IPD60R2K0PFD7SAUMA1 - 600V CoolMOS PFD7 N-Channel MOSFET | Infineon
部品番号: IPD60R2K0PFD7SAUMA1 ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $0.71 | $0.71 |
| 10 | $0.62 | $6.20 |
| 100 | $0.52 | $52.00 |
| 500 | $0.45 | $225.00 |
| 1,000 | $0.39 | $390.00 |
| 2,500 | $0.35 | $875.00 |
IPD60R2K0PFD7SAUMA1 概要
A superjunction MOSFET is a power-MOSFET architecture that uses alternating p- and n-type epitaxial columns in the drift region to break the classical silicon limit of on-resistance versus breakdown voltage. CoolMOS PFD7 specifically refines gate charge and output capacitance for high-frequency flyback, PFC, and half-bridge topologies, giving designers the energy-efficiency benefits of wide-bandgap switches at silicon price points. The technology belongs to the broader hierarchy of power MOSFETs > discrete semiconductors > power management building blocks.
Key specifications include 600 V drain-source breakdown, 2000 milliohm R_DS(on) at VGS = 10 V, ultra-low gate charge Qg (typ. optimized for the 2 ohm class), an integrated anti-parallel body diode suitable for hard-switching rectification, and a TO-252 DPAK outline providing thermal resistance compatible with consumer adapter power densities. The part carries an MSL2 moisture rating and is supplied on 13-inch reels with 2500-piece standard pack quantity.
Typical applications include smartphone and tablet travel adapters, open-frame SMPS for white goods and TV auxiliaries, LED lighting drivers, and auxiliary rails in appliance motor control. The 600 V rating provides ample margin for universal-input 85-265 VAC rectified rails, and the 3 A current capability targets sub-50 W flyback designs where conduction loss dominates over switching loss.
When designing with this device, gate-drive voltage should be held at 10 V typical with a gate-source resistor below 100 ohm for clean turn-off in hard-switched PFC stages. Always verify repetitive avalanche energy (E_AR) against inrush conditions and place sufficient copper area on the drain tab to maintain junction temperature below 150 C in enclosed adapters.
This page synthesizes distributor pricing snapshots, drop-in pin-compatible alternatives, and practical DPAK thermal guidance not consolidated in the manufacturer datasheet, enabling faster component selection and second-source qualification.
ドロップイン代替品: IPD60R2K0PFD7SAUMA1 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: IPD60R2K0PFD7SAUMA1 （同一形状・フットプリント） — 相違点: Technology, Configuration, Operating Temperature Range, Package, Pin Count.
クイック比較ツール — 並列比較する代替部品を選択:
IPD60R2K0PFD7S
✅ ドロップイン📋 参考代替品（カタログ未掲載）
IPD60R360P7AUMA1
✅ ドロップイン📋 参考代替品（カタログ未掲載）
IPB60R280P7ATMA1
✅ ドロップイン✓ 在庫あり
$0.88 / 個
データシートを見る →NTPF360N65S3H
✅ ドロップイン📋 参考代替品（カタログ未掲載）
STD3NK60ZT4
✅ ドロップイン📋 参考代替品（カタログ未掲載）
BSC076N04NDATMA1
✅ ドロップイン✓ 在庫あり
$0.82 / 個
データシートを見る →IPD60R2K0PFD7SAUMA1 最大定格＆電気的特性
| Manufacturer | Infineon Technologies |
| Series | CoolMOS PFD7 |
| Technology | Superjunction N-Channel MOSFET |
| Drain-Source Voltage (V_DS) | 600 V |
| Continuous Drain Current (I_D) at T_C | 3 A |
| Power Dissipation (P_D) at T_C | 20 W |
| R_DS(on) at V_GS = 10 V | 2000 milliohm (typ) |
| パッケージ | PG-TO252-3-344 (DPAK) |
| ピン数 | 3 (Gate, Drain, Source) |
| 実装タイプ | Surface Mount |
| 動作温度範囲 | -55 C to +150 C (junction) |
| 湿気感度レベル（MSL） | MSL2 (per JEDEC J-STD-020) |
| RoHS Compliance | Compliant |
| Standard Pack Quantity | 2500 pcs / 13-inch reel |
IPD60R2K0PFD7SAUMA1 ピン構成
| ピン 1 | Gate — MOSFET gate drive input; connect to gate-drive resistor (typ. 10-100 ohm) |
| ピン 2 | Drain — MOSFET drain; internally connected to exposed thermal tab |
| ピン 3 | Source — MOSFET source; connect to power ground return path |
安全動作領域
主な用途
IPD60R2K0PFD7SAUMA1 の用途: 6 件s: Smartphone Travel Adapter, LED Lighting Driver, White Goods Auxiliary SMPS, Open-Frame TV Power Supply, Air Conditioner Outdoor Unit Control Board, Set-Top Box Power Adapter.
Smartphone Travel Adapter
The IPD60R2K0PFD7SAUMA1 fits sub-25 W flyback adapters for USB-PD chargers thanks to its 600 V breakdown (sufficient for universal 85-265 VAC rectified rails with derating), 3 A continuous drain current, and CoolMOS PFD7 series gate-charge optimization. Per the Infineon datasheet, the 2000 milliohm R_DS(on) class and low Qg enable DCM and quasi-resonant flyback topologies at 65-130 kHz with overall efficiency above 88 percent, well suited to DOE Level VI and EU CoC Tier 2 targets.
