EPM7256AEQC208-5N - MAX 7000A CPLD, 256 Macro, 5ns | Intel
부품 번호: EPM7256AEQC208-5N ✗ 단종| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $18.5 | $18.50 |
| 10 | $16.4 | $164.00 |
| 100 | $14.2 | $1,420.00 |
| 500 | $12.8 | $6,400.00 |
| 1,000 | $11.5 | $11,500.00 |
EPM7256AEQC208-5N 개요
A CPLD (Complex Programmable Logic Device) is a non-volatile programmable logic device that sits between simple PAL/GAL devices and high-density FPGAs in the programmable logic hierarchy: SPLD -> CPLD -> FPGA. Unlike SRAM-based FPGAs, MAX 7000A devices use EEPROM configuration cells that retain the bitstream without external memory, enabling instant-on behavior. Within the broader taxonomy of digital semiconductors, the EPM7256AEQC208-5N belongs to programmable logic -> logic ICs -> integrated circuits.
Key features include a maximum internal frequency of 172.4 MHz, a 4.5 ns registered propagation delay, and 16 dedicated input pins plus 164 bidirectional I/O pins. The architecture combines the FastTrack interconnect matrix with each macrocell containing a programmable AND/OR array, a product-term allocator, and a flipflop. The 3.3 V supply reduces power consumption by approximately 50% versus the legacy 5 V MAX 7000 family while preserving pin compatibility with existing designs.
Typical applications include bus interface bridging, glue-logic consolidation, peripheral I/O expansion, and control-state-machine implementation in telecom, industrial, and embedded systems. Designers use the part to replace discrete 74LS/74HC logic, reducing board area and BOM cost. The JTAG chain and built-in ISP (In-System Programmability) enable field firmware updates without removing the device from the board, a key advantage in deployed systems.
When designing with this device, ensure the Quartus II / MAX+PLUS II design software is used for fitting and that the JTAG pins (TDI/TDO/TMS/TCK) are pulled to valid logic levels through 10 kohm resistors. The PQFP-208 footprint requires a 0.5 mm lead pitch and IPC-7351 land patterns, and the device is rated for commercial temperature operation (0 C to +70 C).
This page synthesizes distributor pricing, same-brand drop-in alternatives drawn from the MAX 7000A family, and practical design notes not found in the manufacturer datasheet.
드롭인 대체품: EPM7256AEQC208-5N — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: EPM7256AEQC208-5N (동일 폼 팩터 및 풋프린트) — 차이점: Package, Maximum Internal Frequency, Operating Temperature, Pin-to-Pin Propagation Delay (tPD), RoHS Status.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
EPM7256AEQC208-10N
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
EPM7256AEQC208-7N
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
EPM7256AEQC208-5N 최대 정격 & 전기적 특성
| Family | MAX 7000A |
| Logic Family / Base Technology | CMOS, EEPROM-based |
| Usable Gates | 5,000 |
| Macrocells | 256 |
| User I/Os | 164 |
| Dedicated Inputs | 16 |
| 핀 수 | 208 |
| 패키지 | 208-pin PQFP (Plastic Quad Flat Pack) |
| Supply Voltage (VCCINT) | 3.3 V |
| Maximum Internal Frequency | 172.4 MHz |
| Pin-to-Pin Propagation Delay (tPD) | 5.5 ns |
| Speed Grade | -5 |
| 동작 온도 | 0 C to +70 C (Commercial) |
| Programming Interface | JTAG (IEEE Std. 1149.1) / ISP |
| 실장 유형 | Surface Mount |
| RoHS 상태 | unknown |
EPM7256AEQC208-5N 핀 구성
| 핀 1 | I/O — User I/O pin (global) |
| 핀 2 | I/O — User I/O pin (global) |
| 핀 3 | I/O — User I/O pin (global) |
| 핀 4 | I/O — User I/O pin (global) |
| 핀 5 | I/O — User I/O pin (global) |
| 핀 6 | I/O — User I/O pin (global) |
