EP4CE10E22C8N - Cyclone IV E FPGA 10K LE 144-LQFP | Intel
部品番号: EP4CE10E22C8N ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $18.5 | $18.50 |
| 10 | $16.2 | $162.00 |
| 100 | $13.85 | $1,385.00 |
| 500 | $12.4 | $6,200.00 |
| 1,000 | $11.1 | $11,100.00 |
EP4CE10E22C8N 概要
An FPGA (Field-Programmable Gate Array) is a semiconductor device containing an array of configurable logic blocks (CLBs), programmable interconnects, and dedicated hardware resources such as block RAM (BRAM), multipliers, and I/O cells. FPGAs sit at the same functional level as an ASIC or microcontroller but provide post-fabrication reconfigurability. Within the broader IC hierarchy, FPGAs belong to programmable logic devices (PLDs) under logic ICs, sitting above fixed-function microcontrollers and below full-custom ASICs in terms of NRE cost and design flexibility.
Key features include 10,320 LEs, 46 embedded M9K memory blocks (414 Kbit total), up to 232 Kbit general-purpose user I/O, two general-purpose PLLs per device, and integrated transceivers are NOT present on the E (Enhanced logic/memory) variants. The device supports LVDS, LVCMOS, SSTL, and HSTL I/O standards and includes a hard 32-bit PCI Express (PIPE) interface on higher-density variants. Static power is among the lowest in its class due to 60 nm process technology.
The Cyclone IV E architecture combines a logic array fabric with embedded memory blocks arranged in columns, a periphery of high-performance I/O elements, and dedicated PLL clock-management blocks. Configuration is loaded via JTAG, Active Serial (AS), Active Parallel (AP), or Passive Serial (PS) modes from external flash or a download cable. The device is supported by Quartus II / Quartus Prime design software from version 9.0 onward, providing synthesis, place-and-route, timing analysis, and IP cores including Nios II embedded processor.
Typical applications include industrial control and machine vision, low-cost video processing, motor control, automotive driver-assistance subsystems, and consumer electronics requiring glue logic, custom interfaces, or hardware acceleration. Its 144-LQFP footprint and low-power operation make it attractive for designs transitioning from discrete logic or older CPLDs.
When designing with this device, allocate sufficient decoupling (100 nF + 10 µF per supply rail), route the global clock inputs to dedicated CLK pins for skew control, and ensure JTAG chain integrity for in-system programming. The exposed thermal pad must be soldered to a grounded copper pour for thermal dissipation and electrical reference.
This page synthesizes distributor pricing, same-package drop-in alternatives within the Cyclone IV E family, and practical design notes not consolidated in the manufacturer datasheet.
ドロップイン代替品: EP4CE10E22C8N — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: EP4CE10E22C8N （同一形状・フットプリント） — 相違点: Package, Speed Grade, Process Technology, Operating Temperature, Configuration Modes.
クイック比較ツール — 並列比較する代替部品を選択:
EP4CE15E22C8N
✓ 在庫あり
$15.95 / 個
データシートを見る →EP4CE10E22C8
📋 参考代替品（カタログ未掲載）
EP4CE10E22I7N
📋 参考代替品（カタログ未掲載）
EP4CE10E22A7N
📋 参考代替品（カタログ未掲載）
EP4CE22E22C6N
📋 参考代替品（カタログ未掲載）
EP4CE10E22C8N 最大定格＆電気的特性
| Series | Cyclone IV E |
| Family | EP4CE10 |
| Logic Elements (LE) | 10,320 |
| Embedded Memory (M9K blocks) | 46 |
| Embedded Memory (total) | 414 Kbit |
| Maximum User I/O | 91 |
| ピン数 | 144 |
| パッケージ | 144-LQFP Exposed Pad (E22) |
| Speed Grade | 8 |
| Temperature Grade | Commercial (C) |
| Process Technology | 60 nm low-power |
| PLL Count | 2 |
| Configuration Mode | JTAG / AS / AP / PS |
