EFM32TG225F16-D-BGA48 - 32MHz Cortex-M3 MCU | Silicon Labs
MPN: EFM32TG225F16-D-BGA48 ✓ 啟用中EFM32TG225F16-D-BGA48 概覽
A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and communication interfaces on one device. The EFM32 Tiny Gecko family belongs to the hierarchy of microcontroller, embedded processor, 32-bit MCU, and energy-efficient IoT controller. Silicon Labs positions this family for battery-operated equipment and other systems where processing capability, fast wake-up behavior, and low standby consumption are important.
The EFM32TG225F16-D-BGA48 combines a 32 MHz ARM Cortex-M3 core with 16 KB of Flash and 4 KB of RAM. The EFM32TG225 family ordering information identifies BGA48 packages, a maximum operating speed of 32 MHz, and a 1.98 V to 3.8 V supply range. Its small 4 mm by 4 mm BGA package supports compact designs but requires careful PCB layout, assembly process control, and inspection.
The Tiny Gecko architecture emphasizes energy efficiency and peripheral integration. Silicon Labs states that the EFM32TG family can consume as little as 0.6 µA in Stop mode and 150 µA/MHz in Run mode. Autonomous peripherals, analog integration, and the standard ARM Cortex-M3 architecture allow firmware to perform sensing, control, and communication tasks while avoiding continuous processor activity.
Typical uses include battery-powered sensors, compact industrial monitoring equipment, connected IoT endpoints, wearable accessories, and energy-conscious embedded control modules. A sensor node can use the integrated analog and timing resources to acquire data, process it locally, and sleep between events, while an industrial module can support communications and deterministic peripheral operation within a small board footprint.
Designers should account for the fine-pitch BGA48 land pattern, maintain the power and decoupling layout required by the manufacturer datasheet, and verify programming and debug access before committing to a PCB revision. The BGA package uses Sn96.5/Ag3/Cu0.5 solderballs, and all EFM32 packages are identified as RoHS compliant and free of bromine and antimony.
This page combines exact orderable parameters, family-level alternatives, package and compliance details, application guidance, and practical design considerations to help engineers evaluate the EFM32TG225F16-D-BGA48 before schematic capture, PCB layout, and prototype assembly.
直接替換替代品,適用於 EFM32TG225F16-D-BGA48 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: EFM32TG225F16-D-BGA48 (相同外形與佔位) — 差異在於 Architecture, Flash Memory, Package, Supply Voltage Range, RAM.
EFM32TG225F8-BGA48
✅ 直接替換聯絡詢價
查看資料表 →EFM32TG225F32-BGA48
✅ 直接替換📋 參考替代品(不在目錄中)
EFM32TG225F16-D-BGA48 最大額定值與電氣特性
| Product Type | 32-bit ARM Cortex-M3 microcontroller |
| Series | EFM32 Tiny Gecko |
| Processor Core | ARM Cortex-M3 |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 16 KB |
| Flash Organization | 16K x 8 bits |
| RAM | 4 KB |
| Supply Voltage Range | 1.98 V to 3.8 V |
| 工作溫度範圍 | -40 °C to +85 °C |
| 封裝 | 48-BGA, 4 mm x 4 mm |
| 安裝類型 | Surface mount |
| Low-Power Stop Current | As low as 0.6 µA |
| Run Current | 150 µA/MHz |
| Architecture | 32-bit RISC |
| BGA Solder Ball Composition | Sn96.5/Ag3/Cu0.5 |
| RoHS 狀態 | Compliant |
| Bromine Content | Free of bromine |
| Antimony Content | Free of antimony |
EFM32TG225F16-D-BGA48 48-bga, 4 mm x 4 mm 腳位配置指南
EFM32TG225F16-D-BGA48(48-bga, 4 mm x 4 mm 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: EFM32TG225F16-D-BGA48.
請參閱 資料表 以查看完整腳位配置。
典型應用
EFM32TG225F16-D-BGA48 適用於 6 應用s: Battery-Powered IoT Sensor Node, Industrial Condition Monitoring, Wearable Accessory Controller, Connected Energy Meter, Smart Home Endpoint, Compact Embedded Control Module.
Battery-Powered IoT Sensor Node
EFM32TG225F16-D-BGA48 fits a compact IoT sensor node that periodically measures an environmental or physical condition and transmits the result through a separate radio module. The 32 MHz ARM Cortex-M3 core provides enough performance for sensor conditioning, local filtering, and protocol preparation without occupying a larger package. With 16 KB of Flash and 4 KB of RAM, the device provides more code space than the 8 KB F8 family option while retaining the same 32 MHz performance. The EFM32TG family's ability to reach 0.6 µA in Stop mode supports long sleep intervals between measurements, reducing the energy burden on the battery. Supply the MCU from a regulated rail within 1.98 V to 3.8 V and isolate high-current radio activity from sensitive analog sections.
推薦
Industrial Condition Monitoring
The EFM32TG225F16-D-BGA48 is suitable for compact industrial condition-monitoring modules that sample vibration, temperature, or current information and perform local threshold logic. Its 32 MHz Cortex-M3 core supports deterministic peripheral coordination and communication, while 16 KB of Flash accommodates firmware, calibration data, and configuration code. The 48-BGA 4 mm by 4 mm package helps reduce board area where machinery sensors have limited installation space. Low-energy operation is particularly valuable in permanently installed monitors because the device can sleep between updates and wake for measurement cycles. The 1.98 V to 3.8 V operating range supports regulated industrial rail architectures, while the family's 150 µA/MHz Run-mode figure provides a useful baseline when sizing the power budget.