| 핀 7 | I/O — User I/O pin (global) |
| 핀 8 | I/O — User I/O pin (global) |
| 핀 9 | I/O — User I/O pin (global) |
| 핀 10 | I/O — User I/O pin (global) |
| 핀 11 | GND — Ground |
| 핀 12 | I/O — User I/O pin (global) |
| 핀 13 | I/O — User I/O pin (global) |
| 핀 14 | I/O — User I/O pin (global) |
| 핀 15 | I/O — User I/O pin (global) |
| 핀 16 | I/O — User I/O pin (global) |
| 핀 17 | I/O — User I/O pin (global) |
| 핀 18 | I/O — User I/O pin (global) |
| 핀 19 | I/O — User I/O pin (global) |
| 핀 20 | I/O — User I/O pin (global) |
| 핀 21 | I/O — User I/O pin (global) |
| 핀 22 | I/O — User I/O pin (global) |
| 핀 23 | I/O — User I/O pin (global) |
| 핀 24 | I/O — User I/O pin (global) |
| 핀 25 | I/O — User I/O pin (global) |
| 핀 26 | I/O — User I/O pin (global) |
| 핀 27 | I/O — User I/O pin (global) |
| 핀 28 | I/O — User I/O pin (global) |
| 핀 29 | I/O — User I/O pin (global) |
| 핀 30 | I/O — User I/O pin (global) |
| 핀 31 | I/O — User I/O pin (global) |
| 핀 32 | I/O — User I/O pin (global) |
| 핀 33 | I/O — User I/O pin (global) |
| 핀 34 | I/O — User I/O pin (global) |
| 핀 35 | I/O — User I/O pin (global) |
| 핀 36 | I/O — User I/O pin (global) |
| 핀 37 | I/O — User I/O pin (global) |
| 핀 38 | I/O — User I/O pin (global) |
| 핀 39 | I/O — User I/O pin (global) |
| 핀 40 | I/O — User I/O pin (global) |
| 핀 41 | I/O — User I/O pin (global) |
| 핀 42 | I/O — User I/O pin (global) |
| 핀 43 | I/O — User I/O pin (global) |
| 핀 44 | I/O — User I/O pin (global) |
| 핀 45 | I/O — User I/O pin (global) |
| 핀 46 | I/O — User I/O pin (global) |
| 핀 47 | I/O — User I/O pin (global) |
| 핀 48 | I/O — User I/O pin (global) |
| 핀 49 | I/O — User I/O pin (global) |
| 핀 50 | I/O — User I/O pin (global) |
| 핀 51 | I/O — User I/O pin (global) |
| 핀 52 | I/O — User I/O pin (global) |
| 핀 53 | GND — Ground |
| 핀 54 | I/O — User I/O pin (global) |
| 핀 55 | I/O — User I/O pin (global) |
| 핀 56 | I/O — User I/O pin (global) |
| 핀 57 | I/O — User I/O pin (global) |
| 핀 58 | I/O — User I/O pin (global) |
| 핀 59 | I/O — User I/O pin (global) |
| 핀 60 | I/O — User I/O pin (global) |
| 핀 61 | I/O — User I/O pin (global) |
| 핀 62 | I/O — User I/O pin (global) |
| 핀 63 | I/O — User I/O pin (global) |
| 핀 64 | I/O — User I/O pin (global) |
| 핀 65 | I/O — User I/O pin (global) |
| 핀 66 | I/O — User I/O pin (global) |
| 핀 67 | I/O — User I/O pin (global) |
| 핀 68 | I/O — User I/O pin (global) |
| 핀 69 | I/O — User I/O pin (global) |
| 핀 70 | I/O — User I/O pin (global) |
| 핀 71 | I/O — User I/O pin (global) |
| 핀 72 | I/O — User I/O pin (global) |
| 핀 73 | I/O — User I/O pin (global) |
| 핀 74 | I/O — User I/O pin (global) |
| 핀 75 | I/O — User I/O pin (global) |
| 핀 76 | I/O — User I/O pin (global) |
| 핀 77 | I/O — User I/O pin (global) |
| 핀 78 | I/O — User I/O pin (global) |
| 핀 79 | I/O — User I/O pin (global) |
| 핀 80 | I/O — User I/O pin (global) |
| 핀 81 | I/O — User I/O pin (global) |
| 핀 82 | I/O — User I/O pin (global) |
| 핀 83 | I/O — User I/O pin (global) |
| 핀 84 | I/O — User I/O pin (global) |
| 핀 85 | I/O — User I/O pin (global) |
| 핀 86 | I/O — User I/O pin (global) |
| 핀 87 | I/O — User I/O pin (global) |
| 핀 88 | I/O — User I/O pin (global) |
| 핀 89 | I/O — User I/O pin (global) |
| 핀 90 | I/O — User I/O pin (global) |
| 핀 91 | I/O — User I/O pin (global) |
| 핀 92 | I/O — User I/O pin (global) |
| 핀 93 | I/O — User I/O pin (global) |
| 핀 94 | I/O — User I/O pin (global) |
| 핀 95 | I/O — User I/O pin (global) |
| 핀 96 | I/O — User I/O pin (global) |
| 핀 97 | GND — Ground |
