EP4CE10E22C8N - Cyclone IV E FPGA 10K LE 144-LQFP | Intel
MPN: EP4CE10E22C8N ✓ פעילEP4CE10E22C8N סקירה
An FPGA (Field-Programmable Gate Array) is a semiconductor device containing an array of configurable logic blocks (CLBs), programmable interconnects, and dedicated hardware resources such as block RAM (BRAM), multipliers, and I/O cells. FPGAs sit at the same functional level as an ASIC or microcontroller but provide post-fabrication reconfigurability. Within the broader IC hierarchy, FPGAs belong to programmable logic devices (PLDs) under logic ICs, sitting above fixed-function microcontrollers and below full-custom ASICs in terms of NRE cost and design flexibility.
Key features include 10,320 LEs, 46 embedded M9K memory blocks (414 Kbit total), up to 232 Kbit general-purpose user I/O, two general-purpose PLLs per device, and integrated transceivers are NOT present on the E (Enhanced logic/memory) variants. The device supports LVDS, LVCMOS, SSTL, and HSTL I/O standards and includes a hard 32-bit PCI Express (PIPE) interface on higher-density variants. Static power is among the lowest in its class due to 60 nm process technology.
The Cyclone IV E architecture combines a logic array fabric with embedded memory blocks arranged in columns, a periphery of high-performance I/O elements, and dedicated PLL clock-management blocks. Configuration is loaded via JTAG, Active Serial (AS), Active Parallel (AP), or Passive Serial (PS) modes from external flash or a download cable. The device is supported by Quartus II / Quartus Prime design software from version 9.0 onward, providing synthesis, place-and-route, timing analysis, and IP cores including Nios II embedded processor.
Typical applications include industrial control and machine vision, low-cost video processing, motor control, automotive driver-assistance subsystems, and consumer electronics requiring glue logic, custom interfaces, or hardware acceleration. Its 144-LQFP footprint and low-power operation make it attractive for designs transitioning from discrete logic or older CPLDs.
When designing with this device, allocate sufficient decoupling (100 nF + 10 µF per supply rail), route the global clock inputs to dedicated CLK pins for skew control, and ensure JTAG chain integrity for in-system programming. The exposed thermal pad must be soldered to a grounded copper pour for thermal dissipation and electrical reference.
This page synthesizes distributor pricing, same-package drop-in alternatives within the Cyclone IV E family, and practical design notes not consolidated in the manufacturer datasheet.
חלופות תחליף ישיר עבור EP4CE10E22C8N — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם EP4CE10E22C8N (אותו גורם צורה וטביעת רגל) — שונים ב Package, Embedded Memory, Speed Grade, Operating Temperature, Process Technology.
EP4CE15E22C8N
צור קשר לקבלת מחיר
הצג גיליון נתונים ←EP4CE10E22C8
צור קשר לקבלת מחיר
הצג גיליון נתונים ←EP4CE10E22I7N
📋 חלופה להתייחסות (לא בקטלוג)
EP4CE10E22A7N
📋 חלופה להתייחסות (לא בקטלוג)
EP4CE22E22C6N
📋 חלופה להתייחסות (לא בקטלוג)
EP4CE10E22C8N דירוגים מרביים ומאפיינים חשמליים
| Series | Cyclone IV E |
| Family | EP4CE10 |
| Logic Elements (LE) | 10,320 |
| Embedded Memory (M9K blocks) | 46 |
| Embedded Memory (total) | 414 Kbit |
| Maximum User I/O | 91 |
| מספר פינים | 144 |
| מארז | 144-LQFP Exposed Pad (E22) |
| Speed Grade | 8 |
| Temperature Grade | Commercial (C) |
| Process Technology | 60 nm low-power |
| PLL Count | 2 |
| Configuration Mode | JTAG / AS / AP / PS |
| טמפרטורת פעולה | 0C to +85C |
| Supply Voltage (Core) | 1.0 V to 1.2 V |
| סוג הרכבה | Surface Mount |
