EFM32TG108F32-QFN24T - 32MHz Tiny Gecko MCU | Silicon Labs
部品番号: EFM32TG108F32-QFN24T ✓ 生産中EFM32TG108F32-QFN24T 概要
A low-power microcontroller is a processor integrated with memory, I/O, timers, and communication peripherals for control-oriented products. The EFM32TG platform emphasizes short wake-up periods and low consumption in both active and sleep states. According to the Silicon Labs EFM32TG datasheet, the family can consume as little as 0.6 µA in Stop mode and 150 µA/MHz in Run mode, making it useful where battery life, sleep current, and rapid reactivation are important.
The EFM32TG108F32-QFN24T combines a 32 MHz Cortex-M3 core with 32 KB Flash and 4 KB RAM. Its integrated feature set includes 17 digital I/O pins and two 16-bit timers. The 24-QFN package measures 5 mm on each side, supporting compact layouts without requiring a large through-hole or high-pin-count package. The operating supply range of 1.85 V to 3.8 V accommodates common low-voltage embedded systems.
Its low-power architecture combines normal processing with energy-saving modes and relatively short wake-up times. This makes the MCU suitable for systems that spend substantial time idle but must respond promptly to sensor, communication, or user-interface events. Peripheral integration reduces external component count in designs that require timing, general-purpose I/O, and embedded control functions. The Cortex-M3 architecture also provides a 32-bit processing environment while retaining a compact software model for embedded firmware.
Typical applications include battery-powered sensor nodes, compact industrial monitors, wearable accessories, low-energy IoT endpoints, and embedded control modules. The combination of 32 KB Flash and 4 KB RAM is appropriate for firmware featuring protocol handling, state management, and modest local data processing. The 17 available digital I/O pins also support switches, indicators, sensors, and discrete control signals.
Designers should calculate both average and peak supply demand, place decoupling capacitors close to the supply and ground pins, and confirm the exposed-pad connection and thermal layout against the manufacturer package drawing. Firmware should use the device's low-energy modes deliberately, because leaving the core active can consume substantially more power than the Stop-mode figure. The 1.85 V to 3.8 V range also requires attention to sensor and radio supply compatibility.
This product page combines the manufacturer specifications with package-level guidance, verified replacement candidates, comparison criteria, and practical implementation considerations. It helps engineers narrow a Tiny Gecko selection by core architecture, memory capacity, clock rate, pin count, package, supply voltage, and low-power behavior before completing a firmware and PCB design.
ドロップイン代替品: EFM32TG108F32-QFN24T — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: EFM32TG108F32-QFN24T (同一形状・フットプリント) — 相違点: Flash Memory, Timers, Package, Digital I/O Pins, RAM.
EFM32TG108F32-D-QFN24
✅ ドロップイン価格はお問い合わせください
データシートを見る →EFM32TG108F32-QFN24
✅ ドロップイン価格はお問い合わせください
データシートを見る →EFM32TG110F16-QFN24T
✅ ドロップイン📋 参考代替品(カタログ未掲載)
EFM32HG108F32G-C-QFN24
✅ ドロップイン📋 参考代替品(カタログ未掲載)
EFM32HG110F32G-A-QFN24
✅ ドロップイン📋 参考代替品(カタログ未掲載)
EFM32ZG108F32-QFN24
✅ ドロップイン価格はお問い合わせください
データシートを見る →EFM32TG108F32-QFN24T 最大定格&電気的特性
| 仕様はありません |
EFM32TG108F32-QFN24T standard ピン配置ガイド
EFM32TG108F32-QFN24T (standard パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: EFM32TG108F32-QFN24T.
詳細は データシート をご参照ください。
主な用途
EFM32TG108F32-QFN24T の用途: 6 件s: Battery-Powered Sensor Node, Low-Energy IoT Endpoint, Wearable Accessory Controller, Compact Industrial Monitor, Low-Power Data Logger, Embedded Control Module.
Battery-Powered Sensor Node
The EFM32TG108F32-QFN24T fits battery-powered sensor nodes that must process readings while preserving standby endurance. Its 32 MHz ARM Cortex-M3 core supports local filtering and protocol handling, while 32 KB of Flash accommodates firmware, configuration, and calibration tables. The device can operate from 1.85 V to 3.8 V and may consume as little as 0.6 µA in Stop mode, allowing the controller to sleep between samples and wake for new measurements. Use low-energy scheduling, disable unused peripherals, and size the external storage only when the internal 4 KB RAM is insufficient.
おすすめ
Low-Energy IoT Endpoint
The EFM32TG108F32-QFN24T is appropriate for compact IoT endpoints that periodically communicate through an external radio and must return quickly from a low-energy state. Its ARM Cortex-M3 processor operates up to 32 MHz, providing enough performance for protocol framing and local state management without a larger application processor. The 17 digital I/O pins can support a radio enable line, sensor interrupts, status indicators, and user inputs. The family-level Run consumption of 150 µA/MHz and Stop consumption of 0.6 µA make power-mode selection central to the design, especially when radio transmission dominates the energy budget.
