Silicon Labs

EFM32TG225F16-D-BGA48 - 32MHz Cortex-M3 MCU | Silicon Labs

部品番号: EFM32TG225F16-D-BGA48 ✓ 生産中
1.98 V to 3.8 V Vdss As low as 0.6 µA Id 48-BGA, 4 mm x 4 mm Package 32 MHz Speed 16 KB Memory
MOQ: 1 |

EFM32TG225F16-D-BGA48 概要

Silicon Labs EFM32TG225F16-D-BGA48 is a 32-bit Tiny Gecko microcontroller built around an ARM Cortex-M3 processor, operating at up to 32 MHz with 16 KB of Flash and 4 KB of RAM in a 48-BGA package measuring 4 mm by 4 mm. Its supply-voltage range is 1.98 V to 3.8 V, making it suitable for low-energy embedded systems operating from regulated 2 V or 3.3 V rails.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and communication interfaces on one device. The EFM32 Tiny Gecko family belongs to the hierarchy of microcontroller, embedded processor, 32-bit MCU, and energy-efficient IoT controller. Silicon Labs positions this family for battery-operated equipment and other systems where processing capability, fast wake-up behavior, and low standby consumption are important.

The EFM32TG225F16-D-BGA48 combines a 32 MHz ARM Cortex-M3 core with 16 KB of Flash and 4 KB of RAM. The EFM32TG225 family ordering information identifies BGA48 packages, a maximum operating speed of 32 MHz, and a 1.98 V to 3.8 V supply range. Its small 4 mm by 4 mm BGA package supports compact designs but requires careful PCB layout, assembly process control, and inspection.

The Tiny Gecko architecture emphasizes energy efficiency and peripheral integration. Silicon Labs states that the EFM32TG family can consume as little as 0.6 µA in Stop mode and 150 µA/MHz in Run mode. Autonomous peripherals, analog integration, and the standard ARM Cortex-M3 architecture allow firmware to perform sensing, control, and communication tasks while avoiding continuous processor activity.

Typical uses include battery-powered sensors, compact industrial monitoring equipment, connected IoT endpoints, wearable accessories, and energy-conscious embedded control modules. A sensor node can use the integrated analog and timing resources to acquire data, process it locally, and sleep between events, while an industrial module can support communications and deterministic peripheral operation within a small board footprint.

Designers should account for the fine-pitch BGA48 land pattern, maintain the power and decoupling layout required by the manufacturer datasheet, and verify programming and debug access before committing to a PCB revision. The BGA package uses Sn96.5/Ag3/Cu0.5 solderballs, and all EFM32 packages are identified as RoHS compliant and free of bromine and antimony.

This page combines exact orderable parameters, family-level alternatives, package and compliance details, application guidance, and practical design considerations to help engineers evaluate the EFM32TG225F16-D-BGA48 before schematic capture, PCB layout, and prototype assembly.

ドロップイン代替品: EFM32TG225F16-D-BGA48 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: EFM32TG225F16-D-BGA48 (同一形状・フットプリント) — 相違点: Architecture, Flash Memory, Package, Supply Voltage Range, RAM.

Silicon Labs
Architecture: 32-bit
Flash Memory: 16 KB (16K x 8 bits)
Package: 48-BGA (4 x 4 mm)
比較対象 EFM32TG225F16-D-BGA48 →
Silicon Labs
Architecture: Single-core, 32-bit
Flash Memory: 8 KB
Package: 48-BGA (4 x 4 mm)
比較対象 EFM32TG225F16-D-BGA48 →

EFM32TG225F8-BGA48

✅ ドロップイン
Silicon Labs
📦 48-BGA (4x4)
32-bit ARM Cortex-M3 microcontroller · Tiny Gecko · ARM Cortex-M3 · Single-core, 32-bit · 32 MHz · 8 KB · 2 KB · 1.85 V to 3.8 V

価格はお問い合わせください

データシートを見る →

EFM32TG225F32-BGA48

✅ ドロップイン
📦 48-BGA (4x4)
Flash is 32 KB versus 16 KB, a 100% increase; CPU remains 32 MHz and supply range remains 1.98 V to 3.8 V

📋 参考代替品(カタログ未掲載)