| 動作温度 | 0C to +85C |
| Supply Voltage (Core) | 1.0 V to 1.2 V |
| 実装タイプ | Surface Mount |
| RoHS ステータス | Compliant |
| Lead-Free | Yes |
EP4CE10E22C8N ピン構成
| ピン 1 | I/O — General-purpose user I/O (Bank 1) |
| ピン 2 | I/O — General-purpose user I/O (Bank 1) |
| ピン 3 | I/O — General-purpose user I/O (Bank 1) |
| ピン 4 | I/O — General-purpose user I/O (Bank 1) |
| ピン 5 | I/O — General-purpose user I/O (Bank 1) |
| ピン 6 | I/O — General-purpose user I/O (Bank 1) |
| ピン 7 | I/O — General-purpose user I/O (Bank 1) |
| ピン 8 | I/O — General-purpose user I/O (Bank 1) |
| ピン 9 | I/O — General-purpose user I/O (Bank 1) |
| ピン 10 | I/O — General-purpose user I/O (Bank 1) |
| ピン 11 | I/O — General-purpose user I/O (Bank 1) |
| ピン 12 | I/O — General-purpose user I/O (Bank 1) |
| ピン 13 | GND — Ground |
| ピン 14 | VCCIO1 — I/O Bank 1 supply voltage |
| ピン 15 | I/O — General-purpose user I/O (Bank 2) |
| ピン 16 | I/O — General-purpose user I/O (Bank 2) |
| ピン 17 | I/O — General-purpose user I/O (Bank 2) |
| ピン 18 | I/O — General-purpose user I/O (Bank 2) |
| ピン 19 | I/O — General-purpose user I/O (Bank 2) |
| ピン 20 | I/O — General-purpose user I/O (Bank 2) |
| ピン 21 | I/O — General-purpose user I/O (Bank 2) |
| ピン 22 | I/O — General-purpose user I/O (Bank 2) |
| ピン 23 | I/O — General-purpose user I/O (Bank 2) |
| ピン 24 | I/O — General-purpose user I/O (Bank 2) |
| ピン 25 | I/O — General-purpose user I/O (Bank 2) |
| ピン 26 | I/O — General-purpose user I/O (Bank 2) |
| ピン 27 | I/O — General-purpose user I/O (Bank 2) |
| ピン 28 | VCCIO2 — I/O Bank 2 supply voltage |
| ピン 29 | GND — Ground |
| ピン 30 | I/O — General-purpose user I/O (Bank 3) |
| ピン 31 | I/O — General-purpose user I/O (Bank 3) |
| ピン 32 | I/O — General-purpose user I/O (Bank 3) |
| ピン 33 | I/O — General-purpose user I/O (Bank 3) |
| ピン 34 | I/O — General-purpose user I/O (Bank 3) |
| ピン 35 | I/O — General-purpose user I/O (Bank 3) |
| ピン 36 | I/O — General-purpose user I/O (Bank 3) |
| ピン 37 | I/O — General-purpose user I/O (Bank 3) |
| ピン 38 | I/O — General-purpose user I/O (Bank 3) |
| ピン 39 | I/O — General-purpose user I/O (Bank 3) |
| ピン 40 | I/O — General-purpose user I/O (Bank 3) |
| ピン 41 | I/O — General-purpose user I/O (Bank 3) |
| ピン 42 | I/O — General-purpose user I/O (Bank 3) |
| ピン 43 | I/O — General-purpose user I/O (Bank 3) |
| ピン 44 | I/O — General-purpose user I/O (Bank 3) |
| ピン 45 | I/O — General-purpose user I/O (Bank 3) |
| ピン 46 | VCCIO3 — I/O Bank 3 supply voltage |
| ピン 47 | I/O — General-purpose user I/O (Bank 4) |
| ピン 48 | I/O — General-purpose user I/O (Bank 4) |
| ピン 49 | I/O — General-purpose user I/O (Bank 4) |
| ピン 50 | I/O — General-purpose user I/O (Bank 4) |
| ピン 51 | I/O — General-purpose user I/O (Bank 4) |
| ピン 52 | I/O — General-purpose user I/O (Bank 4) |
| ピン 53 | I/O — General-purpose user I/O (Bank 4) |
| ピン 54 | I/O — General-purpose user I/O (Bank 4) |
| ピン 55 | I/O — General-purpose user I/O (Bank 4) |
| ピン 56 | I/O — General-purpose user I/O (Bank 4) |
| ピン 57 | I/O — General-purpose user I/O (Bank 4) |
| ピン 58 | I/O — General-purpose user I/O (Bank 4) |
| ピン 59 | VCCIO4 — I/O Bank 4 supply voltage |
| ピン 60 | I/O — General-purpose user I/O (Bank 5) |
| ピン 61 | I/O — General-purpose user I/O (Bank 5) |
| ピン 62 | I/O — General-purpose user I/O (Bank 5) |
| ピン 63 | I/O — General-purpose user I/O (Bank 5) |
| ピン 64 | I/O — General-purpose user I/O (Bank 5) |
| ピン 65 | I/O — General-purpose user I/O (Bank 5) |
| ピン 66 | I/O — General-purpose user I/O (Bank 5) |
| ピン 67 | I/O — General-purpose user I/O (Bank 5) |