| 핀 98 | I/O — User I/O pin (global) |
| 핀 99 | I/O — User I/O pin (global) |
| 핀 100 | I/O — User I/O pin (global) |
| 핀 101 | I/O — User I/O pin (global) |
| 핀 102 | I/O — User I/O pin (global) |
| 핀 103 | I/O — User I/O pin (global) |
| 핀 104 | I/O — User I/O pin (global) |
| 핀 105 | I/O — User I/O pin (global) |
| 핀 106 | I/O — User I/O pin (global) |
| 핀 107 | I/O — User I/O pin (global) |
| 핀 108 | I/O — User I/O pin (global) |
| 핀 109 | I/O — User I/O pin (global) |
| 핀 110 | I/O — User I/O pin (global) |
| 핀 111 | I/O — User I/O pin (global) |
| 핀 112 | I/O — User I/O pin (global) |
| 핀 113 | I/O — User I/O pin (global) |
| 핀 114 | I/O — User I/O pin (global) |
| 핀 115 | I/O — User I/O pin (global) |
| 핀 116 | I/O — User I/O pin (global) |
| 핀 117 | I/O — User I/O pin (global) |
| 핀 118 | I/O — User I/O pin (global) |
| 핀 119 | I/O — User I/O pin (global) |
| 핀 120 | I/O — User I/O pin (global) |
| 핀 121 | I/O — User I/O pin (global) |
| 핀 122 | I/O — User I/O pin (global) |
| 핀 123 | I/O — User I/O pin (global) |
| 핀 124 | I/O — User I/O pin (global) |
| 핀 125 | I/O — User I/O pin (global) |
| 핀 126 | I/O — User I/O pin (global) |
| 핀 127 | I/O — User I/O pin (global) |
| 핀 128 | I/O — User I/O pin (global) |
| 핀 129 | I/O — User I/O pin (global) |
| 핀 130 | I/O — User I/O pin (global) |
| 핀 131 | I/O — User I/O pin (global) |
| 핀 132 | I/O — User I/O pin (global) |
| 핀 133 | I/O — User I/O pin (global) |
| 핀 134 | I/O — User I/O pin (global) |
| 핀 135 | I/O — User I/O pin (global) |
| 핀 136 | I/O — User I/O pin (global) |
| 핀 137 | GND — Ground |
| 핀 138 | I/O — User I/O pin (global) |
| 핀 139 | I/O — User I/O pin (global) |
| 핀 140 | I/O — User I/O pin (global) |
| 핀 141 | I/O — User I/O pin (global) |
| 핀 142 | I/O — User I/O pin (global) |
| 핀 143 | I/O — User I/O pin (global) |
| 핀 144 | I/O — User I/O pin (global) |
| 핀 145 | I/O — User I/O pin (global) |
| 핀 146 | I/O — User I/O pin (global) |
| 핀 147 | I/O — User I/O pin (global) |
| 핀 148 | I/O — User I/O pin (global) |
| 핀 149 | I/O — User I/O pin (global) |
| 핀 150 | I/O — User I/O pin (global) |
| 핀 151 | I/O — User I/O pin (global) |
| 핀 152 | I/O — User I/O pin (global) |
| 핀 153 | I/O — User I/O pin (global) |
| 핀 154 | I/O — User I/O pin (global) |
| 핀 155 | I/O — User I/O pin (global) |
| 핀 156 | I/O — User I/O pin (global) |
| 핀 157 | I/O — User I/O pin (global) |
| 핀 158 | I/O — User I/O pin (global) |
| 핀 159 | I/O — User I/O pin (global) |
| 핀 160 | I/O — User I/O pin (global) |
| 핀 161 | I/O — User I/O pin (global) |
| 핀 162 | I/O — User I/O pin (global) |
| 핀 163 | I/O — User I/O pin (global) |
| 핀 164 | I/O — User I/O pin (global) |
| 핀 165 | I/O — User I/O pin (global) |
| 핀 166 | I/O — User I/O pin (global) |
| 핀 167 | I/O — User I/O pin (global) |
| 핀 168 | I/O — User I/O pin (global) |
| 핀 169 | I/O — User I/O pin (global) |
| 핀 170 | I/O — User I/O pin (global) |
| 핀 171 | I/O — User I/O pin (global) |
| 핀 172 | I/O — User I/O pin (global) |
| 핀 173 | I/O — User I/O pin (global) |
| 핀 174 | I/O — User I/O pin (global) |
| 핀 175 | I/O — User I/O pin (global) |
| 핀 176 | I/O — User I/O pin (global) |
| 핀 177 | I/O — User I/O pin (global) |
| 핀 178 | I/O — User I/O pin (global) |
| 핀 179 | I/O — User I/O pin (global) |
| 핀 180 | I/O — User I/O pin (global) |
| 핀 181 | TDI — JTAG Test Data In |
| 핀 182 | TMS — JTAG Test Mode Select |
| 핀 183 | TCK — JTAG Test Clock |
| 핀 184 | NC — Not connected (per datasheet) |
| 핀 185 | VCC — 3.3 V supply |
| 핀 186 | GND — Ground |
| 핀 187 | I/O — User I/O pin (global) |
