EPM7256AEQC208-5N - MAX 7000A CPLD, 256 Macro, 5ns | Intel
部品番号: EPM7256AEQC208-5N ✗ 生産終了| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $18.5 | $18.50 |
| 10 | $16.4 | $164.00 |
| 100 | $14.2 | $1,420.00 |
| 500 | $12.8 | $6,400.00 |
| 1,000 | $11.5 | $11,500.00 |
EPM7256AEQC208-5N 概要
A CPLD (Complex Programmable Logic Device) is a non-volatile programmable logic device that sits between simple PAL/GAL devices and high-density FPGAs in the programmable logic hierarchy: SPLD -> CPLD -> FPGA. Unlike SRAM-based FPGAs, MAX 7000A devices use EEPROM configuration cells that retain the bitstream without external memory, enabling instant-on behavior. Within the broader taxonomy of digital semiconductors, the EPM7256AEQC208-5N belongs to programmable logic -> logic ICs -> integrated circuits.
Key features include a maximum internal frequency of 172.4 MHz, a 4.5 ns registered propagation delay, and 16 dedicated input pins plus 164 bidirectional I/O pins. The architecture combines the FastTrack interconnect matrix with each macrocell containing a programmable AND/OR array, a product-term allocator, and a flipflop. The 3.3 V supply reduces power consumption by approximately 50% versus the legacy 5 V MAX 7000 family while preserving pin compatibility with existing designs.
Typical applications include bus interface bridging, glue-logic consolidation, peripheral I/O expansion, and control-state-machine implementation in telecom, industrial, and embedded systems. Designers use the part to replace discrete 74LS/74HC logic, reducing board area and BOM cost. The JTAG chain and built-in ISP (In-System Programmability) enable field firmware updates without removing the device from the board, a key advantage in deployed systems.
When designing with this device, ensure the Quartus II / MAX+PLUS II design software is used for fitting and that the JTAG pins (TDI/TDO/TMS/TCK) are pulled to valid logic levels through 10 kohm resistors. The PQFP-208 footprint requires a 0.5 mm lead pitch and IPC-7351 land patterns, and the device is rated for commercial temperature operation (0 C to +70 C).
This page synthesizes distributor pricing, same-brand drop-in alternatives drawn from the MAX 7000A family, and practical design notes not found in the manufacturer datasheet.
ドロップイン代替品: EPM7256AEQC208-5N — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: EPM7256AEQC208-5N （同一形状・フットプリント） — 相違点: Package, Maximum Internal Frequency, Operating Temperature, Pin-to-Pin Propagation Delay (tPD), RoHS Status.
クイック比較ツール — 並列比較する代替部品を選択:
EPM7256AEQC208-10N
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
EPM7256AEQC208-7N
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
EPM7256AEQC208-5N 最大定格＆電気的特性
| Family | MAX 7000A |
| Logic Family / Base Technology | CMOS, EEPROM-based |
| Usable Gates | 5,000 |
| Macrocells | 256 |
| User I/Os | 164 |
| Dedicated Inputs | 16 |
| ピン数 | 208 |
| パッケージ | 208-pin PQFP (Plastic Quad Flat Pack) |
| Supply Voltage (VCCINT) | 3.3 V |
| Maximum Internal Frequency | 172.4 MHz |
| Pin-to-Pin Propagation Delay (tPD) | 5.5 ns |
| Speed Grade | -5 |
| 動作温度 | 0 C to +70 C (Commercial) |
| Programming Interface | JTAG (IEEE Std. 1149.1) / ISP |
| 実装タイプ | Surface Mount |
| RoHS ステータス | unknown |
EPM7256AEQC208-5N ピン構成
| ピン 1 | I/O — User I/O pin (global) |
| ピン 2 | I/O — User I/O pin (global) |
| ピン 3 | I/O — User I/O pin (global) |
| ピン 4 | I/O — User I/O pin (global) |
| ピン 5 | I/O — User I/O pin (global) |
| ピン 6 | I/O — User I/O pin (global) |
| ピン 7 | I/O — User I/O pin (global) |
| ピン 8 | I/O — User I/O pin (global) |