EFM32TG225F16-D-BGA48 最大定格&電気的特性

Product Type 32-bit ARM Cortex-M3 microcontroller
Series EFM32 Tiny Gecko
Processor Core ARM Cortex-M3
Maximum CPU Frequency 32 MHz
Flash Memory 16 KB
Flash Organization 16K x 8 bits
RAM 4 KB
Supply Voltage Range 1.98 V to 3.8 V
動作温度範囲 -40 °C to +85 °C
パッケージ 48-BGA, 4 mm x 4 mm
実装タイプ Surface mount
Low-Power Stop Current As low as 0.6 µA
Run Current 150 µA/MHz
Architecture 32-bit RISC
BGA Solder Ball Composition Sn96.5/Ag3/Cu0.5
RoHS ステータス Compliant
Bromine Content Free of bromine
Antimony Content Free of antimony

EFM32TG225F16-D-BGA48 48-bga, 4 mm x 4 mm ピン配置ガイド

EFM32TG225F16-D-BGA48 (48-bga, 4 mm x 4 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。

EFM32TG225F16-D-BGA48 の 48-bga, 4 mm x 4 mm パッケージピン配置図

詳細なピン配置データはありません: EFM32TG225F16-D-BGA48.

詳細は データシート をご参照ください。

主な用途

EFM32TG225F16-D-BGA48 の用途: 6 件s: Battery-Powered IoT Sensor Node, Industrial Condition Monitoring, Wearable Accessory Controller, Connected Energy Meter, Smart Home Endpoint, Compact Embedded Control Module.

🧩

Battery-Powered IoT Sensor Node

EFM32TG225F16-D-BGA48 fits a compact IoT sensor node that periodically measures an environmental or physical condition and transmits the result through a separate radio module. The 32 MHz ARM Cortex-M3 core provides enough performance for sensor conditioning, local filtering, and protocol preparation without occupying a larger package. With 16 KB of Flash and 4 KB of RAM, the device provides more code space than the 8 KB F8 family option while retaining the same 32 MHz performance. The EFM32TG family's ability to reach 0.6 µA in Stop mode supports long sleep intervals between measurements, reducing the energy burden on the battery. Supply the MCU from a regulated rail within 1.98 V to 3.8 V and isolate high-current radio activity from sensitive analog sections.

🏭

Industrial Condition Monitoring

The EFM32TG225F16-D-BGA48 is suitable for compact industrial condition-monitoring modules that sample vibration, temperature, or current information and perform local threshold logic. Its 32 MHz Cortex-M3 core supports deterministic peripheral coordination and communication, while 16 KB of Flash accommodates firmware, calibration data, and configuration code. The 48-BGA 4 mm by 4 mm package helps reduce board area where machinery sensors have limited installation space. Low-energy operation is particularly valuable in permanently installed monitors because the device can sleep between updates and wake for measurement cycles. The 1.98 V to 3.8 V operating range supports regulated industrial rail architectures, while the family's 150 µA/MHz Run-mode figure provides a useful baseline when sizing the power budget.

📱

Wearable Accessory Controller

EFM32TG225F16-D-BGA48 can serve as the control hub in a wearable accessory that combines motion sensing, user input, and a low-power communications link. The small 4 mm by 4 mm BGA package leaves board area available for the battery and radio, while the 32 MHz ARM Cortex-M3 core supports responsive control without requiring a higher-power application processor. Sixteen kilobytes of Flash is sufficient for compact embedded applications, and 4 KB of RAM provides working space for buffering samples and protocol state. Stop-mode current as low as 0.6 µA helps preserve battery life when the accessory is idle. Design the layout around clean power distribution, local decoupling, antenna separation, and the manufacturer's BGA48 assembly guidance.

⚡

Connected Energy Meter

EFM32TG225F16-D-BGA48 is appropriate for a compact connected energy-meter front end that measures a low-voltage signal, records usage information, and communicates through an external interface. Its 32 MHz processing capability supports sampling, filtering, and communication framing, while 16 KB of Flash and 4 KB of RAM cover a focused embedded application. The low-power architecture is useful in meters that must operate continuously from a constrained energy budget, and the 1.98 V to 3.8 V range allows use with regulated 2 V or 3.3 V internal rails. A robust implementation should isolate analog input circuitry, follow the manufacturer power and decoupling layout, and validate the complete system's metering accuracy rather than inferring it from the controller specifications.

🧩

Smart Home Endpoint

EFM32TG225F16-D-BGA48 fits a smart-home endpoint that reads a digital or analog sensor and controls a low-power actuator or communications module. Its 32 MHz ARM Cortex-M3 core provides responsive handling for debouncing, state management, and protocol tasks, while 16 KB of Flash supports a compact application without moving to a larger-memory MCU. The 48-BGA package supports dense, wearable-size electronics, and the family's low Stop-mode consumption can benefit endpoints that remain connected to mains power but spend most of their time idle. Use the 1.98 V to 3.8 V range to align with the board's regulated supply and maintain separate, adequately filtered paths for radio or switching loads to reduce disturbance to sensitive measurements.