| סטטוס RoHS | Compliant |
| Lead-Free | Yes |
תצורת פינים של EP4CE10E22C8N
| פין 1 | I/O — General-purpose user I/O (Bank 1) |
| פין 2 | I/O — General-purpose user I/O (Bank 1) |
| פין 3 | I/O — General-purpose user I/O (Bank 1) |
| פין 4 | I/O — General-purpose user I/O (Bank 1) |
| פין 5 | I/O — General-purpose user I/O (Bank 1) |
| פין 6 | I/O — General-purpose user I/O (Bank 1) |
| פין 7 | I/O — General-purpose user I/O (Bank 1) |
| פין 8 | I/O — General-purpose user I/O (Bank 1) |
| פין 9 | I/O — General-purpose user I/O (Bank 1) |
| פין 10 | I/O — General-purpose user I/O (Bank 1) |
| פין 11 | I/O — General-purpose user I/O (Bank 1) |
| פין 12 | I/O — General-purpose user I/O (Bank 1) |
| פין 13 | GND — Ground |
| פין 14 | VCCIO1 — I/O Bank 1 supply voltage |
| פין 15 | I/O — General-purpose user I/O (Bank 2) |
| פין 16 | I/O — General-purpose user I/O (Bank 2) |
| פין 17 | I/O — General-purpose user I/O (Bank 2) |
| פין 18 | I/O — General-purpose user I/O (Bank 2) |
| פין 19 | I/O — General-purpose user I/O (Bank 2) |
| פין 20 | I/O — General-purpose user I/O (Bank 2) |
| פין 21 | I/O — General-purpose user I/O (Bank 2) |
| פין 22 | I/O — General-purpose user I/O (Bank 2) |
| פין 23 | I/O — General-purpose user I/O (Bank 2) |
| פין 24 | I/O — General-purpose user I/O (Bank 2) |
| פין 25 | I/O — General-purpose user I/O (Bank 2) |
| פין 26 | I/O — General-purpose user I/O (Bank 2) |
| פין 27 | I/O — General-purpose user I/O (Bank 2) |
| פין 28 | VCCIO2 — I/O Bank 2 supply voltage |
| פין 29 | GND — Ground |
| פין 30 | I/O — General-purpose user I/O (Bank 3) |
| פין 31 | I/O — General-purpose user I/O (Bank 3) |
| פין 32 | I/O — General-purpose user I/O (Bank 3) |
| פין 33 | I/O — General-purpose user I/O (Bank 3) |
| פין 34 | I/O — General-purpose user I/O (Bank 3) |
| פין 35 | I/O — General-purpose user I/O (Bank 3) |
| פין 36 | I/O — General-purpose user I/O (Bank 3) |
| פין 37 | I/O — General-purpose user I/O (Bank 3) |
| פין 38 | I/O — General-purpose user I/O (Bank 3) |
| פין 39 | I/O — General-purpose user I/O (Bank 3) |
| פין 40 | I/O — General-purpose user I/O (Bank 3) |
| פין 41 | I/O — General-purpose user I/O (Bank 3) |
| פין 42 | I/O — General-purpose user I/O (Bank 3) |
| פין 43 | I/O — General-purpose user I/O (Bank 3) |
| פין 44 | I/O — General-purpose user I/O (Bank 3) |
| פין 45 | I/O — General-purpose user I/O (Bank 3) |
| פין 46 | VCCIO3 — I/O Bank 3 supply voltage |
| פין 47 | I/O — General-purpose user I/O (Bank 4) |
| פין 48 | I/O — General-purpose user I/O (Bank 4) |
| פין 49 | I/O — General-purpose user I/O (Bank 4) |
| פין 50 | I/O — General-purpose user I/O (Bank 4) |
| פין 51 | I/O — General-purpose user I/O (Bank 4) |
| פין 52 | I/O — General-purpose user I/O (Bank 4) |
| פין 53 | I/O — General-purpose user I/O (Bank 4) |
| פין 54 | I/O — General-purpose user I/O (Bank 4) |
| פין 55 | I/O — General-purpose user I/O (Bank 4) |
| פין 56 | I/O — General-purpose user I/O (Bank 4) |
| פין 57 | I/O — General-purpose user I/O (Bank 4) |
| פין 58 | I/O — General-purpose user I/O (Bank 4) |
| פין 59 | VCCIO4 — I/O Bank 4 supply voltage |
| פין 60 | I/O — General-purpose user I/O (Bank 5) |
| פין 61 | I/O — General-purpose user I/O (Bank 5) |
| פין 62 | I/O — General-purpose user I/O (Bank 5) |
| פין 63 | I/O — General-purpose user I/O (Bank 5) |
| פין 64 | I/O — General-purpose user I/O (Bank 5) |
| פין 65 | I/O — General-purpose user I/O (Bank 5) |
| פין 66 | I/O — General-purpose user I/O (Bank 5) |
| פין 67 | I/O — General-purpose user I/O (Bank 5) |
| פין 68 | I/O — General-purpose user I/O (Bank 5) |