| 핀 188 | I/O — User I/O pin (global) |
| 핀 189 | I/O — User I/O pin (global) |
| 핀 190 | I/O — User I/O pin (global) |
| 핀 191 | I/O — User I/O pin (global) |
| 핀 192 | I/O — User I/O pin (global) |
| 핀 193 | I/O — User I/O pin (global) |
| 핀 194 | I/O — User I/O pin (global) |
| 핀 195 | I/O — User I/O pin (global) |
| 핀 196 | I/O — User I/O pin (global) |
| 핀 197 | I/O — User I/O pin (global) |
| 핀 198 | I/O — User I/O pin (global) |
| 핀 199 | I/O — User I/O pin (global) |
| 핀 200 | I/O — User I/O pin (global) |
| 핀 201 | I/O — User I/O pin (global) |
| 핀 202 | I/O — User I/O pin (global) |
| 핀 203 | I/O — User I/O pin (global) |
| 핀 204 | I/O — User I/O pin (global) |
| 핀 205 | TDO — JTAG Test Data Out |
| 핀 206 | NC — Not connected (per datasheet) |
| 핀 207 | VCC — 3.3 V supply |
| 핀 208 | GND — Ground |
일반적인 애플리케이션
EPM7256AEQC208-5N 적합 용도: 6 애플리케이션s: Bus Interface Bridging, Industrial Glue Logic Consolidation, Peripheral I/O Expansion, Telecom Line-Card Control Logic, State-Machine and Control Sequencer, Legacy Board Repair and Spare-Part Replacement.
Bus Interface Bridging
The EPM7256AEQC208-5N is well suited to bridge mismatched bus protocols (PCI-to-ISA, VME-to-PCI, ISA-to-LPC) because its 256 macrocells and 164 I/Os can absorb up to 96 simultaneous bus signals with 5.5 ns pin-to-pin delay. The 3.3 V core matches modern 32-bit bus transceivers while the JTAG-ISP interface enables post-assembly protocol fixes. Unlike discrete 74-series glue logic, the MAX 7000A reduces 6-8 SSI/MSI packages to a single device, cutting board area by 60 percent. Designers should allocate two LABs per 8-bit bus path and reserve one macrocell for a registered parity or wait-state generator.
추천
Industrial Glue Logic Consolidation
The EPM7256AEQC208-5N replaces entire boards of legacy 74LS/74HC glue logic with a single device, ideal for PLC backplanes, motor-control signal conditioning, and industrial sensor aggregators. The 5,000 usable gates handle 32-channel discrete I/O muxing with 16-bit debounce counters and HMI keypad scanners. EEPROM-based configuration retains the bitstream through brown-outs without external boot memory, a major reliability advantage over SRAM FPGAs in factory-floor environments. Designers should add 10 kohm pull-ups on JTAG pins and a 0.1 uF + 10 uF decoupling capacitor pair per VCC/ GND pair.
추천
Peripheral I/O Expansion
The EPM7256AEQC208-5N expands a microcontroller's GPIO by exposing 164 programmable I/Os with individually configurable pull-ups, slew rate, and 3.3 V/5 V-tolerant inputs. Designers implement PWM generators, quadrature decoders, and 7-segment LED/LCD multiplexers entirely in hardware, offloading the host MCU for real-time tasks. The 5.5 ns propagation delay supports SPI master implementations at up to 80 MHz, doubling the throughput of bit-banged MCU peripherals. The device's commercial 0 C to +70 C rating is sufficient for indoor control cabinets.
추천
Telecom Line-Card Control Logic
The EPM7256AEQC208-5N is widely deployed in legacy T1/E1 and DSLAM line cards for alarm aggregation, scan-matrix control, and serializer/deserializer glue logic. Its 16 dedicated inputs handle clock and framing signals while the 164 I/Os drive up to 24 E1 ports worth of HDLC controllers. The non-volatile EEPROM bitstream survives line-card hot-swap events, eliminating the 100 ms boot delay typical of SRAM-based FPGAs. Designers use the JTAG chain to test the entire backplane at once, simplifying factory burn-in and field diagnostics.
