EP1M120F15FC484 - Mercury FPGA, 120K Gates, FCBGA-484 | Intel / Altera
部品番号: EP1M120F15FC484 ✗ 生産終了| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $145 | $145.00 |
| 10 | $132.5 | $1,325.00 |
| 100 | $118 | $11,800.00 |
| 500 | $105 | $52,500.00 |
| 1,000 | $92 | $92,000.00 |
EP1M120F15FC484 概要
An FPGA (Field-Programmable Gate Array) is a type of programmable logic device that combines the integration density of an ASIC with the design flexibility of a mask-programmed gate array. FPGAs belong to the broader hierarchy of programmable logic -> logic IC -> integrated circuit -> semiconductor. The Mercury family occupies a tier between the ACEX 1K and the APEX series, integrating Look-Up Table (LUT)-based logic elements, Embedded System Blocks (ESBs) for memory, and high-speed I/O standards including LVDS, SSTL, and GTL+.
Key features of the EP1M120F15FC484 include 4,800 logic elements (LEs), 49,152 RAM bits distributed across embedded memory blocks, and 303 user I/O pins. The "F15" speed grade corresponds to a -1.5 device in Altera's nomenclature, and the FCBGA-484 package offers a 1.0 mm ball pitch suitable for high-density surface-mount assembly.
The Mercury architecture pairs four-input LUTs with dedicated carry chains for fast arithmetic and a MultiTrack interconnect for predictable timing closure. A built-in PLL supports clock multiplication and phase shifting, while per-pin delay chains simplify source-synchronous interface tuning for DDR-style memories and LVDS links.
Typical applications include high-speed serial backplanes, telecom line cards, networking switches, DSP co-processing engines, and prototyping platforms that demand high I/O count with deterministic timing.
When designing with this device, plan for a 1.5 V core supply (VCCINT) and a 3.3 V I/O supply (VCCIO), and use Altera Quartus II for synthesis, place-and-route, and bitstream generation. Always provision configuration memory through EPC4/EPC8/EPC16 enhanced configuration devices or a download cable.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, making it useful for engineers validating BOM risk and for procurement teams evaluating Mercury family substitutes.
ドロップイン代替品: EP1M120F15FC484 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: EP1M120F15FC484 （同一形状・フットプリント） — 相違点: Package, Family, Operating Temperature, Speed Grade, Logic Elements.
クイック比較ツール — 並列比較する代替部品を選択:
EP1M120F484C6
✅ ドロップイン✓ 在庫あり
$198 / 個
データシートを見る →EP1M120F484I6
✅ ドロップイン✓ 在庫あり
$95 / 個
データシートを見る →EP1M120B484C7A
✅ ドロップイン✓ 在庫あり
$52 / 個
データシートを見る →EP1M120B484I6
✅ ドロップイン✓ 在庫あり
$213.75 / 個
データシートを見る →EP1M120B484C8A
✅ ドロップイン✓ 在庫あり
$62 / 個
データシートを見る →EP1M120F15FC484 最大定格＆電気的特性
| Family | Mercury |
| Logic Elements | 4,800 |
| Typical Gates | 120,000 |
| Maximum User I/O Pins | 303 |
| Total RAM Bits | 49,152 |
| Embedded Memory Blocks | Embedded System Blocks (ESBs) |
| Speed Grade | F15 (-1.5) |
| パッケージ | 484-ball FineLine BGA (FCBGA) |
| Ball Pitch | 1.0 mm |
| Process Technology | 0.18 um SRAM |
| Core Voltage (VCCINT) | 1.5 V |
| I/O Voltage (VCCIO) | 3.3 V |
| Configuration | SRAM, supports EPC4/EPC8/EPC16 |
| 実装タイプ | Surface Mount (BGA) |
EP1M120F15FC484 484-ball fineline bga (fcbga) ピン配置ガイド
EP1M120F15FC484 (484-ball fineline bga (fcbga) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: EP1M120F15FC484.
詳細は データシート をご参照ください。
主な用途
EP1M120F15FC484 の用途: 6 件s: Telecom Backplane Interface, DSP Co-Processing Engine, Networking Switch Glue Logic, DDR Memory Controller Front-End, Industrial Control Logic, ASIC Prototyping Platform.
Telecom Backplane Interface
The EP1M120F15FC484 fits telecom backplane interface cards because it combines 303 user I/O pins with LVDS and SSTL I/O support, enabling multi-channel source-synchronous links between line cards and a switch fabric. Its 4,800 LEs deliver enough logic for 8b/10b encoding, CRC generation, and per-channel framing without external glue logic. The 1.5 V core keeps dynamic power manageable on a 3.3 V backplane, while the dedicated PLL multiplies a 77.76 MHz reference to the 311 MHz rates used in standard telecom fabrics. Drop-in compatibility with the -6 speed grade (EP1M120F484C6) lets designers reserve the right to upgrade Fmax without PCB rework.
おすすめ
DSP Co-Processing Engine
The EP1M120F15FC484 suits DSP co-processing because its 49,152 bits of embedded RAM (ESBs) provide single-cycle access for FIR filter coefficients and data samples. The 4,800 LEs deliver roughly 4 GMACs of throughput when implementing 16-bit MAC pipelines, and the carry chains support fast adders and accumulators. The 1.5 V core keeps power within a 2 W envelope, suitable for plug-in DSP modules on host cards. Designers can pipeline an entire FFT butterfly or correlate-and-sum operation into one device, offloading the host processor.
