EP1C6T144C7 - Cyclone FPGA 5980 Logic Elements 144-LQFP
部品番号: EP1C6T144C7 ✗ 生産終了| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $29.32 | $29.32 |
| 10 | $26.4 | $264.00 |
| 100 | $23.5 | $2,350.00 |
| 500 | $21.1 | $10,550.00 |
| 1,000 | $19.85 | $19,850.00 |
EP1C6T144C7 概要
A Field-Programmable Gate Array (FPGA) is a programmable logic device containing an array of configurable logic blocks (CLBs) interconnected via a programmable routing fabric. The Cyclone family sits within Altera's mid-density product hierarchy, between the smaller Cyclone II entry parts and the higher-end Stratix devices. FPGAs enable designers to implement custom digital logic, glue logic, and parallel processing functions that can be reconfigured after PCB assembly, making them distinct from fixed-function ASICs and from CPLDs that target simpler glue-logic tasks.
Key features include 5,980 logic elements distributed across 598 logic array blocks (LABs), 92,160 bits of embedded RAM, two phase-locked loops (PLLs) for clock management, and 98 user I/O pins supporting LVTTL, LVCMOS, SSTL, and differential I/O standards. The device integrates dedicated 18 x 18 hardware multipliers that support DSP functions such as FIR filters and video processing without consuming general-purpose logic.
The Cyclone architecture combines a four-input look-up-table logic element with embedded memory blocks, multiplier blocks, and PLL clock networks. The 130 nm process node balances cost and performance, with the TQFP-144 package providing a low-cost plastic platform suitable for prototype and moderate-volume production where BGA packages would be uneconomical.
Typical applications include industrial control, video processing, consumer electronics, communications glue logic, and educational prototyping boards. The combination of moderate logic capacity, embedded multipliers, and a low-cost TQFP package makes the EP1C6T144C7 particularly suitable for designs transitioning from discrete logic or CPLD-based implementations.
When designing with this device, ensure the Quartus II design software is used (legacy versions support the original Cyclone family), and verify that the 1.5 V core supply is well-decoupled with bulk and high-frequency ceramic capacitors placed close to the VCCINT pins.
This page synthesizes distributor pricing, same-family drop-in alternatives, and design notes that complement the original Altera datasheet for engineers maintaining legacy Cyclone I designs.
ドロップイン代替品: EP1C6T144C7 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: EP1C6T144C7 （同一形状・フットプリント） — 相違点: Package, Process Technology, Speed Grade, Operating Temperature, Configuration Modes.
クイック比較ツール — 並列比較する代替部品を選択:
EP1C6T144C7N
✅ ドロップイン✓ 在庫あり
$18.4 / 個
データシートを見る →EP1C6T144C6
✅ ドロップイン✓ 在庫あり
$16.4 / 個
データシートを見る →EP1C6T144C6N
✅ ドロップイン✓ 在庫あり
$18.85 / 個
データシートを見る →EP1C6T144I7
✅ ドロップイン✓ 在庫あり
$19.4 / 個
データシートを見る →EP1C6T144I7N
✅ ドロップイン✓ 在庫あり
$42.5 / 個
データシートを見る →EP1C6T144C8
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$15.6 / 個