| ピン 9 | I/O — User I/O pin (global) |
| ピン 10 | I/O — User I/O pin (global) |
| ピン 11 | GND — Ground |
| ピン 12 | I/O — User I/O pin (global) |
| ピン 13 | I/O — User I/O pin (global) |
| ピン 14 | I/O — User I/O pin (global) |
| ピン 15 | I/O — User I/O pin (global) |
| ピン 16 | I/O — User I/O pin (global) |
| ピン 17 | I/O — User I/O pin (global) |
| ピン 18 | I/O — User I/O pin (global) |
| ピン 19 | I/O — User I/O pin (global) |
| ピン 20 | I/O — User I/O pin (global) |
| ピン 21 | I/O — User I/O pin (global) |
| ピン 22 | I/O — User I/O pin (global) |
| ピン 23 | I/O — User I/O pin (global) |
| ピン 24 | I/O — User I/O pin (global) |
| ピン 25 | I/O — User I/O pin (global) |
| ピン 26 | I/O — User I/O pin (global) |
| ピン 27 | I/O — User I/O pin (global) |
| ピン 28 | I/O — User I/O pin (global) |
| ピン 29 | I/O — User I/O pin (global) |
| ピン 30 | I/O — User I/O pin (global) |
| ピン 31 | I/O — User I/O pin (global) |
| ピン 32 | I/O — User I/O pin (global) |
| ピン 33 | I/O — User I/O pin (global) |
| ピン 34 | I/O — User I/O pin (global) |
| ピン 35 | I/O — User I/O pin (global) |
| ピン 36 | I/O — User I/O pin (global) |
| ピン 37 | I/O — User I/O pin (global) |
| ピン 38 | I/O — User I/O pin (global) |
| ピン 39 | I/O — User I/O pin (global) |
| ピン 40 | I/O — User I/O pin (global) |
| ピン 41 | I/O — User I/O pin (global) |
| ピン 42 | I/O — User I/O pin (global) |
| ピン 43 | I/O — User I/O pin (global) |
| ピン 44 | I/O — User I/O pin (global) |
| ピン 45 | I/O — User I/O pin (global) |
| ピン 46 | I/O — User I/O pin (global) |
| ピン 47 | I/O — User I/O pin (global) |
| ピン 48 | I/O — User I/O pin (global) |
| ピン 49 | I/O — User I/O pin (global) |
| ピン 50 | I/O — User I/O pin (global) |
| ピン 51 | I/O — User I/O pin (global) |
| ピン 52 | I/O — User I/O pin (global) |
| ピン 53 | GND — Ground |
| ピン 54 | I/O — User I/O pin (global) |
| ピン 55 | I/O — User I/O pin (global) |
| ピン 56 | I/O — User I/O pin (global) |
| ピン 57 | I/O — User I/O pin (global) |
| ピン 58 | I/O — User I/O pin (global) |
| ピン 59 | I/O — User I/O pin (global) |
| ピン 60 | I/O — User I/O pin (global) |
| ピン 61 | I/O — User I/O pin (global) |
| ピン 62 | I/O — User I/O pin (global) |
| ピン 63 | I/O — User I/O pin (global) |
| ピン 64 | I/O — User I/O pin (global) |
| ピン 65 | I/O — User I/O pin (global) |
| ピン 66 | I/O — User I/O pin (global) |
| ピン 67 | I/O — User I/O pin (global) |
| ピン 68 | I/O — User I/O pin (global) |
| ピン 69 | I/O — User I/O pin (global) |
| ピン 70 | I/O — User I/O pin (global) |
| ピン 71 | I/O — User I/O pin (global) |
| ピン 72 | I/O — User I/O pin (global) |
| ピン 73 | I/O — User I/O pin (global) |
| ピン 74 | I/O — User I/O pin (global) |
| ピン 75 | I/O — User I/O pin (global) |
| ピン 76 | I/O — User I/O pin (global) |
| ピン 77 | I/O — User I/O pin (global) |
| ピン 78 | I/O — User I/O pin (global) |
| ピン 79 | I/O — User I/O pin (global) |
| ピン 80 | I/O — User I/O pin (global) |
| ピン 81 | I/O — User I/O pin (global) |
| ピン 82 | I/O — User I/O pin (global) |
| ピン 83 | I/O — User I/O pin (global) |
| ピン 84 | I/O — User I/O pin (global) |
| ピン 85 | I/O — User I/O pin (global) |
| ピン 86 | I/O — User I/O pin (global) |
| ピン 87 | I/O — User I/O pin (global) |
| ピン 88 | I/O — User I/O pin (global) |
| ピン 89 | I/O — User I/O pin (global) |
| ピン 90 | I/O — User I/O pin (global) |
| ピン 91 | I/O — User I/O pin (global) |
| ピン 92 | I/O — User I/O pin (global) |
| ピン 93 | I/O — User I/O pin (global) |
| ピン 94 | I/O — User I/O pin (global) |
| ピン 95 | I/O — User I/O pin (global) |
| ピン 96 | I/O — User I/O pin (global) |
| ピン 97 | GND — Ground |
| ピン 98 | I/O — User I/O pin (global) |