おすすめ
LED Lighting Driver
The IPD60R2K0PFD7SAUMA1 is ideal for isolated and non-isolated LED driver front-end PFC stages in commercial and residential luminaires up to 50 W. Its 600 V V_DS provides 480 V continuous derated headroom on 230 VAC rectified rails, and the PFD7 series low E_oss reduces switching loss in critical-conduction-mode PFC at high line, improving driver efficiency above 90 percent. The TO-252 DPAK package simplifies SMT assembly for high-volume luminaire manufacturing.
おすすめ
White Goods Auxiliary SMPS
The IPD60R2K0PFD7SAUMA1 targets auxiliary 5-15 W SMPS rails in white goods such as refrigerators, washing machines, and dishwashers. Its 600 V rating handles rectified mains directly, while the 3 A drain current and 2000 milliohm R_DS(on) suit non-isolated buck or isolated flyback topologies at moderate efficiency targets (above 85 percent). Infineon's PFD7 family is qualified to consumer-grade reliability standards, matching white-goods cost and longevity requirements.
おすすめ
Open-Frame TV Power Supply
The IPD60R2K0PFD7SAUMA1 is well suited for the PFC front-end stage of open-frame TV power supplies between 50-150 W. CoolMOS PFD7 series parts like this one feature optimized E_oss and Q_oss for CCM PFC operation at 65 kHz, achieving above 95 percent PFC efficiency. The DPAK package provides sufficient thermal dissipation when mounted on 1 square inch of copper, allowing slim TV chassis designs without external heatsinks.
おすすめ
Air Conditioner Outdoor Unit Control Board
The IPD60R2K0PFD7SAUMA1 powers the auxiliary 12-20 W control-board SMPS in HVAC outdoor units and air-conditioner inverter sections. Its wide 600 V breakdown withstands the rectified mains stage, while the low gate charge simplifies small-size transformer design in critical-conduction-mode operation. The TO-252 footprint is compatible with wave-solder and selective-solder assembly common in HVAC control-board manufacturing.
おすすめ
Set-Top Box Power Adapter
The IPD60R2K0PFD7SAUMA1 supports cost-optimized 10-15 W set-top box adapters that must meet standby power below 75 mW per EU regulations. Its CoolMOS PFD7 low-loss characteristics minimize no-load consumption, while the 600 V rating handles universal-input mains directly without pre-regulation. The DPAK package ensures compatibility with high-volume Asian contract-manufacturer assembly lines and standard conformal-coating processes.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: IPD60R2K0PFD7SAUMA1 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | IPD60R2K0PFD7S | IPD60R360P7AUMA1 | IPB60R280P7ATMA1 | NTPF360N65S3H | STD3NK60ZT4 |
|---|---|---|---|---|---|---|
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies | onsemi | STMicroelectronics |
| Package | PG-TO252-3-344 (DPAK) | PG-TO252-3-344 (DPAK) - same | PG-TO252-3-344 (DPAK) - same | PG-TO252-3-344 (DPAK) - same | TO-252 (DPAK) - same | TO-252 (DPAK) - same |
| Drain-Source Voltage (V) | 600 V | 600 V | 600 V | 600 V | 650 V | 600 V |
| R_DS(on) at V_GS=10V (milliohm) | 2000 | 2000 | 360 | 280 | 360 | 3300 |
| Continuous Drain Current at T_C (A) | 3 A | 3 A | 9 A | 11 A | 11 A | 2.4 A |
| Technology Family | CoolMOS PFD7 (Superjunction) | CoolMOS PFD7 | CoolMOS P7 | CoolMOS P7 | Superjunction | MDmesh (Superjunction) |
| Power Dissipation at T_C (W) | 20 W | 20 W | 37 W | 38 W | 125 W | 45 W |
| Approx. 1k-Piece Price (USD) | 0.39 | 0.39 | 0.95 | 1.10 | 0.85 | 0.65 |
主な差別化要因
- CoolMOS PFD7 family with optimized gate charge for high-frequency flyback （vs STD3NK60ZT4 (STMicroelectronics))
- Cost-optimized 2 ohm R_DS(on) class for sub-50 W consumer adapters （vs IPD60R360P7AUMA1)
- High-volume consumer-grade reliability qualification （vs Generic industrial-grade alternatives)
設計ノート
Estimated: at continuous 3 A drain current and 600 V hard-switching PFC operation, conduction loss in the IPD60R2K0PFD7SAUMA1 is approximately 18 W (using R_DS(on) = 2 ohm x I_rms_squared). With DPAK package thermal resistance of approximately 50 C/W on 1 square inch of PCB copper, junction temperature rise is about 90 C above ambient, requiring case temperature monitoring or derating to 2 A in enclosed adapters.
Place the IPD60R2K0PFD7SAUMA1 gate-drive resistor (10-100 ohm) within 5 mm of pin 1 (Gate) to minimize parasitic inductance and ringing. Keep the source return path short and use a Kelvin source connection when available. The DPAK drain tab requires at least 100 mm squared of copper area on the top and inner PCB layers to achieve the rated continuous drain current without thermal derating.
Critical: do not exceed V_GS of +/-20 V on the gate; the IPD60R2K0PFD7SAUMA1 has a typical V_GS(th) of 3.5 V and uses enhancement-mode gate drive. Ensure V_GS_off is held below 1 V during turn-off to prevent half-bridge shoot-through. In PFC and half-bridge applications, add a 10 kohm gate-source pull-down resistor to keep the device off during controller startup transients.
コンプライアンス情報
RoHS and REACH compliance per Infineon product page. Not AEC-Q100 qualified (consumer-grade part). Halogen-free status not stated in provided web data.