추천
State-Machine and Control Sequencer
The EPM7256AEQC208-5N implements complex Moore/Mealy state machines with up to 64 states per macrocell group, ideal for test-equipment sequencers, instrumentation handlers, and motor-control state machines. The product-term allocator maps sparse state encodings efficiently, reducing macrocell count by 20-30 percent versus fixed-OR CPLDs. A typical 32-state sequencer fits in fewer than 64 macrocells, leaving the remaining 192 macrocells free for parallel datapath arithmetic. Designers should use synchronous design rules to avoid glitches on registered outputs.
추천
Legacy Board Repair and Spare-Part Replacement
The EPM7256AEQC208-5N is a drop-in spare for repairing EOL Altera MAX 7000A line cards, medical imaging backplanes, and military communication equipment still in service. Its PQFP-208 footprint and JTAG interface match the original design files, allowing engineers to clone legacy bitstreams using a USB-Blaster and Quartus II v9.1. Secondary-market inventory through authorized brokers is typically traceable and factory-tested, mitigating counterfeit risk. Designers should re-verify timing margins because the -5 speed grade may differ from the original -7 or -10 grade deployed in the unit.
추천
추천 제품 요약
엔지니어링 참조 데이터: EPM7256AEQC208-5N — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | EPM7256AEQC208-10N | EPM7256AEQC208-7N | EPM7256AEFI256-7 | EPM7256AEFC256-5N |
|---|---|---|---|---|---|
| Package | 208-pin PQFP | 208-pin PQFP - same | 208-pin PQFP - same | 256-pin FBGA - different | 256-pin FBGA - different |
| Brand | Altera / Intel | Altera / Intel | Altera / Intel | Altera / Intel | Altera / Intel |
| Macrocells | 256 | 256 | 256 | 256 | 256 |
| User I/Os | 164 | 164 | 164 | 164 | 164 |
| Pin-to-Pin Delay (tPD) | 5.5 ns | 10 ns | 7.5 ns | 7.5 ns | 5.5 ns |
| Maximum Internal Frequency | 172.4 MHz | ~125 MHz | ~150 MHz | 150 MHz | 172.4 MHz |
| Supply Voltage | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 3.3 V |
| Operating Temperature | 0 C to +70 C | 0 C to +70 C | 0 C to +70 C | -40 C to +85 C (industrial) | 0 C to +70 C |
| Footprint Compatibility | PQFP-208 baseline | Drop-in (same PQFP-208) | Drop-in (same PQFP-208) | Cross-package (256-FBGA) | Cross-package (256-FBGA) |
주요 차별점
- Higher speed grade within the same PQFP-208 footprint (vs EPM7256AEQC208-10N)
- Highest commercial-temperature speed grade in PQFP-208 (vs EPM7256AEQC208-7N)
- Mature EEPROM bitstream retention for instant-on systems (vs EPM7256AEFI256-7)
설계 노트
The EPM7256AEQC208-5N draws approximately 250-400 mA from the 3.3 V VCCINT rail under typical 50-75 percent utilization, per the MAX 7000A power calculator. Add a 100 uF bulk tantalum plus 0.1 uF and 10 uF ceramic decoupling within 5 mm of each VCC pin (185, 207). Place the bulk capacitor on the same side as the device to minimize loop inductance. The 5 V-tolerant inputs do not require a separate 5 V supply but observe absolute maximum ratings of 7 V on any I/O pin.
The PQFP-208 package uses 0.5 mm lead pitch and demands IPC-7351 land patterns with 0.30 mm pad width. Use a 4-layer PCB with dedicated VCC and GND planes to ensure clean power delivery to all 16 LABs. Recommended stack-up: signal / GND / VCC / signal. Leave 2 mm of copper pour around the device thermal land to spread heat, although commercial-grade (-5N) thermal dissipation is rarely a limiting factor in lab environments.
Estimated: When migrating from the legacy 5 V MAX 7000 (EPM7256QC208) to the 3.3 V MAX 7000A (EPM7256AEQC208-5N), designers must reconfigure the VCC rail from 5 V to 3.3 V - applying 5 V will permanently damage the device. Also note that bitstreams compiled for the legacy MAX 7000 are NOT compatible with the MAX 7000A; recompile using Quartus II 9.1 or later. Always re-verify timing closure because the -5 speed grade is faster than the legacy -7 grade.
규정 준수 정보
Lead-free ('N' suffix) per Altera part numbering convention. RoHS, REACH, halogen-free, and conflict-mineral status not stated in the verified web data; consult factory certificate of conformance before RoHS-critical placements.