おすすめ
Wearable Accessory Controller
The EFM32TG108F32-QFN24T suits wearable accessories where board area, supply voltage, and standby current are tightly constrained. Its 24-QFN package measures 5 mm × 5 mm, while 17 digital I/O pins provide control and sensing connections in a compact layout. The 32 MHz Cortex-M3 core can service button events, haptic control, display updates, and wearable sensor logic. Low-power operation is especially important in accessories that spend long periods idle, making the Stop-mode figure of 0.6 µA a useful design target. Firmware should wake only for relevant interrupts and keep analog and communication blocks disabled during idle periods.
おすすめ
Compact Industrial Monitor
The EFM32TG108F32-QFN24T can serve as the control MCU in a compact industrial monitor that combines digital sensors, status indicators, and periodic data capture. Its two 16-bit timers support timing, sampling, and periodic event generation, while the 17 digital I/O pins simplify connections to discrete inputs and outputs. The 1.85 V to 3.8 V operating range allows use with common low-voltage industrial front ends, subject to sensor and isolation requirements. In installations with long idle intervals, the device's low-power modes can reduce maintenance burden, but the final design must include appropriate transient protection and verify the power budget under worst-case operating conditions.
おすすめ
Low-Power Data Logger
The EFM32TG108F32-QFN24T is well suited to a low-power data logger that stores periodic measurements and later transfers them through an external communication module. The 4 KB RAM supports short acquisition and buffering operations, while 32 KB Flash holds firmware and nonvolatile configuration. Two 16-bit timers can establish accurate sampling and transfer intervals, and the 17 digital I/O pins provide sensor selects or status signaling. Designers should use the Stop-mode capability during idle periods and account for flash write endurance when configuration or logged data is stored internally. External nonvolatile memory is appropriate when the application requires longer retention or frequent record updates.
おすすめ
Embedded Control Module
The EFM32TG108F32-QFN24T can act as the central controller in a small embedded module controlling actuators, reading inputs, and coordinating system timing. Its Cortex-M3 core runs up to 32 MHz, providing responsive task execution for control loops and communication handling. The available 17 digital I/O pins are sufficient for typical mixed-signal peripheral interfaces when external conversion or isolation is added. Its 5 mm × 5 mm 24-QFN package supports compact module construction, while the 1.85 V to 3.8 V supply range simplifies integration with low-voltage logic. Place supply and ground decoupling close to the device and follow the manufacturer exposed-pad recommendation for reliable thermal performance.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: EFM32TG108F32-QFN24T — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | EFM32TG108F32-D-QFN24 | EFM32TG108F32-QFN24 | EFM32TG110F16-QFN24T | EFM32HG108F32G-C-QFN24 | EFM32HG110F32G-A-QFN24 |
|---|---|---|---|---|---|---|
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Package | 24-QFN (5x5) | 24-QFN (5x5) - same | 24-QFN (5x5) - same | 24-QFN (5x5) - same | 24-QFN - same | 24-QFN - same |
| Processor Core | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M0+ | ARM Cortex-M0+ |
| Flash Memory | 32 KB | 32 KB | 32 KB | 16 KB | 32 KB | 32 KB |
主な差別化要因
- Higher memory capacity than the TG110 option (vs EFM32TG110F16-QFN24T)
- Manufacturer-identified revision-level drop-in path (vs EFM32TG108F32-D-QFN24)
- Cortex-M3 performance over Cortex-M0+ options (vs EFM32ZG108F32-QFN24)
設計ノート
Build the power budget from the actual active duty cycle, not only the 150 µA/MHz Run-mode figure. Calculate sleeping current from the 0.6 µA Stop-mode value, then add sensor, radio, regulator, and leakage currents. Disable unused peripherals and avoid leaving the Cortex-M3 core active between events. Confirm that the power rail remains within 1.85 V to 3.8 V during wake-up and radio activity.
Place the required input and output decoupling capacitors close to the corresponding supply and ground pins, following the capacitor values and layout sequence in the Silicon Labs EFM32TG datasheet. Provide a low-impedance ground connection and thermal-via pattern for the exposed pad. Keep high-current or switching nodes away from sensitive signal routes and follow the package drawing for the exact 24-QFN land pattern.
Do not substitute EFM32TG110F16-QFN24T without reviewing firmware size because its 16 KB Flash is half the target device's 32 KB. Likewise, moving from Cortex-M3 to a Cortex-M0+ candidate can change startup behavior, peripheral implementation, and software dependencies. Confirm the complete pinout, brownout configuration, bootloader behavior, and exposed-pad connection before approving any alternate device.
コンプライアンス情報
Target-specific compliance declarations were not identified in the cited manufacturer product description or EFM32TG family datasheet.