推薦
Wearable Accessory Controller
EFM32TG225F16-D-BGA48 can serve as the control hub in a wearable accessory that combines motion sensing, user input, and a low-power communications link. The small 4 mm by 4 mm BGA package leaves board area available for the battery and radio, while the 32 MHz ARM Cortex-M3 core supports responsive control without requiring a higher-power application processor. Sixteen kilobytes of Flash is sufficient for compact embedded applications, and 4 KB of RAM provides working space for buffering samples and protocol state. Stop-mode current as low as 0.6 µA helps preserve battery life when the accessory is idle. Design the layout around clean power distribution, local decoupling, antenna separation, and the manufacturer's BGA48 assembly guidance.
推薦
Connected Energy Meter
EFM32TG225F16-D-BGA48 is appropriate for a compact connected energy-meter front end that measures a low-voltage signal, records usage information, and communicates through an external interface. Its 32 MHz processing capability supports sampling, filtering, and communication framing, while 16 KB of Flash and 4 KB of RAM cover a focused embedded application. The low-power architecture is useful in meters that must operate continuously from a constrained energy budget, and the 1.98 V to 3.8 V range allows use with regulated 2 V or 3.3 V internal rails. A robust implementation should isolate analog input circuitry, follow the manufacturer power and decoupling layout, and validate the complete system's metering accuracy rather than inferring it from the controller specifications.
推薦
Smart Home Endpoint
EFM32TG225F16-D-BGA48 fits a smart-home endpoint that reads a digital or analog sensor and controls a low-power actuator or communications module. Its 32 MHz ARM Cortex-M3 core provides responsive handling for debouncing, state management, and protocol tasks, while 16 KB of Flash supports a compact application without moving to a larger-memory MCU. The 48-BGA package supports dense, wearable-size electronics, and the family's low Stop-mode consumption can benefit endpoints that remain connected to mains power but spend most of their time idle. Use the 1.98 V to 3.8 V range to align with the board's regulated supply and maintain separate, adequately filtered paths for radio or switching loads to reduce disturbance to sensitive measurements.
推薦
Compact Embedded Control Module
EFM32TG225F16-D-BGA48 can serve as the central controller in a compact embedded module containing local sensing, timing, and communication interfaces. The Cortex-M3 architecture provides a familiar 32-bit processing environment, and the 16 KB Flash and 4 KB RAM divide the target well between application firmware and working memory. At 32 MHz, the MCU can service multiple peripherals without requiring a faster processor, while its low-power modes support duty-cycled operation. The 4 mm by 4 mm BGA48 footprint reduces board area but increases assembly complexity, so the PCB should preserve ball access, pad geometry, and manufacturing tolerances specified by the package drawing. Production programming, test points, and power-supply sequencing should be planned before layout is released.
推薦
推薦產品摘要
工程參考資料,適用於 EFM32TG225F16-D-BGA48 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | EFM32TG225F8-BGA48 | EFM32TG225F32-BGA48 |
|---|---|---|---|
| Package | 48-BGA (4x4) | 48-BGA (4x4) | 48-BGA (4x4) |
| Brand | Silicon Labs | Silicon Labs | Silicon Labs |
| Processor Core | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 |
| Maximum Speed | 32 MHz | 32 MHz | 32 MHz |
| Flash Memory | 16 KB | 8 KB | 32 KB |
| RAM | 4 KB | 2 KB | 4 KB |
| Supply Voltage | 1.98 V to 3.8 V | 1.98 V to 3.8 V | 1.98 V to 3.8 V |
| Operating Temperature | -40 °C to +85 °C | -40 °C to +85 °C | -40 °C to +85 °C |
| Architecture | 32-bit RISC | 32-bit RISC | 32-bit RISC |
| RoHS | Compliant | Compliant | Compliant |
主要差異化特點
- Balanced 16 KB Flash configuration (對比EFM32TG225F8-BGA48)
- Lower memory demand than the F32 option (對比EFM32TG225F32-BGA48)
- Low-power operation for compact embedded products (對比EFM32TG225F8-BGA48)
設計說明
Use the manufacturer BGA48 land pattern and ball assignments without substituting a generic 48-ball footprint. The package measures 4 mm by 4 mm, so manufacturing tolerances, solder-mask definition, and pad-to-ball geometry require close PCB review. Place local decoupling at the documented supply pins, provide a continuous return path beneath the device where the layout rules allow, and include programming and test access before releasing the board for fine-pitch assembly.
Design the supply for the documented 1.98 V to 3.8 V operating range and include enough local bulk and high-frequency decoupling for the selected peripheral configuration. Separate switching or radio supplies from sensitive analog paths to prevent transient disturbance from appearing as measurement error. The family's low Stop-mode consumption can reduce average system power, but leakage through external pull networks and continuously powered sensors may dominate the final standby budget.
The principal thermal concern for this compact controller is PCB heat spreading rather than a dedicated power-semiconductor heat sink. Follow the package drawing and exposed-connection requirements for the BGA48 implementation, minimize thermal interruptions beneath the device where the recommended pattern allows, and validate junction temperature at the highest expected ambient temperature. Run-mode consumption is stated as 150 µA/MHz for the family, so actual dissipation varies with processor activity and enabled peripherals.
Do not approve an alternative based only on its 48-BGA package or Cortex-M3 core. Confirm the complete family orderable code, Flash capacity, RAM, pin assignment, supply range, and package drawing. EFM32TG225F8-BGA48 has 8 KB of Flash and 2 KB of RAM, while EFM32TG225F32-BGA48 has 32 KB of Flash and 4 KB of RAM. Always rebuild and retest the firmware after changing either memory configuration.
合規資訊
The EFM32 package family is identified as RoHS compliant and free of bromine and antimony. BGA48 solder balls use Sn96.5/Ag3/Cu0.5. AEC-Q100, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation for the exact orderable code.