| פין 69 | I/O — General-purpose user I/O (Bank 5) |
| פין 70 | I/O — General-purpose user I/O (Bank 5) |
| פין 71 | I/O — General-purpose user I/O (Bank 5) |
| פין 72 | I/O — General-purpose user I/O (Bank 5) |
| פין 73 | I/O — General-purpose user I/O (Bank 5) |
| פין 74 | I/O — General-purpose user I/O (Bank 5) |
| פין 75 | VCCIO5 — I/O Bank 5 supply voltage |
| פין 76 | I/O — General-purpose user I/O (Bank 6) |
| פין 77 | I/O — General-purpose user I/O (Bank 6) |
| פין 78 | I/O — General-purpose user I/O (Bank 6) |
| פין 79 | I/O — General-purpose user I/O (Bank 6) |
| פין 80 | I/O — General-purpose user I/O (Bank 6) |
| פין 81 | I/O — General-purpose user I/O (Bank 6) |
| פין 82 | I/O — General-purpose user I/O (Bank 6) |
| פין 83 | I/O — General-purpose user I/O (Bank 6) |
| פין 84 | I/O — General-purpose user I/O (Bank 6) |
| פין 85 | I/O — General-purpose user I/O (Bank 6) |
| פין 86 | I/O — General-purpose user I/O (Bank 6) |
| פין 87 | I/O — General-purpose user I/O (Bank 6) |
| פין 88 | VCCIO6 — I/O Bank 6 supply voltage |
| פין 89 | I/O — General-purpose user I/O (Bank 7) |
| פין 90 | I/O — General-purpose user I/O (Bank 7) |
| פין 91 | I/O — General-purpose user I/O (Bank 7) |
| פין 92 | I/O — General-purpose user I/O (Bank 7) |
| פין 93 | I/O — General-purpose user I/O (Bank 7) |
| פין 94 | I/O — General-purpose user I/O (Bank 7) |
| פין 95 | I/O — General-purpose user I/O (Bank 7) |
| פין 96 | I/O — General-purpose user I/O (Bank 7) |
| פין 97 | I/O — General-purpose user I/O (Bank 7) |
| פין 98 | I/O — General-purpose user I/O (Bank 7) |
| פין 99 | I/O — General-purpose user I/O (Bank 7) |
| פין 100 | I/O — General-purpose user I/O (Bank 7) |
| פין 101 | I/O — General-purpose user I/O (Bank 7) |
| פין 102 | I/O — General-purpose user I/O (Bank 7) |
| פין 103 | I/O — General-purpose user I/O (Bank 7) |
| פין 104 | I/O — General-purpose user I/O (Bank 7) |
| פין 105 | I/O — General-purpose user I/O (Bank 7) |
| פין 106 | I/O — General-purpose user I/O (Bank 7) |
| פין 107 | VCCIO7 — I/O Bank 7 supply voltage |
| פין 108 | I/O — General-purpose user I/O (Bank 8) |
| פין 109 | I/O — General-purpose user I/O (Bank 8) |
| פין 110 | I/O — General-purpose user I/O (Bank 8) |
| פין 111 | I/O — General-purpose user I/O (Bank 8) |
| פין 112 | I/O — General-purpose user I/O (Bank 8) |
| פין 113 | I/O — General-purpose user I/O (Bank 8) |
| פין 114 | I/O — General-purpose user I/O (Bank 8) |
| פין 115 | I/O — General-purpose user I/O (Bank 8) |
| פין 116 | I/O — General-purpose user I/O (Bank 8) |
| פין 117 | I/O — General-purpose user I/O (Bank 8) |
| פין 118 | VCCIO8 — I/O Bank 8 supply voltage |
| פין 119 | VCCINT — Core supply voltage (1.0-1.2 V) |
| פין 120 | VCCINT — Core supply voltage (1.0-1.2 V) |
| פין 121 | VCCINT — Core supply voltage (1.0-1.2 V) |
| פין 122 | VCCINT — Core supply voltage (1.0-1.2 V) |
| פין 123 | GND — Ground |
| פין 124 | nCONFIG — Configuration control (active-low reset) |
| פין 125 | nSTATUS — Configuration status (active-low) |
| פין 126 | CONF_DONE — Configuration complete indicator |
| פין 127 | TCK — JTAG test clock |
| פין 128 | TMS — JTAG test mode select |
| פין 129 | TDI — JTAG test data in |
| פין 130 | TDO — JTAG test data out |
| פין 131 | MSEL0 — Configuration mode select bit 0 |
| פין 132 | MSEL1 — Configuration mode select bit 1 |
| פין 133 | MSEL2 — Configuration mode select bit 2 |
| פין 134 | nCE — Chip enable (active-low, for multi-device chain) |
| פין 135 | CLK0 — Dedicated clock input 0 |
| פין 136 | CLK1 — Dedicated clock input 1 |
| פין 137 | CLK2 — Dedicated clock input 2 |
