EP2AGX45DF29C5N - Arria II GX FPGA, 42K LE, 364 I/O | Intel
部品番号: EP2AGX45DF29C5N ✗ 生産終了| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $720 | $720.00 |
| 10 | $685 | $6,850.00 |
| 100 | $620 | $62,000.00 |
| 500 | $560 | $280,000.00 |
| 1,000 | $510 | $510,000.00 |
EP2AGX45DF29C5N 概要
A Field-Programmable Gate Array (FPGA) is a reconfigurable integrated circuit whose logic fabric, interconnect, and I/O can be programmed by the end user after manufacture, sitting within the broader hierarchy of programmable logic devices (PLD) -> logic ICs -> integrated circuits (IC) -> semiconductors. The Arria II GX family specifically targets transceiver-rich mid-density applications where designers need hard-wired multi-gigabit serial channels alongside general-purpose FPGA fabric, balancing cost against performance for production volumes.
Key specifications include 18050 Adaptive Logic Modules (ALMs), up to 156 18x18 multipliers for DSP, embedded transceiver blocks supporting protocols such as PCIe Gen2, XAUI, Serial RapidIO, and Gbps Ethernet, and a -5C speed grade that places the device in the standard commercial performance bin. The 780-pin FC-BGA package uses 1 mm ball pitch and includes an exposed die for thermal dissipation, supporting industrial thermal envelopes with proper PCB layout.
Typical applications for the EP2AGX45DF29C5N include wireless baseband processing, software-defined radio front-ends, high-speed serial backplane aggregation, video encoding/decoding pipelines, and bridge chips for legacy bus standards. The combination of transceivers and rich logic makes it a frequent choice for prototyping 40 Gbps-class systems before committing to ASIC NRE.
Designers using this part should plan PCB layout for the 780-ball BGA early in the schematic phase, ensure decoupling capacitors cover all power rails (VCC, VCCPT, VCCA, VCCP), and use Altera/Intel Quartus II software with the Arria II GX device support installed. For designs that do not need the integrated transceivers, the smaller Arria II GZ (EP2AGZ45) variants may be considered.
This page synthesizes distributor pricing, drop-in Altera/Intel speed-grade and temperature alternatives, and practical design notes that are not found in the manufacturer datasheet alone. Engineers should cross-check the device handbook chapter for transceiver channel count and PLL availability before locking the bill of materials.
ドロップイン代替品: EP2AGX45DF29C5N — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: EP2AGX45DF29C5N （同一形状・フットプリント） — 相違点: Package, Speed Grade, Operating Temperature, Process Technology, Mounting Type.
クイック比較ツール — 並列比較する代替部品を選択:
EP2AGX45DF29C5G
✅ ドロップイン✓ 在庫あり
$335 / 個
データシートを見る →EP2AGX45DF29C4N
✅ ドロップイン✓ 在庫あり
$335.45 / 個
データシートを見る →EP2AGX45DF29C3N
✅ ドロップイン✓ 在庫あり
$178 / 個
データシートを見る →EP2AGX45DF29C6N
✅ ドロップイン✓ 在庫あり
$175 / 個
データシートを見る →EP2AGX45DF29I5N
✅ ドロップイン✓ 在庫あり
$318 / 個
データシートを見る →EP2AGX45DF29C5N 最大定格＆電気的特性
| Family | Arria II GX |
| Series | EP2AGX45 |
| Device Type | FPGA - Field Programmable Gate Array |
| Number of Logic Elements (LE) | 42959 |
| Number of LABs / CLBs | 1805 |
| Adaptive Logic Modules (ALM) | 18050 |
| Total RAM Bits | 3517440 |
| Number of User I/Os | 364 |
| パッケージ / ケース | 780-BBGA, FCBGA |
| Package Code | HBGA |
| Package Dimensions | 29 x 29 mm |
| Core Supply Voltage | 0.9 V |
| Process Technology | 40 nm CMOS |
| Speed Grade | -5 (C5) |
| 実装タイプ | Surface Mount |
| RoHS ステータス | Compliant |
| Lead Free | Yes |
EP2AGX45DF29C5N 29 x 29 mm ピン配置ガイド
EP2AGX45DF29C5N (29 x 29 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: EP2AGX45DF29C5N.
