EP3C80F780C7N - 81264 LE Cyclone III FPGA 780-FBGA | Intel / Altera
部品番号: EP3C80F780C7N ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $382.55 | $382.55 |
| 10 | $360 | $3,600.00 |
| 100 | $310 | $31,000.00 |
| 250 | $285 | $71,250.00 |
| 500 | $260 | $130,000.00 |
EP3C80F780C7N 概要
A Field Programmable Gate Array (FPGA) is a reprogrammable semiconductor device whose logic fabric, interconnect, and I/O cells are configured by the user via a hardware description language such as Verilog or VHDL. FPGAs sit between fixed-function ASICs and software-driven microcontrollers in the design hierarchy, offering ASIC-class parallelism without NRE cost. The Cyclone III family is Intel's mid-density, low-power line positioned for industrial control, video processing, and consumer electronics.
Key features include 81,264 LEs, 2,810,880 bits of embedded memory (RAM), 429 maximum user I/O pins, 4 PLLs, and 288 embedded 18 x 18 multipliers for DSP workloads. The device supports multiple I/O standards (LVDS, LVCMOS, SSTL, HSTL) at up to 16 global clock networks, while on-chip configuration memory retains bitstream contents without external boot ROM when configured in serial or parallel modes.
Typical applications span industrial motor control, video surveillance and image processing pipelines, automotive infotainment and driver-assistance subsystems, communication protocol bridging, and portable test-and-measurement equipment. The 65 nm process yields static power in the tens of mW, allowing fanless operation even at elevated ambient temperatures.
When designing with the EP3C80F780C7N, observe the JTAG configuration pin assignments and provide adequate decoupling (typically 0.1 uF plus 10 uF bulk per power rail) near the FBGA balls. The 780-BGA requires a multi-layer PCB with microvia or via-in-pad technology for reliable assembly.
ドロップイン代替品: EP3C80F780C7N — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: EP3C80F780C7N （同一形状・フットプリント） — 相違点: Package, Process Technology, Speed Grade, Logic Elements, Operating Temperature.
クイック比較ツール — 並列比較する代替部品を選択:
EP3C80F780C8N
✅ ドロップイン✓ 在庫あり
$240.2 / 個
データシートを見る →EP3C80F780C6N
✅ ドロップイン✓ 在庫あり
$330.2 / 個
データシートを見る →EP3C80F780C7
✅ ドロップイン✓ 在庫あり
$298.75 / 個
データシートを見る →EP3C120F780C7N
✅ ドロップイン✓ 在庫あり
$162 / 個
データシートを見る →EP3C120F780C8N
✅ ドロップイン✓ 在庫あり
価格はお問い合わせください
データシートを見る →EP3C55F780C7N
✅ ドロップイン✓ 在庫あり
$138.31 / 個
データシートを見る →EP3C80F780C7N 最大定格＆電気的特性
| Series | Cyclone III |
| Family Name | Cyclone III |
| Number of Logic Elements | 81,264 |
| Number of Logic Cells / CLBs | 81,264 |
| Total RAM Bits | 2,810,880 |
| Number of I/O | 429 |
| Voltage - Supply | 1.15 V to 3.3 V (core and I/O banks) |
| 動作温度 | 0C to +85C (commercial) |
| 実装タイプ | Surface Mount |
| パッケージ / ケース | 780-BGA (FBGA), 29 x 29 mm, 1.0 mm pitch |
| Supplier Device Package | 780-FBGA |
| Process Technology | 65 nm CMOS (TSMC low-k) |
| Number of PLLs | 4 |
| Number of Multipliers (18x18) | 288 |
| Maximum Frequency | 472.5 MHz |
| Lead Free / RoHS | Lead Free (per LCSC listing) |
| Configuration Method | JTAG, Serial, Parallel (via Quartus Prime / Quartus II) |
EP3C80F780C7N 780-fbga ピン配置ガイド
EP3C80F780C7N (780-fbga パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: EP3C80F780C7N.