🔧

Compact Embedded Control Module

EFM32TG225F16-D-BGA48 can serve as the central controller in a compact embedded module containing local sensing, timing, and communication interfaces. The Cortex-M3 architecture provides a familiar 32-bit processing environment, and the 16 KB Flash and 4 KB RAM divide the target well between application firmware and working memory. At 32 MHz, the MCU can service multiple peripherals without requiring a faster processor, while its low-power modes support duty-cycled operation. The 4 mm by 4 mm BGA48 footprint reduces board area but increases assembly complexity, so the PCB should preserve ball access, pad geometry, and manufacturing tolerances specified by the package drawing. Production programming, test points, and power-supply sequencing should be planned before layout is released.

Where can I buy EFM32TG225F16-D-BGA48 online?
Use the Request a Quote form on this page to request EFM32TG225F16-D-BGA48 availability, commercial terms, and order handling. The component is an exact Silicon Labs orderable number with a 48-BGA 4 mm by 4 mm package, 16 KB of Flash, 4 KB of RAM, and a maximum CPU frequency of 32 MHz. The request should include the required quantity, target delivery date, and whether reel presentation is needed for your assembly process.
What is the price of EFM32TG225F16-D-BGA48?
The current commercial price for EFM32TG225F16-D-BGA48 is handled through the Request a Quote form on this page. Pricing can depend on order quantity, production schedule, packaging presentation, and component availability. The device is specified as a 32 MHz ARM Cortex-M3 microcontroller with 16 KB of Flash, 4 KB of RAM, and a 48-BGA 4 mm by 4 mm package, so a quote can be matched to the exact manufacturer part number.
What is the lead time for EFM32TG225F16-D-BGA48?
Submit EFM32TG225F16-D-BGA48 and the required quantity through the Request a Quote form to obtain a current lead-time commitment. Lead time depends on factory scheduling, component availability, and order volume. The requested part is the exact 16 KB Flash, 4 KB RAM, 32 MHz Tiny Gecko MCU in a 48-BGA package rather than the related EFM32TG225F8-BGA48 or EFM32TG225F32-BGA48 ordering variants.
Is EFM32TG225F16-D-BGA48 in stock?
Current stock status for EFM32TG225F16-D-BGA48 should be confirmed through the Request a Quote form on this page. The form lets you state the quantity and production schedule so the exact Silicon Labs orderable code can be checked. This device has a 1.98 V to 3.8 V operating range, 32 MHz maximum CPU frequency, and a 48-BGA 4 mm by 4 mm package.
What is the difference between EFM32TG225F16-D-BGA48 and EFM32TG225F8-BGA48?
The principal difference is Flash capacity: EFM32TG225F16-D-BGA48 provides 16 KB of Flash, while EFM32TG225F8-BGA48 provides 8 KB. Both belong to the EFM32TG225 family, use a 32 MHz maximum CPU frequency, accept 1.98 V to 3.8 V, and use the 48-BGA package. The F8 option reduces code-storage capacity by 8 KB, or 50%, while retaining the same CPU speed and supply range.
Is EFM32TG225F16-D-BGA48 suitable for a compact IoT sensor node?
Yes, EFM32TG225F16-D-BGA48 is suitable for a compact, energy-conscious IoT sensor node. Its 32 MHz ARM Cortex-M3 core handles local control, while 16 KB of Flash and 4 KB of RAM support embedded firmware and data buffering. The Tiny Gecko family is optimized for low-power operation and can reach 0.6 µA in Stop mode, making periodic sensing and sleep-based operation practical.
When should I choose EFM32TG225F16-D-BGA48 over EFM32TG225F8-BGA48?
Choose EFM32TG225F16-D-BGA48 when firmware, boot code, or buffered data requires more than the 8 KB of Flash available in EFM32TG225F8-BGA48. The F16 device doubles the family option's Flash capacity to 16 KB while maintaining a 32 MHz maximum CPU frequency, 4 KB RAM, 1.98 V to 3.8 V supply range, and 48-BGA package. Choose the F8 variant only when the smaller memory footprint better matches a compact application.
What can replace EFM32TG225F16-D-BGA48?
The closest same-family drop-in candidates are EFM32TG225F8-BGA48 and EFM32TG225F32-BGA48 because each uses the 48-BGA package and 32 MHz EFM32TG225 architecture. The F8 candidate has 8 KB of Flash, 50% less than the target's 16 KB, while the F32 candidate has 32 KB, twice the target capacity. Firmware size and RAM requirements must therefore be checked before either replacement is approved.
Is EFM32TG225F16-D-BGA48 the same as EFM32TG225F16-BGA48?
