Texas Instruments

INA2126UG4 - 36V Dual Micropower Instrumentation Amplifier | TI

部品番号: INA2126UG4 ✓ 生産中
36 V Vdss 175 µA per channel Id 16-pin SOIC, 3.90 mm width Package
MOQ: 1 |

INA2126UG4 概要

The Texas Instruments INA2126UG4 is a dual 36 V micropower precision instrumentation amplifier with 175 µA quiescent current per channel, 250 µV offset, and differential-signal measurement capability in a 16-pin SOIC package. Its low power consumption and broad supply range suit battery-powered instrumentation, portable measurement systems, and low-current industrial sensors.

An instrumentation amplifier is a signal-conditioning IC that amplifies the voltage difference between two input terminals while rejecting common-mode interference. The INA2126 belongs to the precision instrumentation amplifier hierarchy and supports accurate differential-signal acquisition. Its two-op-amp architecture combines low quiescent current with a wide operating-voltage range of ±1.35 V to ±18 V.

Key features include 175 µA of quiescent current per channel, 250 µV offset, and operation from a single 2.7 V supply or from dual ±18 V rails. The device is intended for low-level differential measurements where battery life, signal integrity, and compactness are important. Two channels in one package can reduce board area when multiple sensor inputs must be conditioned.

The 36 V maximum supply gives designers substantial transient and common-mode headroom in industrial environments, although the input common-mode range remains dependent on the selected supply and gain configuration. The precision-oriented internal architecture is intended to preserve small differential signals while reducing supply and common-mode errors. Designers should review gain, input range, output swing, and supply limits in the manufacturer datasheet before fixing system operating conditions.

Typical uses include bridge-sensor interfaces, current-shunt measurements, portable multimeter circuits, battery-powered sensor acquisition, medical monitoring equipment, and industrial process-control inputs. The low 175 µA-per-channel quiescent current is particularly valuable in portable systems where amplifier current directly affects available battery runtime.

Decoupling and layout are critical because the instrument-amplifier pins connect directly to low-level sensor signals. Place the supply bypass capacitor close to the positive and negative supply pins, connect the input return paths close to the amplifier, and use the differential inputs symmetrically. Validate the complete gain, common-mode range, output swing, noise, and settling-time combination on the target board.

ドロップイン代替品: INA2126UG4 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: INA2126UG4 (同一形状・フットプリント) — 相違点: Package, Mounting Type, Architecture, Channel Count, Quiescent Current.

Texas Instruments
Package: 8-pin PDIP
Mounting Type: Through-hole
Architecture: Two-op-amp instrumentation amplifier
比較対象 INA2126UG4 →
Texas Instruments
Package: 16-pin SOIC
比較対象 INA2126UG4 →

INA2126U

✅ ドロップイン ⚠️ 仕様未検証
Texas Instruments
📦 16-pin SOIC
Dual precision instrumentation amplifier · 2 channels · 36 V · ±1.35 V to ±18 V · 2.7 V · 36 V · 175 µA · 250 µV

価格はお問い合わせください

データシートを見る →

INA2126UI

✅ ドロップイン ⚠️ 仕様未検証
📦 16-pin SOIC
Same 36 V and 175 µA-per-channel core ratings; industrial-ordering attributes differ by 0 V and 0 µA

📋 参考代替品(カタログ未掲載)

INA2126UIT

✅ ドロップイン ⚠️ 仕様未検証
📦 16-pin SOIC
Same 36 V and 175 µA-per-channel core ratings; temperature and shipment attributes differ by 0 V and 0 µA

📋 参考代替品(カタログ未掲載)

INA2126UIR

✅ ドロップイン ⚠️ 仕様未検証
📦 16-pin SOIC
Same 36 V and 175 µA-per-channel core ratings; reel-ordering attributes differ by 0 V and 0 µA

📋 参考代替品(カタログ未掲載)

INA126P

✅ ドロップイン ⚠️ 仕様未検証
Texas Instruments
📦 16-pin SOIC
Precision micropower instrumentation amplifier · Two-op-amp instrumentation amplifier · 36 V · ±1.35 V to ±18 V · 175 µA/channel typical · 250 µV · 1, 10, 100, or 1000 using external resistor · Precision low-noise differential input

価格はお問い合わせください

データシートを見る →

INA2126UG4 最大定格&電気的特性

Device Type Dual precision instrumentation amplifier
Channel Count 2 channels
Maximum Supply Voltage 36 V
Supply Voltage Range ±1.35 V to ±18 V
Single-Supply Minimum 2.7 V
静止電流 175 µA per channel
Offset Voltage 250 µV
Architecture Two-op-amp instrumentation-amplifier design
Input Type Differential
Signal Type Low-level differential-signal acquisition
パッケージ 16-pin SOIC, 3.90 mm width
実装タイプ Surface mount

INA2126UG4 16-pin soic, 3.90 mm width ピン配置ガイド

INA2126UG4 (16-pin soic, 3.90 mm width パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。

INA2126UG4 の 16-pin soic, 3.90 mm width パッケージピン配置図

詳細なピン配置データはありません: INA2126UG4.