詳細は データシート をご参照ください。
主な用途
EP3C80F780C7N の用途: 6 件s: Industrial Motor Control, Video Surveillance / Image Processing, Automotive Infotainment / Driver Assistance, Communication Protocol Bridging, Medical Patient Monitoring, Portable Test & Measurement.
Industrial Motor Control
The EP3C80F780C7N's 288 embedded 18x18 multipliers and 472.5 MHz max clock make it well-suited for multi-axis industrial motor control. With 81,264 logic elements, the FPGA can run a field-oriented control (FOC) loop for two to three motors simultaneously, with the 2,810,880 bits of block RAM holding state-space estimator tables and per-axis PI controller state. The 429 user I/Os accept multiple encoder and resolver feedback channels, while four PLLs synchronize the PWM generation to the system clock. The 65 nm low-power process keeps total power below 1.5 W, eliminating the need for active cooling inside sealed industrial enclosures.
おすすめ
Video Surveillance / Image Processing
Supporting up to 429 I/O pins and 472.5 MHz operation, the EP3C80F780C7N is a strong fit for video pipeline designs that ingest parallel camera data and output processed frames to DDR memory. The 288 18x18 multipliers accelerate Sobel, Laplacian, and 2D-DCT kernels, while the 2.8 Mbit block RAM serves as line buffers between pipelined stages. Designers can implement H.264 baseline encoding for D1 or 720p streams entirely in fabric. The 780-FBGA with 1.0 mm pitch is compatible with standard 4-layer PCB plus via-in-pad manufacturing used in mid-volume IP camera boards.
おすすめ
Automotive Infotainment / Driver Assistance
The 81,264-LE EP3C80F780C7N delivers the parallelism needed for automotive infotainment subsystems combining audio mixing, CAN/LIN bridging, and small-format video overlays. Its four PLLs allow multiple audio sample-rate domains (44.1/48/96 kHz) and a parallel RGB video stream to coexist on one die. The 780-FBGA at 29 x 29 mm fits behind a head-unit display PCB, while the commercial 0 to +85 C rating is acceptable for cabin modules; under-hood ADAS systems would instead require the I-grade EP3C80F780I7N, which is pin-compatible in the same 780-FBGA package.
おすすめ
Communication Protocol Bridging
With 81,264 logic elements and 16 global clock networks, the EP3C80F780C7N can implement multi-protocol bridges translating between Ethernet MAC, PCIe Gen1 endpoint, UART, SPI, and I2S in a single fabric. The 2.8 Mbit block RAM holds packet buffers while the 429 I/O pins provide generous headroom for parallel bus expansion. Industrial gateway designs use it to map legacy field-bus traffic into modern TCP/IP streams, and the device's JTAG boundary-scan chain simplifies board-level bring-up of the bridge firmware.
おすすめ
Medical Patient Monitoring
The EP3C80F780C7N is used in patient monitoring equipment where its 2.8 Mbit block RAM buffers ECG, SpO2, and respiration waveforms before display refresh, while the 288 multipliers accelerate digital filtering (bandpass, notch) on biosignals. The 429 I/Os accept parallel ADC data from multi-channel front ends, and the four PLLs derive the precise timing required for I2S audio to bedside alarm speakers. With the 0 to +85 C commercial grade, this part suits bedside monitors; portable/wearable medical devices typically migrate to lower-power Cyclone IV or Cyclone 10 devices for longer battery life.