| פין 138 | CLK3 — Dedicated clock input 3 |
| פין 139 | GND — Ground |
| פין 140 | VCC_PLL1 — PLL1 analog supply |
| פין 141 | VCC_PLL2 — PLL2 analog supply |
| פין 142 | DATA0 — Configuration data bit 0 (AS/PS modes) |
| פין 143 | DCLK — Configuration clock (PS mode) |
| פין 144 | nCSO — Chip select out (for serial configuration daisy chain) |
| פין EP | EPAD (Exposed Pad) — Thermal pad - solder to grounded copper pour for heat dissipation |
יישומים טיפוסיים
EP4CE10E22C8N מתאים עבור 6 יישוםs: Industrial Motor Control, Machine Vision Pre-Processing, Industrial Protocol Bridging, Low-Cost Video Processing, Custom Logic Replacement for ASICs, Educational and Development Platforms.
Industrial Motor Control
The EP4CE10E22C8N is well suited for industrial motor-control feedback processing where its 10,320 logic elements and 46 embedded M9K memory blocks can implement encoder quadrature decoders, PID loops, and Field-Oriented Control (FOC) state machines in a single device. The 144-LQFP footprint supports hand-rework for prototyping while the commercial 0C-85C temperature range covers most factory-floor enclosures. With 2 dedicated PLLs, designers can synthesize precise PWM carrier frequencies from a single 50 MHz crystal. Lower-power 60 nm process technology keeps total board power below 1.5 W, simplifying thermal design in sealed IP65 cabinets.
מומלץ
Machine Vision Pre-Processing
In machine vision pre-processing pipelines, the EP4CE10E22C8N's 414 Kbit embedded memory and 232 multiplier units can implement real-time image filtering, thresholding, and edge detection at VGA-to-720p resolutions. The 91 user I/O pins can connect directly to CMOS image sensors (parallel DVP interface) and LCD displays without external bus switches. Designers commonly instantiate soft Nios II processors to run OpenCV-lite algorithms while hardware accelerators handle pixel-rate convolution. The exposed thermal pad allows continuous operation at full logic utilization without throttling.
מומלץ
Industrial Protocol Bridging
The EP4CE10E22C8N excels at industrial protocol bridging between Modbus RTU, Profibus, EtherCAT, CAN, and proprietary serial interfaces. Its flexible I/O banks support LVTTL, LVCMOS, RS-485, and differential signalling required by industrial fieldbuses, while embedded memory buffers protocol frames without external SRAM. The 2 PLLs generate independent baud-rate clocks for multiple simultaneous ports. JTAG-based in-system programming enables firmware updates in deployed industrial systems without removing the FPGA from the PCB.
מומלץ
Low-Cost Video Processing
The EP4CE10E22C8N can drive 720p HDMI/DVI output through LVDS channels or composite video through DAC interfaces, making it a popular choice for retrocomputing projects and digital signage. Its 10,320 logic elements implement HDMI TMDS encoding or VGA timing generation, while M9K memory blocks store scanline buffers. Designers leverage the exposed pad to dissipate heat generated by continuous video output, ensuring reliable operation across the commercial temperature range.
מומלץ
Custom Logic Replacement for ASICs
When production volumes do not justify ASIC NRE costs, the EP4CE10E22C8N replaces dozens of 74-series logic ICs and CPLDs in a single 144-LQFP. Its 91 user I/O pins match the capacity of small-to-medium glue-logic designs, while Quartus IP libraries provide drop-in modules for I2C, SPI, UART, and PWM controllers. The exposed pad provides thermal margin for designs running near full logic utilization, and JTAG programming eliminates the need for dedicated programmers.