詳細は データシート をご参照ください。

主な用途

INA2126UG4 の用途: 6 件s: Battery-Powered Sensor Acquisition, Bridge-Sensor Signal Conditioning, Portable Multimeter Measurement, Current-Shunt Monitoring, Medical Monitoring Front End, Industrial Process Measurement.

🧩

Battery-Powered Sensor Acquisition

The INA2126UG4 fits battery-powered sensor nodes because each channel draws 175 µA of quiescent current and the device can operate from a 2.7 V single supply. Place the dual amplifier near the sensor interface, connect each differential input pair to the corresponding bridge or transducer, and use the available gain configuration to raise the small sensor voltage above the converter noise floor. The 36 V maximum supply also provides useful transient headroom in industrial sensor nodes. Its principal advantage over a discrete amplifier arrangement is the integrated common-mode rejection, gain control, and two-channel integration, which can reduce board area. Check the complete input common-mode range, output swing, settling behavior, and reference configuration against the actual sensor output before finalizing the gain.

🏭

Bridge-Sensor Signal Conditioning

The INA2126UG4 is appropriate for conditioning differential outputs from resistive bridges because it rejects common-mode voltage while preserving the smaller bridge differential signal. Its two channels allow two bridge elements to share one instrumentation-amplifier package, helping reduce board area in multi-axis force, pressure, or position sensors. The 175 µA-per-channel quiescent current supports portable test equipment, while the 36 V maximum supply provides margin for industrial excitation and transient environments. Configure the gain according to the manufacturer’s supported options and verify that the bridge excitation voltage remains inside the amplifier’s input common-mode range. Reference pins should be connected according to the datasheet for single-ended or differential output operation, and unused channel inputs must not be left floating.

📱

Portable Multimeter Measurement

The INA2126UG4 supports portable multimeter and handheld measurement designs where low standby power is necessary between readings. Its dual instrumentation-amplifier channels can condition two low-level differential inputs while the 175 µA-per-channel quiescent current limits continuous battery drain. A practical implementation places the amplifier close to the input selector and protection network, then routes its outputs to an ADC. The device’s 36 V maximum supply is useful when the input network includes protected higher-voltage ranges, although the selected operating mode must preserve the allowed input common-mode range and output swing. Low-level measurement accuracy also depends on the reference implementation, input protection leakage, resistor matching, and PCB leakage, so evaluate the complete analog path rather than relying on amplifier offset alone.

⚡

Current-Shunt Monitoring

The INA2126UG4 can measure the small differential voltage produced across a current-shunt resistor when the shunt signal lies within the amplifier’s permitted input range. The two channels allow simultaneous monitoring of two power or control paths, while the 36 V-class supply capability suits higher-voltage systems requiring input protection. Position the shunt and amplifier to minimize trace resistance and avoid common-mode copper mismatches, because those mismatches convert directly into measurement error. The 175 µA-per-channel idle current also makes the device practical in portable battery equipment. Before selecting the gain, confirm that both the shunt voltage and common-mode voltage satisfy the manufacturer’s operating limits, and verify output swing at the required load. Add input filtering carefully so that shunt inductance does not create unstable or excessively delayed measurements.

💊

Medical Monitoring Front End

The INA2126UG4 can serve as the analog front end for low-level differential monitoring signals when its specified electrical limits match the sensing architecture. The dual-channel arrangement supports paired sensing paths, and the 175 µA-per-channel quiescent current is beneficial in compact monitoring equipment. Its precision instrumentation-amplifier topology is intended to reject common-mode interference present on long sensor connections. Nevertheless, medical-system designers must independently validate input limits, protection behavior, isolation boundaries, leakage, noise, and applicable quality requirements; the component’s instrumentation-amplifier role does not itself establish medical certification. Keep sensitive input traces short, guard them appropriately, use clean references, and confirm the achieved noise and accuracy at the intended gain and bandwidth before using the circuit for patient-connected measurements.

⚙️

Industrial Process Measurement

The INA2126UG4 is suitable for industrial process-measurement inputs where a small differential voltage must be amplified in the presence of a larger common-mode potential. Its 36 V maximum supply provides useful operating headroom, and two channels can monitor related variables without requiring two separate instrumentation-amplifier packages. The 175 µA-per-channel quiescent current favors distributed low-power sensing nodes. Use short differential routes, a solid ground reference, and supply bypass capacitors close to the device, while avoiding long unprotected traces adjacent to switching equipment. Validate the selected gain against the input common-mode range and output swing, and account for offset and gain error at the actual temperature. If the source is a resistive sensor with a non-grounded output, verify the reference connection in the manufacturer’s typical application circuit before fabrication.

