EFM32TG225F16-D-BGA48 - 32MHz Cortex-M3 MCU | Silicon Labs
料号: EFM32TG225F16-D-BGA48 ✓ 量产中EFM32TG225F16-D-BGA48 概述
A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and communication interfaces on one device. The EFM32 Tiny Gecko family belongs to the hierarchy of microcontroller, embedded processor, 32-bit MCU, and energy-efficient IoT controller. Silicon Labs positions this family for battery-operated equipment and other systems where processing capability, fast wake-up behavior, and low standby consumption are important.
The EFM32TG225F16-D-BGA48 combines a 32 MHz ARM Cortex-M3 core with 16 KB of Flash and 4 KB of RAM. The EFM32TG225 family ordering information identifies BGA48 packages, a maximum operating speed of 32 MHz, and a 1.98 V to 3.8 V supply range. Its small 4 mm by 4 mm BGA package supports compact designs but requires careful PCB layout, assembly process control, and inspection.
The Tiny Gecko architecture emphasizes energy efficiency and peripheral integration. Silicon Labs states that the EFM32TG family can consume as little as 0.6 µA in Stop mode and 150 µA/MHz in Run mode. Autonomous peripherals, analog integration, and the standard ARM Cortex-M3 architecture allow firmware to perform sensing, control, and communication tasks while avoiding continuous processor activity.
Typical uses include battery-powered sensors, compact industrial monitoring equipment, connected IoT endpoints, wearable accessories, and energy-conscious embedded control modules. A sensor node can use the integrated analog and timing resources to acquire data, process it locally, and sleep between events, while an industrial module can support communications and deterministic peripheral operation within a small board footprint.
Designers should account for the fine-pitch BGA48 land pattern, maintain the power and decoupling layout required by the manufacturer datasheet, and verify programming and debug access before committing to a PCB revision. The BGA package uses Sn96.5/Ag3/Cu0.5 solderballs, and all EFM32 packages are identified as RoHS compliant and free of bromine and antimony.
This page combines exact orderable parameters, family-level alternatives, package and compliance details, application guidance, and practical design considerations to help engineers evaluate the EFM32TG225F16-D-BGA48 before schematic capture, PCB layout, and prototype assembly.
直接替换替代料: EFM32TG225F16-D-BGA48 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: EFM32TG225F16-D-BGA48 (相同外形与封装尺寸) ——差异在于 Architecture, Flash Memory, Package, Supply Voltage Range, RAM.
EFM32TG225F8-BGA48
✅ 直接替换联系询价
查看数据手册 →EFM32TG225F32-BGA48
✅ 直接替换📋 参考替代料(不在目录中)
EFM32TG225F16-D-BGA48 最大额定值与电气特性
| Product Type | 32-bit ARM Cortex-M3 microcontroller |
| Series | EFM32 Tiny Gecko |
| Processor Core | ARM Cortex-M3 |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 16 KB |
| Flash Organization | 16K x 8 bits |
| RAM | 4 KB |
| Supply Voltage Range | 1.98 V to 3.8 V |
| 工作温度范围 | -40 °C to +85 °C |
| 封装 | 48-BGA, 4 mm x 4 mm |
| 安装类型 | Surface mount |
| Low-Power Stop Current | As low as 0.6 µA |
| Run Current | 150 µA/MHz |
| Architecture | 32-bit RISC |
| BGA Solder Ball Composition | Sn96.5/Ag3/Cu0.5 |
| RoHS 状态 | Compliant |
| Bromine Content | Free of bromine |
| Antimony Content | Free of antimony |
EFM32TG225F16-D-BGA48 48-bga, 4 mm x 4 mm 引脚配置指南
EFM32TG225F16-D-BGA48(48-bga, 4 mm x 4 mm 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: EFM32TG225F16-D-BGA48.
请参阅 数据手册 以查看完整引脚配置。
典型应用
EFM32TG225F16-D-BGA48 适用于 6 应用s: Battery-Powered IoT Sensor Node, Industrial Condition Monitoring, Wearable Accessory Controller, Connected Energy Meter, Smart Home Endpoint, Compact Embedded Control Module.
Battery-Powered IoT Sensor Node
EFM32TG225F16-D-BGA48 fits a compact IoT sensor node that periodically measures an environmental or physical condition and transmits the result through a separate radio module. The 32 MHz ARM Cortex-M3 core provides enough performance for sensor conditioning, local filtering, and protocol preparation without occupying a larger package. With 16 KB of Flash and 4 KB of RAM, the device provides more code space than the 8 KB F8 family option while retaining the same 32 MHz performance. The EFM32TG family's ability to reach 0.6 µA in Stop mode supports long sleep intervals between measurements, reducing the energy burden on the battery. Supply the MCU from a regulated rail within 1.98 V to 3.8 V and isolate high-current radio activity from sensitive analog sections.
推荐
Industrial Condition Monitoring
The EFM32TG225F16-D-BGA48 is suitable for compact industrial condition-monitoring modules that sample vibration, temperature, or current information and perform local threshold logic. Its 32 MHz Cortex-M3 core supports deterministic peripheral coordination and communication, while 16 KB of Flash accommodates firmware, calibration data, and configuration code. The 48-BGA 4 mm by 4 mm package helps reduce board area where machinery sensors have limited installation space. Low-energy operation is particularly valuable in permanently installed monitors because the device can sleep between updates and wake for measurement cycles. The 1.98 V to 3.8 V operating range supports regulated industrial rail architectures, while the family's 150 µA/MHz Run-mode figure provides a useful baseline when sizing the power budget.