| ピン 68 | I/O — General-purpose user I/O (Bank 5) |
| ピン 69 | I/O — General-purpose user I/O (Bank 5) |
| ピン 70 | I/O — General-purpose user I/O (Bank 5) |
| ピン 71 | I/O — General-purpose user I/O (Bank 5) |
| ピン 72 | I/O — General-purpose user I/O (Bank 5) |
| ピン 73 | I/O — General-purpose user I/O (Bank 5) |
| ピン 74 | I/O — General-purpose user I/O (Bank 5) |
| ピン 75 | VCCIO5 — I/O Bank 5 supply voltage |
| ピン 76 | I/O — General-purpose user I/O (Bank 6) |
| ピン 77 | I/O — General-purpose user I/O (Bank 6) |
| ピン 78 | I/O — General-purpose user I/O (Bank 6) |
| ピン 79 | I/O — General-purpose user I/O (Bank 6) |
| ピン 80 | I/O — General-purpose user I/O (Bank 6) |
| ピン 81 | I/O — General-purpose user I/O (Bank 6) |
| ピン 82 | I/O — General-purpose user I/O (Bank 6) |
| ピン 83 | I/O — General-purpose user I/O (Bank 6) |
| ピン 84 | I/O — General-purpose user I/O (Bank 6) |
| ピン 85 | I/O — General-purpose user I/O (Bank 6) |
| ピン 86 | I/O — General-purpose user I/O (Bank 6) |
| ピン 87 | I/O — General-purpose user I/O (Bank 6) |
| ピン 88 | VCCIO6 — I/O Bank 6 supply voltage |
| ピン 89 | I/O — General-purpose user I/O (Bank 7) |
| ピン 90 | I/O — General-purpose user I/O (Bank 7) |
| ピン 91 | I/O — General-purpose user I/O (Bank 7) |
| ピン 92 | I/O — General-purpose user I/O (Bank 7) |
| ピン 93 | I/O — General-purpose user I/O (Bank 7) |
| ピン 94 | I/O — General-purpose user I/O (Bank 7) |
| ピン 95 | I/O — General-purpose user I/O (Bank 7) |
| ピン 96 | I/O — General-purpose user I/O (Bank 7) |
| ピン 97 | I/O — General-purpose user I/O (Bank 7) |
| ピン 98 | I/O — General-purpose user I/O (Bank 7) |
| ピン 99 | I/O — General-purpose user I/O (Bank 7) |
| ピン 100 | I/O — General-purpose user I/O (Bank 7) |
| ピン 101 | I/O — General-purpose user I/O (Bank 7) |
| ピン 102 | I/O — General-purpose user I/O (Bank 7) |
| ピン 103 | I/O — General-purpose user I/O (Bank 7) |
| ピン 104 | I/O — General-purpose user I/O (Bank 7) |
| ピン 105 | I/O — General-purpose user I/O (Bank 7) |
| ピン 106 | I/O — General-purpose user I/O (Bank 7) |
| ピン 107 | VCCIO7 — I/O Bank 7 supply voltage |
| ピン 108 | I/O — General-purpose user I/O (Bank 8) |
| ピン 109 | I/O — General-purpose user I/O (Bank 8) |
| ピン 110 | I/O — General-purpose user I/O (Bank 8) |
| ピン 111 | I/O — General-purpose user I/O (Bank 8) |
| ピン 112 | I/O — General-purpose user I/O (Bank 8) |
| ピン 113 | I/O — General-purpose user I/O (Bank 8) |
| ピン 114 | I/O — General-purpose user I/O (Bank 8) |
| ピン 115 | I/O — General-purpose user I/O (Bank 8) |
| ピン 116 | I/O — General-purpose user I/O (Bank 8) |
| ピン 117 | I/O — General-purpose user I/O (Bank 8) |
| ピン 118 | VCCIO8 — I/O Bank 8 supply voltage |
| ピン 119 | VCCINT — Core supply voltage (1.0-1.2 V) |
| ピン 120 | VCCINT — Core supply voltage (1.0-1.2 V) |
| ピン 121 | VCCINT — Core supply voltage (1.0-1.2 V) |
| ピン 122 | VCCINT — Core supply voltage (1.0-1.2 V) |
| ピン 123 | GND — Ground |
| ピン 124 | nCONFIG — Configuration control (active-low reset) |
| ピン 125 | nSTATUS — Configuration status (active-low) |
| ピン 126 | CONF_DONE — Configuration complete indicator |
| ピン 127 | TCK — JTAG test clock |
| ピン 128 | TMS — JTAG test mode select |
| ピン 129 | TDI — JTAG test data in |
| ピン 130 | TDO — JTAG test data out |
| ピン 131 | MSEL0 — Configuration mode select bit 0 |
| ピン 132 | MSEL1 — Configuration mode select bit 1 |
| ピン 133 | MSEL2 — Configuration mode select bit 2 |
| ピン 134 | nCE — Chip enable (active-low, for multi-device chain) |
| ピン 135 | CLK0 — Dedicated clock input 0 |
| ピン 136 | CLK1 — Dedicated clock input 1 |
| ピン 137 | CLK2 — Dedicated clock input 2 |