おすすめ
Networking Switch Glue Logic
The EP1M120F15FC484 fits networking switch glue logic because its 303 I/O pins accept LVTTL, LVCMOS, GTL+, and SSTL standards used by PHY and switch ASICs of the era. The Mercury MultiTrack interconnect gives predictable timing on fanout-heavy glue paths such as LED drivers, port-status aggregation, and I2C/SPI management bus muxes. With 4,800 LEs the device comfortably absorbs a full 24-port managed Ethernet switch's logic tail. The 1.5 V core / 3.3 V I/O split simplifies power sequencing with adjacent switch ASICs.
おすすめ
DDR Memory Controller Front-End
The EP1M120F15FC484 fits DDR memory controller front-ends because its per-pin delay chains and SSTL-2 I/O support compensate for DDR timing skew at up to 167 MHz. The ESB-based FIFO buffers isolate read/write domains, and 4,800 LEs absorb the command scheduler, refresh logic, and parity generation. The 1.5 V core interfaces cleanly to 2.5 V SSTL I/O through VCCIO bank programming. Designers can prototype a DDR controller before committing to ASIC flow.
おすすめ
Industrial Control Logic
The EP1M120F15FC484 fits industrial control because the Mercury die integrates 4,800 LEs with 49,152 RAM bits for state-machine and lookup-table based control logic. The 303 I/O pins support 24 mA drive strength for opto-isolated inputs and relay drivers, and the dedicated PLL cleans noisy industrial clock sources. Its 0.18-um process tolerates extended thermal stress when paired with the industrial-temperature EP1M120F484I6 drop-in. Engineers typically implement PID loops, motion-control state machines, and protocol bridges (Modbus, CAN) on this device.
おすすめ
ASIC Prototyping Platform
The EP1M120F15FC484 fits ASIC prototyping because the 4,800 LEs are large enough to map representative RTL blocks and the 49,152 RAM bits model embedded SRAM accurately. Designers can validate IO ring behaviour with LVDS, SSTL, and GTL+ standards before committing to a 0.18-um ASIC shuttle. The SRAM-based configuration allows infinite design iterations, and JTAG-based downloads accelerate regression cycles. The Mercury family shares the Quartus II flow with Cyclone, easing migration once the prototype is verified.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: EP1M120F15FC484 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | EP1M120F484C6 | EP1M120F484I6 | EP1M120B484C7A |
|---|---|---|---|---|
| Brand | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) |
| Package | 484-ball FCBGA | 484-ball FCBGA (same) | 484-ball FCBGA (same) | 484-ball FCBGA (same) |
| Speed Grade | F15 (-1.5) | -6 (faster) | -6 (faster) | -7 (slower) |
| Logic Elements | 4,800 | 4,800 (same die) | 4,800 (same die) | 4,800 (same die) |
| Total RAM Bits | 49,152 | 49,152 | 49,152 | 49,152 |
| Maximum User I/O | 303 | 303 | 303 | 303 |
| Core Voltage (VCCINT) | 1.5 V | 1.5 V | 1.5 V | 1.5 V |
| Lifecycle Status | Obsolete | Obsolete | Obsolete | Obsolete |
| Typical Unit Price (2026-09-07) | USD 145 | USD 165 (faster grade premium) | USD 195 (industrial premium) | USD 110 (slower grade discount) |
主な差別化要因
- Slowest speed grade in Mercury family （vs EP1M120F484C6)
- Commercial temperature grade （vs EP1M120F484I6)
- FCBGA-484 high-density package （vs EP1M120B484C7A)
設計ノート
Estimated: The EP1M120F15FC484 has a 1.5 V core (VCCINT) and 3.3 V I/O (VCCIO). With all 303 I/O at 24 mA and a 50% toggle rate, I/O power can exceed 1.2 W; the core adds another 0.5-1.5 W depending on utilization. Provide at least four 100 uF bulk capacitors and sixteen 0.1 uF decoupling capacitors around the FCBGA-484 footprint to keep the VCCINT ripple under 50 mVpp.
Estimated: For a 1.5 W core and 1.2 W I/O load on the FCBGA-484 package (theta_JA ~12 C/W on a 4-layer JEDEC test board), junction temperature rises about 32 C above ambient. In a sealed enclosure at 55 C ambient, junction temperature stays below the 125 C commercial limit, but designers should still specify a thermal pad under the BGA and thermal vias to the inner ground plane.
Use a 1.0 mm pitch FCBGA land pattern with non-solder-mask-defined (NSMD) pads to improve solder joint reliability. Place 0.1 uF decoupling capacitors on the inner layer directly beneath the BGA, and route all VCCINT/VCCIO power planes as split planes with stitching vias every 5 mm. Maintain 50 ohm controlled impedance for LVDS pairs and length-match within 150 mil across an 8-bit bus.
Do not confuse the F15 speed grade with a -6 grade: F15 corresponds to -1.5 (slowest tier) and runs significantly slower than -6. Do not assume EPC16 configuration works without 3.3 V VCCIO on dedicated configuration pins. Do not omit the JTAG TCK pull-down resistor when designing boundary-scan fixtures.
コンプライアンス情報
Operating temperature grade not specified in provided data. RoHS and REACH status unknown - the Altera Mercury family predates Intel's RoHS compliance disclosures.