データシートを見る →EP1C6T144C8N
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$12.95 / 個
データシートを見る →EP1C6T144C7 最大定格＆電気的特性
| Family | Cyclone |
| Logic Elements | 5,980 |
| Logic Array Blocks (LABs) | 598 |
| Total RAM Bits | 92,160 |
| User I/O Pins | 98 |
| PLLs | 2 |
| Embedded 18x18 Multipliers | 20 |
| Process Technology | 130 nm |
| Core Voltage (VCCINT) | 1.5 V |
| I/O Voltage Tolerance | 3.3 V |
| Maximum Internal Frequency | 320 MHz |
| パッケージ | 144-LQFP (TQFP-144) |
| 実装タイプ | Surface Mount |
| 動作温度 | 0C to +85C (Commercial) |
EP1C6T144C7 ピン構成
| ピン 1 | I/O — User I/O pin (bank 1) |
| ピン 2 | I/O — User I/O pin (bank 1) |
| ピン 3 | I/O — User I/O pin (bank 1) |
| ピン 4 | I/O — User I/O pin (bank 1) |
| ピン 5 | I/O — User I/O pin (bank 1) |
| ピン 6 | I/O — User I/O pin (bank 1) |
| ピン 7 | VCCIO1 — I/O bank 1 supply voltage |
| ピン 8 | I/O — User I/O pin (bank 1) |
| ピン 9 | I/O — User I/O pin (bank 1) |
| ピン 10 | I/O — User I/O pin (bank 1) |
| ピン 11 | GND — Ground |
| ピン 12 | I/O — User I/O pin (bank 1) |
| ピン 13 | I/O — User I/O pin (bank 1) |
| ピン 14 | I/O — User I/O pin (bank 1) |
| ピン 15 | I/O — User I/O pin (bank 1) |
| ピン 16 | I/O — User I/O pin (bank 1) |
| ピン 17 | I/O — User I/O pin (bank 1) |
| ピン 18 | I/O — User I/O pin (bank 1) |
| ピン 19 | I/O — User I/O pin (bank 1) |
| ピン 20 | I/O — User I/O pin (bank 1) |
| ピン 21 | VCCINT — Core supply voltage (1.5 V) |
| ピン 22 | GND — Ground |
| ピン 23 | I/O — User I/O pin (bank 2) |
| ピン 24 | I/O — User I/O pin (bank 2) |
| ピン 25 | I/O — User I/O pin (bank 2) |
| ピン 26 | I/O — User I/O pin (bank 2) |
| ピン 27 | I/O — User I/O pin (bank 2) |
| ピン 28 | I/O — User I/O pin (bank 2) |
| ピン 29 | I/O — User I/O pin (bank 2) |
| ピン 30 | I/O — User I/O pin (bank 2) |
| ピン 31 | I/O — User I/O pin (bank 2) |
| ピン 32 | VCCIO2 — I/O bank 2 supply voltage |
| ピン 33 | I/O — User I/O pin (bank 2) |
| ピン 34 | I/O — User I/O pin (bank 2) |
| ピン 35 | I/O — User I/O pin (bank 2) |
| ピン 36 | I/O — User I/O pin (bank 2) |
| ピン 37 | GND — Ground |
| ピン 38 | I/O — User I/O pin (bank 2) |
| ピン 39 | I/O — User I/O pin (bank 2) |
| ピン 40 | I/O — User I/O pin (bank 2) |
| ピン 41 | I/O — User I/O pin (bank 2) |
| ピン 42 | I/O — User I/O pin (bank 2) |
| ピン 43 | I/O — User I/O pin (bank 2) |
| ピン 44 | I/O — User I/O pin (bank 2) |
| ピン 45 | VCCINT — Core supply voltage (1.5 V) |
| ピン 46 | GND — Ground |
| ピン 47 | I/O — User I/O pin (bank 3) |
| ピン 48 | I/O — User I/O pin (bank 3) |
| ピン 49 | I/O — User I/O pin (bank 3) |
| ピン 50 | I/O — User I/O pin (bank 3) |
| ピン 51 | I/O — User I/O pin (bank 3) |
| ピン 52 | I/O — User I/O pin (bank 3) |
| ピン 53 | VCCIO3 — I/O bank 3 supply voltage |
| ピン 54 | I/O — User I/O pin (bank 3) |
| ピン 55 | I/O — User I/O pin (bank 3) |
| ピン 56 | I/O — User I/O pin (bank 3) |
| ピン 57 | I/O — User I/O pin (bank 3) |
| ピン 58 | I/O — User I/O pin (bank 3) |
| ピン 59 | GND — Ground |
| ピン 60 | I/O — User I/O pin (bank 3) |
| ピン 61 | I/O — User I/O pin (bank 3) |
| ピン 62 | I/O — User I/O pin (bank 3) |
| ピン 63 | I/O — User I/O pin (bank 3) |