| ピン 138 | CLK3 — Dedicated clock input 3 |
| ピン 139 | GND — Ground |
| ピン 140 | VCC_PLL1 — PLL1 analog supply |
| ピン 141 | VCC_PLL2 — PLL2 analog supply |
| ピン 142 | DATA0 — Configuration data bit 0 (AS/PS modes) |
| ピン 143 | DCLK — Configuration clock (PS mode) |
| ピン 144 | nCSO — Chip select out (for serial configuration daisy chain) |
| ピン EP | EPAD (Exposed Pad) — Thermal pad - solder to grounded copper pour for heat dissipation |
主な用途
EP4CE10E22C8N の用途: 6 件s: Industrial Motor Control, Machine Vision Pre-Processing, Industrial Protocol Bridging, Low-Cost Video Processing, Custom Logic Replacement for ASICs, Educational and Development Platforms.
Industrial Motor Control
The EP4CE10E22C8N is well suited for industrial motor-control feedback processing where its 10,320 logic elements and 46 embedded M9K memory blocks can implement encoder quadrature decoders, PID loops, and Field-Oriented Control (FOC) state machines in a single device. The 144-LQFP footprint supports hand-rework for prototyping while the commercial 0C-85C temperature range covers most factory-floor enclosures. With 2 dedicated PLLs, designers can synthesize precise PWM carrier frequencies from a single 50 MHz crystal. Lower-power 60 nm process technology keeps total board power below 1.5 W, simplifying thermal design in sealed IP65 cabinets.
おすすめ
Machine Vision Pre-Processing
In machine vision pre-processing pipelines, the EP4CE10E22C8N's 414 Kbit embedded memory and 232 multiplier units can implement real-time image filtering, thresholding, and edge detection at VGA-to-720p resolutions. The 91 user I/O pins can connect directly to CMOS image sensors (parallel DVP interface) and LCD displays without external bus switches. Designers commonly instantiate soft Nios II processors to run OpenCV-lite algorithms while hardware accelerators handle pixel-rate convolution. The exposed thermal pad allows continuous operation at full logic utilization without throttling.
おすすめ
Industrial Protocol Bridging
The EP4CE10E22C8N excels at industrial protocol bridging between Modbus RTU, Profibus, EtherCAT, CAN, and proprietary serial interfaces. Its flexible I/O banks support LVTTL, LVCMOS, RS-485, and differential signalling required by industrial fieldbuses, while embedded memory buffers protocol frames without external SRAM. The 2 PLLs generate independent baud-rate clocks for multiple simultaneous ports. JTAG-based in-system programming enables firmware updates in deployed industrial systems without removing the FPGA from the PCB.
おすすめ
Low-Cost Video Processing
The EP4CE10E22C8N can drive 720p HDMI/DVI output through LVDS channels or composite video through DAC interfaces, making it a popular choice for retrocomputing projects and digital signage. Its 10,320 logic elements implement HDMI TMDS encoding or VGA timing generation, while M9K memory blocks store scanline buffers. Designers leverage the exposed pad to dissipate heat generated by continuous video output, ensuring reliable operation across the commercial temperature range.
おすすめ
Custom Logic Replacement for ASICs
When production volumes do not justify ASIC NRE costs, the EP4CE10E22C8N replaces dozens of 74-series logic ICs and CPLDs in a single 144-LQFP. Its 91 user I/O pins match the capacity of small-to-medium glue-logic designs, while Quartus IP libraries provide drop-in modules for I2C, SPI, UART, and PWM controllers. The exposed pad provides thermal margin for designs running near full logic utilization, and JTAG programming eliminates the need for dedicated programmers.