| ピン 99 | I/O — User I/O pin (global) |
| ピン 100 | I/O — User I/O pin (global) |
| ピン 101 | I/O — User I/O pin (global) |
| ピン 102 | I/O — User I/O pin (global) |
| ピン 103 | I/O — User I/O pin (global) |
| ピン 104 | I/O — User I/O pin (global) |
| ピン 105 | I/O — User I/O pin (global) |
| ピン 106 | I/O — User I/O pin (global) |
| ピン 107 | I/O — User I/O pin (global) |
| ピン 108 | I/O — User I/O pin (global) |
| ピン 109 | I/O — User I/O pin (global) |
| ピン 110 | I/O — User I/O pin (global) |
| ピン 111 | I/O — User I/O pin (global) |
| ピン 112 | I/O — User I/O pin (global) |
| ピン 113 | I/O — User I/O pin (global) |
| ピン 114 | I/O — User I/O pin (global) |
| ピン 115 | I/O — User I/O pin (global) |
| ピン 116 | I/O — User I/O pin (global) |
| ピン 117 | I/O — User I/O pin (global) |
| ピン 118 | I/O — User I/O pin (global) |
| ピン 119 | I/O — User I/O pin (global) |
| ピン 120 | I/O — User I/O pin (global) |
| ピン 121 | I/O — User I/O pin (global) |
| ピン 122 | I/O — User I/O pin (global) |
| ピン 123 | I/O — User I/O pin (global) |
| ピン 124 | I/O — User I/O pin (global) |
| ピン 125 | I/O — User I/O pin (global) |
| ピン 126 | I/O — User I/O pin (global) |
| ピン 127 | I/O — User I/O pin (global) |
| ピン 128 | I/O — User I/O pin (global) |
| ピン 129 | I/O — User I/O pin (global) |
| ピン 130 | I/O — User I/O pin (global) |
| ピン 131 | I/O — User I/O pin (global) |
| ピン 132 | I/O — User I/O pin (global) |
| ピン 133 | I/O — User I/O pin (global) |
| ピン 134 | I/O — User I/O pin (global) |
| ピン 135 | I/O — User I/O pin (global) |
| ピン 136 | I/O — User I/O pin (global) |
| ピン 137 | GND — Ground |
| ピン 138 | I/O — User I/O pin (global) |
| ピン 139 | I/O — User I/O pin (global) |
| ピン 140 | I/O — User I/O pin (global) |
| ピン 141 | I/O — User I/O pin (global) |
| ピン 142 | I/O — User I/O pin (global) |
| ピン 143 | I/O — User I/O pin (global) |
| ピン 144 | I/O — User I/O pin (global) |
| ピン 145 | I/O — User I/O pin (global) |
| ピン 146 | I/O — User I/O pin (global) |
| ピン 147 | I/O — User I/O pin (global) |
| ピン 148 | I/O — User I/O pin (global) |
| ピン 149 | I/O — User I/O pin (global) |
| ピン 150 | I/O — User I/O pin (global) |
| ピン 151 | I/O — User I/O pin (global) |
| ピン 152 | I/O — User I/O pin (global) |
| ピン 153 | I/O — User I/O pin (global) |
| ピン 154 | I/O — User I/O pin (global) |
| ピン 155 | I/O — User I/O pin (global) |
| ピン 156 | I/O — User I/O pin (global) |
| ピン 157 | I/O — User I/O pin (global) |
| ピン 158 | I/O — User I/O pin (global) |
| ピン 159 | I/O — User I/O pin (global) |
| ピン 160 | I/O — User I/O pin (global) |
| ピン 161 | I/O — User I/O pin (global) |
| ピン 162 | I/O — User I/O pin (global) |
| ピン 163 | I/O — User I/O pin (global) |
| ピン 164 | I/O — User I/O pin (global) |
| ピン 165 | I/O — User I/O pin (global) |
| ピン 166 | I/O — User I/O pin (global) |
| ピン 167 | I/O — User I/O pin (global) |
| ピン 168 | I/O — User I/O pin (global) |
| ピン 169 | I/O — User I/O pin (global) |
| ピン 170 | I/O — User I/O pin (global) |
| ピン 171 | I/O — User I/O pin (global) |
| ピン 172 | I/O — User I/O pin (global) |
| ピン 173 | I/O — User I/O pin (global) |
| ピン 174 | I/O — User I/O pin (global) |
| ピン 175 | I/O — User I/O pin (global) |
| ピン 176 | I/O — User I/O pin (global) |
| ピン 177 | I/O — User I/O pin (global) |
| ピン 178 | I/O — User I/O pin (global) |
| ピン 179 | I/O — User I/O pin (global) |
| ピン 180 | I/O — User I/O pin (global) |
| ピン 181 | TDI — JTAG Test Data In |
| ピン 182 | TMS — JTAG Test Mode Select |
| ピン 183 | TCK — JTAG Test Clock |
| ピン 184 | NC — Not connected (per datasheet) |
| ピン 185 | VCC — 3.3 V supply |
| ピン 186 | GND — Ground |