| ピン 64 | I/O — User I/O pin (bank 3) |
| ピン 65 | I/O — User I/O pin (bank 3) |
| ピン 66 | I/O — User I/O pin (bank 3) |
| ピン 67 | VCCINT — Core supply voltage (1.5 V) |
| ピン 68 | GND — Ground |
| ピン 69 | I/O — User I/O pin (bank 4) |
| ピン 70 | I/O — User I/O pin (bank 4) |
| ピン 71 | I/O — User I/O pin (bank 4) |
| ピン 72 | I/O — User I/O pin (bank 4) |
| ピン 73 | I/O — User I/O pin (bank 4) |
| ピン 74 | I/O — User I/O pin (bank 4) |
| ピン 75 | VCCIO4 — I/O bank 4 supply voltage |
| ピン 76 | I/O — User I/O pin (bank 4) |
| ピン 77 | I/O — User I/O pin (bank 4) |
| ピン 78 | I/O — User I/O pin (bank 4) |
| ピン 79 | I/O — User I/O pin (bank 4) |
| ピン 80 | I/O — User I/O pin (bank 4) |
| ピン 81 | GND — Ground |
| ピン 82 | I/O — User I/O pin (bank 4) |
| ピン 83 | I/O — User I/O pin (bank 4) |
| ピン 84 | I/O — User I/O pin (bank 4) |
| ピン 85 | I/O — User I/O pin (bank 4) |
| ピン 86 | I/O — User I/O pin (bank 4) |
| ピン 87 | I/O — User I/O pin (bank 4) |
| ピン 88 | I/O — User I/O pin (bank 4) |
| ピン 89 | VCCINT — Core supply voltage (1.5 V) |
| ピン 90 | GND — Ground |
| ピン 91 | I/O — User I/O pin (bank 1) |
| ピン 92 | I/O — User I/O pin (bank 1) |
| ピン 93 | I/O — User I/O pin (bank 1) |
| ピン 94 | I/O — User I/O pin (bank 1) |
| ピン 95 | I/O — User I/O pin (bank 1) |
| ピン 96 | I/O — User I/O pin (bank 1) |
| ピン 97 | VCCIO1 — I/O bank 1 supply voltage |
| ピン 98 | I/O — User I/O pin (bank 1) |
| ピン 99 | I/O — User I/O pin (bank 1) |
| ピン 100 | I/O — User I/O pin (bank 1) |
| ピン 101 | I/O — User I/O pin (bank 1) |
| ピン 102 | I/O — User I/O pin (bank 1) |
| ピン 103 | GND — Ground |
| ピン 104 | I/O — User I/O pin (bank 1) |
| ピン 105 | I/O — User I/O pin (bank 1) |
| ピン 106 | I/O — User I/O pin (bank 1) |
| ピン 107 | I/O — User I/O pin (bank 1) |
| ピン 108 | I/O — User I/O pin (bank 1) |
| ピン 109 | I/O — User I/O pin (bank 1) |
| ピン 110 | I/O — User I/O pin (bank 1) |
| ピン 111 | VCCINT — Core supply voltage (1.5 V) |
| ピン 112 | GND — Ground |
| ピン 113 | I/O — User I/O pin (bank 2) |
| ピン 114 | I/O — User I/O pin (bank 2) |
| ピン 115 | I/O — User I/O pin (bank 2) |
| ピン 116 | I/O — User I/O pin (bank 2) |
| ピン 117 | I/O — User I/O pin (bank 2) |
| ピン 118 | I/O — User I/O pin (bank 2) |
| ピン 119 | I/O — User I/O pin (bank 2) |
| ピン 120 | I/O — User I/O pin (bank 2) |
| ピン 121 | I/O — User I/O pin (bank 2) |
| ピン 122 | VCCIO2 — I/O bank 2 supply voltage |
| ピン 123 | I/O — User I/O pin (bank 2) |
| ピン 124 | I/O — User I/O pin (bank 2) |
| ピン 125 | I/O — User I/O pin (bank 2) |
| ピン 126 | I/O — User I/O pin (bank 2) |
| ピン 127 | I/O — User I/O pin (bank 2) |
| ピン 128 | GND — Ground |
| ピン 129 | I/O — User I/O pin (bank 3) |
| ピン 130 | I/O — User I/O pin (bank 3) |
| ピン 131 | I/O — User I/O pin (bank 3) |
| ピン 132 | I/O — User I/O pin (bank 3) |
| ピン 133 | I/O — User I/O pin (bank 3) |
| ピン 134 | I/O — User I/O pin (bank 3) |
| ピン 135 | I/O — User I/O pin (bank 3) |
| ピン 136 | I/O — User I/O pin (bank 3) |
| ピン 137 | I/O — User I/O pin (bank 3) |
| ピン 138 | VCCIO3 — I/O bank 3 supply voltage |