EFM32TG225F16-D-BGA48 and EFM32TG225F16-BGA48 identify the same 16 KB Flash EFM32TG225 device family and 48-BGA package, with 32 MHz maximum CPU frequency and a 1.98 V to 3.8 V supply range. The ordering suffix can indicate the specific packaging or delivery presentation. Confirm the required orderable code and reel format with the manufacturer or through the Request a Quote form before treating the suffixes as interchangeable.
Where can I download the EFM32TG225F16-D-BGA48 datasheet PDF?
The manufacturer EFM32 Tiny Gecko datasheet is available from Silicon Labs at https://www.silabs.com/documents/public/data-sheets/efm32tg-datasheet.pdf. It covers the EFM32TG225 family ordering information, including the F8, F16, and F32 Flash options, 32 MHz maximum speed, 1.98 V to 3.8 V supply range, -40 °C to +85 °C temperature range, and BGA48 package. Use the pin-description and package drawings in that document when assigning PCB connections.
Where can I find the EFM32TG225F16-D-BGA48 pinout?
Use the pin-description table and BGA48 package drawing in the manufacturer EFM32 Tiny Gecko datasheet at https://www.silabs.com/documents/public/data-sheets/efm32tg-datasheet.pdf. The package is a 48-BGA measuring 4 mm by 4 mm, so its ball assignments must be transferred directly from the manufacturer diagram rather than inferred from another MCU family. Preserve the documented power, ground, decoupling, and programming connections when laying out the PCB.
What are the key specifications of EFM32TG225F16-D-BGA48 that engineers should know?
EFM32TG225F16-D-BGA48 combines a 32 MHz ARM Cortex-M3 core, 16 KB of Flash, 4 KB of RAM, a 1.98 V to 3.8 V supply range, and a 48-BGA 4 mm by 4 mm package. Silicon Labs identifies the EFM32TG family for low-power systems, with consumption as low as 0.6 µA in Stop mode and approximately 150 µA/MHz in Run mode. Its principal design constraints are code-storage capacity, fine-pitch BGA assembly, and careful power and decoupling layout.
What is the best Silicon Labs equivalent for EFM32TG225F16-D-BGA48?
The closest Silicon Labs equivalents are EFM32TG225F8-BGA48 and EFM32TG225F32-BGA48, both of which use the EFM32TG225 family, 48-BGA package, 32 MHz maximum frequency, and 1.98 V to 3.8 V supply range. Their Flash capacities are 8 KB and 32 KB respectively, compared with 16 KB for the target. No cross-brand MCU is treated as a drop-in replacement because the ARM Cortex-M3 peripheral mapping and BGA48 pin assignment must be verified before substitution.
How much power does the EFM32TG225F16-D-BGA48 consume in low-power operation?
The EFM32TG225F16-D-BGA48 can reach 0.6 µA in Stop mode according to the manufacturer EFM32 Tiny Gecko datasheet, while typical family Run-mode consumption is stated as 150 µA/MHz. These figures make periodic sensing and sleep-based operation practical in battery-powered equipment. Actual product consumption also depends on clock configuration, enabled peripherals, analog activity, and the time spent between sleep events.
Is EFM32TG225F16-D-BGA48 RoHS compliant?
Yes, the EFM32TG package family is identified as RoHS compliant and free of bromine and antimony. The manufacturer package information specifies Sn96.5/Ag3/Cu0.5 solderballs for BGA48 assemblies. Those statements address the package family and do not by themselves establish every downstream assembly or product-level compliance requirement, so a finished product still needs its own material and environmental assessment.

エンジニアリング参考データ: EFM32TG225F16-D-BGA48 — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose EFM32TG225F16-D-BGA48 for compact embedded systems that need a 32 MHz ARM Cortex-M3 controller, 16 KB of Flash, and 4 KB of RAM without moving to a larger package. Its 1.98 V to 3.8 V range and low-power Tiny Gecko architecture suit battery-operated sensors, industrial monitors, and connected endpoints. Select EFM32TG225F8-BGA48 when 8 KB of Flash and 2 KB of RAM are sufficient and board area, memory use, or cost take priority. Select EFM32TG225F32-BGA48 when 32 KB of Flash is needed, while retaining the same CPU speed, supply range, and 48-BGA format. The F16 part occupies the middle ground between these options and is often the most balanced choice for a protocol-rich but compact firmware. Because the package is a fine-pitch BGA48, confirm assembly capability, land pattern, programming access, and the exact manufacturer orderable code before committing to the PCB.

