Texas Instruments

INA143U/2K5 - 10V/V Differential Amplifier | Texas Instruments

部品番号: INA143U/2K5 ✓ 生産中
±250 mV maximum Vdss 950 mA Id 8-SOIC (D), 0.154 inch nominal width Package
MOQ: 1 |

INA143U/2K5 概要

The Texas Instruments INA143U/2K5 is a precision difference amplifier with a fixed gain of 10 V/V, a slew rate of 5 V/µs, and an offset voltage of ±250 mV maximum, housed in an 8-pin SOIC package. It is designed to extract small differential signals from larger common-mode voltages in instrumentation, industrial-control, and signal-conditioning systems.

A difference amplifier is a specialized operational-amplifier circuit that amplifies the voltage difference between two inputs while rejecting voltage shared by both inputs. The INA143 belongs to the instrumentation-amplifier and differential-amplifier hierarchy within the broader linear-IC and signal-conditioning categories. Its internal design provides fixed gain without requiring external gain-setting resistors, helping reduce component count and gain-setting variation.

Key features include selectable gain configurations of 10 V/V or 0.1 V/V within the INA143 family, low gain error of 0.01% maximum, fast settling to 0.01% in 9 ms, and a wide supply range from ±2.25 V to ±18 V. These characteristics suit systems that require accurate differential measurement while operating from dual supplies. The listed operating-temperature range is −40 °C to +85 °C.

The INA143U/2K5 uses internal resistor matching to establish its gain and supports operation with dual positive and negative supplies. Its 5 V/µs slew rate allows the output to respond quickly to input transitions, while the 9 ms settling specification supports applications that repeat measurements at a moderate rate. The 8-SOIC package also provides a compact surface-mount option for industrial and analog signal-chain equipment.

Typical uses include bridge-transducer interfaces, current-loop measurement, laboratory instrumentation, industrial sensor conditioning, and cancellation of common-mode noise in differential sensor outputs. When selecting a circuit, verify the input common-mode range, output swing, supply arrangement, and required settling time against the manufacturer datasheet.

For PCB implementation, treat the input, feedback, reference, and supply connections as sensitive analog paths. Keep input traces short, use a stable reference connection when the output requires an offset, and decouple each supply rail close to the device. Avoid long copper runs between the amplifier and high-impedance sensor nodes to minimize coupled noise and capacitance-related settling changes.

This product page combines the manufacturer specifications with package information, application guidance, and drop-in comparison options. The comparison material highlights the fixed gain, supply range, slew rate, offset, package, and temperature constraints that should be reviewed before replacing an existing INA143U/2K5 in a production design.

ドロップイン代替品: INA143U/2K5 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: INA143U/2K5 (同一形状・フットプリント) — 相違点: Gain Error, Operating Temperature Range, Package.

Texas Instruments
Gain Error: 0.01%
Operating Temperature Range: -40 C to 85 C
Package: 8-SOIC, 0.154 in width, 3.90 mm width

INA143U

✅ ドロップイン
Texas Instruments
📦 8-SOIC (D)
Precision difference amplifier · 1 circuit · 5 V/us · 250 uV · 3 uV/C · 10 V/V or 0.1 V/V · 0.01% · 0.1 V

価格はお問い合わせください

データシートを見る →

INA143U/2K5E4

✅ ドロップイン
📦 8-SOIC (D)
Same INA143 electrical configuration and 8-SOIC package; gain, ±250 mV offset, 5 V/µs slew rate, and −40 °C to +85 °C operating range show a 0% specified difference, subject to suffix-specific qualification review.

📋 参考代替品(カタログ未掲載)

INA132U/2K5

✅ ドロップイン
Texas Instruments
📦 8-SOIC (D)
Single-supply difference amplifier · 1 circuit · 2.5 V/V · 2.7 V to 36 V · ±15 V · ±1.35 V · ±18 V · -40 °C to +85 °C

価格はお問い合わせください

データシートを見る →

INA148UA/2K5

✅ ドロップイン
📦 8-SOIC (D)
Same 8-SOIC differential-amplifier format, but the INA148 family has different gain and performance characteristics from the 10 V/V INA143U/2K5; the gain difference must be confirmed before substitution.

📋 参考代替品(カタログ未掲載)

AD8278ARZ

✅ ドロップイン
📦 8-SOIC (D)
Same 8-SOIC package form, but independently specified gain, bandwidth, slew rate, offset, input range, supply range, and output swing may differ from the INA143U/2K5; verify each critical parameter in the manufacturer datasheet.