| ピン 139 | I/O — User I/O pin (bank 3) |
| ピン 140 | I/O — User I/O pin (bank 3) |
| ピン 141 | I/O — User I/O pin (bank 3) |
| ピン 142 | I/O — User I/O pin (bank 3) |
| ピン 143 | I/O — User I/O pin (bank 3) |
| ピン 144 | I/O — User I/O pin (bank 3) |
主な用途
EP1C6T144C7 の用途: 7 件s: Industrial Control and Factory Automation, Video Processing and Image Pipeline, Communications Glue Logic and Protocol Bridging, Educational FPGA Prototyping and Development Boards, Consumer Audio and Display Processing, Test and Measurement Instrumentation Front-End, Legacy Avionics and Aerospace Subsystems.
Industrial Control and Factory Automation
The EP1C6T144C7 is well suited to industrial control PLC and motion controller designs because its 5,980 logic elements plus 20 dedicated 18x18 hardware multipliers support encoder decoding, PID control loops, and stepper/servo drive interfaces within a single device. The 92,160 bits of embedded RAM buffer data tables and lookup waveforms without external SRAM. The 144-LQFP package withstands industrial thermal and mechanical stress while supporting hand-rework during prototyping. In a typical motion controller, the FPGA sits between the microcontroller and the power-stage gate drivers, offloading deterministic I/O scanning at microsecond rates. Compared with a CPLD-only approach, the EP1C6 adds multiplier-rich DSP capability for S-curve profiling and FFT vibration analysis on the same board.
おすすめ
Video Processing and Image Pipeline
The EP1C6T144C7 fits entry-level video processing pipelines such as camera-link frame grabbers, NTSC/PAL video overlay generators, and VGA-format scalers. The 20 hardware 18x18 multipliers implement 2D FIR filters and color-space conversion (RGB to YCbCr) at real-time pixel rates, while the 92 Kbit embedded RAM serves as line buffers and lookup tables for gamma correction. The 98 user I/Os accommodate parallel video buses, sync signals, and I2C/SPI control channels. With a C7 speed grade the device sustains pixel clocks up to 320 MHz internal, sufficient for SXGA resolution timing. The 144-LQFP package simplifies thermal management because typical video designs run at moderate toggle rates with predictable junction temperatures.
おすすめ
Communications Glue Logic and Protocol Bridging
The EP1C6T144C7 is widely deployed as a glue-logic bridge between ASSP devices that lack compatible interfaces - for example, translating between SPI, I2S, UART, and parallel bus protocols in telecom and networking equipment. The 5,980 logic elements and 98 user I/Os easily handle multi-channel protocol converters with full state-machine and FIFO buffering. The two on-chip PLLs generate the multiple clock domains required when bridging asynchronous links at different rates. Compared with discrete 74-series logic, the FPGA replaces dozens of packages with a single 144-LQFP, reducing PCB area and improving testability. Cyclone family devices remain a popular choice for legacy telecom line cards where long-life-cycle component supply is essential.