おすすめ
Portable Test & Measurement
Bench-top oscilloscopes, logic analyzers, and protocol testers use the EP3C80F780C7N because of its 472.5 MHz max internal clock, 288 hardware multipliers, and 16 global clock networks. The FPGA can sample multiple analog channels through external ADC front ends, perform FFT-based spectrum analysis with the embedded multipliers, and drive a high-resolution color display. The 780-FBGA at 1.0 mm pitch is compatible with 4-layer PCBs; the 2.8 Mbit block RAM holds waveform capture buffers before upload over USB or Ethernet. Industrial temperature versions (I-grade) are available in the same footprint for harsh-environment test gear.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: EP3C80F780C7N — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | EP3C80F780C8N | EP3C80F780C6N | EP3C120F780C7N | EP3C55F780C7N |
|---|---|---|---|---|---|
| Brand | Intel (formerly Altera) | Intel | Intel | Intel | Intel |
| Package | 780-FBGA (29x29 mm, 1.0 mm pitch) | 780-FBGA (29x29 mm, 1.0 mm pitch) - same | 780-FBGA (29x29 mm, 1.0 mm pitch) - same | 780-FBGA (29x29 mm, 1.0 mm pitch) - same | 780-FBGA (29x29 mm, 1.0 mm pitch) - same |
| Logic Elements | 81,264 | 81,264 (same) | 81,264 (same) | 119,088 (+47%) | 55,856 (-31%) |
| Total RAM Bits | 2,810,880 | 2,810,880 (same) | 2,810,880 (same) | 3,888,000 (+38%) | 2,396,160 (-15%) |
| Maximum User I/O | 429 | 429 (same) | 429 (same) | 531 | 377 |
| Number of PLLs | 4 | 4 (same) | 4 (same) | 4 (same) | 4 (same) |
| 18x18 Multipliers | 288 | 288 (same) | 288 (same) | 288 (same) | 156 |
| Speed Grade | C7 (commercial, -2 speed grade) | C8 (faster, -1 speed grade) | C6 (slower, +1 speed grade) | C7 (same) | C7 (same) |
| Operating Temperature | 0C to +85C (commercial) | 0C to +85C (same) | 0C to +85C (same) | 0C to +85C (same) | 0C to +85C (same) |
| Process Technology | 65 nm CMOS | 65 nm CMOS (same) | 65 nm CMOS (same) | 65 nm CMOS (same) | 65 nm CMOS (same) |
主な差別化要因
- Drop-in Cyclone III density leader at 780-FBGA （vs EP3C55F780C7N)
- Balanced density and cost vs Cyclone IV/V migration （vs Cyclone IV E EP4CE80F23C8N)
- Commercial temp grade fits cost-driven industrial applications （vs EP3C80F780I7N (industrial -40 to +100 C))
設計ノート
Estimated: at typical 30% toggle activity and 50 MHz operation, the EP3C80F780C7N core draws roughly 0.4 to 0.6 A from a 1.15 V supply (~0.5 to 0.7 W). Decouple each VCCINT pin with a 0.1 uF X7R ceramic placed within 100 mil of the ball, plus one 100 uF bulk per supply rail. VCCIO banks must be powered to 1.2 V to 3.3 V depending on the I/O standard chosen; never float unused banks - tie them to a valid rail to avoid leakage through I/O buffers.
The 780-FBGA at 1.0 mm pitch requires 4-layer or 6-layer PCB with microvia (or via-in-pad) fabrication for reliable assembly. Fan-out escape routing should use dog-bone patterns with 0.4 mm (16 mil) via pads. Provide a continuous ground plane on layer 2 immediately beneath the BGA to control return currents, and stitch vias around the BGA perimeter for thermal dissipation and EMI suppression.
Never leave CONFIG_DONE, nCONFIG, or nSTATUS floating during configuration; pull-ups to VCCIO_3 (typically 3.3 V) are required. A missing decoupling capacitor or an incorrect MSEL pin setting (which selects configuration mode) is the most common bring-up failure. Verify all JTAG TCK, TMS, TDI, TDO pull directions match your JTAG programmer's reference design before powering the board.
コンプライアンス情報
Lead-free per LCSC distributor listing. Commercial temperature grade only - not AEC-Q100 qualified. RoHS compliant per distributor pages; REACH and halogen status not explicitly listed by vendors.