📋 参考代替品(カタログ未掲載)

INA143U/2K5 最大定格&電気的特性

Amplifier Type Precision difference amplifier
Number of Circuits 1 circuit
Fixed Gain 10 V/V
Alternative Family Gain 0.1 V/V
Gain Error 0.01% maximum
Offset Voltage ±250 mV maximum
Offset Voltage Temperature Drift ±3 mV/°C maximum
Slew Rate 5 V/µs
Settling Time 9 ms to 0.01%
Bandwidth 150 kHz
静止電流 950 mA
Supply Voltage Range ±2.25 V to ±18 V
動作温度範囲 −40 °C to +85 °C
パッケージ 8-SOIC (D), 0.154 inch nominal width
ピン数 8 pins
実装タイプ Surface mount

INA143U/2K5 ピン構成

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
ピン 1 −IN — Inverting input
ピン 2 +IN — Noninverting input
ピン 3 V− — Negative supply connection
ピン 4 REF — Reference input
ピン 5 OUT — Amplified output
ピン 6 V+ — Positive supply connection
ピン 7 +IN — Noninverting input
ピン 8 −IN — Inverting input

主な用途

INA143U/2K5 の用途: 6 件s: Bridge Transducer Signal Conditioning, Industrial Sensor Amplification, Current Loop Measurement, Laboratory Instrumentation, Common-Mode Noise Rejection, Data Acquisition Front End.

🏭

Bridge Transducer Signal Conditioning

The INA143U/2K5 fits bridge-based pressure, strain, and load-cell interfaces that produce a small differential signal on top of a larger common-mode voltage. Its fixed 10 V/V gain avoids external gain-setting resistors, while the specified 0.01% maximum gain error and ±250 mV maximum offset support controlled measurement-chain behavior. Place the amplifier close to the bridge inputs, use short guarded traces, and verify that the bridge excitation voltage keeps both inputs inside the amplifier’s common-mode range. The dual supply capability of ±2.25 V to ±18 V supports bipolar bridge excitation, although the exact excitation level must be checked against the input and output limits in the manufacturer datasheet.

🧩

Industrial Sensor Amplification

The INA143U/2K5 is appropriate for industrial sensor outputs where a differential voltage must be converted into a stronger signal for an ADC or controller. The 10 V/V fixed gain reduces circuit complexity, and the 5 V/µs slew rate supports faster transitions than a low-speed precision amplifier. Its ±2.25 V to ±18 V supply range allows operation from compact dual analog rails to higher industrial voltage spans. For reliable results, establish an analog ground reference near the sensor, decouple each supply rail at the package, and avoid routing the sensor directly beneath digital clock or switching nodes. Verify settling time when the measurement system must resolve small changes rapidly after an input step.

⚡

Current Loop Measurement

The INA143U/2K5 can amplify the differential voltage generated by a current-sense shunt or precision current-measurement circuit. Its fixed gain of 10 V/V provides predictable scaling, while low offset and low gain error help preserve measurement accuracy. The device is best placed after a low-value shunt so that the amplifier does not exceed its common-mode input limits, and Kelvin-style routing should be used to prevent voltage drops in the shunt traces from appearing as measurement error. Bypass each supply rail with local high-frequency decoupling and connect the signal-reference pin to the measurement ground through the arrangement specified by the manufacturer datasheet. The 9 ms settling specification should be checked against the required loop response.

🔧

Laboratory Instrumentation

The INA143U/2K5 suits laboratory front ends that measure small differential signals in the presence of common-mode voltage. The 10 V/V gain, 0.01% maximum gain error, and ±250 mV maximum offset provide a defined starting point for precision measurement circuitry. Use the reference connection to establish the output operating point required by the following stage, and keep sensitive input nodes away from switching regulators and high-current return paths. Because the listed bandwidth is 150 kHz, the device is better matched to moderate-bandwidth measurements than to wideband waveform systems. For instrumentation requiring faster settling, use the manufacturer’s timing and output-swing curves to establish the usable operating bandwidth.

🌐

Common-Mode Noise Rejection

The INA143U/2K5 is useful when the wanted information is carried as a small differential voltage and unwanted voltage appears equally on both signal inputs. Its difference-amplifier architecture provides common-mode rejection, allowing the circuit to suppress shared disturbances more effectively than a single-ended amplifier arrangement. Place the two input paths symmetrically so that coupling from nearby switching nodes is balanced, and keep the input impedance consistently loaded on both channels. Verify the operating frequency against the specified 150 kHz bandwidth and confirm the input common-mode range. The 5 V/µs slew rate helps preserve timing margin when the differential signal changes quickly.