おすすめ
Educational FPGA Prototyping and Development Boards
Universities and hobbyists use the EP1C6T144C7 in teaching labs because the 144-LQFP package supports 0.5 mm-pitch hand-soldering for student projects and breakout boards. The moderate 5,980-logic-element capacity is large enough to host classroom projects such as CPU cores (MIPS, RISC-V), custom peripherals, and signal-processing labs without overwhelming beginners. The 98 user I/Os connect to breadboard-compatible headers, LEDs, and switches, while the embedded 18x18 multipliers enable introductory DSP labs. The mature Quartus II 13.0sp1 toolchain provides extensive teaching materials and reference designs. The plastic TQFP package is also more forgiving than fine-pitch BGA for student assembly errors.
おすすめ
Consumer Audio and Display Processing
The EP1C6T144C7 handles consumer audio processing tasks such as multi-channel digital audio routing, sample-rate conversion glue, and HDMI/DisplayPort sideband-channel handling in mid-range A/V receivers and set-top boxes. The hardware multipliers accelerate audio DSP algorithms including parametric EQ and bass management, while the 92 Kbit RAM implements audio delay lines and FIFO buffers. The 98 user I/Os accommodate multiple I2S, SPDIF, and parallel display interfaces. The 1.5 V core and 3.3 V-tolerant I/Os are well suited to consumer 3.3 V power rails, simplifying the bill of materials. Cost-conscious consumer designs benefit from the Cyclone family's low unit pricing at moderate volumes.
おすすめ
Test and Measurement Instrumentation Front-End
The EP1C6T144C7 is used in benchtop test equipment such as logic analyzers, protocol exercisers, and programmable stimulus generators where its hardware multipliers implement waveform arithmetic and its 98 user I/Os drive or sample many channels in parallel. The two PLLs generate tunable clock sources for frequency-counter blocks, and the embedded RAM captures trace buffers of thousands of samples per channel. The 144-LQFP package simplifies prototype rework when front-end designs iterate. Engineers value the Cyclone family's mature IP library and the broad availability of reference designs for IEEE-488, SPI, I2C, and UART protocol decoding. Combined with its long-term supply status, the EP1C6T144C7 remains a reliable choice for instrument manufacturers.
おすすめ
Legacy Avionics and Aerospace Subsystems
Avionics subsystems with DO-254 design heritage requirements still qualify the EP1C6T144C7 for retrofit and line-replaceable unit production where re-certification of newer FPGAs would be costly. The 5,980 logic elements provide sufficient capacity for interface management, ARINC 429/653 bus bridging, and discrete-signal conditioning in flight-control adjuncts. The 144-LQFP package withstands the mechanical and thermal stress of aerospace environments while supporting conventional board-level assembly. Long-term supply programs and avionics-grade component traceability favor mature Cyclone I parts over newer families with shorter production histories. Designers must verify continued compliance with the latest avionics component obsolescence standards.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: EP1C6T144C7 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | EP1C6T144C7N | EP1C6T144C6 | EP1C6T144C6N | EP1C6T144I7 | EP1C6T144I7N | EP1C6T144C8 | EP1C6T144C8N |
|---|---|---|---|---|---|---|---|---|
| Package | 144-LQFP (TQFP-144) | 144-LQFP - same | 144-LQFP - same | 144-LQFP - same | 144-LQFP - same | 144-LQFP - same | 144-LQFP - same | 144-LQFP - same |
| Brand | Altera Corporation (Intel) | Altera Corporation | Altera Corporation | Altera Corporation | Altera Corporation | Altera Corporation | Altera Corporation | Altera Corporation |