おすすめ製品の概要

INA2126 Parent dual instrumentation-amplifier device 使用用途: Battery-Powered Sensor Acquisition, Bridge-Sensor Signal Conditioning, Portable Multimeter Measurement, Current-Shunt Monitoring, Medical Monitoring Front End, Industrial Process Measurement INA126 Related INAx126 instrumentation-amplifier family 使用用途: Battery-Powered Sensor Acquisition, Bridge-Sensor Signal Conditioning, Portable Multimeter Measurement, Current-Shunt Monitoring, Medical Monitoring Front End, Industrial Process Measurement
What is the INA2126UG4?
The INA2126UG4 is a Texas Instruments dual precision instrumentation amplifier for low-level differential-signal acquisition. According to the manufacturer datasheet, the device uses a two-op-amp architecture, consumes 175 µA per channel, supports an operating range of ±1.35 V to ±18 V, and is offered in a 16-pin SOIC package.
What are the key specifications of INA2126UG4?
The INA2126UG4 combines two instrumentation-amplifier channels, a 36 V maximum supply, 175 µA quiescent current per channel, and 250 µV offset voltage in a 16-pin SOIC. The manufacturer identifies it as a precision, micropower device intended for accurate differential-signal acquisition in portable instrumentation and data-acquisition systems.
What is the operating voltage of INA2126UG4?
The INA2126UG4 operates from ±1.35 V to ±18 V and can therefore be used with a 2.7 V single supply or with split supplies of the same total magnitude. According to the Texas Instruments datasheet, the maximum total supply voltage is 36 V, subject to the detailed absolute-maximum ratings in that document.
How much current does INA2126UG4 consume?
The INA2126UG4 consumes 175 µA of quiescent current per channel, as stated in the Texas Instruments product description and manufacturer datasheet. This low idle current makes the amplifier suitable for portable instruments and battery-operated sensor interfaces, although total system demand also includes output-current and reference-circuit requirements.
Where can I download the INA2126UG4 datasheet PDF?
The official INA2126UG4 datasheet is available through Texas Instruments at https://www.ti.com/lit/gpn/INA2126. The manufacturer datasheet contains the recommended operating conditions, gain configuration, pin descriptions, supply limits, electrical characteristics, and typical application circuits needed for design review.
Where can I find the INA2126UG4 pinout?
The INA2126UG4 pinout is documented in the pin-configuration section of the Texas Instruments INA2126 datasheet. The component uses a 16-pin SOIC package, so use the 16-pin package drawing and pin-description table when assigning PCB nets, especially the input, reference, output, and supply connections.
Where can I buy INA2126UG4 and request a quote?
Use the “Request a Quote” form on this page to request INA2126UG4 pricing, stock confirmation, and lead time. The quote team can confirm the exact 16-pin SOIC ordering code, current inventory, and order quantity without relying on a static price that may change.
What is the price of INA2126UG4?
Current INA2126UG4 pricing is not published as static text because market conditions and quantities can change. Submit the part number and required quantity through the “Request a Quote” form on this page for a current response, including unit pricing, stock status, and available shipment options.
What is the lead time for INA2126UG4?
The current lead time depends on inventory, order quantity, and packaging requirements. Request a quote through the form on this page to obtain a current production estimate and stock confirmation for the exact INA2126UG4 16-pin SOIC ordering code.
Is INA2126UG4 currently in stock?
Stock status changes with procurement activity, so use the “Request a Quote” form on this page for a current inventory answer. Include the required quantity and shipment destination in the request, and specify whether reels, cut tape, or another approved delivery format is required.
Is INA2126UG4 suitable for battery-powered sensor acquisition?
Yes, the INA2126UG4 is suitable for battery-powered sensor acquisition because its 175 µA-per-channel quiescent current is designed for low-power instrumentation. The device also supports 2.7 V single-supply operation, helping reduce the number of power-conversion stages in portable measurement systems.
What can replace INA2126UG4 as a drop-in part?
The INA2126U and INA2126UI are the closest same-brand 16-pin SOIC options identified from the INAx126 family. They retain the 175 µA-per-channel, 36 V-class instrumentation-amplifier function, but the manufacturer’s ordering table must be checked for exact temperature grade, gain configuration, marking, and qualification requirements before substitution.
Is INA2126UG4 the same as INA2126U?
The INA2126UG4 and INA2126U are closely related Texas Instruments orderable versions in the same 16-pin SOIC instrumentation-amplifier family. They share the core 36 V, 175 µA-per-channel architecture, while the exact suffix controls ordering and qualification attributes. Confirm those attributes in the manufacturer ordering table before production use.
When should I choose INA2126UG4 instead of INA126P?
Choose INA2126UG4 when a two-channel, 36 V micropower instrumentation-amplifier solution is preferred, while considering INA126P only after confirming its exact pin, gain, supply, and channel requirements. The INA2126UG4 provides two channels and 175 µA per channel within the INAx126 family, making it convenient for compact dual-sensor acquisition.
What is the best cross-brand equivalent for INA2126UG4?
No verified cross-brand, pin-to-pin 16-pin SOIC equivalent was established for the INA2126UG4. A valid replacement must match the pin functions, gain architecture, 36 V supply capability, 175 µA-class operating current, common-mode range, and output swing. Use the manufacturer’s cross-reference tools and confirm every electrical limit before changing suppliers.