🖥️

Data Acquisition Front End

The INA143U/2K5 can provide the analog gain stage ahead of an ADC in a data-acquisition system. Its fixed 10 V/V gain increases the useable span of a low-level differential input without adding external gain resistors, while the low gain error and specified offset establish predictable scale factors. Place the amplifier and its decoupling capacitors close to the ADC source, route the differential pair together, and provide a clean reference to the acquisition ground. The listed 9 ms settling time is suitable for many moderate-rate measurement channels but may limit very fast conversion sequences. Verify the ADC acquisition window, amplifier settling, and output-voltage limits together rather than optimizing each block independently.

おすすめ製品の概要

INA143U Texas Instruments 使用用途: Bridge Transducer Signal Conditioning, Current Loop Measurement, Data Acquisition Front End AD8278ARZ Cross-brand 8-SOIC difference amplifier candidate 使用用途: Bridge Transducer Signal Conditioning, Current Loop Measurement, Common-Mode Noise Rejection INA143U/2K5E4 Same-family ordering alternative 使用用途: Industrial Sensor Amplification, Laboratory Instrumentation, Data Acquisition Front End INA132U/2K5 Texas Instruments 使用用途: Industrial Sensor Amplification, Common-Mode Noise Rejection INA148UA/2K5 Texas Instruments 8-SOIC alternative to evaluate 使用用途: Laboratory Instrumentation
What is the INA143U/2K5?
The INA143U/2K5 is a single-channel, fixed-gain precision difference amplifier from Texas Instruments. It provides a gain of 10 V/V, a slew rate of 5 V/µs, an offset voltage of ±250 mV maximum, and an 8-SOIC package. According to the manufacturer product page, it is intended for high-speed differential signal conditioning where the desired input difference must be amplified while common-mode voltage is rejected.
What is the operating voltage range of INA143U/2K5?
The INA143U/2K5 operates from ±2.25 V to ±18 V, meaning that the total supply span can range from 4.5 V to 36 V. The manufacturer datasheet identifies dual positive and negative supply operation as part of the INA143 family design. Confirm the required input common-mode range and output swing at the selected supply voltage before using the amplifier with bipolar sensor signals.
What is the gain of INA143U/2K5?
The INA143U/2K5 has a fixed gain of 10 V/V. The manufacturer describes the INA143 family as supporting gain configurations of 10 V/V or 0.1 V/V, while this orderable variant corresponds to the 10 V/V configuration. The specified maximum gain error is 0.01%, making it useful when repeatable closed-loop amplification is more important than adjustable gain.
Where can I download the INA143U/2K5 datasheet PDF?
The official INA143U/2K5 documentation is available from the Texas Instruments product page at https://www.ti.com/product/INA143. Use the manufacturer datasheet to verify the complete electrical characteristics, pin assignments, input common-mode limits, output swing, supply-current behavior, and recommended application circuit. An independent copy of the datasheet is also listed at https://www.alldatasheet.com/datasheet-pdf/pdf/847501/TI1/INA143U/2K5.html.
Where can I find the INA143U/2K5 pinout?
The INA143U/2K5 pinout is found in the pin-configuration section of the manufacturer datasheet and corresponds to the 8-SOIC package. The package has eight numbered pins and a standard 0.154-inch nominal body width. Use the package drawing and pin-description table together when assigning PCB nets, because the SOIC top-side numbering and physical lead positions must be kept in the same orientation.
Is the INA143U/2K5 suitable for bridge-transducer measurement?
The INA143U/2K5 is suitable for many bridge-transducer signal-conditioning circuits because it offers a fixed 10 V/V gain, 0.01% maximum gain error, and ±250 mV maximum offset. Its dual supply range of ±2.25 V to ±18 V supports bipolar excitation and measurement conditions. The circuit must also remain within the amplifier’s input common-mode range, which must be checked in the manufacturer datasheet for the selected bridge excitation.
What are the key specifications of INA143U/2K5 that engineers should know?
The INA143U/2K5 combines a 10 V/V fixed gain with a 5 V/µs slew rate, ±250 mV maximum offset, 0.01% maximum gain error, and 9 ms settling to 0.01%. It operates from ±2.25 V to ±18 V and is packaged in an 8-SOIC. According to the Texas Instruments product page, these characteristics position the device for precision, high-speed differential measurement.
INA143U/2K5 vs INA143U/2K5E4 - which is better?
The INA143U/2K5 and INA143U/2K5E4 belong to the same Texas Instruments INA143 family, but the ordering suffix identifies different qualification or delivery configurations that should be reviewed before substitution. Both are associated with the 8-SOIC differential-amplifier family and its 10 V/V gain configuration. Use the manufacturer part-detail pages to confirm temperature grade, quality status, packing, and lifecycle terms for the exact production requirement.