代替品との比較

パラメータ この製品 EFM32TG225F8-BGA48 EFM32TG225F32-BGA48
Package 48-BGA (4x4) 48-BGA (4x4) 48-BGA (4x4)
Brand Silicon Labs Silicon Labs Silicon Labs
Processor Core ARM Cortex-M3 ARM Cortex-M3 ARM Cortex-M3
Maximum Speed 32 MHz 32 MHz 32 MHz
Flash Memory 16 KB 8 KB 32 KB
RAM 4 KB 2 KB 4 KB
Supply Voltage 1.98 V to 3.8 V 1.98 V to 3.8 V 1.98 V to 3.8 V
Operating Temperature -40 °C to +85 °C -40 °C to +85 °C -40 °C to +85 °C
Architecture 32-bit RISC 32-bit RISC 32-bit RISC
RoHS Compliant Compliant Compliant

主な差別化要因

  • Balanced 16 KB Flash configuration (vs EFM32TG225F8-BGA48)
  • Lower memory demand than the F32 option (vs EFM32TG225F32-BGA48)
  • Low-power operation for compact embedded products (vs EFM32TG225F8-BGA48)

設計ノート

Use the manufacturer BGA48 land pattern and ball assignments without substituting a generic 48-ball footprint. The package measures 4 mm by 4 mm, so manufacturing tolerances, solder-mask definition, and pad-to-ball geometry require close PCB review. Place local decoupling at the documented supply pins, provide a continuous return path beneath the device where the layout rules allow, and include programming and test access before releasing the board for fine-pitch assembly.

Design the supply for the documented 1.98 V to 3.8 V operating range and include enough local bulk and high-frequency decoupling for the selected peripheral configuration. Separate switching or radio supplies from sensitive analog paths to prevent transient disturbance from appearing as measurement error. The family's low Stop-mode consumption can reduce average system power, but leakage through external pull networks and continuously powered sensors may dominate the final standby budget.

The principal thermal concern for this compact controller is PCB heat spreading rather than a dedicated power-semiconductor heat sink. Follow the package drawing and exposed-connection requirements for the BGA48 implementation, minimize thermal interruptions beneath the device where the recommended pattern allows, and validate junction temperature at the highest expected ambient temperature. Run-mode consumption is stated as 150 µA/MHz for the family, so actual dissipation varies with processor activity and enabled peripherals.

Do not approve an alternative based only on its 48-BGA package or Cortex-M3 core. Confirm the complete family orderable code, Flash capacity, RAM, pin assignment, supply range, and package drawing. EFM32TG225F8-BGA48 has 8 KB of Flash and 2 KB of RAM, while EFM32TG225F32-BGA48 has 32 KB of Flash and 4 KB of RAM. Always rebuild and retest the firmware after changing either memory configuration.

コンプライアンス情報

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The EFM32 package family is identified as RoHS compliant and free of bromine and antimony. BGA48 solder balls use Sn96.5/Ag3/Cu0.5. AEC-Q100, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation for the exact orderable code.

データ検証日: 2026-11-19 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

EFM32TG225F16-D-BGA48 EFM32TG225F16-D-BGA48 datasheet EFM32TG225F16-D-BGA48 datasheet pdf EFM32TG225F16-D-BGA48 pinout EFM32TG225F16-D-BGA48 footprint EFM32TG225F16-D-BGA48 schematic EFM32TG225F16-D-BGA48 equivalent EFM32TG225F16-D-BGA48 replacement EFM32TG225F16-D-BGA48 cross reference EFM32TG225F16-D-BGA48 price EFM32TG225F16-D-BGA48 stock Silicon Labs EFM32TG225F16-D-BGA48 EFM32TG225 BGA48 application circuit 32MHz Cortex-M3 16KB Flash 48-BGA

関連部品&用語

Silicon Labs EFM32TG225F16-D-BGA48 EFM32TG225F8-BGA48 EFM32TG225F32-BGA48 EFM32TG225 EFM32 Tiny Gecko ARM Cortex-M3 microcontroller embedded microcontroller 32-bit MCU energy-efficient IoT controller semiconductor BGA48 BGA package family surface-mount device 1.98 V to 3.8 V supply 16 KB Flash 4 KB RAM 32 MHz CPU Stop mode Run mode battery-powered embedded system industrial condition monitoring RoHS
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示