エンジニアリング参考データ: INA2126UG4 — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the INA2126UG4 when a design needs two precision differential-measurement channels, a 36 V-class supply limit, and 175 µA of quiescent current per channel in a 16-pin SOIC. Its dual architecture is especially useful for paired sensors, bidirectional instrumentation, and portable equipment where reducing package count and standby demand matter. The INA2126U and INA2126UI are close same-family alternatives when their specific ordering attributes better fit production requirements, but confirm the exact suffix, temperature range, qualification, and marking in the manufacturer ordering table. Consider INA126P only when its channel count and gain organization meet the system requirements and its exact pin behavior has been confirmed. No verified cross-brand drop-in replacement was established, so a substitute should not be approved solely because it is described as a micropower instrumentation amplifier. Final selection must also verify common-mode range, output swing, reference configuration, bandwidth, noise, and protection requirements.

代替品との比較

パラメータ この製品 INA2126U INA2126UI INA126P
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC
Maximum Supply Voltage 36 V 36 V 36 V 36 V
Supply Voltage Range ±1.35 V to ±18 V ±1.35 V to ±18 V ±1.35 V to ±18 V ±1.35 V to ±18 V
Quiescent Current 175 µA per channel 175 µA per channel 175 µA per channel 175 µA per channel

主な差別化要因

  • Two measurement channels in one package (vs INA126P)
  • Low quiescent demand for portable systems (vs INA2126U)
  • 36 V supply capability (vs INA2126UI)

設計ノート

Route each differential input as a closely coupled pair and connect the pair to the amplifier input pins without long stubs. Place the supply bypass capacitor directly between the supply pins and ground, and keep the reference connections short. Differential input traces should avoid switching-node copper and noisy digital return paths because common-mode conversion and parasitic pickup can dominate the small signal being measured.

Check the selected gain against the complete input common-mode range and output-voltage swing before schematic sign-off. The 175 µA-per-channel quiescent current indicates low intrinsic demand, but the input bias current, output load, reference current, and protection-network leakage still affect accuracy. Use the manufacturer’s gain and reference configuration diagrams rather than connecting both reference pins or both channels in an assumed manner.

Do not treat the 36 V maximum supply rating as permission to exceed the input common-mode range. A high-side shunt or powered sensor can exceed the permitted input voltage even when the power rails are correct. Add protection appropriate to the signal source, verify absolute-maximum limits after transients, and ensure unused inputs are biased rather than left floating. Production substitutions should be checked against the complete ordering table.

For low-level measurements, minimize loop area around the sensor, shunt, amplifier, and reference network. Place analog return current away from switching-converter paths and avoid sharing narrow copper segments between high-current and signal returns. If the source is far from the amplifier, account for cable capacitance, shielding, and common-mode range before choosing the highest available gain, since excessive bandwidth can increase noise or instability.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

Compliance declarations were not established for the exact INA2126UG4 ordering code. Check the current Texas Instruments product page and material-compliance documentation before release.

データ検証日: 2026-11-14 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

INA2126UG4 datasheet INA2126UG4 specifications INA2126UG4 pinout INA2126UG4 datasheet pdf Texas Instruments INA2126UG4 INA2126UG4 16-SOIC INA2126UG4 36V instrumentation amplifier INA2126UG4 175uA INA2126UG4 equivalent INA2126UG4 replacement INA2126UG4 vs INA126P INA2126UG4 price INA2126UG4 stock INA2126UG4 application circuit

関連部品&用語

Texas Instruments INA2126UG4 INA2126 INA2126U INA2126UI INA126 INA126P instrumentation amplifier precision instrumentation amplifier differential amplifier signal-conditioning IC semiconductor microPower 175 µA quiescent current 250 µV offset voltage 36 V maximum supply ±1.35 V to ±18 V 2.7 V single supply 16-pin SOIC SOIC package family surface mount bridge sensor current-shunt monitor portable instrumentation battery-powered acquisition
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示