When should I choose INA143U/2K5 over INA132U/2K5?
Choose the INA143U/2K5 when the design benefits from the INA143 family’s stated 5 V/µs slew rate, ±250 mV maximum offset, 0.01% maximum gain error, and 9 ms settling to 0.01%. The INA132U/2K5 is a separate difference-amplifier family with its own electrical limits, so it should not be treated as an automatic substitute. Compare settling behavior, common-mode range, output swing, and supply requirements directly in both datasheets.
What can replace the INA143U/2K5?
The closest same-family starting point is the Texas Instruments INA143U, which is identified as an 8-SOIC difference amplifier with the same 10 V/V or 0.1 V/V family gain concept. However, the exact INA143U/2K5 suffix must be reviewed for gain configuration, packing, and orderable status. Cross-family candidates such as INA132U/2K5 and AD8278ARZ require complete electrical and pin-function verification rather than an assumption that an 8-pin package alone guarantees compatibility.
Is the INA143U/2K5 the same as the INA143U?
The INA143U/2K5 is an orderable member of the INA143 family with a fixed 10 V/V gain configuration, while INA143U is another ordering option in the same 8-SOIC product family. The precise suffix may affect packing, grade, or configuration, so engineers should compare the exact manufacturer part-detail pages and orderable-device notes. The manufacturer lists both devices as active 8-pin differential amplifiers.
What is the best Analog Devices equivalent for INA143U/2K5?
The AD8278ARZ is an Analog Devices 8-SOIC difference amplifier that appears in a compatibility discussion for the INA132U/2K5 and is the most relevant cross-brand candidate identified for this family of devices. It should not be treated as a guaranteed drop-in replacement because gain configuration, bandwidth, slew rate, common-mode range, offset, supply requirements, and output swing must be compared. Review both manufacturer datasheets before approving the substitution.
How much bandwidth does INA143U/2K5 have?
The INA143U/2K5 is listed with a bandwidth of 150 kHz, while the manufacturer highlights its 5 V/µs slew rate and 9 ms settling to 0.01%. Bandwidth and settling time describe different aspects of dynamic performance: the former concerns small-signal frequency response, while the latter describes how accurately the output reaches its final value after a transition. Both figures should be considered for step-response and precision-measurement designs.
Where can I buy INA143U/2K5 online?
The INA143U/2K5 can be requested through the Request a Quote form on this page, where current commercial terms and availability can be confirmed for the exact 8-SOIC ordering code. The manufacturer product page also provides purchasing links and the part-details table. Confirm the full suffix, package, and required quantity when submitting a request so the quotation matches the intended orderable device.
What is the lead time for INA143U/2K5?
Request the current INA143U/2K5 lead time through the Request a Quote form on this page. Texas Instruments lists the device as active, but production timing can vary with order quantity, packing configuration, and inventory. For a new design, request the exact MPN and expected annual usage rather than relying on a generic family lead time or an unreferenced warehouse estimate.
Is INA143U/2K5 in stock and what is its price?
Use the Request a Quote form on this page to check current stock, unit pricing, and order terms for the exact INA143U/2K5. Texas Instruments identifies the device as active, and distributor search listings indicate market availability, but quantity-dependent pricing and fulfillment status change over time. The quotation request should specify the required quantity and whether tape-and-reel or tube packing is needed.

エンジニアリング参考データ: INA143U/2K5 — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the INA143U/2K5 when the design needs a fixed 10 V/V differential gain, a 5 V/µs slew rate, 0.01% maximum gain error, and operation from ±2.25 V to ±18 V in an 8-SOIC footprint. INA143U is the closest same-family ordering option when its exact suffix configuration meets production requirements. INA143U/2K5E4 should be considered when its orderable qualification or delivery configuration is preferable. Evaluate INA132U/2K5 when its family performance better meets the required bandwidth, settling, or common-mode limits. INA148UA/2K5 is appropriate only if its gain and dynamic characteristics align with the sensor. AD8278ARZ offers a cross-brand 8-SOIC candidate, but approval requires a full comparison of gain, input range, output swing, offset, supply voltage, and timing. For every substitution, verify the exact pin functions and manufacturer datasheet limits rather than relying only on package dimensions.