推荐
Wearable Accessory Controller
EFM32TG225F16-D-BGA48 can serve as the control hub in a wearable accessory that combines motion sensing, user input, and a low-power communications link. The small 4 mm by 4 mm BGA package leaves board area available for the battery and radio, while the 32 MHz ARM Cortex-M3 core supports responsive control without requiring a higher-power application processor. Sixteen kilobytes of Flash is sufficient for compact embedded applications, and 4 KB of RAM provides working space for buffering samples and protocol state. Stop-mode current as low as 0.6 µA helps preserve battery life when the accessory is idle. Design the layout around clean power distribution, local decoupling, antenna separation, and the manufacturer's BGA48 assembly guidance.
推荐
Connected Energy Meter
EFM32TG225F16-D-BGA48 is appropriate for a compact connected energy-meter front end that measures a low-voltage signal, records usage information, and communicates through an external interface. Its 32 MHz processing capability supports sampling, filtering, and communication framing, while 16 KB of Flash and 4 KB of RAM cover a focused embedded application. The low-power architecture is useful in meters that must operate continuously from a constrained energy budget, and the 1.98 V to 3.8 V range allows use with regulated 2 V or 3.3 V internal rails. A robust implementation should isolate analog input circuitry, follow the manufacturer power and decoupling layout, and validate the complete system's metering accuracy rather than inferring it from the controller specifications.
推荐
Smart Home Endpoint
EFM32TG225F16-D-BGA48 fits a smart-home endpoint that reads a digital or analog sensor and controls a low-power actuator or communications module. Its 32 MHz ARM Cortex-M3 core provides responsive handling for debouncing, state management, and protocol tasks, while 16 KB of Flash supports a compact application without moving to a larger-memory MCU. The 48-BGA package supports dense, wearable-size electronics, and the family's low Stop-mode consumption can benefit endpoints that remain connected to mains power but spend most of their time idle. Use the 1.98 V to 3.8 V range to align with the board's regulated supply and maintain separate, adequately filtered paths for radio or switching loads to reduce disturbance to sensitive measurements.
推荐
Compact Embedded Control Module
EFM32TG225F16-D-BGA48 can serve as the central controller in a compact embedded module containing local sensing, timing, and communication interfaces. The Cortex-M3 architecture provides a familiar 32-bit processing environment, and the 16 KB Flash and 4 KB RAM divide the target well between application firmware and working memory. At 32 MHz, the MCU can service multiple peripherals without requiring a faster processor, while its low-power modes support duty-cycled operation. The 4 mm by 4 mm BGA48 footprint reduces board area but increases assembly complexity, so the PCB should preserve ball access, pad geometry, and manufacturing tolerances specified by the package drawing. Production programming, test points, and power-supply sequencing should be planned before layout is released.
推荐
推荐产品汇总
工程参考数据: EFM32TG225F16-D-BGA48 ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | EFM32TG225F8-BGA48 | EFM32TG225F32-BGA48 |
|---|---|---|---|
| Package | 48-BGA (4x4) | 48-BGA (4x4) | 48-BGA (4x4) |
| Brand | Silicon Labs | Silicon Labs | Silicon Labs |
| Processor Core | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 |
| Maximum Speed | 32 MHz | 32 MHz | 32 MHz |
| Flash Memory | 16 KB | 8 KB | 32 KB |
| RAM | 4 KB | 2 KB | 4 KB |
| Supply Voltage | 1.98 V to 3.8 V | 1.98 V to 3.8 V | 1.98 V to 3.8 V |
| Operating Temperature | -40 °C to +85 °C | -40 °C to +85 °C | -40 °C to +85 °C |
| Architecture | 32-bit RISC | 32-bit RISC | 32-bit RISC |
| RoHS | Compliant | Compliant | Compliant |
关键差异点
- Balanced 16 KB Flash configuration (对比 EFM32TG225F8-BGA48)
- Lower memory demand than the F32 option (对比 EFM32TG225F32-BGA48)
- Low-power operation for compact embedded products (对比 EFM32TG225F8-BGA48)
设计说明
Use the manufacturer BGA48 land pattern and ball assignments without substituting a generic 48-ball footprint. The package measures 4 mm by 4 mm, so manufacturing tolerances, solder-mask definition, and pad-to-ball geometry require close PCB review. Place local decoupling at the documented supply pins, provide a continuous return path beneath the device where the layout rules allow, and include programming and test access before releasing the board for fine-pitch assembly.
Design the supply for the documented 1.98 V to 3.8 V operating range and include enough local bulk and high-frequency decoupling for the selected peripheral configuration. Separate switching or radio supplies from sensitive analog paths to prevent transient disturbance from appearing as measurement error. The family's low Stop-mode consumption can reduce average system power, but leakage through external pull networks and continuously powered sensors may dominate the final standby budget.
The principal thermal concern for this compact controller is PCB heat spreading rather than a dedicated power-semiconductor heat sink. Follow the package drawing and exposed-connection requirements for the BGA48 implementation, minimize thermal interruptions beneath the device where the recommended pattern allows, and validate junction temperature at the highest expected ambient temperature. Run-mode consumption is stated as 150 µA/MHz for the family, so actual dissipation varies with processor activity and enabled peripherals.
Do not approve an alternative based only on its 48-BGA package or Cortex-M3 core. Confirm the complete family orderable code, Flash capacity, RAM, pin assignment, supply range, and package drawing. EFM32TG225F8-BGA48 has 8 KB of Flash and 2 KB of RAM, while EFM32TG225F32-BGA48 has 32 KB of Flash and 4 KB of RAM. Always rebuild and retest the firmware after changing either memory configuration.
合规信息
The EFM32 package family is identified as RoHS compliant and free of bromine and antimony. BGA48 solder balls use Sn96.5/Ag3/Cu0.5. AEC-Q100, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation for the exact orderable code.