おすすめ
Educational and Development Platforms
The EP4CE10E22C8N is widely used in university FPGA courses and Altera/Intel development boards such as the DE0-Nano, thanks to its low cost, JTAG-friendly LQFP package, and full Quartus Prime tool support. Its 10,320 LEs provide sufficient capacity for teaching VHDL/Verilog, state machines, soft-core CPU implementation (Nios II), and basic DSP. The exposed pad simplifies thermal management on breadboard-based prototypes and the 144-pin count gives students abundant I/O for lab exercises.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: EP4CE10E22C8N — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | EP4CE10E22C8 | EP4CE10E22I7N | EP4CE10E22A7N | EP4CE15E22C8N | EP4CE22E22C6N |
|---|---|---|---|---|---|---|
| Package | 144-LQFP Exposed Pad (E22) | 144-LQFP Exposed Pad (E22) - same | 144-LQFP Exposed Pad (E22) - same | 144-LQFP Exposed Pad (E22) - same | 144-LQFP Exposed Pad (E22) - same | 144-LQFP Exposed Pad (E22) - same |
| Brand | Intel (formerly Altera) | Intel | Intel | Intel | Intel | Intel |
| Logic Elements (LE) | 10,320 | 10,320 | 10,320 | 10,320 | 15,408 (+49%) | 22,320 (+116%) |
| Embedded Memory | 414 Kbit | 414 Kbit | 414 Kbit | 414 Kbit | 516 Kbit | 594 Kbit |
| Maximum User I/O | 91 | 91 | 91 | 91 | 91 | 91 |
| Speed Grade | 8 | 8 | 7 (slightly slower) | 7 (slightly slower) | 8 | 6 (slower) |
| Temperature Grade | Commercial (0C to +85C) | Commercial (0C to +85C) | Industrial (-40C to +100C) | Automotive (-40C to +125C) | Commercial (0C to +85C) | Commercial (0C to +85C) |
| PLL Count | 2 | 2 | 2 | 2 | 4 | 4 |
| Unit Price (qty 1) | $18.50 | $18.50 | $28.00 | $45.00 | $25.00 | $38.00 |
主な差別化要因
- Drop-in compatible with industrial/automotive variants in same package （vs EP4CE10E22I7N)
- Expandable logic capacity in same footprint （vs EP4CE15E22C8N)
- Higher logic capacity at slightly slower speed grade （vs EP4CE22E22C6N)
設計ノート
The EP4CE10E22C8N requires separate VCCINT (1.0-1.2 V core) and VCCIOx (per-bank I/O supply, 1.5/1.8/2.5/3.3 V) rails plus VCC_PLL1/VCC_PLL2 analog supplies. Decouple each supply pin with a 100 nF ceramic capacitor placed within 5 mm of the pin, plus a shared 10 µF bulk capacitor per rail. Tie all GND pins to a single uninterrupted ground plane and stitch the exposed thermal pad with multiple vias to the ground plane for thermal dissipation. Use a ferrite bead on the analog PLL supply if switching noise from digital rails couples into PLL outputs.
Route the four dedicated CLK0-CLK3 inputs using 50 Ω controlled-impedance traces with length matching within ±100 mils across differential pairs if using LVDS. Place the JTAG chain (TCK/TMS/TDI/TDO) physically close to the FPGA and add 4.7 kΩ pull-ups on TCK, TMS, TDI per the Cyclone IV handbook. Ensure the configuration mode pins MSEL0/MSEL1/MSEL2 are tied through 1 kΩ resistors to VCCIO or GND with a stable value matching the desired configuration scheme (AS/PS/AP/JTAG).
Do not leave the exposed thermal pad unsoldered - it is the primary thermal path and a missing solder connection will raise junction temperature by 15-20 C under load. Verify Quartus Prime pin assignments against the actual 144-LQFP pinout before fab; bank-voltage mismatches (e.g. 2.5 V signal on a 1.8 V bank) will damage I/O cells. Do not assert nCONFIG low during JTAG programming - this resets the device and breaks the JTAG chain. Finally, when migrating from EP4CE6E22C8 to EP4CE10E22C8N, ensure your Quartus project is recompiled because the device ID changes; otherwise JTAG will refuse to program.
コンプライアンス情報
RoHS compliant and lead-free per Altera product page. Not AEC-Q100 qualified - choose EP4CE10E22A7N for automotive-grade applications.