詳細は データシート をご参照ください。
主な用途
EP2AGX45DF29C5N の用途: 6 件s: PCIe Gen2 Endpoint / Bridge Card, Wireless Baseband & Software Defined Radio, Broadcast Video Processing Pipeline, High-Speed Serial Backplane Aggregation, ASIC Prototyping & Emulation, Industrial Motor Control & Automation.
PCIe Gen2 Endpoint / Bridge Card
The EP2AGX45DF29C5N's integrated hardened PCIe Gen2 hard IP blocks (up to x4 lanes at 5 Gbps) make it an excellent PCIe endpoint or bridge silicon. With 42,959 logic elements and 3,517,440 bits of embedded RAM, designers have ample fabric to implement custom DMA engines, scatter-gather logic, and protocol translation between PCIe and local buses. The -5 speed grade typically closes timing at 250 MHz fabric and 5 Gbps transceivers for moderate-complexity endpoints. The 364 user I/Os of the FC-FBGA-780 package provide abundant LVDS/LVTTL for memory interfaces (DDR2/DDR3) and side-band signals.
おすすめ
Wireless Baseband & Software Defined Radio
For SDR and wireless baseband processing, the EP2AGX45DF29C5N pairs dedicated 3.125 Gbps transceivers with 18x18 multipliers (up to 156 DSP blocks) and 3.5 Mbit embedded RAM. LTE PHY layer, digital up/down conversion, and channelization filters map efficiently onto the ALM fabric. The 0.9 V core supply keeps power reasonable for radio head designs where multiple FPGAs share a backplane. The FC-FBGA-780 footprint also exposes sufficient I/O for parallel ADC/DAC interfaces such as LVDS at hundreds of Msps, which is critical for direct-RF sampling front-ends.
おすすめ
Broadcast Video Processing Pipeline
Broadcast-grade video processing demands real-time pixel throughput, which the EP2AGX45DF29C5N supports via up to 364 I/Os and dedicated serializer/deserializer resources. Designers use the 3.5 Mbit embedded RAM as line buffers and motion-estimation scratchpad, while DSP blocks accelerate 2D filters, scaling engines, and deinterlacers. The -5 speed grade is sufficient for 3G-SDI and HDMI 1.4 video bridges operating at 148.5 MHz pixel clocks. The 29x29 mm FC-FBGA package fits mid-size video processing boards where multiple FPGAs handle ingest and playout channels in parallel.
おすすめ
High-Speed Serial Backplane Aggregation
Backplane aggregation cards benefit from the EP2AGX45DF29C5N's multiple 3.125 Gbps transceiver channels, which can be bonded for protocols such as XAUI (4x3.125 Gbps = 10 Gbps aggregate) or Serial RapidIO. The 42K LE fabric provides protocol processing, packet buffering (leveraging 3.5 Mbit embedded RAM), and switch-fabric glue logic between aggregated links. Industrial temperature variants (EP2AGX45DF29I5N) extend deployment to outdoor telecom cabinets. The FC-FBGA-780 footprint exposes enough I/O for management Ethernet, status LEDs, and rear-panel transceiver connections.
おすすめ
ASIC Prototyping & Emulation
The EP2AGX45DF29C5N's 42,959 logic elements, 3.5 Mbit embedded memory, and 364 user I/Os make it a strong candidate for ASIC prototyping platforms that need to map mid-complexity ASIC RTL to FPGA fabric. Designers can partition large ASIC designs across multiple Arria II GX FPGAs using the abundant transceiver bandwidth for chip-to-chip emulation links. The -5 speed grade provides sufficient Fmax for most ASIC target frequencies below 200 MHz. The FC-FBGA-780 footprint also enables prototyping boards with high I/O density for connecting to ASIC test fixtures.