| ピン 187 | I/O — User I/O pin (global) |
| ピン 188 | I/O — User I/O pin (global) |
| ピン 189 | I/O — User I/O pin (global) |
| ピン 190 | I/O — User I/O pin (global) |
| ピン 191 | I/O — User I/O pin (global) |
| ピン 192 | I/O — User I/O pin (global) |
| ピン 193 | I/O — User I/O pin (global) |
| ピン 194 | I/O — User I/O pin (global) |
| ピン 195 | I/O — User I/O pin (global) |
| ピン 196 | I/O — User I/O pin (global) |
| ピン 197 | I/O — User I/O pin (global) |
| ピン 198 | I/O — User I/O pin (global) |
| ピン 199 | I/O — User I/O pin (global) |
| ピン 200 | I/O — User I/O pin (global) |
| ピン 201 | I/O — User I/O pin (global) |
| ピン 202 | I/O — User I/O pin (global) |
| ピン 203 | I/O — User I/O pin (global) |
| ピン 204 | I/O — User I/O pin (global) |
| ピン 205 | TDO — JTAG Test Data Out |
| ピン 206 | NC — Not connected (per datasheet) |
| ピン 207 | VCC — 3.3 V supply |
| ピン 208 | GND — Ground |
主な用途
EPM7256AEQC208-5N の用途: 6 件s: Bus Interface Bridging, Industrial Glue Logic Consolidation, Peripheral I/O Expansion, Telecom Line-Card Control Logic, State-Machine and Control Sequencer, Legacy Board Repair and Spare-Part Replacement.
Bus Interface Bridging
The EPM7256AEQC208-5N is well suited to bridge mismatched bus protocols (PCI-to-ISA, VME-to-PCI, ISA-to-LPC) because its 256 macrocells and 164 I/Os can absorb up to 96 simultaneous bus signals with 5.5 ns pin-to-pin delay. The 3.3 V core matches modern 32-bit bus transceivers while the JTAG-ISP interface enables post-assembly protocol fixes. Unlike discrete 74-series glue logic, the MAX 7000A reduces 6-8 SSI/MSI packages to a single device, cutting board area by 60 percent. Designers should allocate two LABs per 8-bit bus path and reserve one macrocell for a registered parity or wait-state generator.
おすすめ
Industrial Glue Logic Consolidation
The EPM7256AEQC208-5N replaces entire boards of legacy 74LS/74HC glue logic with a single device, ideal for PLC backplanes, motor-control signal conditioning, and industrial sensor aggregators. The 5,000 usable gates handle 32-channel discrete I/O muxing with 16-bit debounce counters and HMI keypad scanners. EEPROM-based configuration retains the bitstream through brown-outs without external boot memory, a major reliability advantage over SRAM FPGAs in factory-floor environments. Designers should add 10 kohm pull-ups on JTAG pins and a 0.1 uF + 10 uF decoupling capacitor pair per VCC/ GND pair.
おすすめ
Peripheral I/O Expansion
The EPM7256AEQC208-5N expands a microcontroller's GPIO by exposing 164 programmable I/Os with individually configurable pull-ups, slew rate, and 3.3 V/5 V-tolerant inputs. Designers implement PWM generators, quadrature decoders, and 7-segment LED/LCD multiplexers entirely in hardware, offloading the host MCU for real-time tasks. The 5.5 ns propagation delay supports SPI master implementations at up to 80 MHz, doubling the throughput of bit-banged MCU peripherals. The device's commercial 0 C to +70 C rating is sufficient for indoor control cabinets.
おすすめ
Telecom Line-Card Control Logic
The EPM7256AEQC208-5N is widely deployed in legacy T1/E1 and DSLAM line cards for alarm aggregation, scan-matrix control, and serializer/deserializer glue logic. Its 16 dedicated inputs handle clock and framing signals while the 164 I/Os drive up to 24 E1 ports worth of HDLC controllers. The non-volatile EEPROM bitstream survives line-card hot-swap events, eliminating the 100 ms boot delay typical of SRAM-based FPGAs. Designers use the JTAG chain to test the entire backplane at once, simplifying factory burn-in and field diagnostics.
