16-bit timers can implement sampling intervals or pulse-width measurements. The 32 MHz Cortex-M3 core provides enough performance for local control without a larger system-on-chip. Keep sensitive signal paths away from the MCU supply pins and maintain a low-impedance ground plane. For applications requiring larger embedded firmware, the same-package EFM32TG108F32-QFN24 provides 32 KB of Flash.
Recomendado
Connected IoT Equipment
The EFM32TG108F16-D-QFN24 can serve as the low-power control MCU in a compact connected device that leaves radio transmission to a separate communications component. The MCU manages sensor conditioning, local state, timers, and data framing within 16 KB of Flash and 4 KB of RAM. Its low-power platform and fast wake-up behavior support designs that remain inactive between transmissions. Firmware should disable unused peripherals and leverage Stop mode to control consumption. If the communication stack and application code together exceed 16 KB, select the 32 KB Flash EFM32TG108F32-QFN24 instead.
Recomendado
Compact Test and Measurement Products
The EFM32TG108F16-D-QFN24 can control a portable measurement product when the instrument relies on digital stimulus, switching, status display, and timing functions rather than extensive analog processing. The 32 MHz ARM Cortex-M3 core supports responsive control logic, the two 16-bit timers support accurate interval and event functions, and the 17 GPIO pins connect relays, indicators, and digital interfaces. Use separate analog and digital ground partitioning where the board supports sensitive measurements. The 16 KB Flash limit makes this configuration most appropriate for focused instruments with compact firmware.
Recomendado
Low-Energy Lighting Controllers
The EFM32TG108F16-D-QFN24 is appropriate for compact lighting controllers that schedule switching, monitor enable inputs, and coordinate multiple digital outputs. Its 17 GPIO pins provide sufficient I/O for LEDs, pushbuttons, and status functions, while the timer resources support repeatable timing sequences. The MCU's low-power operating modes are especially useful in continuously powered fixtures where standby consumption matters. Drive LED current through suitable external circuitry rather than the GPIO pins, and confirm the external transistor and resistor network independently. The same 24-QFN footprint permits evaluation with EFM32TG108F32-QFN24 if control code grows.
Recomendado
Portable Medical and Wellness Devices
The EFM32TG108F16-D-QFN24 can serve as a low-power controller in a portable wellness device that uses digital buttons, simple sensors, and status feedback. The compact 5 mm by 5 mm QFN package preserves board area, while Stop-mode current as low as 0.6 µA supports designs that spend substantial time idle. The 17 GPIO pins and two 16-bit timers provide control and timing resources without requiring a larger MCU. Validate all measurement accuracy, safety isolation, and regulatory requirements independently, and do not treat low standby current as a substitute for medical-grade validation.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para EFM32TG108F16-D-QFN24 — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | EFM32TG108F32-QFN24 | EFM32TG108F16-QFN24 |
|---|---|---|---|
| Brand | Silicon Labs | Silicon Labs | Silicon Labs |
| Package | 24-QFN (5x5) | 24-QFN (5x5) | 24-QFN (5x5) |
| Processor Core | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 |
| Maximum CPU Frequency | 32 MHz | 32 MHz | 32 MHz |
| Flash Memory | 16 KB | 32 KB | 16 KB |
| RAM | 4 KB | 4 KB | 4 KB |
| Digital I/O Pins | 17 pins | 17 pins | 17 pins |
| Timers | 2 x 16-bit timers | 2 x 16-bit timers | 2 x 16-bit timers |
| Low-Power Platform | Tiny Gecko | Tiny Gecko | Tiny Gecko |
Diferenciadores clave
- Lower Flash capacity keeps the device focused on compact embedded control (frente a EFM32TG108F32-QFN24)
- Base same-family ordering option supports footprint reuse (frente a EFM32TG108F32-QFN24)
- Low-power operation supports compact embedded equipment (frente a EFM32TG108F16-QFN24)
Notas de diseño
Place the input bypass capacitor directly between the supply and ground pins, and follow the manufacturer's recommended output-capacitor network. These components should be positioned on the same PCB side as the QFN whenever possible to minimize loop area. In a duty-cycled battery design, also verify the behavior of every peripheral during transitions into and out of Stop mode. The reported 0.6 µA Stop-mode figure represents a low-power operating condition rather than total application consumption.
Use the manufacturer's numbered package drawing to assign the 24-QFN lands and connect the exposed pad to the intended thermal and ground copper. The 5 mm by 5 mm footprint leaves little room for error, so PCB libraries should use the manufacturer dimensions rather than a generic QFN-24 symbol. Keep high-current or switching-converter paths away from sensitive MCU traces and provide a continuous ground reference beneath the device where the board stack-up permits.
Confirm that the complete firmware image, bootloader, application code, and nonvolatile configuration fit within the 16 KB Flash partition before layout release. The same-package EFM32TG108F32-QFN24 offers 32 KB, but changing the ordering code alone does not update the firmware target or device configuration. Review the exact suffix, temperature grade, packing option, and startup behavior so the programmed image matches the physical device.
Información de cumplimiento
The manufacturer datasheet states that EFM32 packages are RoHS compliant and free of bromine and antimony. Other compliance attributes are not established by the available manufacturer information.