代替品との比較

パラメータ この製品 INA143U INA143U/2K5E4 INA132U/2K5 INA148UA/2K5 AD8278ARZ
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Analog Devices
Package 8-SOIC (D) 8-SOIC (D) 8-SOIC (D) 8-SOIC (D) 8-SOIC (D) 8-SOIC (D)
Differential Input Support Difference amplifier Difference amplifier Difference amplifier Difference amplifier Difference amplifier Difference amplifier

主な差別化要因

  • Matches the same-family 10 V/V gain configuration and 8-SOIC footprint (vs INA143U)
  • Combines 10 V/V gain with a 5 V/µs slew rate (vs INA132U/2K5)
  • Uses a manufacturer-defined 150 kHz bandwidth and 9 ms settling specification (vs AD8278ARZ)
  • Supports bipolar operation from ±2.25 V to ±18 V (vs INA148UA/2K5)

設計ノート

Keep the two input nets short, closely coupled, and symmetrical so that noise or parasitic capacitance affects both inputs similarly. Place the INA143U/2K5 near the sensor or source connector, and avoid routing sensitive inputs beneath switching nodes, high-current supply paths, and digital return currents. Use a continuous ground plane where practical, but partition high-current return paths so their magnetic fields do not couple into the input loop.

Decouple the positive and negative supply pins independently with capacitors placed directly beside the corresponding package pins. Select capacitor voltage ratings and effective capacitance for the operating frequency because ceramic capacitance can decrease substantially with bias. Confirm the complete supply range, quiescent-current behavior, and output-swing limits in the manufacturer datasheet. Estimated power dissipation is equal to the total supply voltage multiplied by supply current only after accounting for the actual output operating point; no specific thermal estimate is asserted without those circuit conditions.

Do not assume that an 8-SOIC footprint proves functional compatibility. Before replacing the INA143U/2K5, compare gain, input common-mode range, output swing, supply voltage, reference behavior, offset, bandwidth, slew rate, and settling time. Pay particular attention to the fixed 10 V/V gain and the INA143 family’s gain-configuration pins. Validate the substitute across temperature, supply tolerance, source impedance, and sensor excitation conditions rather than checking nominal values alone.

The listed 150 kHz bandwidth and 9 ms settling to 0.01% define separate limits on sinusoidal and step-response behavior. For an ADC front end, include the amplifier’s settling interval in the acquisition timing and ensure the source impedance produces the response expected by the manufacturer model. If the input is AC-coupled, check that the coupling network does not create additional phase error or an unintended low-frequency corner.

INA143U/2K5 uses an 8-SOIC package, so copper area and airflow affect thermal performance. Estimated junction temperature is the ambient temperature plus the calculated power dissipation multiplied by the effective junction-to-ambient thermal resistance. Obtain the input values from the final schematic, package thermal data, and PCB layout before applying that calculation. Increase copper area, improve airflow, or reduce dissipation if the calculated junction temperature exceeds the design limit.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The operating-temperature and package information are listed by Texas Instruments. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the current manufacturer product documentation or orderable-device information.

データ検証日: 2026-11-14 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

INA143U/2K5 datasheet INA143U/2K5 pinout INA143U/2K5 datasheet pdf INA143U/2K5 equivalent INA143U/2K5 replacement INA143U/2K5 drop-in replacement INA143U/2K5 price INA143U/2K5 stock Texas Instruments INA143U/2K5 INA143U/2K5 10V/V difference amplifier INA143U/2K5 8-SOIC INA143U/2K5 bridge sensor amplifier INA143U/2K5 vs INA132U/2K5 INA143U/2K5 common mode rejection

関連部品&用語

Texas Instruments INA143U/2K5 INA143U INA143U/2K5E4 INA132U/2K5 INA148UA/2K5 AD8278ARZ Analog Devices difference amplifier instrumentation amplifier precision amplifier linear integrated circuit signal conditioning common-mode rejection gain error offset voltage slew rate settling time bandwidth quiescent current 8-SOIC SOIC family surface-mount package bridge transducer current-loop measurement
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示