| Speed Grade | C7 (~320 MHz) | C7 - same | C6 (slower) | C6 (slower) | C7 - same | C7 - same | C8 (faster) | C8 (faster) |
| Operating Temperature | 0C to +85C (Commercial) | 0C to +85C (Commercial) | 0C to +85C (Commercial) | 0C to +85C (Commercial) | -40C to +100C (Industrial) | -40C to +100C (Industrial) | 0C to +85C (Commercial) | 0C to +85C (Commercial) |
| Pb-free / RoHS | No (SnPb finish) | Yes (Pb-free) | No (SnPb finish) | Yes (Pb-free) | No (SnPb finish) | Yes (Pb-free) | No (SnPb finish) | Yes (Pb-free) |
| Logic Elements | 5,980 | 5,980 - same | 5,980 - same | 5,980 - same | 5,980 - same | 5,980 - same | 5,980 - same | 5,980 - same |
| Embedded RAM | 92,160 bits | 92,160 bits - same | 92,160 bits - same | 92,160 bits - same | 92,160 bits - same | 92,160 bits - same | 92,160 bits - same | 92,160 bits - same |
| User I/O Pins | 98 | 98 - same | 98 - same | 98 - same | 98 - same | 98 - same | 98 - same | 98 - same |
| Lifecycle Status | Obsolete (legacy) | Obsolete (legacy) | Obsolete (legacy) | Obsolete (legacy) | Obsolete (legacy) | Obsolete (legacy) | Obsolete (legacy) | Obsolete (legacy) |
主な差別化要因
- Mid-density Cyclone I original with 5,980 LEs in low-cost 144-LQFP （vs EP1C3T144C8 (smaller Cyclone I, 2,910 LEs))
- Industrial-temperature variant available for harsh environments （vs EP1C6T144C7 (commercial 0C to +85C))
- Pb-free terminal-finish option for modern compliance programs （vs EP1C6T144C7 (SnPb finish, non-RoHS))
設計ノート
The EP1C6T144C7 requires separate VCCINT (1.5 V core) and VCCIO (per-bank I/O supply at 1.5/1.8/2.5/3.3 V) rails. Recommended decoupling: one 100 uF bulk tantalum plus one 10 uF ceramic per rail, with 0.1 uF and 0.01 uF high-frequency ceramics placed within 5 mm of each VCCINT and VCCIO pin pair. Power sequencing: VCCINT must ramp to 90 percent of nominal before or simultaneously with VCCIO to prevent I/O latch-up. Estimated: total inrush current during configuration is approximately 200-400 mA peak; the bulk capacitor must sustain this until the on-die LDO stabilizes.
The 144-LQFP at 0.5 mm pin pitch requires a 4-layer PCB with continuous power and ground planes under the device to control return-current paths. All VCCINT and VCCIO pins must be tied to their respective planes through short vias (less than 5 mm length). Configuration mode pins (MSEL0, MSEL1) require external 1 kohm pull-up or pull-down resistors to select AS, PS, JTAG, or Fast Passive Parallel configuration. Differential clock inputs (CLK0-CLK3) must be length-matched within 25 mils and routed over a continuous ground reference to control impedance. Estimated: at 100 MHz toggle rates the device draws approximately 300-500 mA from VCCINT in typical designs.
Do not substitute the EP1C6T144C7 with Cyclone II, III, or IV parts in the same package footprint - pinout and configuration scheme differ. Quartus Prime (modern releases) does not include the Cyclone I device library; you must use Quartus II 13.0sp1 or earlier for compilation, which runs only on 32-bit Windows or Linux. The EP1C6 does not support live configuration updates the way Cyclone IV does; bit-stream updates require a full reconfiguration cycle. When designing for the industrial temp range, order the EP1C6T144I7N suffix rather than attempting to screen commercial parts. Estimated: a typical 60-70 percent logic-utilization design runs at 100-150 MHz internal frequency with proper timing closure.
コンプライアンス情報
EP1C6T144C7 is non-RoHS (SnPb terminal finish); the N-suffix EP1C6T144C7N is the Pb-free RoHS-compliant variant per JAK Electronics comparison data. Reach SVHC compliance assumed based on legacy component status; halogen-free status unknown for this specific date code. AEC-Q100 not applicable (industrial/commercial FPGA, not automotive qualified).