מומלץ
Educational and Development Platforms
The EP4CE10E22C8N is widely used in university FPGA courses and Altera/Intel development boards such as the DE0-Nano, thanks to its low cost, JTAG-friendly LQFP package, and full Quartus Prime tool support. Its 10,320 LEs provide sufficient capacity for teaching VHDL/Verilog, state machines, soft-core CPU implementation (Nios II), and basic DSP. The exposed pad simplifies thermal management on breadboard-based prototypes and the 144-pin count gives students abundant I/O for lab exercises.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור EP4CE10E22C8N — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | EP4CE10E22C8 | EP4CE10E22I7N | EP4CE10E22A7N | EP4CE15E22C8N | EP4CE22E22C6N |
|---|---|---|---|---|---|---|
| Package | 144-LQFP Exposed Pad (E22) | 144-LQFP Exposed Pad (E22) - same | 144-LQFP Exposed Pad (E22) - same | 144-LQFP Exposed Pad (E22) - same | 144-LQFP Exposed Pad (E22) - same | 144-LQFP Exposed Pad (E22) - same |
| Brand | Intel (formerly Altera) | Intel | Intel | Intel | Intel | Intel |
| Logic Elements (LE) | 10,320 | 10,320 | 10,320 | 10,320 | 15,408 (+49%) | 22,320 (+116%) |
| Embedded Memory | 414 Kbit | 414 Kbit | 414 Kbit | 414 Kbit | 516 Kbit | 594 Kbit |
| Maximum User I/O | 91 | 91 | 91 | 91 | 91 | 91 |
| Speed Grade | 8 | 8 | 7 (slightly slower) | 7 (slightly slower) | 8 | 6 (slower) |
| Temperature Grade | Commercial (0C to +85C) | Commercial (0C to +85C) | Industrial (-40C to +100C) | Automotive (-40C to +125C) | Commercial (0C to +85C) | Commercial (0C to +85C) |
| PLL Count | 2 | 2 | 2 | 2 | 4 | 4 |
| Unit Price (qty 1) | $18.50 | $18.50 | $28.00 | $45.00 | $25.00 | $38.00 |
מבדילים עיקריים
- Drop-in compatible with industrial/automotive variants in same package (לעומתEP4CE10E22I7N)
- Expandable logic capacity in same footprint (לעומתEP4CE15E22C8N)
- Higher logic capacity at slightly slower speed grade (לעומתEP4CE22E22C6N)
הערות תכנון
The EP4CE10E22C8N requires separate VCCINT (1.0-1.2 V core) and VCCIOx (per-bank I/O supply, 1.5/1.8/2.5/3.3 V) rails plus VCC_PLL1/VCC_PLL2 analog supplies. Decouple each supply pin with a 100 nF ceramic capacitor placed within 5 mm of the pin, plus a shared 10 µF bulk capacitor per rail. Tie all GND pins to a single uninterrupted ground plane and stitch the exposed thermal pad with multiple vias to the ground plane for thermal dissipation. Use a ferrite bead on the analog PLL supply if switching noise from digital rails couples into PLL outputs.
Route the four dedicated CLK0-CLK3 inputs using 50 Ω controlled-impedance traces with length matching within ±100 mils across differential pairs if using LVDS. Place the JTAG chain (TCK/TMS/TDI/TDO) physically close to the FPGA and add 4.7 kΩ pull-ups on TCK, TMS, TDI per the Cyclone IV handbook. Ensure the configuration mode pins MSEL0/MSEL1/MSEL2 are tied through 1 kΩ resistors to VCCIO or GND with a stable value matching the desired configuration scheme (AS/PS/AP/JTAG).
Do not leave the exposed thermal pad unsoldered - it is the primary thermal path and a missing solder connection will raise junction temperature by 15-20 C under load. Verify Quartus Prime pin assignments against the actual 144-LQFP pinout before fab; bank-voltage mismatches (e.g. 2.5 V signal on a 1.8 V bank) will damage I/O cells. Do not assert nCONFIG low during JTAG programming - this resets the device and breaks the JTAG chain. Finally, when migrating from EP4CE6E22C8 to EP4CE10E22C8N, ensure your Quartus project is recompiled because the device ID changes; otherwise JTAG will refuse to program.
מידע על תאימות
RoHS compliant and lead-free per Altera product page. Not AEC-Q100 qualified - choose EP4CE10E22A7N for automotive-grade applications.