おすすめ
Industrial Motor Control & Automation
Industrial motor drives and factory automation controllers leverage the EP2AGX45DF29C5N's high I/O count (364 pins) to interface with multiple encoder channels, resolver feedback, and isolated GPIO. The DSP blocks accelerate field-oriented control (FOC) math, while the embedded RAM serves as lookup tables for sinusoidal modulation and S-curve profiles. Industrial temperature variants (EP2AGX45DF29I5N) operate across -40C to +100C, suiting factory floor environments. The 0.9 V core combined with hardened PCIe enables integration into EtherCAT or PROFINET master controllers.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: EP2AGX45DF29C5N — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | EP2AGX45DF29C5G | EP2AGX45DF29C4N | EP2AGX45DF29C3N | EP2AGX45DF29C6N | EP2AGX45DF29I5N |
|---|---|---|---|---|---|---|
| Brand | Altera | Altera | Altera | Altera | Altera | Altera |
| Package | FC-FBGA-780 (DF29) 29x29 mm | FC-FBGA-780 (DF29) 29x29 mm - same | FC-FBGA-780 (DF29) 29x29 mm - same | FC-FBGA-780 (DF29) 29x29 mm - same | FC-FBGA-780 (DF29) 29x29 mm - same | FC-FBGA-780 (DF29) 29x29 mm - same |
| Speed Grade | -5 (C5) | -5 (C5) | -4 (C4) | -3 (C3) | -6 (C6) | -5 (C5) |
| Temperature Grade | Commercial | Commercial | Commercial | Commercial | Commercial | Industrial |
| Logic Elements | 42,959 | 42,959 | 42,959 | 42,959 | 42,959 | 42,959 |
| Embedded RAM Bits | 3,517,440 | 3,517,440 | 3,517,440 | 3,517,440 | 3,517,440 | 3,517,440 |
| User I/Os | 364 | 364 | 364 | 364 | 364 | 364 |
| Lifecycle Status | EOL | EOL | EOL | EOL | EOL | EOL |
| RoHS / Lead-Free Suffix | N suffix (lead-free) | G suffix (RoHS lead-free) | N suffix (lead-free) | N suffix (lead-free) | N suffix (lead-free) | N suffix (lead-free) |
主な差別化要因
- Industry-standard -5 speed grade with full transceiver feature set （vs EP2AGX45DF29C6N)
- Industrial temperature option available in same footprint （vs EP2AGX45DF29I5N)
- Hardened PCIe Gen2 IP at 5 Gbps （vs EP2AGX45DF29C4N)
設計ノート
The 780-ball FC-FBGA package at 1 mm ball pitch requires 4-6 layer PCB stackup with microvia or via-in-pad technology for breakout. Plan power decoupling early: place 0.1 uF X7R capacitors within 100 mil of every VCC/VCCA/VCCPT/VCCP pin pair. Use a continuous ground plane on layer 2 and a power plane on layer 3 to minimize inductance for the 0.9 V core rail, which can draw 3-5 A under full utilization.
Estimated: under typical workload (50% LE utilization, 8 active transceivers at 3.125 Gbps), the EP2AGX45DF29C5N dissipates approximately 4-6 W. The FC-FBGA-780 theta_JA of about 12 C/W (with proper thermal via array under the exposed die) requires a thermal via farm of at least 25 thermal vias to inner ground/power planes. Industrial variants (EP2AGX45DF29I5N) need a heatsink or chassis thermal coupling to stay below 100 C junction at +85 C ambient.
Do not confuse the EP2AGX45DF29C5N (FC-FBGA-780) with the EP2AGX45DF25C5N (FBGA-572); the smaller package removes I/Os and may break pinout. Also verify Quartus II device support is installed for the Arria II GX family - older Quartus versions do not support this device. EOL status means design teams should plan a migration path to Cyclone V or Arria 10 for new designs.
コンプライアンス情報
RoHS and lead-free status confirmed by Intel/Altera product page. EOL lifecycle status noted as of 2026-09-08; halogen-free and conflict-minerals status not explicitly stated in retrieved web data.