おすすめ
State-Machine and Control Sequencer
The EPM7256AEQC208-5N implements complex Moore/Mealy state machines with up to 64 states per macrocell group, ideal for test-equipment sequencers, instrumentation handlers, and motor-control state machines. The product-term allocator maps sparse state encodings efficiently, reducing macrocell count by 20-30 percent versus fixed-OR CPLDs. A typical 32-state sequencer fits in fewer than 64 macrocells, leaving the remaining 192 macrocells free for parallel datapath arithmetic. Designers should use synchronous design rules to avoid glitches on registered outputs.
おすすめ
Legacy Board Repair and Spare-Part Replacement
The EPM7256AEQC208-5N is a drop-in spare for repairing EOL Altera MAX 7000A line cards, medical imaging backplanes, and military communication equipment still in service. Its PQFP-208 footprint and JTAG interface match the original design files, allowing engineers to clone legacy bitstreams using a USB-Blaster and Quartus II v9.1. Secondary-market inventory through authorized brokers is typically traceable and factory-tested, mitigating counterfeit risk. Designers should re-verify timing margins because the -5 speed grade may differ from the original -7 or -10 grade deployed in the unit.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: EPM7256AEQC208-5N — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | EPM7256AEQC208-10N | EPM7256AEQC208-7N | EPM7256AEFI256-7 | EPM7256AEFC256-5N |
|---|---|---|---|---|---|
| Package | 208-pin PQFP | 208-pin PQFP - same | 208-pin PQFP - same | 256-pin FBGA - different | 256-pin FBGA - different |
| Brand | Altera / Intel | Altera / Intel | Altera / Intel | Altera / Intel | Altera / Intel |
| Macrocells | 256 | 256 | 256 | 256 | 256 |
| User I/Os | 164 | 164 | 164 | 164 | 164 |
| Pin-to-Pin Delay (tPD) | 5.5 ns | 10 ns | 7.5 ns | 7.5 ns | 5.5 ns |
| Maximum Internal Frequency | 172.4 MHz | ~125 MHz | ~150 MHz | 150 MHz | 172.4 MHz |
| Supply Voltage | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 3.3 V |
| Operating Temperature | 0 C to +70 C | 0 C to +70 C | 0 C to +70 C | -40 C to +85 C (industrial) | 0 C to +70 C |
| Footprint Compatibility | PQFP-208 baseline | Drop-in (same PQFP-208) | Drop-in (same PQFP-208) | Cross-package (256-FBGA) | Cross-package (256-FBGA) |
主な差別化要因
- Higher speed grade within the same PQFP-208 footprint （vs EPM7256AEQC208-10N)
- Highest commercial-temperature speed grade in PQFP-208 （vs EPM7256AEQC208-7N)
- Mature EEPROM bitstream retention for instant-on systems （vs EPM7256AEFI256-7)
設計ノート
The EPM7256AEQC208-5N draws approximately 250-400 mA from the 3.3 V VCCINT rail under typical 50-75 percent utilization, per the MAX 7000A power calculator. Add a 100 uF bulk tantalum plus 0.1 uF and 10 uF ceramic decoupling within 5 mm of each VCC pin (185, 207). Place the bulk capacitor on the same side as the device to minimize loop inductance. The 5 V-tolerant inputs do not require a separate 5 V supply but observe absolute maximum ratings of 7 V on any I/O pin.
The PQFP-208 package uses 0.5 mm lead pitch and demands IPC-7351 land patterns with 0.30 mm pad width. Use a 4-layer PCB with dedicated VCC and GND planes to ensure clean power delivery to all 16 LABs. Recommended stack-up: signal / GND / VCC / signal. Leave 2 mm of copper pour around the device thermal land to spread heat, although commercial-grade (-5N) thermal dissipation is rarely a limiting factor in lab environments.
Estimated: When migrating from the legacy 5 V MAX 7000 (EPM7256QC208) to the 3.3 V MAX 7000A (EPM7256AEQC208-5N), designers must reconfigure the VCC rail from 5 V to 3.3 V - applying 5 V will permanently damage the device. Also note that bitstreams compiled for the legacy MAX 7000 are NOT compatible with the MAX 7000A; recompile using Quartus II 9.1 or later. Always re-verify timing closure because the -5 speed grade is faster than the legacy -7 grade.
コンプライアンス情報
Lead-free ('N' suffix) per Altera part numbering convention. RoHS, REACH, halogen-free, and conflict-mineral status not stated in the verified web data; consult factory certificate of conformance before RoHS-critical placements.